/* $NetBSD: scsi.c,v 1.19 1995/09/03 03:39:38 briggs Exp $ */ /* * This driver is obsolete as of 2 September 1995. mac68k5380.c should * be used instead if at all possible. [briggs 2Sept95] */ /* * Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo, * Michael L. Finch, Bradley A. Grantham, and * Lawrence A. Kesteloot * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Alice Group. * 4. The names of the Alice Group or any of its members may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #define PSEUDO_DMA 1 static int pdebug = 0; #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi_defs.h" #define PAD(n) u_char n[15] #include #undef PAD #define SCI_PHASE_DISC 0 /* sort of ... */ #define SCI_CLR_INTR(regs) {register int temp = regs->sci_iack;} #define SCI_ACK(ptr,phase) (ptr)->sci_tcmd = (phase) #define SCSI_TIMEOUT_VAL 10000000 #define WAIT_FOR_NOT_REQ(ptr) { \ int scsi_timeout = SCSI_TIMEOUT_VAL; \ while ( ((ptr)->sci_bus_csr & SCI_BUS_REQ) && \ ((ptr)->sci_bus_csr & SCI_BUS_REQ) && \ ((ptr)->sci_bus_csr & SCI_BUS_REQ) && \ (--scsi_timeout) ); \ if (!scsi_timeout) { \ printf("scsi timeout--WAIT_FOR_NOT_REQ---scsi.c, line %d.\n", \ __LINE__); \ goto scsi_timeout_error; \ } \ } #define WAIT_FOR_REQ(ptr) { \ int scsi_timeout = SCSI_TIMEOUT_VAL; \ while ( (((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \ (((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \ (((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \ (--scsi_timeout) ); \ if (!scsi_timeout) { \ printf("scsi timeout--WAIT_FOR_REQ---scsi.c, line %d.\n", \ __LINE__); \ goto scsi_timeout_error; \ } \ } #define WAIT_FOR_BSY(ptr) { \ int scsi_timeout = SCSI_TIMEOUT_VAL; \ while ( (((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \ (((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \ (((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \ (--scsi_timeout) ); \ if (!scsi_timeout) { \ printf("scsi timeout--WAIT_FOR_BSY---scsi.c, line %d.\n", \ __LINE__); \ goto scsi_timeout_error; \ } \ } #ifdef DDB int Debugger(); #else #define Debugger() panic("Should call Debugger here (mac/dev/scsi.c).") #endif typedef unsigned long int physaddr; typedef sci_regmap_t sci_padded_regmap_t; #define NNCR5380 1 struct ncr5380_softc { struct device sc_dev; void *reg_base; int adapter_target; struct scsi_link sc_link; }; /* From Guide to Mac II family hardware, p. 137 */ /* These are "adjusted" in the init routine. */ extern vm_offset_t SCSIBase; static volatile sci_padded_regmap_t *ncr = (sci_regmap_t *) 0x10000; static volatile long *sci_4byte_addr = (long *) 0x6000; static volatile u_char *sci_1byte_addr = (u_char *) 0x12000; static unsigned int ncr5380_adapter_info(struct ncr5380_softc * ncr5380); static void ncr5380_minphys(struct buf * bp); static int ncr5380_scsi_cmd(struct scsi_xfer * xs); static int ncr5380_show_scsi_cmd(struct scsi_xfer * xs); static int ncr5380_reset_target(int adapter, int target); static int ncr5380_poll(int adapter, int timeout); static int ncr5380_send_cmd(struct scsi_xfer * xs); extern void ncr5380_intr(int adapter); extern void spinwait(int); static int scsi_gen(int adapter, int id, int lun, struct scsi_generic * cmd, int cmdlen, void *databuf, int datalen); static int scsi_group0(int adapter, int id, int lun, int opcode, int addr, int len, int flags, caddr_t databuf, int datalen); struct scsi_adapter ncr5380_switch = { ncr5380_scsi_cmd, /* scsi_cmd() */ ncr5380_minphys, /* scsi_minphys() */ 0, /* open_target_lu() */ 0, /* close_target_lu() */ }; /* This is copied from julian's bt driver */ /* "so we have a default dev struct for our link struct." */ struct scsi_device ncr5380_dev = { NULL, /* Use default error handler. */ NULL, /* have a queue, served by this (?) */ NULL, /* have no async handler. */ NULL, /* Use default "done" routine. */ }; extern int matchbyname(); static int ncrprobe(); static void ncrattach(); struct cfdriver ncrscsicd = {NULL, "ncrscsi", ncrprobe, ncrattach, DV_DULL, sizeof(struct ncr5380_softc), NULL, 0}; static int ncr_print(aux, name) void *aux; char *name; { /* printf("%s: (sc_link = 0x%x)", name, (int) aux); return UNCONF; */ } static int ncrprobe(parent, match, aux) struct device *parent; void *match; void *aux; { static int probed = 0; struct ncr5380_softc *ncr5380; if (!mac68k_machine.scsi80) { return 0; } ncr5380 = (struct ncr5380_softc *) match; if (strcmp(*((char **) aux), ncr5380->sc_dev.dv_xname)) { return 0; } if (!probed) { /* * Adjust values based on SCSIBase. */ ncr = (volatile sci_regmap_t *) (SCSIBase + (u_int) ncr); sci_4byte_addr = (volatile long *) (SCSIBase + (u_int) sci_4byte_addr); sci_1byte_addr = (volatile u_char *) (SCSIBase + (u_int) sci_1byte_addr); probed = 1; } return 1; } static void ncrattach(parent, dev, aux) struct device *parent, *dev; void *aux; { int unit = dev->dv_unit; struct ncr5380_softc *ncr5380; int r; ncr5380 = (struct ncr5380_softc *) dev; ncr5380->sc_link.scsibus = unit; ncr5380->sc_link.adapter_target = 7; ncr5380->sc_link.adapter = &ncr5380_switch; ncr5380->sc_link.device = &ncr5380_dev; ncr5380->sc_link.openings = 1; #ifdef SCSIDEBUG ncr5380->sc_link.flags = SDEV_DB1 | SDEV_DB2 /* | SDEV_DB3 | SDEV_DB4 */ ; #endif printf("\n"); config_found(dev, &(ncr5380->sc_link), ncr_print); } #define MIN_PHYS 65536 /* BARF!!!! */ static void ncr5380_minphys(struct buf * bp) { if (bp->b_bcount > MIN_PHYS) { printf("Uh-oh... ncr5380_minphys setting bp->b_bcount = %x.\n", MIN_PHYS); bp->b_bcount = MIN_PHYS; } minphys(bp); } #undef MIN_PHYS static int ncr5380_scsi_cmd(struct scsi_xfer * xs) { int flags, s, r; flags = xs->flags; if (xs->bp) flags |= (SCSI_NOSLEEP); if (flags & ITSDONE) { printf("Already done?"); xs->flags &= ~ITSDONE; } if (!(flags & INUSE)) { printf("Not in use?"); xs->flags |= INUSE; } if (flags & SCSI_RESET) { printf("flags & SCSIRESET.\n"); s = splbio(); ncr5380_reset_target(xs->sc_link->scsibus, xs->sc_link->target); splx(s); return (COMPLETE); } xs->resid = 0; r = ncr5380_send_cmd(xs); xs->flags |= ITSDONE; scsi_done(xs); #ifdef SCSIDEBUG printf("SCSI transfer done.\n"); #endif /* SCSIDEBUG */ switch (r) { case COMPLETE: case SUCCESSFULLY_QUEUED: r = SUCCESSFULLY_QUEUED; if (xs->flags & SCSI_POLL) r = COMPLETE; break; default: break; } return r; } static int ncr5380_show_scsi_cmd(struct scsi_xfer * xs) { u_char *b = (u_char *) xs->cmd; int i = 0; if (!(xs->flags & SCSI_RESET)) { printf("ncr5380(%d:%d:%d)-", xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun); while (i < xs->cmdlen) { if (i) printf(","); printf("%x", b[i++]); } printf("-\n"); } else { printf("ncr5380(%d:%d:%d)-RESET-\n", xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun); } } /* * Actual chip control. */ extern void spinwait(int ms) { while (ms--) delay(1000); } extern void ncr5380_intr(int adapter) { register volatile sci_padded_regmap_t *regs = ncr; SCI_CLR_INTR(regs); regs->sci_mode = 0x00; } extern int ncr5380_irq_intr(void) { register volatile sci_padded_regmap_t *regs = ncr; /* if (regs->sci_csr != SCI_CSR_PHASE_MATCH) printf("scsi_irq_intr called (not just phase match -- " "csr = 0x%x, bus_csr = 0x%x).\n", regs->sci_csr, regs->sci_bus_csr); ncr5380_intr(0); */ return 1; } extern int ncr5380_drq_intr(void) { /* printf("scsi_drq_intr called.\n"); */ /* ncr5380_intr(0); */ return 1; } static int ncr5380_reset_target(int adapter, int target) { register volatile sci_padded_regmap_t *regs = ncr; int dummy; regs->sci_icmd = SCI_ICMD_TEST; regs->sci_icmd = SCI_ICMD_TEST | SCI_ICMD_RST; spinwait(250); /* 250 ms */ regs->sci_icmd = 0; regs->sci_mode = 0; regs->sci_tcmd = SCI_PHASE_DISC; regs->sci_sel_enb = 0; SCI_CLR_INTR(regs); SCI_CLR_INTR(regs); } static int ncr5380_poll(int adapter, int timeout) { } static int ncr5380_send_cmd(struct scsi_xfer * xs) { int s; int sense; #ifdef SCSIDEBUG ncr5380_show_scsi_cmd(xs); #endif s = splbio(); sense = scsi_gen(xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun, xs->cmd, xs->cmdlen, xs->data, xs->datalen); splx(s); if (sense) { switch (sense) { case 0x02: /* Check condition */ /* printf("check cond. target %d.\n", xs->targ);*/ s = splbio(); scsi_group0(xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun, 0x3, 0x0, sizeof(struct scsi_sense_data), 0, (caddr_t) & (xs->sense), sizeof(struct scsi_sense_data)); splx(s); xs->error = XS_SENSE; return COMPLETE; case 0x08: /* Busy */ xs->error = XS_BUSY; return COMPLETE; default: xs->error = XS_DRIVER_STUFFUP; return COMPLETE; } } xs->error = XS_NOERROR; return (COMPLETE); } static int select_target(register volatile sci_padded_regmap_t * regs, u_char myid, u_char tid, int with_atn) { register u_char bid, icmd; int ret = SCSI_RET_RETRY; if ((regs->sci_bus_csr & (SCI_BUS_BSY | SCI_BUS_SEL)) && (regs->sci_bus_csr & (SCI_BUS_BSY | SCI_BUS_SEL)) && (regs->sci_bus_csr & (SCI_BUS_BSY | SCI_BUS_SEL))) return ret; /* for our purposes.. */ myid = 1 << myid; tid = 1 << tid; regs->sci_sel_enb = 0; /* myid; we don't want any interrupts. */ regs->sci_tcmd = 0; /* Get into a harmless state. */ regs->sci_mode = 0; /* Get into a harmless state. */ regs->sci_odata = myid; regs->sci_mode = SCI_MODE_ARB; /* regs->sci_mode |= SCI_MODE_ARB; */ /* AIP might not set if BSY went true after we checked */ for (bid = 0; bid < 20; bid++) /* 20usec circa */ if (regs->sci_icmd & SCI_ICMD_AIP) break; if ((regs->sci_icmd & SCI_ICMD_AIP) == 0) { goto lost; } delay(3); /* 2.4us arb delay */ if (regs->sci_icmd & SCI_ICMD_LST) { goto lost; } regs->sci_mode &= ~SCI_MODE_PAR_CHK; bid = regs->sci_data; if ((bid & ~myid) > myid) { goto lost; } if (regs->sci_icmd & SCI_ICMD_LST) { goto lost; } /* Won arbitration, enter selection phase now */ icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF | SCI_ICMD_TEST); icmd |= (with_atn ? (SCI_ICMD_SEL | SCI_ICMD_ATN) : SCI_ICMD_SEL); icmd |= SCI_ICMD_BSY; regs->sci_icmd = icmd; if (regs->sci_icmd & SCI_ICMD_LST) { goto nosel; } /* XXX a target that violates specs might still drive the bus XXX */ /* XXX should put our id out, and after the delay check nothi XXX */ /* XXX ng else is out there. XXX */ delay(1); regs->sci_tcmd = 0; regs->sci_odata = myid | tid; regs->sci_sel_enb = 0; /* regs->sci_mode &= ~SCI_MODE_ARB; 2 deskew delays, too */ regs->sci_mode = 0; /* 2 deskew delays, too */ icmd |= SCI_ICMD_DATA; icmd &= ~(SCI_ICMD_BSY); regs->sci_icmd = icmd; /* bus settle delay, 400ns */ delay(1); /* 1us > 400ns ;-) */ /* regs->sci_mode |= SCI_MODE_PAR_CHK; */ { register int timeo = 2500; /* 250 msecs in 100 usecs * chunks */ while ((regs->sci_bus_csr & SCI_BUS_BSY) == 0) { if (--timeo > 0) { delay(100); } else { goto nodev; } } } icmd &= ~(SCI_ICMD_DATA | SCI_ICMD_SEL); regs->sci_icmd = icmd; /* regs->sci_sel_enb = myid;*//* looks like we should NOT have it */ return SCSI_RET_SUCCESS; nodev: ret = SCSI_RET_DEVICE_DOWN; regs->sci_sel_enb = myid; nosel: icmd &= ~(SCI_ICMD_DATA | SCI_ICMD_SEL | SCI_ICMD_ATN); regs->sci_icmd = icmd; lost: regs->sci_mode = 0; return ret; } static int sci_data_out(regs, phase, count, data) register sci_padded_regmap_t *regs; unsigned char *data; { register unsigned char icmd; register int cnt = 0; /* ..checks.. */ icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF | SCI_ICMD_TEST); loop: if (SCI_CUR_PHASE(regs->sci_bus_csr) != phase) return cnt; WAIT_FOR_REQ(regs); icmd |= SCI_ICMD_DATA; regs->sci_icmd = icmd; regs->sci_odata = *data++; icmd |= SCI_ICMD_ACK; regs->sci_icmd = icmd; icmd &= ~(SCI_ICMD_DATA | SCI_ICMD_ACK); WAIT_FOR_NOT_REQ(regs); regs->sci_icmd = icmd; ++cnt; if (--count > 0) goto loop; scsi_timeout_error: return cnt; } static int sci_data_in(regs, phase, count, data) register sci_padded_regmap_t *regs; unsigned char *data; { register unsigned char icmd; register int cnt = 0; /* ..checks.. */ icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF | SCI_ICMD_TEST); loop: if (SCI_CUR_PHASE(regs->sci_bus_csr) != phase) return cnt; WAIT_FOR_REQ(regs); *data++ = regs->sci_data; icmd |= SCI_ICMD_ACK; regs->sci_icmd = icmd; icmd &= ~SCI_ICMD_ACK; WAIT_FOR_NOT_REQ(regs); regs->sci_icmd = icmd; ++cnt; if (--count > 0) goto loop; scsi_timeout_error: return cnt; } static int command_transfer(register volatile sci_padded_regmap_t * regs, int maxlen, u_char * data, u_char * status, u_char * msg) { int xfer = 0, phase; /* printf("command_transfer called for 0x%x.\n", *data); */ regs->sci_icmd = 0; while (1) { WAIT_FOR_REQ(regs); phase = SCI_CUR_PHASE(regs->sci_bus_csr); switch (phase) { case SCSI_PHASE_CMD: SCI_ACK(regs, SCSI_PHASE_CMD); xfer += sci_data_out(regs, SCSI_PHASE_CMD, maxlen, data); return xfer; case SCSI_PHASE_DATA_IN: printf("Data in phase in command_transfer?\n"); return 0; case SCSI_PHASE_DATA_OUT: printf("Data out phase in command_transfer?\n"); return 0; case SCSI_PHASE_STATUS: SCI_ACK(regs, SCSI_PHASE_STATUS); printf("status in command_transfer.\n"); sci_data_in(regs, SCSI_PHASE_STATUS, 1, status); break; case SCSI_PHASE_MESSAGE_IN: SCI_ACK(regs, SCSI_PHASE_MESSAGE_IN); printf("msgin in command_transfer.\n"); sci_data_in(regs, SCSI_PHASE_MESSAGE_IN, 1, msg); break; case SCSI_PHASE_MESSAGE_OUT: SCI_ACK(regs, SCSI_PHASE_MESSAGE_OUT); sci_data_out(regs, SCSI_PHASE_MESSAGE_OUT, 1, msg); break; default: printf("Unexpected phase 0x%x in " "command_transfer().\n", phase); scsi_timeout_error: return xfer; break; } } } static int data_transfer(register volatile sci_padded_regmap_t * regs, int maxlen, u_char * data, u_char * status, u_char * msg) { int retlen = 0, xfer, phase; regs->sci_icmd = 0; *status = 0; while (1) { WAIT_FOR_REQ(regs); phase = SCI_CUR_PHASE(regs->sci_bus_csr); switch (phase) { case SCSI_PHASE_CMD: printf("Command phase in data_transfer().\n"); return retlen; case SCSI_PHASE_DATA_IN: SCI_ACK(regs, SCSI_PHASE_DATA_IN); #if PSEUDO_DMA xfer = sci_pdma_in(regs, SCSI_PHASE_DATA_IN, maxlen, data); #else xfer = sci_data_in(regs, SCSI_PHASE_DATA_IN, maxlen, data); #endif retlen += xfer; maxlen -= xfer; break; case SCSI_PHASE_DATA_OUT: SCI_ACK(regs, SCSI_PHASE_DATA_OUT); #if PSEUDO_DMA xfer = sci_pdma_out(regs, SCSI_PHASE_DATA_OUT, maxlen, data); #else xfer = sci_data_out(regs, SCSI_PHASE_DATA_OUT, maxlen, data); #endif retlen += xfer; maxlen -= xfer; break; case SCSI_PHASE_STATUS: SCI_ACK(regs, SCSI_PHASE_STATUS); sci_data_in(regs, SCSI_PHASE_STATUS, 1, status); break; case SCSI_PHASE_MESSAGE_IN: SCI_ACK(regs, SCSI_PHASE_MESSAGE_IN); sci_data_in(regs, SCSI_PHASE_MESSAGE_IN, 1, msg); if (*msg == 0) { return retlen; } else { printf("message 0x%x in " "data_transfer.\n", *msg); } break; case SCSI_PHASE_MESSAGE_OUT: SCI_ACK(regs, SCSI_PHASE_MESSAGE_OUT); sci_data_out(regs, SCSI_PHASE_MESSAGE_OUT, 1, msg); break; default: printf("Unexpected phase 0x%x in " "data_transfer().\n", phase); scsi_timeout_error: return retlen; break; } } } static int scsi_request(register volatile sci_padded_regmap_t * regs, int target, int lun, u_char * cmd, int cmdlen, char *databuf, int datalen, int *sent, int *ret) { /* Returns 0 on success, -1 on internal error, or the status byte */ int cmd_bytes_sent, r; u_char stat, msg, c; *sent = 0; if ((r = select_target(regs, 7, target, 1)) != SCSI_RET_SUCCESS) { *ret = r; SCI_CLR_INTR(regs); switch (r) { case SCSI_RET_RETRY: return 0x08; default: printf("select_target(target %d, lun %d) failed(%d).\n", target, lun, r); case SCSI_RET_DEVICE_DOWN: return -1; } } c = 0x80 | lun; if ((cmd_bytes_sent = command_transfer(regs, cmdlen, (u_char *) cmd, &stat, &c)) != cmdlen) { SCI_CLR_INTR(regs); *ret = SCSI_RET_COMMAND_FAIL; printf("Data underrun sending CCB (%d bytes of %d, sent).\n", cmd_bytes_sent, cmdlen); return -1; } *sent = data_transfer(regs, datalen, (u_char *) databuf, &stat, &msg); *ret = 0; return stat; } static int scsi_gen(int adapter, int id, int lun, struct scsi_generic * cmd, int cmdlen, void *databuf, int datalen) { register volatile sci_padded_regmap_t *regs = ncr; int i, j, sent, ret; cmd->bytes[0] = ((u_char) lun << 5); i = scsi_request(regs, id, lun, (u_char *) cmd, cmdlen, databuf, datalen, &sent, &ret); return i; } static int scsi_group0(int adapter, int id, int lun, int opcode, int addr, int len, int flags, caddr_t databuf, int datalen) { register volatile sci_padded_regmap_t *regs = ncr; unsigned char cmd[6]; int i, j, sent, ret; cmd[0] = opcode; /* Operation code */ cmd[1] = (lun << 5) | ((addr >> 16) & 0x1F); /* Lun & MSB of addr */ cmd[2] = (addr >> 8) & 0xFF; /* addr */ cmd[3] = addr & 0xFF; /* LSB of addr */ cmd[4] = len; /* Allocation length */ cmd[5] = flags; /* Link/Flag */ i = scsi_request(regs, id, lun, cmd, 6, databuf, datalen, &sent, &ret); return i; } /* pseudo-dma action */ #if PSEUDO_DMA #define TIMEOUT 1000000 #define READY(poll) \ i = TIMEOUT; \ while ((regs->sci_csr & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) \ !=(SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) \ if ( !(regs->sci_csr & SCI_CSR_PHASE_MATCH) \ || !(regs->sci_bus_csr & SCI_BUS_BSY) \ || (i-- < 0) ) { \ printf("scsi.c: timeout counter = %d, len = %d count=%d (count-len %d).\n", \ i, len,count,count-len); \ printf("pdebug = %d, 1=out, 2=in",pdebug); \ /*dump_regs();*/ \ if (poll && !(regs->sci_csr & SCI_CSR_PHASE_MATCH)) { \ regs->sci_icmd &= ~SCI_ICMD_DATA; \ len--; \ } else { \ regs->sci_mode &= ~SCI_MODE_DMA; \ } \ return count-len; \ } #define W1 *byte_data = *data++ #define W4 *long_data = *((long*)data)++ sci_pdma_out(regs, phase, count, data) register volatile sci_padded_regmap_t *regs; int phase; int count; u_char *data; { register volatile long *long_data = sci_4byte_addr; register volatile u_char *byte_data = sci_1byte_addr; register int len = count, i; pdebug = 1; if (count < 128) return sci_data_out(regs, phase, count, data); WAIT_FOR_BSY(regs); regs->sci_mode |= SCI_MODE_DMA; regs->sci_icmd |= SCI_ICMD_DATA; regs->sci_dma_send = 0; while (len >= 64) { READY(1); W1; READY(1); W1; READY(1); W1; READY(1); W1; READY(1); W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; len -= 64; } while (len) { READY(1); W1; len--; } i = TIMEOUT; while (((regs->sci_csr & (SCI_CSR_DREQ | SCI_CSR_PHASE_MATCH)) == SCI_CSR_PHASE_MATCH) && --i); if (!i) printf("scsi.c:%d: timeout waiting for SCI_CSR_DREQ.\n", __LINE__); *byte_data = 0; scsi_timeout_error: regs->sci_mode &= ~SCI_MODE_DMA; return count - len; } #undef W1 #undef W4 #define R4 *((long *)data)++ = *long_data #define R1 *data++ = *byte_data sci_pdma_in(regs, phase, count, data) register volatile sci_padded_regmap_t *regs; int phase; int count; u_char *data; { register volatile long *long_data = sci_4byte_addr; register volatile u_char *byte_data = sci_1byte_addr; register int len = count, i; pdebug = 2; if (count < 128) return sci_data_in(regs, phase, count, data); /* printf("Called sci_pdma_in(0x%x, 0x%x, %d, 0x%x.\n", regs, phase, count, data); */ WAIT_FOR_BSY(regs); regs->sci_mode |= SCI_MODE_DMA; regs->sci_icmd |= SCI_ICMD_DATA; regs->sci_irecv = 0; while (len >= 1024) { READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 128 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 256 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 384 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 512 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 640 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 768 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 896 */ READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 1024 */ len -= 1024; } while (len >= 128) { READY(0); R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 128 */ len -= 128; } while (len) { READY(0); R1; len--; } scsi_timeout_error: regs->sci_mode &= ~SCI_MODE_DMA; return count - len; } #undef R4 #undef R1 #endif