/* $NetBSD: cd18xx.c,v 1.9 2003/08/07 16:30:59 agc Exp $ */ /* * Copyright (c) 1998, 2001 Matthew R. Green * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*- * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)com.c 7.5 (Berkeley) 5/16/91 */ /* * cirrus logic CL-CD180/CD1864/CD1865 driver, based in (large) parts on * the com and z8530 drivers. thanks charles. */ #include __KERNEL_RCSID(0, "$NetBSD: cd18xx.c,v 1.9 2003/08/07 16:30:59 agc Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include "ioconf.h" /* * some helpers */ /* macros to clear/set/test flags. */ #define SET(t, f) (t) |= (f) #define CLR(t, f) (t) &= ~(f) #define ISSET(t, f) ((t) & (f)) static void cdtty_attach(struct cd18xx_softc *, int); static __inline void cd18xx_rint(struct cd18xx_softc *, int *); static __inline void cd18xx_tint(struct cd18xx_softc *, int *); static __inline void cd18xx_mint(struct cd18xx_softc *, int *); void cdtty_rxsoft(struct cd18xx_softc *, struct cdtty_port *, struct tty *); void cdtty_txsoft(struct cd18xx_softc *, struct cdtty_port *, struct tty *); void cdtty_stsoft(struct cd18xx_softc *, struct cdtty_port *, struct tty *); void cd18xx_softintr(void *); dev_type_open(cdttyopen); dev_type_close(cdttyclose); dev_type_read(cdttyread); dev_type_write(cdttywrite); dev_type_ioctl(cdttyioctl); dev_type_stop(cdttystop); dev_type_tty(cdttytty); dev_type_poll(cdttypoll); const struct cdevsw cdtty_cdevsw = { cdttyopen, cdttyclose, cdttyread, cdttywrite, cdttyioctl, cdttystop, cdttytty, cdttypoll, nommap, ttykqfilter, D_TTY }; static void cdtty_shutdown(struct cd18xx_softc *, struct cdtty_port *); static void cdttystart(struct tty *); static int cdttyparam(struct tty *, struct termios *); static void cdtty_break(struct cd18xx_softc *, struct cdtty_port *, int); static void cdtty_modem(struct cd18xx_softc *, struct cdtty_port *, int); static int cdttyhwiflow(struct tty *, int); static void cdtty_hwiflow(struct cd18xx_softc *, struct cdtty_port *); static void cdtty_loadchannelregs(struct cd18xx_softc *, struct cdtty_port *); /* default read buffer size */ u_int cdtty_rbuf_size = CDTTY_RING_SIZE; /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ u_int cdtty_rbuf_hiwat = (CDTTY_RING_SIZE * 1) / 4; u_int cdtty_rbuf_lowat = (CDTTY_RING_SIZE * 3) / 4; #define CD18XXDEBUG #ifdef CD18XXDEBUG #define CDD_INFO 0x0001 #define CDD_INTR 0x0002 int cd18xx_debug = CDD_INTR|CDD_INFO; # define DPRINTF(l, x) if (cd18xx_debug & l) printf x #else # define DPRINTF(l, x) /* nothing */ #endif /* Known supported revisions. */ struct cd18xx_revs { u_char revision; u_char onehundred_pin; char *name; } cd18xx_revs[] = { { CD180_GFRCR_REV_B, 0, "CL-CD180 rev. B" }, { CD180_GFRCR_REV_C, 0, "CL-CD180 rev. C" }, { CD1864_GFRCR_REVISION_A, 1, "CL-CD1864 rev. A" }, { CD1865_GFRCR_REVISION_A, 1, "CL-CD1865 rev. A" }, { CD1865_GFRCR_REVISION_B, 1, "CL-CD1865 rev. B" }, { CD1865_GFRCR_REVISION_C, 1, "CL-CD1865 rev. C" }, { 0, 0, 0 } }; /* wait for the CCR to go to zero */ static __inline int cd18xx_wait_ccr(struct cd18xx_softc *); static __inline int cd18xx_wait_ccr(sc) struct cd18xx_softc *sc; { int i = 100000; while (--i && bus_space_read_1(sc->sc_tag, sc->sc_handle, CD18xx_CCR) != 0) ; return (i == 0); } /* * device attach routine, high-end portion */ void cd18xx_attach(sc) struct cd18xx_softc *sc; { static int chip_id_next = 1; int onehundred_pin, revision, i, port; /* read and print the revision */ revision = cd18xx_read(sc, CD18xx_GFRCR); onehundred_pin = ISSET(cd18xx_read(sc, CD18xx_SRCR),CD18xx_SRCR_PKGTYP); for (i = 0; cd18xx_revs[i].name; i++) if (revision == cd18xx_revs[i].revision || onehundred_pin == cd18xx_revs[i].onehundred_pin) { printf(": %s", cd18xx_revs[i].name); break; } if (cd18xx_revs[i].name == NULL) { printf("%s: unknown revision, bailing.\n", sc->sc_dev.dv_xname); return; } /* prepare for reset */ cd18xx_set_car(sc, 0); cd18xx_write(sc, CD18xx_GSVR, CD18xx_GSVR_CLEAR); /* wait for CCR to go to zero */ if (cd18xx_wait_ccr(sc)) { printf("cd18xx_attach: reset change command timed out\n"); return; } /* full reset of all channels */ cd18xx_write(sc, CD18xx_CCR, CD18xx_CCR_RESET|CD18xx_CCR_RESET_HARD); /* loop until the GSVR is ready */ i = 100000; while (--i && cd18xx_read(sc, CD18xx_GSVR) == CD18xx_GSVR_READY) ; if (i == 0) { printf("\n%s: did not reset!\n", sc->sc_dev.dv_xname); return; } /* write the chip_id */ sc->sc_chip_id = chip_id_next++; #ifdef DIAGNOSTIC if (sc->sc_chip_id > 31) panic("more than 31 cd18xx's? help."); #endif cd18xx_write(sc, CD18xx_GSVR, CD18xx_GSVR_SETID(sc)); /* rx/tx/modem service match vectors, initalised by higher level */ cd18xx_write(sc, CD18xx_MSMR, sc->sc_msmr | 0x80); cd18xx_write(sc, CD18xx_TSMR, sc->sc_tsmr | 0x80); cd18xx_write(sc, CD18xx_RSMR, sc->sc_rsmr | 0x80); printf(", gsvr %x msmr %x tsmr %x rsmr %x", cd18xx_read(sc, CD18xx_GSVR), cd18xx_read(sc, CD18xx_MSMR), cd18xx_read(sc, CD18xx_TSMR), cd18xx_read(sc, CD18xx_RSMR)); /* prescale registers */ sc->sc_pprh = 0xf0; sc->sc_pprl = 0; cd18xx_write(sc, CD18xx_PPRH, sc->sc_pprh); cd18xx_write(sc, CD18xx_PPRL, sc->sc_pprl); /* establish our soft interrupt. */ sc->sc_si = softintr_establish(IPL_SOFTSERIAL, cd18xx_softintr, sc); printf(", 8 ports ready (chip id %d)\n", sc->sc_chip_id); /* * finally, we loop over all 8 channels initialising them */ for (port = 0; port < 8; port++) cdtty_attach(sc, port); } /* tty portion of the code */ /* * tty portion attach routine */ void cdtty_attach(sc, port) struct cd18xx_softc *sc; int port; { struct cdtty_port *p = &sc->sc_ports[port]; int i; /* load CAR with channel number */ cd18xx_set_car(sc, port); /* wait for CCR to go to zero */ if (cd18xx_wait_ccr(sc)) { printf("cd18xx_attach: change command timed out setting " "CAR for port %d\n", i); return; } /* set the RPTR to (arbitrary) 8 */ cd18xx_write(sc, CD18xx_RTPR, 8); /* reset the modem signal value register */ sc->sc_ports[port].p_msvr = CD18xx_MSVR_RESET; /* zero the service request enable register */ cd18xx_write(sc, CD18xx_SRER, 0); /* enable the transmitter & receiver */ SET(p->p_chanctl, CD18xx_CCR_CHANCTL | CD18xx_CCR_CHANCTL_TxEN | CD18xx_CCR_CHANCTL_RxEN); /* XXX no console or kgdb support yet! */ /* get a tty structure */ p->p_tty = ttymalloc(); p->p_tty->t_oproc = cdttystart; p->p_tty->t_param = cdttyparam; p->p_tty->t_hwiflow = cdttyhwiflow; p->p_rbuf = malloc(cdtty_rbuf_size << 1, M_DEVBUF, M_WAITOK); p->p_rbput = p->p_rbget = p->p_rbuf; p->p_rbavail = cdtty_rbuf_size; if (p->p_rbuf == NULL) { printf("%s: unable to allocate ring buffer for tty %d\n", sc->sc_dev.dv_xname, port); return; } p->p_ebuf = p->p_rbuf + (cdtty_rbuf_size << 1); tty_attach(p->p_tty); } /* * cdtty_shutdown: called when the device is last closed. */ void cdtty_shutdown(sc, p) struct cd18xx_softc *sc; struct cdtty_port *p; { struct tty *tp = p->p_tty; int s; s = splserial(); /* If we were asserting flow control, then deassert it. */ SET(p->p_rx_flags, RX_IBUF_BLOCKED); cdtty_hwiflow(sc, p); /* Clear any break condition set with TIOCSBRK. */ cdtty_break(sc, p, 0); /* * Hang up if necessary. Wait a bit, so the other side has time to * notice even if we immediately open the port again. * Avoid tsleeping above splhigh(). */ if (ISSET(tp->t_cflag, HUPCL)) { cdtty_modem(sc, p, 0); splx(s); /* XXX tsleep will only timeout */ (void) tsleep(sc, TTIPRI, ttclos, hz); s = splserial(); } /* Turn off interrupts. */ p->p_srer = 0; cd18xx_write(sc, CD18xx_SRER, p->p_srer); splx(s); } /* * cdttyopen: open syscall for cdtty terminals.. */ int cdttyopen(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { struct tty *tp; struct cd18xx_softc *sc; struct cdtty_port *port; int channel, instance, s, error; channel = CD18XX_CHANNEL(dev); instance = CD18XX_INSTANCE(dev); /* ensure instance is valid */ if (instance >= clcd_cd.cd_ndevs) return (ENXIO); /* get softc and port */ sc = clcd_cd.cd_devs[instance]; if (sc == NULL) return (ENXIO); port = &sc->sc_ports[channel]; if (port == NULL || port->p_rbuf == NULL) return (ENXIO); /* kgdb support? maybe later... */ tp = port->p_tty; /* enforce exclude */ if (tp == NULL || (ISSET(tp->t_state, TS_ISOPEN) && ISSET(tp->t_state, TS_XCLUDE) && (p->p_ucred->cr_uid != 0))) return (EBUSY); s = spltty(); /* * Do the following iff this is a first open. */ if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { struct termios t; /* set up things in tp as necessary */ tp->t_dev = dev; /* * Initialize the termios status to the defaults. Add in the * sticky bits from TIOCSFLAGS. */ t.c_ispeed = 0; t.c_ospeed = TTYDEF_SPEED; t.c_cflag = TTYDEF_CFLAG; if (ISSET(port->p_swflags, TIOCFLAG_CLOCAL)) SET(t.c_cflag, CLOCAL); if (ISSET(port->p_swflags, TIOCFLAG_CRTSCTS)) SET(t.c_cflag, CRTSCTS); if (ISSET(port->p_swflags, TIOCFLAG_CDTRCTS)) SET(t.c_cflag, CDTRCTS); if (ISSET(port->p_swflags, TIOCFLAG_MDMBUF)) SET(t.c_cflag, MDMBUF); /* Make sure param will see changes. */ tp->t_ospeed = 0; /* XXX set above ignored? */ (void)cdttyparam(tp, &t); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_lflag = TTYDEF_LFLAG; ttychars(tp); ttsetwater(tp); (void)splserial(); /* turn on rx and modem interrupts */ cd18xx_set_car(sc, CD18XX_CHANNEL(dev)); SET(port->p_srer, CD18xx_SRER_Rx | CD18xx_SRER_RxSC | CD18xx_SRER_CD); cd18xx_write(sc, CD18xx_SRER, port->p_srer); /* always turn on DTR when open */ cdtty_modem(sc, port, 1); /* initialise ring buffer */ port->p_rbget = port->p_rbput = port->p_rbuf; port->p_rbavail = cdtty_rbuf_size; CLR(port->p_rx_flags, RX_ANY_BLOCK); cdtty_hwiflow(sc, port); } /* drop spl back before going into the line open */ splx(s); error = ttyopen(tp, CD18XX_DIALOUT(dev), ISSET(flag, O_NONBLOCK)); if (error == 0) error = (*tp->t_linesw->l_open)(dev, tp); return (error); } /* * cdttyclose: close syscall for cdtty terminals.. */ int cdttyclose(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { struct cd18xx_softc *sc; struct cdtty_port *port; struct tty *tp; int channel, instance; channel = CD18XX_CHANNEL(dev); instance = CD18XX_INSTANCE(dev); /* ensure instance is valid */ if (instance >= clcd_cd.cd_ndevs) return (ENXIO); /* get softc and port */ sc = clcd_cd.cd_devs[instance]; if (sc == NULL) return (ENXIO); port = &sc->sc_ports[channel]; tp = port->p_tty; (*tp->t_linesw->l_close)(tp, flag); ttyclose(tp); if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { /* * Although we got a last close, the device may still be in * use; e.g. if this was the dialout node, and there are still * processes waiting for carrier on the non-dialout node. */ cdtty_shutdown(sc, port); } return (0); } /* * cdttyread: read syscall for cdtty terminals.. */ int cdttyread(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(dev)]; struct cdtty_port *port = &sc->sc_ports[CD18XX_CHANNEL(dev)]; struct tty *tp = port->p_tty; return ((*tp->t_linesw->l_read)(tp, uio, flag)); } /* * cdttywrite: write syscall for cdtty terminals.. */ int cdttywrite(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(dev)]; struct cdtty_port *port = &sc->sc_ports[CD18XX_CHANNEL(dev)]; struct tty *tp = port->p_tty; return ((*tp->t_linesw->l_write)(tp, uio, flag)); } int cdttypoll(dev, events, p) dev_t dev; int events; struct proc *p; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(dev)]; struct cdtty_port *port = &sc->sc_ports[CD18XX_CHANNEL(dev)]; struct tty *tp = port->p_tty; return ((*tp->t_linesw->l_poll)(tp, events, p)); } /* * cdttytty: return a pointer to our (cdtty) tp. */ struct tty * cdttytty(dev) dev_t dev; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(dev)]; struct cdtty_port *port = &sc->sc_ports[CD18XX_CHANNEL(dev)]; return (port->p_tty); } /* * cdttyioctl: ioctl syscall for cdtty terminals.. */ int cdttyioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(dev)]; struct cdtty_port *port = &sc->sc_ports[CD18XX_CHANNEL(dev)]; struct tty *tp = port->p_tty; int error, s; error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, p); if (error != EPASSTHROUGH) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error != EPASSTHROUGH) return (error); s = splserial(); switch (cmd) { case TIOCSBRK: cdtty_break(sc, port, 1); break; case TIOCCBRK: cdtty_break(sc, port, 0); break; case TIOCSDTR: cdtty_modem(sc, port, 1); break; case TIOCCDTR: cdtty_modem(sc, port, 0); break; case TIOCGFLAGS: *(int *)data = port->p_swflags; break; case TIOCSFLAGS: error = suser(p->p_ucred, &p->p_acflag); if (error) return (error); port->p_swflags = *(int *)data; break; case TIOCMSET: case TIOCMBIS: case TIOCMBIC: case TIOCMGET: default: return (EPASSTHROUGH); } splx(s); return (0); } /* * Start or restart transmission. */ static void cdttystart(tp) struct tty *tp; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(tp->t_dev)]; struct cdtty_port *p = &sc->sc_ports[CD18XX_CHANNEL(tp->t_dev)]; int s; s = spltty(); if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) goto out; if (p->p_tx_stopped) goto out; if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup((caddr_t)&tp->t_outq); } selwakeup(&tp->t_wsel); if (tp->t_outq.c_cc == 0) goto out; } /* Grab the first contiguous region of buffer space. */ { u_char *tba; int tbc; tba = tp->t_outq.c_cf; tbc = ndqb(&tp->t_outq, 0); (void)splserial(); p->p_tba = tba; p->p_tbc = tbc; } SET(tp->t_state, TS_BUSY); p->p_tx_busy = 1; /* turn on tx interrupts */ if ((p->p_srer & CD18xx_SRER_Tx) == 0) { cd18xx_set_car(sc, CD18XX_CHANNEL(tp->t_dev)); SET(p->p_srer, CD18xx_SRER_Tx); cd18xx_write(sc, CD18xx_SRER, p->p_srer); } /* * Now bail; we can't actually transmit bytes until we're in a * transmit interrupt service routine. */ out: splx(s); return; } /* * cdttystop: handing ^S or other stop signals, for a cdtty */ void cdttystop(tp, flag) struct tty *tp; int flag; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(tp->t_dev)]; struct cdtty_port *p = &sc->sc_ports[CD18XX_CHANNEL(tp->t_dev)]; int s; s = splserial(); if (ISSET(tp->t_state, TS_BUSY)) { /* Stop transmitting at the next chunk. */ p->p_tbc = 0; p->p_heldtbc = 0; if (!ISSET(tp->t_state, TS_TTSTOP)) SET(tp->t_state, TS_FLUSH); } splx(s); } /* * load a channel's registers. */ void cdtty_loadchannelregs(sc, p) struct cd18xx_softc *sc; struct cdtty_port *p; { cd18xx_set_car(sc, CD18XX_CHANNEL(p->p_tty->t_dev)); cd18xx_write(sc, CD18xx_SRER, p->p_srer); cd18xx_write(sc, CD18xx_MSVR, p->p_msvr_active = p->p_msvr); cd18xx_write(sc, CD18xx_COR1, p->p_cor1); cd18xx_write(sc, CD18xx_COR2, p->p_cor2); cd18xx_write(sc, CD18xx_COR3, p->p_cor3); /* * COR2 and COR3 change commands are not required here for * the CL-CD1865 but we do them anyway for simplicity. */ cd18xx_write(sc, CD18xx_CCR, CD18xx_CCR_CORCHG | CD18xx_CCR_CORCHG_COR1 | CD18xx_CCR_CORCHG_COR2 | CD18xx_CCR_CORCHG_COR3); cd18xx_write(sc, CD18xx_RBPRH, p->p_rbprh); cd18xx_write(sc, CD18xx_RBPRL, p->p_rbprl); cd18xx_write(sc, CD18xx_TBPRH, p->p_tbprh); cd18xx_write(sc, CD18xx_TBPRL, p->p_tbprl); if (cd18xx_wait_ccr(sc)) { DPRINTF(CDD_INFO, ("%s: cdtty_loadchannelregs ccr wait timed out\n", sc->sc_dev.dv_xname)); } cd18xx_write(sc, CD18xx_CCR, p->p_chanctl); } /* * Set tty parameters from termios. * XXX - Should just copy the whole termios after * making sure all the changes could be done. */ static int cdttyparam(tp, t) struct tty *tp; struct termios *t; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(tp->t_dev)]; struct cdtty_port *p = &sc->sc_ports[CD18XX_CHANNEL(tp->t_dev)]; int s; /* Check requested parameters. */ if (t->c_ospeed < 0) return (EINVAL); if (t->c_ispeed && t->c_ispeed != t->c_ospeed) return (EINVAL); /* * For the console, always force CLOCAL and !HUPCL, so that the port * is always active. */ if (ISSET(p->p_swflags, TIOCFLAG_SOFTCAR)) { SET(t->c_cflag, CLOCAL); CLR(t->c_cflag, HUPCL); } /* * If there were no changes, don't do anything. This avoids dropping * input and improves performance when all we did was frob things like * VMIN and VTIME. */ if (tp->t_ospeed == t->c_ospeed && tp->t_cflag == t->c_cflag) return (0); /* * Block interrupts so that state will not * be altered until we are done setting it up. */ s = splserial(); /* * Copy across the size, parity and stop bit info. */ switch (t->c_cflag & CSIZE) { case CS5: p->p_cor1 = CD18xx_COR1_CS5; break; case CS6: p->p_cor1 = CD18xx_COR1_CS6; break; case CS7: p->p_cor1 = CD18xx_COR1_CS7; break; default: p->p_cor1 = CD18xx_COR1_CS8; break; } if (ISSET(t->c_cflag, PARENB)) { SET(p->p_cor1, CD18xx_COR1_PARITY_NORMAL); if (ISSET(t->c_cflag, PARODD)) SET(p->p_cor1, CD18xx_COR1_PARITY_ODD); } if (!ISSET(t->c_iflag, INPCK)) SET(p->p_cor1, CD18xx_COR1_IGNORE); if (ISSET(t->c_cflag, CSTOPB)) SET(p->p_cor1, CD18xx_COR1_STOPBIT_2); /* * If we're not in a mode that assumes a connection is present, then * ignore carrier changes. */ if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) p->p_msvr_dcd = 0; else p->p_msvr_dcd = CD18xx_MSVR_CD; /* * Set the flow control pins depending on the current flow control * mode. */ if (ISSET(t->c_cflag, CRTSCTS)) { p->p_mcor1_dtr = CD18xx_MCOR1_DTR; p->p_msvr_rts = CD18xx_MSVR_RTS; p->p_msvr_cts = CD18xx_MSVR_CTS; p->p_cor2 = CD18xx_COR2_RTSAOE|CD18xx_COR2_CTSAE; } else if (ISSET(t->c_cflag, MDMBUF)) { /* * For DTR/DCD flow control, make sure we don't toggle DTR for * carrier detection. */ p->p_mcor1_dtr = 0; p->p_msvr_rts = CD18xx_MSVR_DTR; p->p_msvr_cts = CD18xx_MSVR_CD; p->p_cor2 = 0; } else { /* * If no flow control, then always set RTS. This will make * the other side happy if it mistakenly thinks we're doing * RTS/CTS flow control. */ p->p_mcor1_dtr = CD18xx_MSVR_DTR; p->p_msvr_rts = 0; p->p_msvr_cts = 0; p->p_cor2 = 0; } p->p_msvr_mask = p->p_msvr_cts | p->p_msvr_dcd; /* * Set the FIFO threshold based on the receive speed. * * * If it's a low speed, it's probably a mouse or some other * interactive device, so set the threshold low. * * If it's a high speed, trim the trigger level down to prevent * overflows. * * Otherwise set it a bit higher. */ p->p_cor3 = (t->c_ospeed <= 1200 ? 1 : t->c_ospeed <= 38400 ? 8 : 4); #define PORT_RATE(o, s) \ (((((o) + (s)/2) / (s)) + CD18xx_xBRPR_TPC/2) / CD18xx_xBRPR_TPC) /* Compute BPS for the requested speeds */ if (t->c_ospeed) { u_int32_t tbpr = PORT_RATE(sc->sc_osc, t->c_ospeed); if (tbpr == 0 || tbpr > 0xffff) return (EINVAL); p->p_tbprh = tbpr >> 8; p->p_tbprl = tbpr & 0xff; } if (t->c_ispeed) { u_int32_t rbpr = PORT_RATE(sc->sc_osc, t->c_ispeed); if (rbpr == 0 || rbpr > 0xffff) return (EINVAL); p->p_rbprh = rbpr >> 8; p->p_rbprl = rbpr & 0xff; } /* And copy to tty. */ tp->t_ispeed = 0; tp->t_ospeed = t->c_ospeed; tp->t_cflag = t->c_cflag; if (!p->p_heldchange) { if (p->p_tx_busy) { p->p_heldtbc = p->p_tbc; p->p_tbc = 0; p->p_heldchange = 1; } else cdtty_loadchannelregs(sc, p); } if (!ISSET(t->c_cflag, CHWFLOW)) { /* Disable the high water mark. */ p->p_r_hiwat = 0; p->p_r_lowat = 0; if (ISSET(p->p_rx_flags, RX_TTY_OVERFLOWED)) { CLR(p->p_rx_flags, RX_TTY_OVERFLOWED); softintr_schedule(sc->sc_si); } if (ISSET(p->p_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { CLR(p->p_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); cdtty_hwiflow(sc, p); } } else { p->p_r_hiwat = cdtty_rbuf_hiwat; p->p_r_lowat = cdtty_rbuf_lowat; } splx(s); /* * Update the tty layer's idea of the carrier bit, in case we changed * CLOCAL or MDMBUF. We don't hang up here; we only do that by * explicit request. */ (void) (*tp->t_linesw->l_modem)(tp, ISSET(p->p_msvr, CD18xx_MSVR_CD)); if (!ISSET(t->c_cflag, CHWFLOW)) { if (p->p_tx_stopped) { p->p_tx_stopped = 0; cdttystart(tp); } } return (0); } static void cdtty_break(sc, p, onoff) struct cd18xx_softc *sc; struct cdtty_port *p; int onoff; { /* tell tx intr handler we need a break */ p->p_needbreak = !!onoff; /* turn on tx interrupts if break has changed */ if (p->p_needbreak != p->p_break) SET(p->p_srer, CD18xx_SRER_Tx); if (!p->p_heldchange) { if (p->p_tx_busy) { p->p_heldtbc = p->p_tbc; p->p_tbc = 0; p->p_heldchange = 1; } else cdtty_loadchannelregs(sc, p); } } /* * Raise or lower modem control (DTR/RTS) signals. If a character is * in transmission, the change is deferred. */ static void cdtty_modem(sc, p, onoff) struct cd18xx_softc *sc; struct cdtty_port *p; int onoff; { if (p->p_mcor1_dtr == 0) return; if (onoff) CLR(p->p_mcor1, p->p_mcor1_dtr); else SET(p->p_mcor1, p->p_mcor1_dtr); if (!p->p_heldchange) { if (p->p_tx_busy) { p->p_heldtbc = p->p_tbc; p->p_tbc = 0; p->p_heldchange = 1; } else cdtty_loadchannelregs(sc, p); } } /* * Try to block or unblock input using hardware flow-control. * This is called by kern/tty.c if MDMBUF|CRTSCTS is set, and * if this function returns non-zero, the TS_TBLOCK flag will * be set or cleared according to the "block" arg passed. */ int cdttyhwiflow(tp, block) struct tty *tp; int block; { struct cd18xx_softc *sc = clcd_cd.cd_devs[CD18XX_INSTANCE(tp->t_dev)]; struct cdtty_port *p = &sc->sc_ports[CD18XX_CHANNEL(tp->t_dev)]; int s; if (p->p_msvr_rts == 0) return (0); s = splserial(); if (block) { if (!ISSET(p->p_rx_flags, RX_TTY_BLOCKED)) { SET(p->p_rx_flags, RX_TTY_BLOCKED); cdtty_hwiflow(sc, p); } } else { if (ISSET(p->p_rx_flags, RX_TTY_OVERFLOWED)) { CLR(p->p_rx_flags, RX_TTY_OVERFLOWED); softintr_schedule(sc->sc_si); } if (ISSET(p->p_rx_flags, RX_TTY_BLOCKED)) { CLR(p->p_rx_flags, RX_TTY_BLOCKED); cdtty_hwiflow(sc, p); } } splx(s); return (1); } /* * Internal version of cdttyhwiflow, called at cdtty's priority. */ static void cdtty_hwiflow(sc, p) struct cd18xx_softc *sc; struct cdtty_port *p; { if (p->p_msvr_rts == 0) return; if (ISSET(p->p_rx_flags, RX_ANY_BLOCK)) { CLR(p->p_msvr, p->p_msvr_rts); CLR(p->p_msvr_active, p->p_msvr_rts); } else { SET(p->p_msvr, p->p_msvr_rts); SET(p->p_msvr_active, p->p_msvr_rts); } cd18xx_set_car(sc, CD18XX_CHANNEL(p->p_tty->t_dev)); cd18xx_write(sc, CD18xx_MSVR, p->p_msvr_active); } /* * indiviual interrupt routines. */ /* * this is the number of interrupts allowed, total. set it to 0 * to allow unlimited interrpts */ #define INTR_MAX_ALLOWED 0 #if INTR_MAX_ALLOWED == 0 #define GOTINTR(sc, p) /* nothing */ #else int intrcount; #define GOTINTR(sc, p) \ do { \ if (intrcount++ == INTR_MAX_ALLOWED) { \ CLR(p->p_srer, CD18xx_SRER_Tx); \ cd18xx_write(sc, CD18xx_SRER, p->p_srer); \ } \ DPRINTF(CDD_INTR, (", intrcount %d srer %x", intrcount, p->p_srer)); \ } while (0) #endif /* receiver interrupt */ static __inline void cd18xx_rint(sc, ns) struct cd18xx_softc *sc; int *ns; { struct cdtty_port *p; u_int channel, count; u_char *put, *end; u_int cc; /* work out the channel and softc */ channel = cd18xx_get_gscr1_channel(sc); p = &sc->sc_ports[channel]; DPRINTF(CDD_INTR, ("%s: rint: channel %d", sc->sc_dev.dv_xname, channel)); GOTINTR(sc, p); end = p->p_ebuf; put = p->p_rbput; cc = p->p_rbavail; /* read as many bytes as necessary */ count = cd18xx_read(sc, CD18xx_RDCR); DPRINTF(CDD_INTR, (", %d bytes available: ", count)); while (cc > 0 && count > 0) { u_char rcsr = cd18xx_read(sc, CD18xx_RCSR); put[0] = cd18xx_read(sc, CD18xx_RDR); put[1] = rcsr; if (rcsr) *ns = 1; put += 2; if (put >= end) put = p->p_rbuf; DPRINTF(CDD_INTR, (".")); cc--; count--; } DPRINTF(CDD_INTR, (" finished reading")); /* * Current string of incoming characters ended because * no more data was available or we ran out of space. * If we're out of space, turn off receive interrupts. */ p->p_rbput = put; p->p_rbavail = cc; if (!ISSET(p->p_rx_flags, RX_TTY_OVERFLOWED)) { p->p_rx_ready = 1; } /* * If we're out of space, disable receive interrupts * until the queue has drained a bit. */ if (!cc) { SET(p->p_rx_flags, RX_IBUF_OVERFLOWED); CLR(p->p_srer, CD18xx_SRER_Rx | CD18xx_SRER_RxSC | CD18xx_SRER_CD); cd18xx_write(sc, CD18xx_SRER, p->p_srer); } /* finish the interrupt transaction with the IC */ cd18xx_write(sc, CD18xx_EOSRR, 0); DPRINTF(CDD_INTR, (", done\n")); } /* * transmitter interrupt * * note this relys on the fact that we allow the transmitter FIFO to * drain completely */ static __inline void cd18xx_tint(sc, ns) struct cd18xx_softc *sc; int *ns; { struct cdtty_port *p; u_int channel; /* work out the channel and softc */ channel = cd18xx_get_gscr1_channel(sc); p = &sc->sc_ports[channel]; DPRINTF(CDD_INTR, ("%s: tint: channel %d", sc->sc_dev.dv_xname, channel)); GOTINTR(sc, p); /* if the current break condition is wrong, fix it */ if (p->p_break != p->p_needbreak) { u_char buf[2]; DPRINTF(CDD_INTR, (", changing break to %d", p->p_needbreak)); /* turn on ETC processing */ cd18xx_write(sc, CD18xx_COR2, p->p_cor2 | CD18xx_COR2_ETC); buf[0] = CD18xx_TDR_ETC_BYTE; buf[1] = p->p_needbreak ? CD18xx_TDR_BREAK_BYTE : CD18xx_TDR_NOBREAK_BYTE; cd18xx_write_multi(sc, CD18xx_TDR, buf, 2); p->p_break = p->p_needbreak; /* turn off ETC processing */ cd18xx_write(sc, CD18xx_COR2, p->p_cor2); } /* * If we've delayed a parameter change, do it now, and restart * output. */ if (p->p_heldchange) { cdtty_loadchannelregs(sc, p); p->p_heldchange = 0; p->p_tbc = p->p_heldtbc; p->p_heldtbc = 0; } /* Output the next chunk of the contiguous buffer, if any. */ if (p->p_tbc > 0) { int n; n = p->p_tbc; if (n > 8) /* write up to 8 entries */ n = 8; DPRINTF(CDD_INTR, (", writing %d bytes to TDR", n)); cd18xx_write_multi(sc, CD18xx_TDR, p->p_tba, n); p->p_tbc -= n; p->p_tba += n; } /* Disable transmit completion interrupts if we ran out of bytes. */ if (p->p_tbc == 0) { /* Note that Tx interrupts should already be enabled */ if (ISSET(p->p_srer, CD18xx_SRER_Tx)) { DPRINTF(CDD_INTR, (", disabling tx interrupts")); CLR(p->p_srer, CD18xx_SRER_Tx); cd18xx_write(sc, CD18xx_SRER, p->p_srer); } if (p->p_tx_busy) { p->p_tx_busy = 0; p->p_tx_done = 1; } } *ns = 1; /* finish the interrupt transaction with the IC */ cd18xx_write(sc, CD18xx_EOSRR, 0); DPRINTF(CDD_INTR, (", done\n")); } /* modem signal change interrupt */ static __inline void cd18xx_mint(sc, ns) struct cd18xx_softc *sc; int *ns; { struct cdtty_port *p; u_int channel; u_char msvr, delta; /* work out the channel and softc */ channel = cd18xx_get_gscr1_channel(sc); p = &sc->sc_ports[channel]; DPRINTF(CDD_INTR, ("%s: mint: channel %d", sc->sc_dev.dv_xname, channel)); GOTINTR(sc, p); /* * We ignore the MCR register, and handle detecting deltas * via software, like many other serial drivers. */ msvr = cd18xx_read(sc, CD18xx_MSVR); delta = msvr ^ p->p_msvr; DPRINTF(CDD_INTR, (", msvr %d", msvr)); /* * Process normal status changes */ if (ISSET(delta, p->p_msvr_mask)) { SET(p->p_msvr_delta, delta); DPRINTF(CDD_INTR, (", status changed delta %d", delta)); /* * Stop output immediately if we lose the output * flow control signal or carrier detect. */ if (ISSET(~msvr, p->p_msvr_mask)) { p->p_tbc = 0; p->p_heldtbc = 0; /* Stop modem interrupt processing */ } p->p_st_check = 1; *ns = 1; } /* reset the modem signal register */ cd18xx_write(sc, CD18xx_MCR, 0); /* finish the interrupt transaction with the IC */ cd18xx_write(sc, CD18xx_EOSRR, 0); DPRINTF(CDD_INTR, (", done\n")); } /* * hardware interrupt routine. call the relevant interrupt routines until * no interrupts are pending. * * note: we do receive interrupts before all others (as we'd rather lose * a chance to transmit, than lose a character). and we do transmit * interrupts before modem interrupts. * * we have to traverse all of the cd18xx's attached, unfortunately. */ int cd18xx_hardintr(v) void *v; { int i, rv = 0; u_char ack; DPRINTF(CDD_INTR, ("cd18xx_hardintr (ndevs %d):\n", clcd_cd.cd_ndevs)); for (i = 0; i < clcd_cd.cd_ndevs; i++) { struct cd18xx_softc *sc = clcd_cd.cd_devs[i]; int status, ns = 0; int count = 1; /* process only 1 interrupts at a time for now */ if (sc == NULL) continue; DPRINTF(CDD_INTR, ("%s:", sc->sc_dev.dv_xname)); while (count-- && (status = (cd18xx_read(sc, CD18xx_SRSR) & CD18xx_SRSR_PENDING))) { rv = 1; DPRINTF(CDD_INTR, (" status %x:", status)); if (ISSET(status, CD18xx_SRSR_RxPEND)) { ack = (*sc->sc_ackfunc)(sc->sc_ackfunc_arg, CD18xx_INTRACK_RxINT); DPRINTF(CDD_INTR, (" rx: ack1 %x\n", ack)); cd18xx_rint(sc, &ns); } if (ISSET(status, CD18xx_SRSR_TxPEND)) { ack = (*sc->sc_ackfunc)(sc->sc_ackfunc_arg, CD18xx_INTRACK_TxINT); DPRINTF(CDD_INTR, (" tx: ack1 %x\n", ack)); cd18xx_tint(sc, &ns); } if (ISSET(status, CD18xx_SRSR_MxPEND)) { ack = (*sc->sc_ackfunc)(sc->sc_ackfunc_arg, CD18xx_INTRACK_MxINT); DPRINTF(CDD_INTR, (" mx: ack1 %x\n", ack)); cd18xx_mint(sc, &ns); } } if (ns) softintr_schedule(sc->sc_si); } return (rv); } /* * software interrupt */ void cdtty_rxsoft(sc, p, tp) struct cd18xx_softc *sc; struct cdtty_port *p; struct tty *tp; { u_char *get, *end; u_int cc, scc; u_char rcsr; int code; int s; end = p->p_ebuf; get = p->p_rbget; scc = cc = cdtty_rbuf_size - p->p_rbavail; if (cc == cdtty_rbuf_size) { p->p_floods++; #if 0 if (p->p_errors++ == 0) callout_reset(&p->p_diag_callout, 60 * hz, cdttydiag, p); #endif } while (cc) { code = get[0]; rcsr = get[1]; if (ISSET(rcsr, CD18xx_RCSR_OVERRUNERR | CD18xx_RCSR_BREAK | CD18xx_RCSR_FRAMERR | CD18xx_RCSR_PARITYERR)) { if (ISSET(rcsr, CD18xx_RCSR_OVERRUNERR)) { p->p_overflows++; #if 0 if (p->p_errors++ == 0) callout_reset(&p->p_diag_callout, 60 * hz, cdttydiag, p); #endif } if (ISSET(rcsr, CD18xx_RCSR_BREAK|CD18xx_RCSR_FRAMERR)) SET(code, TTY_FE); if (ISSET(rcsr, CD18xx_RCSR_PARITYERR)) SET(code, TTY_PE); } if ((*tp->t_linesw->l_rint)(code, tp) == -1) { /* * The line discipline's buffer is out of space. */ if (!ISSET(p->p_rx_flags, RX_TTY_BLOCKED)) { /* * We're either not using flow control, or the * line discipline didn't tell us to block for * some reason. Either way, we have no way to * know when there's more space available, so * just drop the rest of the data. */ get += cc << 1; if (get >= end) get -= cdtty_rbuf_size << 1; cc = 0; } else { /* * Don't schedule any more receive processing * until the line discipline tells us there's * space available (through cdttyhwiflow()). * Leave the rest of the data in the input * buffer. */ SET(p->p_rx_flags, RX_TTY_OVERFLOWED); } break; } get += 2; if (get >= end) get = p->p_rbuf; cc--; } if (cc != scc) { p->p_rbget = get; s = splserial(); cc = p->p_rbavail += scc - cc; /* Buffers should be ok again, release possible block. */ if (cc >= p->p_r_lowat) { if (ISSET(p->p_rx_flags, RX_IBUF_OVERFLOWED)) { CLR(p->p_rx_flags, RX_IBUF_OVERFLOWED); cd18xx_set_car(sc, CD18XX_CHANNEL(tp->t_dev)); SET(p->p_srer, CD18xx_SRER_Rx | CD18xx_SRER_RxSC | CD18xx_SRER_CD); cd18xx_write(sc, CD18xx_SRER, p->p_srer); } if (ISSET(p->p_rx_flags, RX_IBUF_BLOCKED)) { CLR(p->p_rx_flags, RX_IBUF_BLOCKED); cdtty_hwiflow(sc, p); } } splx(s); } } void cdtty_txsoft(sc, p, tp) struct cd18xx_softc *sc; struct cdtty_port *p; struct tty *tp; { CLR(tp->t_state, TS_BUSY); if (ISSET(tp->t_state, TS_FLUSH)) CLR(tp->t_state, TS_FLUSH); else ndflush(&tp->t_outq, (int)(p->p_tba - tp->t_outq.c_cf)); (*tp->t_linesw->l_start)(tp); } void cdtty_stsoft(sc, p, tp) struct cd18xx_softc *sc; struct cdtty_port *p; struct tty *tp; { u_char msvr, delta; int s; s = splserial(); msvr = p->p_msvr; delta = p->p_msvr_delta; p->p_msvr_delta = 0; splx(s); if (ISSET(delta, p->p_msvr_dcd)) { /* * Inform the tty layer that carrier detect changed. */ (void) (*tp->t_linesw->l_modem)(tp, ISSET(msvr, CD18xx_MSVR_CD)); } if (ISSET(delta, p->p_msvr_cts)) { /* Block or unblock output according to flow control. */ if (ISSET(msvr, p->p_msvr_cts)) { p->p_tx_stopped = 0; (*tp->t_linesw->l_start)(tp); } else { p->p_tx_stopped = 1; } } } void cd18xx_softintr(v) void *v; { struct cd18xx_softc *sc = v; struct cdtty_port *p; struct tty *tp; int i; for (i = 0; i < 8; i++) { p = &sc->sc_ports[i]; tp = p->p_tty; if (tp == NULL) continue; if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) continue; if (p->p_rx_ready) { p->p_rx_ready = 0; cdtty_rxsoft(sc, p, tp); } if (p->p_st_check) { p->p_st_check = 0; cdtty_stsoft(sc, p, tp); } if (p->p_tx_done) { p->p_tx_done = 0; cdtty_txsoft(sc, p, tp); } } }