/* $NetBSD: i82586.h,v 1.3 1995/01/23 04:50:56 mycroft Exp $ */ /*- * Copyright (c) 1992, University of Vermont and State Agricultural College. * Copyright (c) 1992, Garrett A. Wollman. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * Vermont and State Agricultural College and Garrett A. Wollman. * 4. Neither the name of the University nor the name of the author * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Intel 82586 Ethernet chip * Register, bit, and structure definitions. * * Written by GAW with reference to the Clarkson Packet Driver code for this * chip written by Russ Nelson and others. */ struct ie_en_addr { u_char data[6]; }; /* * This is the master configuration block. It tells the hardware where all * the rest of the stuff is. */ struct ie_sys_conf_ptr { u_short mbz; /* must be zero */ u_char ie_bus_use; /* true if 8-bit only */ u_char mbz2[5]; /* must be zero */ caddr_t ie_iscp_ptr; /* 24-bit physaddr of ISCP */ }; /* * Note that this is wired in hardware; the SCP is always located here, no * matter what. */ #define IE_SCP_ADDR 0xfffff4 /* * The tells the hardware where all the rest of the stuff is, too. * FIXME: some of these should be re-commented after we figure out their * REAL function. */ struct ie_int_sys_conf_ptr { u_char ie_busy; /* zeroed after init */ u_char mbz; u_short ie_scb_offset; /* 16-bit physaddr of next struct */ caddr_t ie_base; /* 24-bit physaddr for all 16-bit vars */ }; /* * This FINALLY tells the hardware what to do and where to put it. */ struct ie_sys_ctl_block { u_short ie_status; /* status word */ u_short ie_command; /* command word */ u_short ie_command_list; /* 16-pointer to command block list */ u_short ie_recv_list; /* 16-pointer to receive frame list */ u_short ie_err_crc; /* CRC errors */ u_short ie_err_align; /* Alignment errors */ u_short ie_err_resource; /* Resource errors */ u_short ie_err_overrun; /* Overrun errors */ }; /* Command values */ #define IE_RU_COMMAND 0x0070 /* mask for RU command */ #define IE_RU_NOP 0 /* for completeness */ #define IE_RU_START 0x0010 /* start receive unit command */ #define IE_RU_ENABLE 0x0020 /* enable receiver command */ #define IE_RU_DISABLE 0x0030 /* disable receiver command */ #define IE_RU_ABORT 0x0040 /* abort current receive operation */ #define IE_CU_COMMAND 0x0700 /* mask for CU command */ #define IE_CU_NOP 0 /* included for completeness */ #define IE_CU_START 0x0100 /* do-command command */ #define IE_CU_RESUME 0x0200 /* resume a suspended cmd list */ #define IE_CU_STOP 0x0300 /* SUSPEND was already taken */ #define IE_CU_ABORT 0x0400 /* abort current command */ #define IE_ACK_COMMAND 0xf000 /* mask for ACK command */ #define IE_ACK_CX 0x8000 /* ack IE_ST_DONE */ #define IE_ACK_FR 0x4000 /* ack IE_ST_RECV */ #define IE_ACK_CNA 0x2000 /* ack IE_ST_ALLDONE */ #define IE_ACK_RNR 0x1000 /* ack IE_ST_RNR */ #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START) /* is this command an action command? */ /* Status values */ #define IE_ST_WHENCE 0xf000 /* mask for cause of interrupt */ #define IE_ST_DONE 0x8000 /* command with I bit completed */ #define IE_ST_RECV 0x4000 /* frame received */ #define IE_ST_ALLDONE 0x2000 /* all commands completed */ #define IE_ST_RNR 0x1000 /* receive not ready */ #define IE_CU_STATUS 0x700 /* mask for command unit status */ #define IE_CU_ACTIVE 0x200 /* command unit is active */ #define IE_CU_SUSPEND 0x100 /* command unit is suspended */ #define IE_RU_STATUS 0x70 /* mask for receiver unit status */ #define IE_RU_SUSPEND 0x10 /* receiver is suspended */ #define IE_RU_NOSPACE 0x20 /* receiver has no resources */ #define IE_RU_READY 0x40 /* reveiver is ready */ /* * This is filled in partially by the chip, partially by us. */ struct ie_recv_frame_desc { u_short ie_fd_status; /* status for this frame */ u_short ie_fd_last; /* end of frame list flag */ u_short ie_fd_next; /* 16-pointer to next RFD */ u_short ie_fd_buf_desc; /* 16-pointer to list of buffer desc's */ struct ie_en_addr dest; /* destination ether */ struct ie_en_addr src; /* source ether */ u_short ie_length; /* 802 length/Ether type */ u_short mbz; /* must be zero */ }; #define IE_FD_LAST 0x8000 /* last rfd in list */ #define IE_FD_SUSP 0x4000 /* suspend RU after receipt */ #define IE_FD_COMPLETE 0x8000 /* frame is complete */ #define IE_FD_BUSY 0x4000 /* frame is busy */ #define IE_FD_OK 0x2000 /* frame is bad */ #define IE_FD_RNR 0x0200 /* receiver out of resources here */ /* * linked list of buffers... */ struct ie_recv_buf_desc { u_short ie_rbd_actual; /* status for this buffer */ u_short ie_rbd_next; /* 16-pointer to next RBD */ caddr_t ie_rbd_buffer; /* 24-pointer to buffer for this RBD */ u_short ie_rbd_length; /* length of the buffer */ u_short mbz; /* must be zero */ }; #define IE_RBD_LAST 0x8000 /* last buffer */ #define IE_RBD_USED 0x4000 /* this buffer has data */ /* * All commands share this in common. */ struct ie_cmd_common { u_short ie_cmd_status; /* status of this command */ u_short ie_cmd_cmd; /* command word */ u_short ie_cmd_link; /* link to next command */ }; #define IE_STAT_COMPL 0x8000 /* command is completed */ #define IE_STAT_BUSY 0x4000 /* command is running now */ #define IE_STAT_OK 0x2000 /* command completed successfully */ #define IE_STAT_ABORT 0x1000 /* command was aborted */ #define IE_CMD_NOP 0x0000 /* NOP */ #define IE_CMD_IASETUP 0x0001 /* initial address setup */ #define IE_CMD_CONFIG 0x0002 /* configure command */ #define IE_CMD_MCAST 0x0003 /* multicast setup command */ #define IE_CMD_XMIT 0x0004 /* transmit command */ #define IE_CMD_TDR 0x0005 /* time-domain reflectometer command */ #define IE_CMD_DUMP 0x0006 /* dump command */ #define IE_CMD_DIAGNOSE 0x0007 /* diagnostics command */ #define IE_CMD_LAST 0x8000 /* this is the last command in the list */ #define IE_CMD_SUSPEND 0x4000 /* suspend CU after this command */ #define IE_CMD_INTR 0x2000 /* post an interrupt after completion */ /* * This is the command to transmit a frame. */ struct ie_xmit_cmd { struct ie_cmd_common com; /* common part */ #define ie_xmit_status com.ie_cmd_status u_short ie_xmit_desc; /* 16-pointer to buffer descriptor */ struct ie_en_addr ie_xmit_addr; /* destination address */ u_short ie_xmit_length; /* 802.3 length/Ether type field */ }; #define IE_XS_MAXCOLL 0x000f /* number of collisions during transmit */ #define IE_XS_EXCMAX 0x0020 /* exceeded maximum number of collisions */ #define IE_XS_SQE 0x0040 /* SQE positive */ #define IE_XS_DEFERRED 0x0080 /* transmission deferred */ #define IE_XS_UNDERRUN 0x0100 /* DMA underrun */ #define IE_XS_LOSTCTS 0x0200 /* Lost CTS */ #define IE_XS_NOCARRIER 0x0400 /* No Carrier */ /* * This is a buffer descriptor for a frame to be transmitted. */ struct ie_xmit_buf { u_short ie_xmit_flags; /* see below */ u_short ie_xmit_next; /* 16-pointer to next desc. */ caddr_t ie_xmit_buf; /* 24-pointer to the actual buffer */ }; #define IE_XMIT_LAST 0x8000 /* this TBD is the last one */ /* The rest of the `flags' word is actually the length. */ /* * Multicast setup command. */ #define MAXMCAST 250 /* must fit in transmit buffer */ struct ie_mcast_cmd { struct ie_cmd_common com; /* common part */ #define ie_mcast_status com.ie_cmd_status u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */ struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */ }; /* * Time Domain Reflectometer command. */ struct ie_tdr_cmd { struct ie_cmd_common com; /* common part */ #define ie_tdr_status com.ie_cmd_status u_short ie_tdr_time; /* error bits and time */ }; #define IE_TDR_SUCCESS 0x8000 /* TDR succeeded without error */ #define IE_TDR_XCVR 0x4000 /* detected a transceiver problem */ #define IE_TDR_OPEN 0x2000 /* detected an open */ #define IE_TDR_SHORT 0x1000 /* TDR detected a short */ #define IE_TDR_TIME 0x07ff /* mask for reflection time */ /* * Initial Address Setup command */ struct ie_iasetup_cmd { struct ie_cmd_common com; #define ie_iasetup_status com.ie_cmd_status struct ie_en_addr ie_address; }; /* * Configuration command */ struct ie_config_cmd { struct ie_cmd_common com; /* common part */ #define ie_config_status com.ie_cmd_status u_char ie_config_count; /* byte count (0x0c) */ u_char ie_fifo; /* fifo (8) */ u_char ie_save_bad; /* save bad frames (0x40) */ u_char ie_addr_len; /* address length (0x2e) (AL-LOC == 1) */ u_char ie_priority; /* priority and backoff (0x0) */ u_char ie_ifs; /* inter-frame spacing (0x60) */ u_char ie_slot_low; /* slot time, LSB (0x0) */ u_char ie_slot_high; /* slot time, MSN, and retries (0xf2) */ u_char ie_promisc; /* 1 if promiscuous, else 0 */ u_char ie_crs_cdt; /* CSMA/CD parameters (0x0) */ u_char ie_min_len; /* min frame length (0x40) */ u_char ie_junk; /* stuff for 82596 (0xff) */ };