/* $NetBSD: psh3tp.c,v 1.6 2006/11/12 19:00:42 plunky Exp $ */ /* * Copyright (c) 2005 KIYOHARA Takashi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include "opt_psh3tp.h" #include #include #include #include #include #include #include #include #include #include #include #ifdef PSH3TP_DEBUG volatile int psh3tp_debug = 4; #define DPRINTF_PRINTF printf_nolog #define DPRINTF(arg) if (psh3tp_debug) DPRINTF_PRINTF arg #define DPRINTFN(n, arg) if (psh3tp_debug > (n)) DPRINTF_PRINTF arg #else #define DPRINTF(arg) ((void)0) #define DPRINTFN(n, arg) ((void)0) #endif /* * PFC bits pertinent to PERSONA HPW-50PA touch-panel */ #define PHDR_TP_PEN_UP 0x40 #define SCPDR_TP_SCAN_ENABLE 0x20 #define SCPDR_TP_SCAN_DISABLE 0x01 #define SCPDR_TP_SCAN_X 0x06 #define SCPDR_TP_SCAN_Y 0x09 /* * A/D converter channels to get x/y from */ #define ADC_CHANNEL_TP_X 1 #define ADC_CHANNEL_TP_Y 0 /* * Default (read: my device) raw X/Y values for framebuffer edges. */ #define PSH3TP_FB_RIGHT 56 #define PSH3TP_FB_LEFT 969 #define PSH3TP_FB_TOP 848 #define PSH3TP_FB_BOTTOM 121 struct psh3tp_softc { struct device sc_dev; #define PSH3TP_WSMOUSE_ENABLED 0x01 int sc_enabled; struct callout sc_touch_ch; struct device *sc_wsmousedev; struct tpcalib_softc sc_tpcalib; /* calibration info for wsmouse */ }; /* config machinery */ static int psh3tp_match(struct device *, struct cfdata *, void *); static void psh3tp_attach(struct device *, struct device *, void *); /* wsmouse accessops */ static int psh3tp_wsmouse_enable(void *); static int psh3tp_wsmouse_ioctl(void *, u_long, caddr_t, int, struct lwp *); static void psh3tp_wsmouse_disable(void *); /* internal driver routines */ static void psh3tp_enable(struct psh3tp_softc *); static void psh3tp_disable(struct psh3tp_softc *); static int psh3tp_set_enable(struct psh3tp_softc *, int, int); static int psh3tp_intr(void *); static void psh3tp_start_polling(void *); static void psh3tp_stop_polling(struct psh3tp_softc *); static void psh3tp_callout_wsmouse(void *); static void psh3tp_wsmouse_input(struct psh3tp_softc *, int, int); static void psh3tp_get_raw_xy(int *, int *); const struct wsmouse_accessops psh3tp_accessops = { psh3tp_wsmouse_enable, psh3tp_wsmouse_ioctl, psh3tp_wsmouse_disable }; static const struct wsmouse_calibcoords psh3tp_default_calib = { 0, 0, 639, 239, 4, {{ PSH3TP_FB_LEFT, PSH3TP_FB_TOP, 0, 0 }, { PSH3TP_FB_RIGHT, PSH3TP_FB_TOP, 639, 0 }, { PSH3TP_FB_LEFT, PSH3TP_FB_BOTTOM, 0, 239 }, { PSH3TP_FB_RIGHT, PSH3TP_FB_BOTTOM, 639, 239 }} }; CFATTACH_DECL(psh3tp, sizeof(struct psh3tp_softc), psh3tp_match, psh3tp_attach, NULL, NULL); static int psh3tp_match(struct device *parent, struct cfdata *cf, void *aux) { if (!platid_match(&platid, &platid_mask_MACH_HITACHI_PERSONA)) return (0); if (strcmp(cf->cf_name, "psh3tp") != 0) return (0); return (1); } /* * Attach the touch panel driver and its wsmouse child. * * Note that we have to use submatch to distinguish between child because * wsmouse_match matches unconditionally. */ static void psh3tp_attach(struct device *parent, struct device *self, void *aux) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; struct wsmousedev_attach_args wsma; printf("\n"); sc->sc_enabled = 0; /* touch-panel as a pointing device */ wsma.accessops = &psh3tp_accessops; wsma.accesscookie = sc; sc->sc_wsmousedev = config_found_ia( self, "wsmousedev", &wsma, wsmousedevprint); if (sc->sc_wsmousedev == NULL) return; /* init calibration, set default parameters */ tpcalib_init(&sc->sc_tpcalib); tpcalib_ioctl(&sc->sc_tpcalib, WSMOUSEIO_SCALIBCOORDS, (caddr_t)__UNCONST(&psh3tp_default_calib), 0, 0); /* used when in polling mode */ callout_init(&sc->sc_touch_ch); /* establish interrupt handler, but disable until opened */ intc_intr_establish(SH7709_INTEVT2_IRQ2, IST_EDGE, IPL_TTY, psh3tp_intr, sc); intc_intr_disable(SH7709_INTEVT2_IRQ2); } /* * Enable touch panel: we start in interrupt mode. * Must be called at spltty(). */ static void psh3tp_enable(struct psh3tp_softc *sc) { DPRINTFN(2, ("%s: enable\n", sc->sc_dev.dv_xname)); intc_intr_enable(SH7709_INTEVT2_IRQ2); } /* * Disable touch panel: disable interrupt, cancel pending callout. * Must be called at spltty(). */ static void psh3tp_disable(struct psh3tp_softc *sc) { DPRINTFN(2, ("%s: disable\n", sc->sc_dev.dv_xname)); intc_intr_disable(SH7709_INTEVT2_IRQ2); callout_stop(&sc->sc_touch_ch); } static int psh3tp_set_enable(struct psh3tp_softc *sc, int on, int child) { int s = spltty(); if (on) { if (!sc->sc_enabled) psh3tp_enable(sc); sc->sc_enabled |= child; } else { sc->sc_enabled &= ~child; if (!sc->sc_enabled) psh3tp_disable(sc); } splx(s); return (0); } static int psh3tp_wsmouse_enable(void *self) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; DPRINTFN(1, ("%s: wsmouse enable\n", sc->sc_dev.dv_xname)); return (psh3tp_set_enable(sc, 1, PSH3TP_WSMOUSE_ENABLED)); } static void psh3tp_wsmouse_disable(void *self) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; DPRINTFN(1, ("%s: wsmouse disable\n", sc->sc_dev.dv_xname)); psh3tp_set_enable(sc, 0, PSH3TP_WSMOUSE_ENABLED); } static int psh3tp_intr(void *self) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; uint8_t irr0; uint8_t phdr, touched; unsigned int steady, tremor_timeout; irr0 = _reg_read_1(SH7709_IRR0); if ((irr0 & IRR0_IRQ2) == 0) { #ifdef DIAGNOSTIC printf("%s: irr0 %02x?\n", sc->sc_dev.dv_xname, irr0); #endif return (0); } if (!sc->sc_enabled) { DPRINTFN(1, ("%s: intr: !sc_enabled\n", sc->sc_dev.dv_xname)); intc_intr_disable(SH7709_INTEVT2_IRQ2); goto served; } /* * Number of times the "touched" bit should be read * consecutively. */ #define TREMOR_THRESHOLD 0x300 steady = 0; tremor_timeout = TREMOR_THRESHOLD * 16; /* XXX: arbitrary */ touched = TRUE; /* we start with "touched" state */ do { uint8_t state; phdr = _reg_read_1(SH7709_PHDR); state = ((phdr & PHDR_TP_PEN_UP) != PHDR_TP_PEN_UP); if (state == touched) ++steady; else { steady = 0; touched = state; } if (--tremor_timeout == 0) { DPRINTF(("%s: tremor timeout!\n", sc->sc_dev.dv_xname)); goto served; } } while (steady < TREMOR_THRESHOLD); if (touched) { intc_intr_disable(SH7709_INTEVT2_IRQ2); /* * ADC readings are not stable yet, so schedule * callout instead of accessing ADC from the interrupt * handler only to immediately delay(). */ callout_reset(&sc->sc_touch_ch, hz/32, psh3tp_start_polling, sc); } else DPRINTFN(1, ("%s: tremor\n", sc->sc_dev.dv_xname)); served: /* clear the interrupt */ _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ2); return (1); } /* * Called from the interrupt handler at spltty() upon first touch. * Decide if we are going to report this touch as a mouse click/drag. */ static void psh3tp_start_polling(void *self) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; uint8_t phdr; int rawx, rawy; phdr = _reg_read_1(SH7709_PHDR); if ((phdr & PHDR_TP_PEN_UP) == PHDR_TP_PEN_UP) { DPRINTFN(2, ("%s: start: pen is not down\n", sc->sc_dev.dv_xname)); psh3tp_stop_polling(sc); return; } psh3tp_get_raw_xy(&rawx, &rawy); DPRINTFN(2, ("%s: start: %4d %4d -> ", sc->sc_dev.dv_xname, rawx, rawy)); if (sc->sc_enabled & PSH3TP_WSMOUSE_ENABLED) { DPRINTFN(2, ("mouse\n")); psh3tp_wsmouse_input(sc, rawx, rawy); callout_reset(&sc->sc_touch_ch, hz/32, psh3tp_callout_wsmouse, sc); } else { DPRINTFN(2, ("ignore\n")); psh3tp_stop_polling(sc); } } /* * Re-enable touch panel interrupt. * Called at spltty() when polling code detects pen-up. */ static void psh3tp_stop_polling(struct psh3tp_softc *sc) { uint8_t irr0; DPRINTFN(2, ("%s: stop\n", sc->sc_dev.dv_xname)); /* clear pending interrupt signal before re-enabling the interrupt */ irr0 = _reg_read_1(SH7709_IRR0); if ((irr0 & IRR0_IRQ2) != 0) _reg_write_1(SH7709_IRR0, irr0 & ~IRR0_IRQ2); intc_intr_enable(SH7709_INTEVT2_IRQ2); } /* * We are reporting this touch as a mouse click/drag. */ static void psh3tp_callout_wsmouse(void *self) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; uint8_t phdr; int rawx, rawy; int s; s = spltty(); if (!sc->sc_enabled) { DPRINTFN(1, ("%s: wsmouse callout: !sc_enabled\n", sc->sc_dev.dv_xname)); splx(s); return; } phdr = _reg_read_1(SH7709_PHDR); if ((phdr & PHDR_TP_PEN_UP) != PHDR_TP_PEN_UP) { psh3tp_get_raw_xy(&rawx, &rawy); psh3tp_wsmouse_input(sc, rawx, rawy); /* mouse dragged */ callout_schedule(&sc->sc_touch_ch, hz/32); } else { wsmouse_input( /* button up */ sc->sc_wsmousedev, 0, 0, 0, 0, 0, WSMOUSE_INPUT_DELTA); psh3tp_stop_polling(sc); } splx(s); } /* * Report mouse click/drag. */ static void psh3tp_wsmouse_input(struct psh3tp_softc *sc, int rawx, int rawy) { int x, y; tpcalib_trans(&sc->sc_tpcalib, rawx, rawy, &x, &y); DPRINTFN(3, ("%s: %4d %4d -> %3d %3d\n", sc->sc_dev.dv_xname, rawx, rawy, x, y)); wsmouse_input(sc->sc_wsmousedev, 1, /* button */ x, y, 0, 0, WSMOUSE_INPUT_ABSOLUTE_X | WSMOUSE_INPUT_ABSOLUTE_Y); } /* * Read raw X/Y coordinates from the ADC. */ static void psh3tp_get_raw_xy(int *rawxp, int *rawyp) { uint8_t scpdr; /* X axis */ scpdr = _reg_read_1(SH7709_SCPDR); scpdr &= ~SCPDR_TP_SCAN_DISABLE; scpdr |= (SCPDR_TP_SCAN_ENABLE | SCPDR_TP_SCAN_X); _reg_write_1(SH7709_SCPDR, scpdr); delay(40); *rawxp = adc_sample_channel(ADC_CHANNEL_TP_X); /* Y axis */ scpdr = _reg_read_1(SH7709_SCPDR); scpdr &= ~SCPDR_TP_SCAN_X; scpdr |= (SCPDR_TP_SCAN_ENABLE | SCPDR_TP_SCAN_Y); _reg_write_1(SH7709_SCPDR, scpdr); delay(40); *rawyp = adc_sample_channel(ADC_CHANNEL_TP_Y); /* restore SCPDR */ scpdr = _reg_read_1(SH7709_SCPDR); scpdr &= ~(SCPDR_TP_SCAN_ENABLE | SCPDR_TP_SCAN_Y); scpdr |= SCPDR_TP_SCAN_DISABLE; _reg_write_1(SH7709_SCPDR, scpdr); } static int psh3tp_wsmouse_ioctl( void *self, u_long cmd, caddr_t data, int flag, struct lwp *l) { struct psh3tp_softc *sc = (struct psh3tp_softc *)self; return (hpc_tpanel_ioctl(&sc->sc_tpcalib, cmd, data, flag, l)); }