/* $NetBSD: outbound.c,v 1.5 2003/08/07 11:16:32 agc Exp $ */ /*- * Copyright (c) 1988 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #ifndef lint #if 0 static char sccsid[] = "@(#)outbound.c 4.3 (Berkeley) 4/26/91"; #else __RCSID("$NetBSD: outbound.c,v 1.5 2003/08/07 11:16:32 agc Exp $"); #endif #endif /* not lint */ #include #include "../general/general.h" #include "hostctlr.h" #include "oia.h" #include "screen.h" #include "options.h" #include "../api/ebc_disp.h" #include "../ascii/state.h" #include "../sys_curses/telextrn.h" #include "../general/globals.h" #include "externs.h" #include "declare.h" #define SetHighestLowest(position) { \ if (position < Lowest) { \ Lowest = position; \ } \ if (position > Highest) { \ Highest = position; \ } \ } static int LastWasTerminated = 1; /* was "control" = 1 last time? */ /* some globals */ #if !defined(PURE3274) int OutputClock; /* what time it is */ int TransparentClock; /* time we were last in transparent */ #endif /* !defined(PURE3274) */ char CIABuffer[64] = { 0x40, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x60, 0x61, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f }; static struct orders_def orders_def[] = ORDERS_DEF; /* * init_ctlr() * * Initialize all data from the 'data' portion to their startup values. */ void init_ctlr() { LastWasTerminated = 1; init_inbound(); init_oia(); } int FieldInc(position) int position; /* Position in previous field */ { ScreenImage *ptr; ptr = (ScreenImage *)memNSchr((char *)Host+position+1, ATTR_MASK, HighestScreen()-position, ATTR_MASK, sizeof Host[0]); if (ptr == 0) { ptr = (ScreenImage *)memNSchr((char *)Host+LowestScreen(), ATTR_MASK, position-LowestScreen(), ATTR_MASK, sizeof Host[0]); if (ptr == 0) { return LowestScreen(); } } return ptr-Host; } int FieldDec(position) int position; { ScreenImage *ptr; ptr = (ScreenImage *)memNSchr((char *)(Host+position)-1, ATTR_MASK, position-LowestScreen(), ATTR_MASK, -sizeof Host[0]); if (ptr == 0) { ptr = (ScreenImage *)memNSchr((char *)Host+HighestScreen(), ATTR_MASK, HighestScreen()-position, ATTR_MASK, -sizeof Host[0]); if (ptr == 0) { return LowestScreen(); } } return ptr-Host; } /* Clear3270 - called to clear the screen */ void Clear3270() { ClearArray(Host); DeleteAllFields(); /* get rid of all fields */ BufferAddress = SetBufferAddress(0,0); CursorAddress = SetBufferAddress(0,0); Lowest = LowestScreen(); Highest = HighestScreen(); } /* AddHost - called to add a character to the buffer. * We use a macro in this module, since we call it so * often from loops. * * NOTE: It is a macro, so don't go around using AddHost(p, *c++), or * anything similar. (I don't define any temporary variables, again * just for the speed.) */ void AddHost(position, character) int position; char character; { # define AddHostA(p,c) \ { \ if (IsStartField(p)) { \ DeleteField(p); \ Highest = HighestScreen(); \ Lowest = LowestScreen(); \ SetHighestLowest(p); \ } \ SetHost(p, c); \ } # define AddHost(p,c) \ { \ if (c != GetHost(p)) { \ SetHighestLowest(p); \ } \ AddHostA(p,c); \ } /* end of macro of AddHost */ AddHost(position, character); } /* returns the number of characters consumed */ int DataFromNetwork(Buffer, count, control) char *Buffer; /* what the data is */ int count; /* and how much there is */ int control; /* this buffer ended block? */ { int origCount; unsigned char *buffer = (unsigned char *)Buffer; int c; int i; static int Command; static int Wcc; origCount = count; /* * If this is the start of a new data stream, then look * for an op-code and (possibly) a WCC. */ if (LastWasTerminated) { if (count < 2) { if (count == 0) { ExitString("Short count received from host!\n", 1); return(count); } Command = buffer[0]; switch (Command) { /* This had better be a read command */ case CMD_READ_MODIFIED: case CMD_SNA_READ_MODIFIED: case CMD_SNA_READ_MODIFIED_ALL: SetOiaOnlineA(&OperatorInformationArea); SetOiaModified(); DoReadModified(Command); break; case CMD_READ_BUFFER: case CMD_SNA_READ_BUFFER: SetOiaOnlineA(&OperatorInformationArea); SetOiaModified(); DoReadBuffer(); break; default: { char s_buffer[100]; sprintf(s_buffer, "Unexpected read command code 0x%x received.\n", Command); ExitString(s_buffer, 1); break; } } return(1); /* We consumed everything */ } Command = buffer[0]; Wcc = buffer[1]; if (Wcc & WCC_RESET_MDT) { i = c = WhereAttrByte(LowestScreen()); do { if (HasMdt(i)) { TurnOffMdt(i); } i = FieldInc(i); } while (i != c); } switch (Command) { case CMD_ERASE_WRITE: case CMD_ERASE_WRITE_ALTERNATE: case CMD_SNA_ERASE_WRITE: case CMD_SNA_ERASE_WRITE_ALTERNATE: { int newlines, newcolumns; SetOiaOnlineA(&OperatorInformationArea); ResetOiaTWait(&OperatorInformationArea); SetOiaModified(); if ((Command == CMD_ERASE_WRITE) || (Command == CMD_SNA_ERASE_WRITE)) { newlines = 24; newcolumns = 80; } else { newlines = MaxNumberLines; newcolumns = MaxNumberColumns; } if ((newlines != NumberLines) || (newcolumns != NumberColumns)) { /* * The LocalClearScreen() is really for when we * are going from a larger screen to a smaller * screen, and we need to clear off the stuff * at the end of the lines, or the lines at * the end of the screen. */ LocalClearScreen(); NumberLines = newlines; NumberColumns = newcolumns; ScreenSize = NumberLines * NumberColumns; } Clear3270(); #if !defined(PURE3274) if (TransparentClock == OutputClock) { TransStop(); } #endif /* !defined(PURE3274) */ break; } case CMD_ERASE_ALL_UNPROTECTED: case CMD_SNA_ERASE_ALL_UNPROTECTED: SetOiaOnlineA(&OperatorInformationArea); ResetOiaTWait(&OperatorInformationArea); SetOiaModified(); CursorAddress = HighestScreen()+1; for (i = LowestScreen(); i <= HighestScreen(); i = ScreenInc(i)) { if (IsUnProtected(i)) { if (CursorAddress > i) { CursorAddress = i; } AddHost(i, '\0'); } if (HasMdt(i)) { TurnOffMdt(i); } } if (CursorAddress == HighestScreen()+1) { CursorAddress = SetBufferAddress(0,0); } UnLocked = 1; AidByte = 0; ResetOiaSystemLocked(&OperatorInformationArea); SetOiaModified(); TerminalIn(); break; case CMD_WRITE: case CMD_SNA_WRITE: SetOiaOnlineA(&OperatorInformationArea); ResetOiaTWait(&OperatorInformationArea); SetOiaModified(); break; default: { char s_buffer[100]; sprintf(s_buffer, "Unexpected write command code 0x%x received.\n", Command); ExitString(s_buffer, 1); break; } } count -= 2; /* strip off command and wcc */ buffer += 2; } else { #if !defined(PURE3274) if (TransparentClock == OutputClock) { TransOut(buffer, count, -1, control); count = 0; } #endif /* !defined(PURE3274) */ } LastWasTerminated = 0; /* then, reset at end... */ while (count) { count--; c = *buffer++; if (IsOrder(c)) { /* handle an order */ switch (c) { # define Ensure(x) if (count < x) { \ if (!control) { \ return(origCount-(count+1)); \ } else { \ /* XXX - should not occur */ \ count = 0; \ break; \ } \ } case ORDER_SF: Ensure(1); c = *buffer++; count--; if ( ! (IsStartField(BufferAddress) && FieldAttributes(BufferAddress) == c)) { SetHighestLowest(BufferAddress); NewField(BufferAddress,c); } BufferAddress = ScreenInc(BufferAddress); break; case ORDER_SBA: Ensure(2); i = buffer[0]; c = buffer[1]; #if !defined(PURE3274) /* Check for transparent write */ if ((i == 0) && ((c == 0) || (c == 1) || (c == 5))) { TransparentClock = OutputClock+1; TransOut(buffer+2, count-2, c, control); buffer += count; count -= count; break; } #endif /* !defined(PURE3274) */ BufferAddress = Addr3270(i, c); buffer += 2; count -= 2; break; case ORDER_IC: CursorAddress = BufferAddress; break; /* * XXX - PT is supposed to null fill the screen buffer * under certain draconian conditions. */ case ORDER_PT: i = BufferAddress; do { if (IsStartField(i)) { if (!IsProtected(ScreenInc(i))) { break; } } i = ScreenInc(i); } while (i != HighestScreen()); BufferAddress = ScreenInc(i); break; case ORDER_RA: Ensure(3); i = Addr3270(buffer[0], buffer[1]); if ((i < 0) || (i > HighestScreen())) { char s_buffer[200]; sprintf(s_buffer, "tn3270: %s%d.\n\t%s%d%s%d%s\n", "Invalid 3270 order 'Repeat to Address' to address ", i, "(Screen currently set to ", NumberLines, " by ", NumberColumns, ".)"); ExitString(s_buffer, 1); /*NOTREACHED*/ } c = buffer[2]; if (c == ORDER_GE) { Ensure(4); c = buffer[3]; buffer += 4; count -= 4; } else { buffer += 3; count -= 3; } do { AddHost(BufferAddress, ebc_disp[c]); BufferAddress = ScreenInc(BufferAddress); } while (BufferAddress != i); break; case ORDER_EUA: /* (from [here,there), ie: half open interval] */ Ensure(2); /* * Compiler error - msc version 4.0: * "expression too complicated". */ i = WhereAttrByte(BufferAddress); c = FieldAttributes(i); i = Addr3270(buffer[0], buffer[1]); if ((i < 0) || (i > HighestScreen())) { char s_buffer[200]; sprintf(s_buffer, "tn3270: %s%d.\n\t%s%d%s%d%s\n", "Invalid 3270 order 'Erase Unprotected to Address' to address ", i, "(Screen currently set to ", NumberLines, " by ", NumberColumns, ".)"); ExitString(s_buffer, 1); /*NOTREACHED*/ } do { if (IsStartField(BufferAddress)) { c = FieldAttributes(BufferAddress); } else if (!IsProtectedAttr(BufferAddress, c)) { AddHost(BufferAddress, 0); } BufferAddress = ScreenInc(BufferAddress); } while (i != BufferAddress); buffer += 2; count -= 2; break; case ORDER_GE: Ensure(2); /* XXX Should do SOMETHING! */ /* XXX buffer += 0; */ /* XXX count -= 0; *//* For now, just use this character */ break; case ORDER_YALE: /* special YALE defined order */ Ensure(2); /* need at least two characters */ if (*buffer == 0x5b) { i = OptOrder(buffer+1, count-1, control); if (i == 0) { return(origCount-(count+1)); /* come here again */ } else { buffer += 1 + i; count -= (1 + i); } } break; default: { char s_buffer[100]; static struct orders_def unk_order = { 0, "??", "(unknown)" }; struct orders_def *porder = &unk_order; int s_i; for (s_i = 0; s_i <= highestof(orders_def); s_i++) { if (orders_def[s_i].code == c) { porder = &orders_def[s_i]; break; } } sprintf(s_buffer, "Unsupported order '%s' (%s, 0x%x) received.\n", porder->long_name, porder->short_name, c); ExitString(s_buffer, 1); /*NOTREACHED*/ } } if (count < 0) { count = 0; } } else { /* Data comes in large clumps - take it all */ i = BufferAddress; AddHostA(i, ebc_disp[c]); SetHighestLowest(i); i = ScreenInc(i); c = *buffer; while (count && !IsOrder(c)) { AddHostA(i, ebc_disp[c]); i = ScreenInc(i); if (i == LowestScreen()) { SetHighestLowest(HighestScreen()); } count--; buffer++; c = *buffer; } SetHighestLowest(i); BufferAddress = i; } } if (count == 0) { if (control) { #if !defined(PURE3274) OutputClock++; /* time rolls on */ #endif /* !defined(PURE3274) */ if (Wcc & WCC_RESTORE) { #if !defined(PURE3274) if (TransparentClock != OutputClock) { AidByte = 0; } #else /* !defined(PURE3274) */ AidByte = 0; #endif /* !defined(PURE3274) */ UnLocked = 1; ResetOiaSystemLocked(&OperatorInformationArea); SetOiaModified(); SetPsModified(); TerminalIn(); } if (Wcc & WCC_ALARM) { RingBell((char *)0); } } LastWasTerminated = control; /* state for next time */ return(origCount); } else { return(origCount-count); } } /* * Init3270() * * Initialize any 3270 (controller) variables to an initial state * in preparation for accepting a connection. */ void Init3270() { int i; OptInit(); /* initialize mappings */ ClearArray(Host); ClearArray(Orders); for (i = 0; i <= highestof(orders_def); i++) { Orders[orders_def[i].code] = 1; } DeleteAllFields(); /* Clear screen */ Lowest = HighestScreen()+1; Highest = LowestScreen()-1; CursorAddress = BufferAddress = SetBufferAddress(0,0); UnLocked = 1; #if !defined(PURE3274) OutputClock = 1; TransparentClock = -1; #endif /* !defined(PURE3274) */ SetOiaReady3274(&OperatorInformationArea); } void Stop3270() { ResetOiaReady3274(&OperatorInformationArea); }