.\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the project nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $NetBSD: rtadvd.conf.5,v 1.2 1999/07/03 18:12:18 itojun Exp $ .\" KAME Id: rtadvd.conf.5,v 1.1.2.13.2.4.4.1 1999/02/12 08:13:34 sumikawa Exp .\" .Dd May 17, 1998 .Dt RTADVD.CONF 5 .Os .Sh NAME .Nm rtadvd.conf .Nd config file for router advertisement daemon .Sh DESCRIPTION The file describes how the router advertisement packet must be constructed for each of the interfaces. .Pp It obeys famous .Xr termcap 5 file format. Each line in the file describes a network interface. Fields are separated by a colon .Po .Dq \&: .Pc , and each field contains one capability description. Lines may be concatenated by \e character. The comment marker is `#' character. .Pp .Sh CAPABILITIES Capabilities describe the value to be filled into ICMPv6 router advertisement message and to control .Xr rtadvd 8 behavior. Therefore, you are encouraged to read IETF neighbor discovery documents if you would like to modify sample configuration file. .Pp Note that almost all items have default values. If you omit an item, the default value of the item will be used. .Pp There are two items to control interval of sending router advertisements. .Bl -tag -width indent .It Cm \&maxinterval (num) The maximum time allowed between sending unsolicited multicast router advertisements .Pq unit: seconds . The default value is 600. Its value must be no less than 4 seconds and no greater than 1800 seconds. .It Cm \&mininterval (num) The minimum time allowed between sending unsolicited multicast router advertisements .Pq unit: seconds . The default value is the one third of value of .Ic maxinterval. Its value must be no less than 3 seconds and no greater than .75 * the value of .Ic maxinterval. .El .Pp The following items are for ICMPv6 router advertisement message header. .Bl -tag -width indent .It Cm \&chlim (num) The value for Cur Hop Limit field. The default value is 64. .It Cm \&raflags (num) Flags field in router advertisement message header. Bit 7 .Po .Li 0x80 .Pc means Managed address configuration flag bit, and Bit 6 .Po .Li 0x40 .Pc means Other stateful configuration flag bit. The default value is 0. .It Cm \&rltime (num) Router lifetime field .Pq unit: seconds . Its value must be no greater than 3600000. The default value is 1800. .It Cm \&rtime (num) Reachable time field .Pq unit: milliseconds . The default value is 0, which means unspecified by this router. .It Cm \&retrans (num) Retrans Timer field .Pq unit: milliseconds . The default value is 0, which means unspecified by this router. .El .Pp The following items are for ICMPv6 prefix information option, which will be attached to router advertisement header. .Bl -tag -width indent .It Cm \&addrs (num) Number of prefixes. Its default is 0, so it must explicitly be set to positve values if you want to specify any prefix information option. If its value is 0, .Xr rtadvd 8 looks up the system routing table and advertise the prefixes corresponding to interface routes on the interface. If its value is more than 1, you must specify the index of the prefix for each item below. Indices vary from 0 to N-1, where N is the value of .Ic addrs. Each index shall follows the name of each item, e.g. .Dq prefixlen2 . .It Cm \&prefixlen (num) Prefix length field. The default value is 64. .It Cm \&pinfoflags (num) Flags field in prefix information option. Bit 7 .Po .Li 0x80 .Pc means On-link flag bit, and Bit 6 .Po .Li 0x40 .Pc means Autonomous address-configuration flag bit. The default value is 0xc0, i.e. both bits are set. .It Cm \&addr (str) The address filled into Prefix field. Since .Dq \&: is used for .Xr termcap 5 file format as well as IPv6 numeric address, the field MUST be quoted by doublequote character. This field cannot be omitted if the value of .Ic addrs is more than 0. .It Cm \&vltime (num) Valid lifetime field .Pq unit: seconds . The default value is 2592000(30 days). .It Cm \&pltime (num) Preferred lifetime field .Pq unit: seconds . The default value is 604800(7 days). .El .Pp The following items are for ICMPv6 MTU option, which will be attached to router advertisement header. .Bl -tag -width indent .It Cm \&mtu (num or str) MTU (maximum transmission unit) field. If 0 is specified, it means that the option will not be included. The default value is 0. If the special string .Dq auto is specified for this item, MTU option will be included and its value will be set to the interface MTU automatically. .El .Pp The following item controls ICMPv6 source link-layer address option, which will be attached to router advertisement header. .Bl -tag -width indent .It Cm \&nolladdr (bool) By default .Po if .Cm \&nolladdr is not specified .Pc , .Xr rtadvd 8 will try to get link-layer address for the interface from the kernel, and attach that in source link-layer address option. If this capability exists, .Xr rtadvd 8 will not attach source link-layer address option to router advertisement packets. .El .Pp You can also refer one line from another by using .Cm tc capability. See .Xr termcap 5 for details on the capability. .Sh EXAMPLE .Bd -literal -offset # # common definitions. # default:\\ :raflags#0:rltime#3600:\\ :pinfoflags#64:vltime#360000:pltime#360000:mtu#1500: ether:\\ :mtu#1280:tc=default: # # interfaces. # ef0:\\ :addrs#1:\\ :addr="3ffe:501:4819:1000::":tc=ether: ef1:\\ :addrs#2:addr0="3ffe:501:4819:2000::":\\ :addr1="3ffe:501:4819:3000::":tc=ether: .Ed .Sh SEE ALSO .Xr termcap 5 , .Xr rtadvd 8 , .Xr rtsol 8 .Pp Thomas Narten, Erik Nordmark and W. A. Simpson, .Do Neighbor Discovery for IP version 6 (IPv6) .Dc , RFC 2461 .Sh HISTORY The .Xr rtadvd 8 and the configuration file .Nm first appeared in WIDE Hydrangea IPv6 protocol stack kit. .\" .Sh BUGS .\" (to be written)