/* $NetBSD: sunscpal.c,v 1.16 2005/02/04 02:10:37 perry Exp $ */ /* * Copyright (c) 2001 Matthew Fredette * Copyright (c) 1995 David Jones, Gordon W. Ross * Copyright (c) 1994 Jarle Greipsland * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * 4. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by * David Jones and Gordon Ross * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This is a machine-independent driver for the Sun "sc" * SCSI Bus Controller (SBC). * * This code should work with any memory-mapped card, * and can be shared by multiple adapters that address * the card with different register offset spacings. * (This can happen on the atari, for example.) * * Credits, history: * * Matthew Fredette completely copied revision 1.38 of * ncr5380sbc.c, and then heavily modified it to match * the Sun sc PAL. The remaining credits are for * ncr5380sbc.c: * * David Jones is the author of most of the code that now * appears in this file, and was the architect of the * current overall structure (MI/MD code separation, etc.) * * Gordon Ross integrated the message phase code, added lots of * comments about what happens when and why (re. SCSI spec.), * debugged some reentrance problems, and added several new * "hooks" needed for the Sun3 "si" adapters. * * The message in/out code was taken nearly verbatim from * the aic6360 driver by Jarle Greipsland. * * Several other NCR5380 drivers were used for reference * while developing this driver, including work by: * The Alice Group (mac68k port) namely: * Allen K. Briggs, Chris P. Caputo, Michael L. Finch, * Bradley A. Grantham, and Lawrence A. Kesteloot * Michael L. Hitch (amiga drivers: sci.c) * Leo Weppelman (atari driver: ncr5380.c) * There are others too. Thanks, everyone. * * Transliteration to bus_space() performed 9/17/98 by * John Ruschmeyer (jruschme@exit109.com) for i386 'nca' driver. * Thank you all. */ #include __KERNEL_RCSID(0, "$NetBSD: sunscpal.c,v 1.16 2005/02/04 02:10:37 perry Exp $"); #include "opt_ddb.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #include #endif #include #include static void sunscpal_reset_scsibus(struct sunscpal_softc *); static void sunscpal_sched(struct sunscpal_softc *); static void sunscpal_done(struct sunscpal_softc *); static int sunscpal_select (struct sunscpal_softc *, struct sunscpal_req *); static void sunscpal_reselect(struct sunscpal_softc *); static int sunscpal_msg_in(struct sunscpal_softc *); static int sunscpal_msg_out(struct sunscpal_softc *); static int sunscpal_data_xfer(struct sunscpal_softc *, int); static int sunscpal_command(struct sunscpal_softc *); static int sunscpal_status(struct sunscpal_softc *); static void sunscpal_machine(struct sunscpal_softc *); void sunscpal_abort(struct sunscpal_softc *); void sunscpal_cmd_timeout(void *); /* * Action flags returned by the info_transfer functions: * (These determine what happens next.) */ #define ACT_CONTINUE 0x00 /* No flags: expect another phase */ #define ACT_DISCONNECT 0x01 /* Target is disconnecting */ #define ACT_CMD_DONE 0x02 /* Need to call scsipi_done() */ #define ACT_RESET_BUS 0x04 /* Need bus reset (cmd timeout) */ #define ACT_WAIT_DMA 0x10 /* Wait for DMA to complete */ /***************************************************************** * Debugging stuff *****************************************************************/ #ifndef DDB /* This is used only in recoverable places. */ #ifndef Debugger #define Debugger() printf("Debug: sunscpal.c:%d\n", __LINE__) #endif #endif #ifdef SUNSCPAL_DEBUG #define SUNSCPAL_DBG_BREAK 1 #define SUNSCPAL_DBG_CMDS 2 #define SUNSCPAL_DBG_DMA 4 int sunscpal_debug = 0; #define SUNSCPAL_BREAK() \ do { if (sunscpal_debug & SUNSCPAL_DBG_BREAK) Debugger(); } while (0) static void sunscpal_show_scsi_cmd(struct scsipi_xfer *); #ifdef DDB void sunscpal_clear_trace(void); void sunscpal_show_trace(void); void sunscpal_show_req(struct sunscpal_req *); void sunscpal_show_state(void); #endif /* DDB */ #else /* SUNSCPAL_DEBUG */ #define SUNSCPAL_BREAK() /* nada */ #define sunscpal_show_scsi_cmd(xs) /* nada */ #endif /* SUNSCPAL_DEBUG */ static char * phase_names[8] = { "DATA_OUT", "DATA_IN", "COMMAND", "STATUS", "UNSPEC1", "UNSPEC2", "MSG_OUT", "MSG_IN", }; #ifdef SUNSCPAL_USE_BUS_DMA static void sunscpal_dma_alloc(struct sunscpal_softc *); static void sunscpal_dma_free(struct sunscpal_softc *); static void sunscpal_dma_setup(struct sunscpal_softc *); #else #define sunscpal_dma_alloc(sc) (*sc->sc_dma_alloc)(sc) #define sunscpal_dma_free(sc) (*sc->sc_dma_free)(sc) #define sunscpal_dma_setup(sc) (*sc->sc_dma_setup)(sc) #endif static void sunscpal_minphys(struct buf *); /***************************************************************** * Actual chip control *****************************************************************/ /* * XXX: These timeouts might need to be tuned... */ /* This one is used when waiting for a phase change. (X100uS.) */ int sunscpal_wait_phase_timo = 1000 * 10 * 300; /* 5 min. */ /* These are used in the following inline functions. */ int sunscpal_wait_req_timo = 1000 * 50; /* X2 = 100 mS. */ int sunscpal_wait_nrq_timo = 1000 * 25; /* X2 = 50 mS. */ static __inline int sunscpal_wait_req(struct sunscpal_softc *); static __inline int sunscpal_wait_not_req(struct sunscpal_softc *); static __inline void sunscpal_sched_msgout(struct sunscpal_softc *, int); /* Return zero on success. */ static __inline int sunscpal_wait_req(sc) struct sunscpal_softc *sc; { int timo = sunscpal_wait_req_timo; for (;;) { if (SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_REQUEST) { timo = 0; /* return 0 */ break; } if (--timo < 0) break; /* return -1 */ delay(2); } return (timo); } /* Return zero on success. */ static __inline int sunscpal_wait_not_req(sc) struct sunscpal_softc *sc; { int timo = sunscpal_wait_nrq_timo; for (;;) { if ((SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_REQUEST) == 0) { timo = 0; /* return 0 */ break; } if (--timo < 0) break; /* return -1 */ delay(2); } return (timo); } /* * These functions control DMA functions in the chipset independent of * the host DMA implementation. */ static void sunscpal_dma_start(struct sunscpal_softc *); static void sunscpal_dma_poll(struct sunscpal_softc *); static void sunscpal_dma_stop(struct sunscpal_softc *); static void sunscpal_dma_start(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; int xlen; u_int16_t icr; xlen = sc->sc_reqlen; /* Let'er rip! */ icr = SUNSCPAL_READ_2(sc, sunscpal_icr); icr |= SUNSCPAL_ICR_DMA_ENABLE | ((xlen & 1) ? 0 : SUNSCPAL_ICR_WORD_MODE) | ((sr->sr_flags & SR_IMMED) ? 0 : SUNSCPAL_ICR_INTERRUPT_ENABLE); SUNSCPAL_WRITE_2(sc, sunscpal_icr, icr); sc->sc_state |= SUNSCPAL_DOINGDMA; #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_DMA) { printf("sunscpal_dma_start: started, flags=0x%x\n", sc->sc_state); } #endif } #define ICR_MASK (SUNSCPAL_ICR_PARITY_ERROR | SUNSCPAL_ICR_BUS_ERROR | SUNSCPAL_ICR_INTERRUPT_REQUEST) #define POLL_TIMO 50000 /* X100 = 5 sec. */ /* * Poll (spin-wait) for DMA completion. * Called right after xx_dma_start(), and * xx_dma_stop() will be called next. */ static void sunscpal_dma_poll(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; int tmo; /* Make sure DMA started successfully. */ if (sc->sc_state & SUNSCPAL_ABORTING) return; /* Wait for any "DMA complete" or error bits. */ tmo = POLL_TIMO; for (;;) { if (SUNSCPAL_READ_2(sc, sunscpal_icr) & ICR_MASK) break; if (--tmo <= 0) { printf("sc: DMA timeout (while polling)\n"); /* Indicate timeout as MI code would. */ sr->sr_flags |= SR_OVERDUE; break; } delay(100); } SUNSCPAL_TRACE("sunscpal_dma_poll: waited %d\n", POLL_TIMO - tmo); #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_DMA) { char buffer[64]; bitmask_snprintf(SUNSCPAL_READ_2(sc, sunscpal_icr), SUNSCPAL_ICR_BITS, buffer, sizeof(buffer)); printf("sunscpal_dma_poll: done, icr=%s\n", buffer); } #endif } static void sunscpal_dma_stop(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; struct scsipi_xfer *xs = sr->sr_xs; int resid, ntrans; u_int16_t icr; if ((sc->sc_state & SUNSCPAL_DOINGDMA) == 0) { #ifdef DEBUG printf("sunscpal_dma_stop: DMA not running\n"); #endif return; } sc->sc_state &= ~SUNSCPAL_DOINGDMA; /* First, halt the DMA engine. */ icr = SUNSCPAL_READ_2(sc, sunscpal_icr); icr &= ~(SUNSCPAL_ICR_DMA_ENABLE | SUNSCPAL_ICR_WORD_MODE | SUNSCPAL_ICR_INTERRUPT_ENABLE); SUNSCPAL_WRITE_2(sc, sunscpal_icr, icr); #ifdef SUNSCPAL_USE_BUS_DMA /* * XXX - this function is supposed to be independent of * the host's DMA implementation. */ { sunscpal_dma_handle_t dh = sr->sr_dma_hand; /* sync the DMA map: */ bus_dmamap_sync(sc->sunscpal_dmat, dh->dh_dmamap, 0, dh->dh_maplen, ((xs->xs_control & XS_CTL_DATA_OUT) == 0 ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)); } #endif /* SUNSCPAL_USE_BUS_DMA */ if (icr & (SUNSCPAL_ICR_BUS_ERROR)) { char buffer[64]; bitmask_snprintf(icr, SUNSCPAL_ICR_BITS, buffer, sizeof(buffer)); printf("sc: DMA error, icr=%s, reset\n", buffer); sr->sr_xs->error = XS_DRIVER_STUFFUP; sc->sc_state |= SUNSCPAL_ABORTING; goto out; } /* Note that timeout may have set the error flag. */ if (sc->sc_state & SUNSCPAL_ABORTING) goto out; /* XXX: Wait for DMA to actually finish? */ /* * Now try to figure out how much actually transferred */ resid = SUNSCPAL_DMA_COUNT_FLIP(SUNSCPAL_READ_2(sc, sunscpal_dma_count)); ntrans = sc->sc_reqlen - resid; #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_DMA) { printf("sunscpal_dma_stop: resid=0x%x ntrans=0x%x\n", resid, ntrans); } #endif if (ntrans < sc->sc_min_dma_len) { printf("sc: DMA count: 0x%x\n", resid); sc->sc_state |= SUNSCPAL_ABORTING; goto out; } if (ntrans > sc->sc_datalen) panic("sunscpal_dma_stop: excess transfer"); /* Adjust data pointer */ sc->sc_dataptr += ntrans; sc->sc_datalen -= ntrans; /* * After a read, we may need to clean-up * "Left-over bytes" (yuck!) */ if (((xs->xs_control & XS_CTL_DATA_OUT) == 0) && ((icr & SUNSCPAL_ICR_ODD_LENGTH) != 0)) { #ifdef DEBUG printf("sc: Got Left-over bytes!\n"); #endif *(sc->sc_dataptr++) = SUNSCPAL_READ_1(sc, sunscpal_data); sc->sc_datalen--; } out: SUNSCPAL_WRITE_2(sc, sunscpal_dma_count, SUNSCPAL_DMA_COUNT_FLIP(0)); } /* Ask the target for a MSG_OUT phase. */ static __inline void sunscpal_sched_msgout(sc, msg_code) struct sunscpal_softc *sc; int msg_code; { /* * This controller does not allow you to assert ATN, which * will eventually leave us with no option other than to reset * the bus. We keep this function as a placeholder, though, * and this printf will eventually go away or get #ifdef'ed: */ printf("sunscpal_sched_msgout: trying to schedule 0x%0x\n", msg_code); sc->sc_msgpriq |= msg_code; } int sunscpal_pio_out(sc, phase, count, data) struct sunscpal_softc *sc; int phase, count; unsigned char *data; { int resid; resid = count; while (resid > 0) { if (!SUNSCPAL_BUSY(sc)) { SUNSCPAL_TRACE("pio_out: lost BSY, resid=%d\n", resid); break; } if (sunscpal_wait_req(sc)) { SUNSCPAL_TRACE("pio_out: no REQ, resid=%d\n", resid); break; } if (SUNSCPAL_BUS_PHASE(SUNSCPAL_READ_2(sc, sunscpal_icr)) != phase) break; /* Put the data on the bus. */ if (data) { SUNSCPAL_BYTE_WRITE(sc, phase, *data++); } else { SUNSCPAL_BYTE_WRITE(sc, phase, 0); } --resid; } return (count - resid); } int sunscpal_pio_in(sc, phase, count, data) struct sunscpal_softc *sc; int phase, count; unsigned char *data; { int resid; resid = count; while (resid > 0) { if (!SUNSCPAL_BUSY(sc)) { SUNSCPAL_TRACE("pio_in: lost BSY, resid=%d\n", resid); break; } if (sunscpal_wait_req(sc)) { SUNSCPAL_TRACE("pio_in: no REQ, resid=%d\n", resid); break; } /* A phase change is not valid until AFTER REQ rises! */ if (SUNSCPAL_BUS_PHASE(SUNSCPAL_READ_2(sc, sunscpal_icr)) != phase) break; /* Read the data bus. */ if (data) *data++ = SUNSCPAL_BYTE_READ(sc, phase); else (void) SUNSCPAL_BYTE_READ(sc, phase); --resid; } return (count - resid); } void sunscpal_init(sc) struct sunscpal_softc *sc; { int i, j; #ifdef SUNSCPAL_DEBUG sunscpal_debug_sc = sc; #endif for (i = 0; i < SUNSCPAL_OPENINGS; i++) sc->sc_ring[i].sr_xs = NULL; for (i = 0; i < 8; i++) for (j = 0; j < 8; j++) sc->sc_matrix[i][j] = NULL; sc->sc_prevphase = SUNSCPAL_PHASE_INVALID; sc->sc_state = SUNSCPAL_IDLE; SUNSCPAL_WRITE_2(sc, sunscpal_icr, 0); SUNSCPAL_WRITE_2(sc, sunscpal_dma_addr_h, 0); SUNSCPAL_WRITE_2(sc, sunscpal_dma_addr_l, 0); SUNSCPAL_WRITE_2(sc, sunscpal_dma_count, SUNSCPAL_DMA_COUNT_FLIP(0)); SUNSCPAL_CLR_INTR(sc); /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_on) { SUNSCPAL_TRACE("init: intr ON\n", 0); sc->sc_intr_on(sc); } } static void sunscpal_reset_scsibus(sc) struct sunscpal_softc *sc; { SUNSCPAL_TRACE("reset_scsibus, cur=0x%x\n", (long) sc->sc_current); SUNSCPAL_WRITE_2(sc, sunscpal_icr, SUNSCPAL_ICR_RESET); delay(500); SUNSCPAL_WRITE_2(sc, sunscpal_icr, 0); SUNSCPAL_CLR_INTR(sc); /* XXX - Need long delay here! */ delay(100000); /* XXX - Need to cancel disconnected requests. */ } /* * Interrupt handler for the SCSI Bus Controller (SBC) * This may also called for a DMA timeout (at splbio). */ int sunscpal_intr(arg) void *arg; { struct sunscpal_softc *sc = arg; int claimed = 0; /* * Do not touch SBC regs here unless sc_current == NULL * or it will complain about "register conflict" errors. * Instead, just let sunscpal_machine() deal with it. */ SUNSCPAL_TRACE("intr: top, state=%d\n", sc->sc_state); if (sc->sc_state == SUNSCPAL_IDLE) { /* * Might be reselect. sunscpal_reselect() will check, * and set up the connection if so. This will verify * that sc_current == NULL at the beginning... */ /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_off) { SUNSCPAL_TRACE("intr: for reselect, intr off\n", 0); sc->sc_intr_off(sc); } sunscpal_reselect(sc); } /* * The remaining documented interrupt causes are a DMA complete * condition. * * The procedure is to let sunscpal_machine() figure out what * to do next. */ if (sc->sc_state & SUNSCPAL_WORKING) { SUNSCPAL_TRACE("intr: call machine, cur=0x%x\n", (long) sc->sc_current); /* This will usually free-up the nexus. */ sunscpal_machine(sc); SUNSCPAL_TRACE("intr: machine done, cur=0x%x\n", (long) sc->sc_current); claimed = 1; } /* Maybe we can run some commands now... */ if (sc->sc_state == SUNSCPAL_IDLE) { SUNSCPAL_TRACE("intr: call sched, cur=0x%x\n", (long) sc->sc_current); sunscpal_sched(sc); SUNSCPAL_TRACE("intr: sched done, cur=0x%x\n", (long) sc->sc_current); } return claimed; } /* * Abort the current command (i.e. due to timeout) */ void sunscpal_abort(sc) struct sunscpal_softc *sc; { /* * Finish it now. If DMA is in progress, we * can not call sunscpal_sched_msgout() because * that hits the SBC (avoid DMA conflict). */ /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_off) { SUNSCPAL_TRACE("abort: intr off\n", 0); sc->sc_intr_off(sc); } sc->sc_state |= SUNSCPAL_ABORTING; if ((sc->sc_state & SUNSCPAL_DOINGDMA) == 0) { sunscpal_sched_msgout(sc, SEND_ABORT); } SUNSCPAL_TRACE("abort: call machine, cur=0x%x\n", (long) sc->sc_current); sunscpal_machine(sc); SUNSCPAL_TRACE("abort: machine done, cur=0x%x\n", (long) sc->sc_current); /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_on) { SUNSCPAL_TRACE("abort: intr ON\n", 0); sc->sc_intr_on(sc); } } /* * Timeout handler, scheduled for each SCSI command. */ void sunscpal_cmd_timeout(arg) void *arg; { struct sunscpal_req *sr = arg; struct scsipi_xfer *xs; struct scsipi_periph *periph; struct sunscpal_softc *sc; int s; s = splbio(); /* Get all our variables... */ xs = sr->sr_xs; if (xs == NULL) { printf("sunscpal_cmd_timeout: no scsipi_xfer\n"); goto out; } periph = xs->xs_periph; sc = (void *)periph->periph_channel->chan_adapter->adapt_dev; printf("%s: cmd timeout, targ=%d, lun=%d\n", sc->sc_dev.dv_xname, sr->sr_target, sr->sr_lun); /* * Mark the overdue job as failed, and arrange for * sunscpal_machine to terminate it. If the victim * is the current job, call sunscpal_machine() now. * Otherwise arrange for sunscpal_sched() to do it. */ sr->sr_flags |= SR_OVERDUE; if (sc->sc_current == sr) { SUNSCPAL_TRACE("cmd_tmo: call abort, sr=0x%x\n", (long) sr); sunscpal_abort(sc); } else { /* * The driver may be idle, or busy with another job. * Arrange for sunscpal_sched() to do the deed. */ SUNSCPAL_TRACE("cmd_tmo: clear matrix, t/l=0x%02x\n", (sr->sr_target << 4) | sr->sr_lun); sc->sc_matrix[sr->sr_target][sr->sr_lun] = NULL; } /* * We may have aborted the current job, or may have * already been idle. In either case, we should now * be idle, so try to start another job. */ if (sc->sc_state == SUNSCPAL_IDLE) { SUNSCPAL_TRACE("cmd_tmo: call sched, cur=0x%x\n", (long) sc->sc_current); sunscpal_sched(sc); SUNSCPAL_TRACE("cmd_tmo: sched done, cur=0x%x\n", (long) sc->sc_current); } out: splx(s); } /***************************************************************** * Interface to higher level *****************************************************************/ /* * Enter a new SCSI command into the "issue" queue, and * if there is work to do, start it going. * * WARNING: This can be called recursively! * (see comment in sunscpal_done) */ void sunscpal_scsipi_request(chan, req, arg) struct scsipi_channel *chan; scsipi_adapter_req_t req; void *arg; { struct scsipi_xfer *xs; struct scsipi_periph *periph; struct sunscpal_softc *sc = (void *)chan->chan_adapter->adapt_dev; struct sunscpal_req *sr; int s, i, flags; switch (req) { case ADAPTER_REQ_RUN_XFER: xs = arg; periph = xs->xs_periph; flags = xs->xs_control; if (flags & XS_CTL_DATA_UIO) panic("sunscpal: scsi data uio requested"); s = splbio(); if (flags & XS_CTL_POLL) { /* Terminate any current command. */ sr = sc->sc_current; if (sr) { printf("%s: polled request aborting %d/%d\n", sc->sc_dev.dv_xname, sr->sr_target, sr->sr_lun); sunscpal_abort(sc); } if (sc->sc_state != SUNSCPAL_IDLE) { panic("sunscpal_scsi_cmd: polled request, abort failed"); } } /* * Find lowest empty slot in ring buffer. * XXX: What about "fairness" and cmd order? */ for (i = 0; i < SUNSCPAL_OPENINGS; i++) if (sc->sc_ring[i].sr_xs == NULL) goto new; xs->error = XS_RESOURCE_SHORTAGE; SUNSCPAL_TRACE("scsipi_cmd: no openings, rv=%d\n", rv); goto out; new: /* Create queue entry */ sr = &sc->sc_ring[i]; sr->sr_xs = xs; sr->sr_target = xs->xs_periph->periph_target; sr->sr_lun = xs->xs_periph->periph_lun; sr->sr_dma_hand = NULL; sr->sr_dataptr = xs->data; sr->sr_datalen = xs->datalen; sr->sr_flags = (flags & XS_CTL_POLL) ? SR_IMMED : 0; sr->sr_status = -1; /* no value */ sc->sc_ncmds++; SUNSCPAL_TRACE("scsipi_cmd: new sr=0x%x\n", (long)sr); if (flags & XS_CTL_POLL) { /* Force this new command to be next. */ sc->sc_rr = i; } /* * If we were idle, run some commands... */ if (sc->sc_state == SUNSCPAL_IDLE) { SUNSCPAL_TRACE("scsipi_cmd: call sched, cur=0x%x\n", (long) sc->sc_current); sunscpal_sched(sc); SUNSCPAL_TRACE("scsipi_cmd: sched done, cur=0x%x\n", (long) sc->sc_current); } if (flags & XS_CTL_POLL) { /* Make sure sunscpal_sched() finished it. */ if ((xs->xs_status & XS_STS_DONE) == 0) panic("sunscpal_scsi_cmd: poll didn't finish"); } out: splx(s); return; case ADAPTER_REQ_GROW_RESOURCES: /* XXX Not supported. */ return; case ADAPTER_REQ_SET_XFER_MODE: { /* * We don't support Sync, Wide, or Tagged Queueing. * Just callback now, to report this. */ struct scsipi_xfer_mode *xm = arg; xm->xm_mode = 0; xm->xm_period = 0; xm->xm_offset = 0; scsipi_async_event(chan, ASYNC_EVENT_XFER_MODE, xm); return; } } } /* * POST PROCESSING OF SCSI_CMD (usually current) * Called by sunscpal_sched(), sunscpal_machine() */ static void sunscpal_done(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr; struct scsipi_xfer *xs; #ifdef DIAGNOSTIC if (sc->sc_state == SUNSCPAL_IDLE) panic("sunscpal_done: state=idle"); if (sc->sc_current == NULL) panic("sunscpal_done: current=0"); #endif sr = sc->sc_current; xs = sr->sr_xs; SUNSCPAL_TRACE("done: top, cur=0x%x\n", (long) sc->sc_current); /* * Clean up DMA resources for this command. */ if (sr->sr_dma_hand) { SUNSCPAL_TRACE("done: dma_free, dh=0x%x\n", (long) sr->sr_dma_hand); sunscpal_dma_free(sc); } #ifdef DIAGNOSTIC if (sr->sr_dma_hand) panic("sunscpal_done: DMA free did not"); #endif if (sc->sc_state & SUNSCPAL_ABORTING) { SUNSCPAL_TRACE("done: aborting, error=%d\n", xs->error); if (xs->error == XS_NOERROR) xs->error = XS_TIMEOUT; } SUNSCPAL_TRACE("done: check error=%d\n", (long) xs->error); /* If error is already set, ignore sr_status value. */ if (xs->error != XS_NOERROR) goto finish; SUNSCPAL_TRACE("done: check status=%d\n", sr->sr_status); xs->status = sr->sr_status; switch (sr->sr_status) { case SCSI_OK: /* 0 */ break; case SCSI_CHECK: case SCSI_BUSY: xs->error = XS_BUSY; break; case -1: /* This is our "impossible" initial value. */ /* fallthrough */ default: printf("%s: target %d, bad status=%d\n", sc->sc_dev.dv_xname, sr->sr_target, sr->sr_status); xs->error = XS_DRIVER_STUFFUP; break; } finish: SUNSCPAL_TRACE("done: finish, error=%d\n", xs->error); /* * Dequeue the finished command, but don't clear sc_state until * after the call to scsipi_done(), because that may call back to * sunscpal_scsi_cmd() - unwanted recursion! * * Keeping sc->sc_state != idle terminates the recursion. */ #ifdef DIAGNOSTIC if ((sc->sc_state & SUNSCPAL_WORKING) == 0) panic("sunscpal_done: bad state"); #endif /* Clear our pointers to the request. */ sc->sc_current = NULL; sc->sc_matrix[sr->sr_target][sr->sr_lun] = NULL; callout_stop(&sr->sr_xs->xs_callout); /* Make the request free. */ sr->sr_xs = NULL; sc->sc_ncmds--; /* Tell common SCSI code it is done. */ scsipi_done(xs); sc->sc_state = SUNSCPAL_IDLE; /* Now sunscpal_sched() may be called again. */ } /* * Schedule a SCSI operation. This routine should return * only after it achieves one of the following conditions: * Busy (sc->sc_state != SUNSCPAL_IDLE) * No more work can be started. */ static void sunscpal_sched(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr; struct scsipi_xfer *xs; int target = 0, lun = 0; int error, i; /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_off) { SUNSCPAL_TRACE("sched: top, intr off\n", 0); sc->sc_intr_off(sc); } next_job: /* * Grab the next job from queue. Must be idle. */ #ifdef DIAGNOSTIC if (sc->sc_state != SUNSCPAL_IDLE) panic("sunscpal_sched: not idle"); if (sc->sc_current) panic("sunscpal_sched: current set"); #endif /* * Always start the search where we last looked. */ i = sc->sc_rr; sr = NULL; do { if (sc->sc_ring[i].sr_xs) { target = sc->sc_ring[i].sr_target; lun = sc->sc_ring[i].sr_lun; if (sc->sc_matrix[target][lun] == NULL) { /* * Do not mark the target/LUN busy yet, * because reselect may cause some other * job to become the current one, so we * might not actually start this job. * Instead, set sc_matrix later on. */ sc->sc_rr = i; sr = &sc->sc_ring[i]; break; } } i++; if (i == SUNSCPAL_OPENINGS) i = 0; } while (i != sc->sc_rr); if (sr == NULL) { SUNSCPAL_TRACE("sched: no work, cur=0x%x\n", (long) sc->sc_current); /* Another hack (Er.. hook!) for anything that needs it: */ if (sc->sc_intr_on) { SUNSCPAL_TRACE("sched: ret, intr ON\n", 0); sc->sc_intr_on(sc); } return; /* No more work to do. */ } SUNSCPAL_TRACE("sched: select for t/l=0x%02x\n", (sr->sr_target << 4) | sr->sr_lun); sc->sc_state = SUNSCPAL_WORKING; error = sunscpal_select(sc, sr); if (sc->sc_current) { /* Lost the race! reselected out from under us! */ /* Work with the reselected job. */ if (sr->sr_flags & SR_IMMED) { printf("%s: reselected while polling (abort)\n", sc->sc_dev.dv_xname); /* Abort the reselected job. */ sc->sc_state |= SUNSCPAL_ABORTING; sc->sc_msgpriq |= SEND_ABORT; } sr = sc->sc_current; xs = sr->sr_xs; SUNSCPAL_TRACE("sched: reselect, new sr=0x%x\n", (long)sr); goto have_nexus; } /* Normal selection result. Target/LUN is now busy. */ sc->sc_matrix[target][lun] = sr; sc->sc_current = sr; /* connected */ xs = sr->sr_xs; /* * Initialize pointers, etc. for this job */ sc->sc_dataptr = sr->sr_dataptr; sc->sc_datalen = sr->sr_datalen; sc->sc_prevphase = SUNSCPAL_PHASE_INVALID; sc->sc_msgpriq = SEND_IDENTIFY; sc->sc_msgoutq = 0; sc->sc_msgout = 0; SUNSCPAL_TRACE("sched: select rv=%d\n", error); switch (error) { case XS_NOERROR: break; case XS_BUSY: /* XXX - Reset and try again. */ printf("%s: select found SCSI bus busy, resetting...\n", sc->sc_dev.dv_xname); sunscpal_reset_scsibus(sc); /* fallthrough */ case XS_SELTIMEOUT: default: xs->error = error; /* from select */ SUNSCPAL_TRACE("sched: call done, sr=0x%x\n", (long)sr); sunscpal_done(sc); /* Paranoia: clear everything. */ sc->sc_dataptr = NULL; sc->sc_datalen = 0; sc->sc_prevphase = SUNSCPAL_PHASE_INVALID; sc->sc_msgpriq = 0; sc->sc_msgoutq = 0; sc->sc_msgout = 0; goto next_job; } /* * Selection was successful. Normally, this means * we are starting a new command. However, this * might be the termination of an overdue job. */ if (sr->sr_flags & SR_OVERDUE) { SUNSCPAL_TRACE("sched: overdue, sr=0x%x\n", (long)sr); sc->sc_state |= SUNSCPAL_ABORTING; sc->sc_msgpriq |= SEND_ABORT; goto have_nexus; } /* * OK, we are starting a new command. * Initialize and allocate resources for the new command. * Device reset is special (only uses MSG_OUT phase). * Normal commands start in MSG_OUT phase where we will * send and IDENDIFY message, and then expect CMD phase. */ #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_CMDS) { printf("sunscpal_sched: begin, target=%d, LUN=%d\n", xs->xs_periph->periph_target, xs->xs_periph->periph_lun); sunscpal_show_scsi_cmd(xs); } #endif if (xs->xs_control & XS_CTL_RESET) { SUNSCPAL_TRACE("sched: cmd=reset, sr=0x%x\n", (long)sr); /* Not an error, so do not set SUNSCPAL_ABORTING */ sc->sc_msgpriq |= SEND_DEV_RESET; goto have_nexus; } #ifdef DIAGNOSTIC if ((xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) == 0) { if (sc->sc_dataptr) { printf("%s: ptr but no data in/out flags?\n", sc->sc_dev.dv_xname); SUNSCPAL_BREAK(); sc->sc_dataptr = NULL; } } #endif /* Allocate DMA space (maybe) */ if (sc->sc_dataptr && (sc->sc_flags & SUNSCPAL_DISABLE_DMA) == 0 && (sc->sc_datalen >= sc->sc_min_dma_len)) { SUNSCPAL_TRACE("sched: dma_alloc, len=%d\n", sc->sc_datalen); sunscpal_dma_alloc(sc); } /* * Initialization hook called just after select, * at the beginning of COMMAND phase. * (but AFTER the DMA allocation is done) * * We need to set up the DMA engine BEFORE the target puts * the SCSI bus into any DATA phase. */ if (sr->sr_dma_hand) { SUNSCPAL_TRACE("sched: dma_setup, dh=0x%x\n", (long) sr->sr_dma_hand); sunscpal_dma_setup(sc); } /* * Schedule a timeout for the job we are starting. */ if ((sr->sr_flags & SR_IMMED) == 0) { i = mstohz(xs->timeout); SUNSCPAL_TRACE("sched: set timeout=%d\n", i); callout_reset(&sr->sr_xs->xs_callout, i, sunscpal_cmd_timeout, sr); } have_nexus: SUNSCPAL_TRACE("sched: call machine, cur=0x%x\n", (long) sc->sc_current); sunscpal_machine(sc); SUNSCPAL_TRACE("sched: machine done, cur=0x%x\n", (long) sc->sc_current); /* * What state did sunscpal_machine() leave us in? * Hopefully it sometimes completes a job... */ if (sc->sc_state == SUNSCPAL_IDLE) goto next_job; return; /* Have work in progress. */ } /* * Reselect handler: checks for reselection, and if we are being * reselected, it sets up sc->sc_current. * * We are reselected when: * SEL is TRUE * IO is TRUE * BSY is FALSE */ void sunscpal_reselect(sc) struct sunscpal_softc *sc; { /* * This controller does not implement disconnect/reselect, so * we really don't have anything to do here. We keep this * function as a placeholder, though. */ } /* * Select target: xs is the transfer that we are selecting for. * sc->sc_current should be NULL. * * Returns: * sc->sc_current != NULL ==> we were reselected (race!) * XS_NOERROR ==> selection worked * XS_BUSY ==> lost arbitration * XS_SELTIMEOUT ==> no response to selection */ static int sunscpal_select(sc, sr) struct sunscpal_softc *sc; struct sunscpal_req *sr; { int timo, target_mask; u_short mode; /* Check for reselect */ sunscpal_reselect(sc); if (sc->sc_current) { SUNSCPAL_TRACE("select: reselect, cur=0x%x\n", (long) sc->sc_current); return XS_BUSY; /* reselected */ } /* * Select the target. */ target_mask = (1 << sr->sr_target); SUNSCPAL_WRITE_1(sc, sunscpal_data, target_mask); SUNSCPAL_WRITE_2(sc, sunscpal_icr, SUNSCPAL_ICR_SELECT); /* * Wait for the target to assert BSY. * SCSI spec. says wait for 250 mS. */ for (timo = 25000;;) { if (SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_BUSY) goto success; if (--timo <= 0) break; delay(10); } SUNSCPAL_WRITE_1(sc, sunscpal_data, 0); SUNSCPAL_WRITE_2(sc, sunscpal_icr, 0); SUNSCPAL_TRACE("select: device down, rc=%d\n", XS_SELTIMEOUT); return XS_SELTIMEOUT; success: /* * The target is now driving BSY, so we can stop * driving SEL and the data bus. We do set up * whether or not this target needs parity. */ mode = 0; if ((sc->sc_parity_disable & target_mask) == 0) mode |= SUNSCPAL_ICR_PARITY_ENABLE; SUNSCPAL_WRITE_2(sc, sunscpal_icr, mode); return XS_NOERROR; } /***************************************************************** * Functions to handle each info. transfer phase: *****************************************************************/ /* * The message system: * * This is a revamped message system that now should easier accomodate * new messages, if necessary. * * Currently we accept these messages: * IDENTIFY (when reselecting) * COMMAND COMPLETE # (expect bus free after messages marked #) * NOOP * MESSAGE REJECT * SYNCHRONOUS DATA TRANSFER REQUEST * SAVE DATA POINTER * RESTORE POINTERS * DISCONNECT # * * We may send these messages in prioritized order: * BUS DEVICE RESET # if XS_CTL_RESET & xs->xs_control (or in * weird sits.) * MESSAGE PARITY ERROR par. err. during MSGI * MESSAGE REJECT If we get a message we don't know how to handle * ABORT # send on errors * INITIATOR DETECTED ERROR also on errors (SCSI2) (during info xfer) * IDENTIFY At the start of each transfer * SYNCHRONOUS DATA TRANSFER REQUEST if appropriate * NOOP if nothing else fits the bill ... */ /* * Precondition: * The SCSI bus is already in the MSGI phase and there is a message byte * on the bus, along with an asserted REQ signal. * * Our return value determines whether our caller, sunscpal_machine() * will expect to see another REQ (and possibly phase change). */ static int sunscpal_msg_in(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; struct scsipi_xfer *xs = sr->sr_xs; int n, phase; int act_flags; act_flags = ACT_CONTINUE; if (sc->sc_prevphase == SUNSCPAL_PHASE_MSG_IN) { /* This is a continuation of the previous message. */ n = sc->sc_imp - sc->sc_imess; SUNSCPAL_TRACE("msg_in: continuation, n=%d\n", n); goto nextbyte; } /* This is a new MESSAGE IN phase. Clean up our state. */ sc->sc_state &= ~SUNSCPAL_DROP_MSGIN; nextmsg: n = 0; sc->sc_imp = &sc->sc_imess[n]; nextbyte: /* * Read a whole message, but don't ack the last byte. If we reject the * message, we have to assert ATN during the message transfer phase * itself. */ for (;;) { /* * Read a message byte. * First, check BSY, REQ, phase... */ if (!SUNSCPAL_BUSY(sc)) { SUNSCPAL_TRACE("msg_in: lost BSY, n=%d\n", n); /* XXX - Assume the command completed? */ act_flags |= (ACT_DISCONNECT | ACT_CMD_DONE); return (act_flags); } if (sunscpal_wait_req(sc)) { SUNSCPAL_TRACE("msg_in: BSY but no REQ, n=%d\n", n); /* Just let sunscpal_machine() handle it... */ return (act_flags); } phase = SUNSCPAL_BUS_PHASE(SUNSCPAL_READ_2(sc, sunscpal_icr)); if (phase != SUNSCPAL_PHASE_MSG_IN) { /* * Target left MESSAGE IN, probably because it * a) noticed our ATN signal, or * b) ran out of messages. */ return (act_flags); } /* Still in MESSAGE IN phase, and REQ is asserted. */ if (SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_PARITY_ERROR) { sunscpal_sched_msgout(sc, SEND_PARITY_ERROR); sc->sc_state |= SUNSCPAL_DROP_MSGIN; } /* Gather incoming message bytes if needed. */ if ((sc->sc_state & SUNSCPAL_DROP_MSGIN) == 0) { if (n >= SUNSCPAL_MAX_MSG_LEN) { sunscpal_sched_msgout(sc, SEND_REJECT); sc->sc_state |= SUNSCPAL_DROP_MSGIN; } else { *sc->sc_imp++ = SUNSCPAL_READ_1(sc, sunscpal_cmd_stat); n++; /* * This testing is suboptimal, but most * messages will be of the one byte variety, so * it should not affect performance * significantly. */ if (n == 1 && MSG_IS1BYTE(sc->sc_imess[0])) goto have_msg; if (n == 2 && MSG_IS2BYTE(sc->sc_imess[0])) goto have_msg; if (n >= 3 && MSG_ISEXTENDED(sc->sc_imess[0]) && n == sc->sc_imess[1] + 2) goto have_msg; } } /* * If we reach this spot we're either: * a) in the middle of a multi-byte message, or * b) dropping bytes. */ if (act_flags != ACT_CONTINUE) return (act_flags); /* back to nextbyte */ } have_msg: /* We now have a complete message. Parse it. */ switch (sc->sc_imess[0]) { case MSG_CMDCOMPLETE: SUNSCPAL_TRACE("msg_in: CMDCOMPLETE\n", 0); /* Target is about to disconnect. */ act_flags |= (ACT_DISCONNECT | ACT_CMD_DONE); break; case MSG_PARITY_ERROR: SUNSCPAL_TRACE("msg_in: PARITY_ERROR\n", 0); /* Resend the last message. */ sunscpal_sched_msgout(sc, sc->sc_msgout); break; case MSG_MESSAGE_REJECT: /* The target rejects the last message we sent. */ SUNSCPAL_TRACE("msg_in: got reject for 0x%x\n", sc->sc_msgout); switch (sc->sc_msgout) { case SEND_IDENTIFY: /* Really old target controller? */ /* XXX ... */ break; case SEND_INIT_DET_ERR: goto abort; } break; case MSG_NOOP: SUNSCPAL_TRACE("msg_in: NOOP\n", 0); break; case MSG_DISCONNECT: SUNSCPAL_TRACE("msg_in: DISCONNECT\n", 0); /* Target is about to disconnect. */ act_flags |= ACT_DISCONNECT; if ((xs->xs_periph->periph_quirks & PQUIRK_AUTOSAVE) == 0) break; /*FALLTHROUGH*/ case MSG_SAVEDATAPOINTER: SUNSCPAL_TRACE("msg_in: SAVE_PTRS\n", 0); sr->sr_dataptr = sc->sc_dataptr; sr->sr_datalen = sc->sc_datalen; break; case MSG_RESTOREPOINTERS: SUNSCPAL_TRACE("msg_in: RESTORE_PTRS\n", 0); sc->sc_dataptr = sr->sr_dataptr; sc->sc_datalen = sr->sr_datalen; break; case MSG_EXTENDED: switch (sc->sc_imess[2]) { case MSG_EXT_SDTR: case MSG_EXT_WDTR: /* The ncr5380 can not do synchronous mode. */ goto reject; default: printf("%s: unrecognized MESSAGE EXTENDED; sending REJECT\n", sc->sc_dev.dv_xname); SUNSCPAL_BREAK(); goto reject; } break; default: SUNSCPAL_TRACE("msg_in: eh? imsg=0x%x\n", sc->sc_imess[0]); printf("%s: unrecognized MESSAGE; sending REJECT\n", sc->sc_dev.dv_xname); SUNSCPAL_BREAK(); /* fallthrough */ reject: sunscpal_sched_msgout(sc, SEND_REJECT); break; abort: sc->sc_state |= SUNSCPAL_ABORTING; sunscpal_sched_msgout(sc, SEND_ABORT); break; } /* Go get the next message, if any. */ if (act_flags == ACT_CONTINUE) goto nextmsg; return (act_flags); } /* * The message out (and in) stuff is a bit complicated: * If the target requests another message (sequence) without * having changed phase in between it really asks for a * retransmit, probably due to parity error(s). * The following messages can be sent: * IDENTIFY @ These 4 stem from SCSI command activity * SDTR @ * WDTR @ * DEV_RESET @ * REJECT if MSGI doesn't make sense * PARITY_ERROR if parity error while in MSGI * INIT_DET_ERR if parity error while not in MSGI * ABORT if INIT_DET_ERR rejected * NOOP if asked for a message and there's nothing to send * * Note that we call this one with (sc_current == NULL) * when sending ABORT for unwanted reselections. */ static int sunscpal_msg_out(sc) struct sunscpal_softc *sc; { /* * This controller does not allow you to assert ATN, which * means we will never get the opportunity to send messages to * the target (the bus will never enter this MSG_OUT phase). * This will eventually leave us with no option other than to * reset the bus. We keep this function as a placeholder, * though, and this printf will eventually go away or get * #ifdef'ed: */ printf("sunscpal_msg_out: bus is in MSG_OUT phase?\n"); return (ACT_CONTINUE | ACT_RESET_BUS); } /* * Handle command phase. */ static int sunscpal_command(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; struct scsipi_xfer *xs = sr->sr_xs; int len; /* Assume command can be sent in one go. */ /* XXX: Do this using DMA, and get a phase change intr? */ len = sunscpal_pio_out(sc, SUNSCPAL_PHASE_COMMAND, xs->cmdlen, (u_char *)xs->cmd); if (len != xs->cmdlen) { #ifdef SUNSCPAL_DEBUG printf("sunscpal_command: short transfer: wanted %d got %d.\n", xs->cmdlen, len); sunscpal_show_scsi_cmd(xs); SUNSCPAL_BREAK(); #endif if (len < 6) { xs->error = XS_DRIVER_STUFFUP; sc->sc_state |= SUNSCPAL_ABORTING; sunscpal_sched_msgout(sc, SEND_ABORT); } } return ACT_CONTINUE; } /* * Handle either data_in or data_out */ static int sunscpal_data_xfer(sc, phase) struct sunscpal_softc *sc; int phase; { struct sunscpal_req *sr = sc->sc_current; struct scsipi_xfer *xs = sr->sr_xs; int expected_phase; int len; /* * When aborting a command, disallow any data phase. */ if (sc->sc_state & SUNSCPAL_ABORTING) { printf("%s: aborting, bus phase=%s (reset)\n", sc->sc_dev.dv_xname, phase_names[(phase >> 8) & 7]); return ACT_RESET_BUS; /* XXX */ } /* Validate expected phase (data_in or data_out) */ expected_phase = (xs->xs_control & XS_CTL_DATA_OUT) ? SUNSCPAL_PHASE_DATA_OUT : SUNSCPAL_PHASE_DATA_IN; if (phase != expected_phase) { printf("%s: data phase error\n", sc->sc_dev.dv_xname); goto abort; } /* Make sure we have some data to move. */ if (sc->sc_datalen <= 0) { /* Device needs padding. */ if (phase == SUNSCPAL_PHASE_DATA_IN) sunscpal_pio_in(sc, phase, 4096, NULL); else sunscpal_pio_out(sc, phase, 4096, NULL); /* Make sure that caused a phase change. */ if (SUNSCPAL_BUS_PHASE(SUNSCPAL_READ_2(sc, sunscpal_icr)) == phase) { /* More than 4k is just too much! */ printf("%s: too much data padding\n", sc->sc_dev.dv_xname); goto abort; } return ACT_CONTINUE; } /* * Attempt DMA only if dma_alloc gave us a DMA handle AND * there is enough left to transfer so DMA is worth while. */ if (sr->sr_dma_hand && (sc->sc_datalen >= sc->sc_min_dma_len)) { /* * OK, really start DMA. Note, the MD start function * is responsible for setting the TCMD register, etc. * (Acknowledge the phase change there, not here.) */ SUNSCPAL_TRACE("data_xfer: dma_start, dh=0x%x\n", (long) sr->sr_dma_hand); sunscpal_dma_start(sc); return ACT_WAIT_DMA; } /* * Doing PIO for data transfer. (Possibly "Pseudo DMA") * XXX: Do PDMA functions need to set tcmd later? */ SUNSCPAL_TRACE("data_xfer: doing PIO, len=%d\n", sc->sc_datalen); if (phase == SUNSCPAL_PHASE_DATA_OUT) { len = sunscpal_pio_out(sc, phase, sc->sc_datalen, sc->sc_dataptr); } else { len = sunscpal_pio_in(sc, phase, sc->sc_datalen, sc->sc_dataptr); } sc->sc_dataptr += len; sc->sc_datalen -= len; SUNSCPAL_TRACE("data_xfer: did PIO, resid=%d\n", sc->sc_datalen); return (ACT_CONTINUE); abort: sc->sc_state |= SUNSCPAL_ABORTING; sunscpal_sched_msgout(sc, SEND_ABORT); return (ACT_CONTINUE); } static int sunscpal_status(sc) struct sunscpal_softc *sc; { int len; u_char status; struct sunscpal_req *sr = sc->sc_current; len = sunscpal_pio_in(sc, SUNSCPAL_PHASE_STATUS, 1, &status); if (len) { sr->sr_status = status; } else { printf("sunscpal_status: none?\n"); } return ACT_CONTINUE; } /* * This is the big state machine that follows SCSI phase changes. * This is somewhat like a co-routine. It will do a SCSI command, * and exit if the command is complete, or if it must wait, i.e. * for DMA to complete or for reselect to resume the job. * * The bus must be selected, and we need to know which command is * being undertaken. */ static void sunscpal_machine(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr; struct scsipi_xfer *xs; int act_flags, phase, timo; #ifdef DIAGNOSTIC if (sc->sc_state == SUNSCPAL_IDLE) panic("sunscpal_machine: state=idle"); if (sc->sc_current == NULL) panic("sunscpal_machine: no current cmd"); #endif sr = sc->sc_current; xs = sr->sr_xs; act_flags = ACT_CONTINUE; /* * This will be called by sunscpal_intr() when DMA is * complete. Must stop DMA before touching the PAL or * there will be "register conflict" errors. */ if (sc->sc_state & SUNSCPAL_DOINGDMA) { /* Pick-up where where we left off... */ goto dma_done; } next_phase: if (!SUNSCPAL_BUSY(sc)) { /* Unexpected disconnect */ printf("sunscpal_machine: unexpected disconnect.\n"); xs->error = XS_DRIVER_STUFFUP; act_flags |= (ACT_DISCONNECT | ACT_CMD_DONE); goto do_actions; } /* * Wait for REQ before reading the phase. * Need to wait longer than usual here, because * some devices are just plain slow... */ timo = sunscpal_wait_phase_timo; for (;;) { if (SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_REQUEST) break; if (--timo <= 0) { if (sc->sc_state & SUNSCPAL_ABORTING) { printf("%s: no REQ while aborting, reset\n", sc->sc_dev.dv_xname); act_flags |= ACT_RESET_BUS; goto do_actions; } printf("%s: no REQ for next phase, abort\n", sc->sc_dev.dv_xname); sc->sc_state |= SUNSCPAL_ABORTING; sunscpal_sched_msgout(sc, SEND_ABORT); goto next_phase; } delay(100); } phase = SUNSCPAL_BUS_PHASE(SUNSCPAL_READ_2(sc, sunscpal_icr)); SUNSCPAL_TRACE("machine: phase=%s\n", (long) phase_names[(phase >> 8) & 7]); /* * We assume that the device knows what it's doing, * so any phase is good. */ switch (phase) { case SUNSCPAL_PHASE_DATA_OUT: case SUNSCPAL_PHASE_DATA_IN: act_flags = sunscpal_data_xfer(sc, phase); break; case SUNSCPAL_PHASE_COMMAND: act_flags = sunscpal_command(sc); break; case SUNSCPAL_PHASE_STATUS: act_flags = sunscpal_status(sc); break; case SUNSCPAL_PHASE_MSG_OUT: act_flags = sunscpal_msg_out(sc); break; case SUNSCPAL_PHASE_MSG_IN: act_flags = sunscpal_msg_in(sc); break; default: printf("sunscpal_machine: Unexpected phase 0x%x\n", phase); sc->sc_state |= SUNSCPAL_ABORTING; sunscpal_sched_msgout(sc, SEND_ABORT); goto next_phase; } /* switch */ sc->sc_prevphase = phase; do_actions: if (act_flags & ACT_WAIT_DMA) { act_flags &= ~ACT_WAIT_DMA; /* Wait for DMA to complete (polling, or interrupt). */ if ((sr->sr_flags & SR_IMMED) == 0) { SUNSCPAL_TRACE("machine: wait for DMA intr.\n", 0); return; /* will resume at dma_done */ } /* Busy-wait for it to finish. */ SUNSCPAL_TRACE("machine: dma_poll, dh=0x%x\n", (long) sr->sr_dma_hand); sunscpal_dma_poll(sc); dma_done: /* Return here after interrupt. */ if (sr->sr_flags & SR_OVERDUE) sc->sc_state |= SUNSCPAL_ABORTING; SUNSCPAL_TRACE("machine: dma_stop, dh=0x%x\n", (long) sr->sr_dma_hand); sunscpal_dma_stop(sc); SUNSCPAL_CLR_INTR(sc); /* XXX */ /* * While DMA is running we can not touch the SBC, * so various places just set SUNSCPAL_ABORTING and * expect us the "kick it" when DMA is done. */ if (sc->sc_state & SUNSCPAL_ABORTING) { sunscpal_sched_msgout(sc, SEND_ABORT); } } /* * Check for parity error. * XXX - better place to check? */ if (SUNSCPAL_READ_2(sc, sunscpal_icr) & SUNSCPAL_ICR_PARITY_ERROR) { printf("%s: parity error!\n", sc->sc_dev.dv_xname); /* XXX: sc->sc_state |= SUNSCPAL_ABORTING; */ sunscpal_sched_msgout(sc, SEND_PARITY_ERROR); } if (act_flags == ACT_CONTINUE) goto next_phase; /* All other actions "break" from the loop. */ SUNSCPAL_TRACE("machine: act_flags=0x%x\n", act_flags); if (act_flags & ACT_RESET_BUS) { act_flags |= ACT_CMD_DONE; /* * Reset the SCSI bus, usually due to a timeout. * The error code XS_TIMEOUT allows retries. */ sc->sc_state |= SUNSCPAL_ABORTING; printf("%s: reset SCSI bus for TID=%d LUN=%d\n", sc->sc_dev.dv_xname, sr->sr_target, sr->sr_lun); sunscpal_reset_scsibus(sc); } if (act_flags & ACT_CMD_DONE) { act_flags |= ACT_DISCONNECT; /* Need to call scsipi_done() */ /* XXX: from the aic6360 driver, but why? */ if (sc->sc_datalen < 0) { printf("%s: %d extra bytes from %d:%d\n", sc->sc_dev.dv_xname, -sc->sc_datalen, sr->sr_target, sr->sr_lun); sc->sc_datalen = 0; } xs->resid = sc->sc_datalen; /* Note: this will clear sc_current */ SUNSCPAL_TRACE("machine: call done, cur=0x%x\n", (long)sr); sunscpal_done(sc); } if (act_flags & ACT_DISCONNECT) { /* * The device has dropped BSY (or will soon). * We have to wait here for BSY to drop, otherwise * the next command may decide we need a bus reset. */ timo = sunscpal_wait_req_timo; /* XXX */ for (;;) { if (!SUNSCPAL_BUSY(sc)) goto busfree; if (--timo <= 0) break; delay(2); } /* Device is sitting on the bus! */ printf("%s: Target %d LUN %d stuck busy, resetting...\n", sc->sc_dev.dv_xname, sr->sr_target, sr->sr_lun); sunscpal_reset_scsibus(sc); busfree: SUNSCPAL_TRACE("machine: discon, waited %d\n", sunscpal_wait_req_timo - timo); SUNSCPAL_WRITE_2(sc, sunscpal_icr, 0); if ((act_flags & ACT_CMD_DONE) == 0) { SUNSCPAL_TRACE("machine: discon, cur=0x%x\n", (long)sr); } /* * We may be here due to a disconnect message, * in which case we did NOT call sunscpal_done, * and we need to clear sc_current. */ sc->sc_state = SUNSCPAL_IDLE; sc->sc_current = NULL; /* Paranoia: clear everything. */ sc->sc_dataptr = NULL; sc->sc_datalen = 0; sc->sc_prevphase = SUNSCPAL_PHASE_INVALID; sc->sc_msgpriq = 0; sc->sc_msgoutq = 0; sc->sc_msgout = 0; /* Our caller will re-enable interrupts. */ } } #ifdef SUNSCPAL_DEBUG static void sunscpal_show_scsi_cmd(xs) struct scsipi_xfer *xs; { u_char *b = (u_char *) xs->cmd; int i = 0; scsipi_printaddr(xs->xs_periph); if ( ! ( xs->xs_control & XS_CTL_RESET ) ) { printf("-"); while (i < xs->cmdlen) { if (i) printf(","); printf("%x",b[i++]); } printf("-\n"); } else { printf("-RESET-\n"); } } int sunscpal_traceidx = 0; #define TRACE_MAX 1024 struct trace_ent { char *msg; long val; } sunscpal_tracebuf[TRACE_MAX]; void sunscpal_trace(msg, val) char *msg; long val; { struct trace_ent *tr; int s; s = splbio(); tr = &sunscpal_tracebuf[sunscpal_traceidx]; sunscpal_traceidx++; if (sunscpal_traceidx >= TRACE_MAX) sunscpal_traceidx = 0; tr->msg = msg; tr->val = val; splx(s); } #ifdef DDB void sunscpal_clear_trace() { sunscpal_traceidx = 0; memset((char*) sunscpal_tracebuf, 0, sizeof(sunscpal_tracebuf)); } void sunscpal_show_trace() { struct trace_ent *tr; int idx; idx = sunscpal_traceidx; do { tr = &sunscpal_tracebuf[idx]; idx++; if (idx >= TRACE_MAX) idx = 0; if (tr->msg) db_printf(tr->msg, tr->val); } while (idx != sunscpal_traceidx); } void sunscpal_show_req(sr) struct sunscpal_req *sr; { struct scsipi_xfer *xs = sr->sr_xs; db_printf("TID=%d ", sr->sr_target); db_printf("LUN=%d ", sr->sr_lun); db_printf("dh=%p ", sr->sr_dma_hand); db_printf("dptr=%p ", sr->sr_dataptr); db_printf("dlen=0x%x ", sr->sr_datalen); db_printf("flags=%d ", sr->sr_flags); db_printf("stat=%d ", sr->sr_status); if (xs == NULL) { db_printf("(xs=NULL)\n"); return; } db_printf("\n"); #ifdef SCSIDEBUG show_scsipi_xs(xs); #else db_printf("xs=%p\n", xs); #endif } void sunscpal_show_state() { struct sunscpal_softc *sc; struct sunscpal_req *sr; int i, j, k; sc = sunscpal_debug_sc; if (sc == NULL) { db_printf("sunscpal_debug_sc == NULL\n"); return; } db_printf("sc_ncmds=%d\n", sc->sc_ncmds); k = -1; /* which is current? */ for (i = 0; i < SUNSCPAL_OPENINGS; i++) { sr = &sc->sc_ring[i]; if (sr->sr_xs) { if (sr == sc->sc_current) k = i; db_printf("req %d: (sr=%p)", i, sr); sunscpal_show_req(sr); } } db_printf("sc_rr=%d, current=%d\n", sc->sc_rr, k); db_printf("Active request matrix:\n"); for(i = 0; i < 8; i++) { /* targets */ for (j = 0; j < 8; j++) { /* LUN */ sr = sc->sc_matrix[i][j]; if (sr) { db_printf("TID=%d LUN=%d sr=%p\n", i, j, sr); } } } db_printf("sc_state=0x%x\n", sc->sc_state); db_printf("sc_current=%p\n", sc->sc_current); db_printf("sc_dataptr=%p\n", sc->sc_dataptr); db_printf("sc_datalen=0x%x\n", sc->sc_datalen); db_printf("sc_prevphase=%d\n", sc->sc_prevphase); db_printf("sc_msgpriq=0x%x\n", sc->sc_msgpriq); } #endif /* DDB */ #endif /* SUNSCPAL_DEBUG */ void sunscpal_attach(sc, options) struct sunscpal_softc *sc; int options; { /* * Handle our options. */ printf(": options=0x%x\n", options); sc->sc_parity_disable = (options & SUNSCPAL_OPT_NO_PARITY_CHK); if (options & SUNSCPAL_OPT_DISABLE_DMA) sc->sc_flags |= SUNSCPAL_DISABLE_DMA; /* * Fill in the adapter. */ memset(&sc->sc_adapter, 0, sizeof(sc->sc_adapter)); sc->sc_adapter.adapt_dev = &sc->sc_dev; sc->sc_adapter.adapt_nchannels = 1; sc->sc_adapter.adapt_openings = SUNSCPAL_OPENINGS; sc->sc_adapter.adapt_max_periph = 1; sc->sc_adapter.adapt_request = sunscpal_scsipi_request; sc->sc_adapter.adapt_minphys = sunscpal_minphys; if (options & SUNSCPAL_OPT_FORCE_POLLING) sc->sc_adapter.adapt_flags |= SCSIPI_ADAPT_POLL_ONLY; sc->sc_channel.chan_adapter = &sc->sc_adapter; sc->sc_channel.chan_bustype = &scsi_bustype; sc->sc_channel.chan_channel = 0; sc->sc_channel.chan_ntargets = 8; sc->sc_channel.chan_nluns = 8; sc->sc_channel.chan_id = 7; /* * Add reference to adapter so that we drop the reference after * config_found() to make sure the adatper is disabled. */ if (scsipi_adapter_addref(&sc->sc_adapter) != 0) { printf("%s: unable to enable controller\n", sc->sc_dev.dv_xname); return; } sunscpal_init(sc); /* Init chip and driver */ sunscpal_reset_scsibus(sc); /* * Ask the adapter what subunits are present */ (void) config_found(&sc->sc_dev, &sc->sc_channel, scsiprint); scsipi_adapter_delref(&sc->sc_adapter); } int sunscpal_detach(sc, flags) struct sunscpal_softc *sc; int flags; { return (EOPNOTSUPP); } static void sunscpal_minphys(struct buf *bp) { if (bp->b_bcount > SUNSCPAL_MAX_DMA_LEN) { #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_DMA) { printf("sunscpal_minphys len = 0x%lx.\n", bp->b_bcount); Debugger(); } #endif bp->b_bcount = SUNSCPAL_MAX_DMA_LEN; } return (minphys(bp)); } #ifdef SUNSCPAL_USE_BUS_DMA /* * Allocate a DMA handle and put it in sr->sr_dma_hand. Prepare * for DMA transfer. */ static void sunscpal_dma_alloc(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; sunscpal_dma_handle_t dh; int i, xlen; u_long addr; #ifdef DIAGNOSTIC if (sr->sr_dma_hand != NULL) panic("sunscpal_dma_alloc: already have DMA handle"); #endif addr = (u_long) sc->sc_dataptr; xlen = sc->sc_datalen; /* If the DMA start addr is misaligned then do PIO */ if ((addr & 1) || (xlen & 1)) { printf("sunscpal_dma_alloc: misaligned.\n"); return; } /* Make sure our caller checked sc_min_dma_len. */ if (xlen < sc->sc_min_dma_len) panic("sunscpal_dma_alloc: xlen=0x%x", xlen); /* * Never attempt single transfers of more than 63k, because * our count register is only 16 bits. * This should never happen since already bounded by minphys(). * XXX - Should just segment these... */ if (xlen > SUNSCPAL_MAX_DMA_LEN) { printf("sunscpal_dma_alloc: excessive xlen=0x%x\n", xlen); Debugger(); sc->sc_datalen = xlen = SUNSCPAL_MAX_DMA_LEN; } /* Find free DMA handle. Guaranteed to find one since we have as many DMA handles as the driver has processes. */ for (i = 0; i < SUNSCPAL_OPENINGS; i++) { if ((sc->sc_dma_handles[i].dh_flags & SUNSCDH_BUSY) == 0) goto found; } panic("sc: no free DMA handles."); found: dh = &sc->sc_dma_handles[i]; dh->dh_flags = SUNSCDH_BUSY; dh->dh_mapaddr = (u_char*) addr; dh->dh_maplen = xlen; dh->dh_dvma = 0; /* Load the DMA map. */ if (bus_dmamap_load(sc->sunscpal_dmat, dh->dh_dmamap, dh->dh_mapaddr, dh->dh_maplen, NULL, BUS_DMA_NOWAIT) != 0) { /* Can't load map */ printf("sunscpal_dma_alloc: can't DMA %p/0x%x\n", dh->dh_mapaddr, dh->dh_maplen); dh->dh_flags = 0; return; } /* success */ sr->sr_dma_hand = dh; return; } static void sunscpal_dma_free(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; sunscpal_dma_handle_t dh = sr->sr_dma_hand; #ifdef DIAGNOSTIC if (dh == NULL) panic("sunscpal_dma_free: no DMA handle"); #endif if (sc->sc_state & SUNSCPAL_DOINGDMA) panic("sunscpal_dma_free: free while in progress"); if (dh->dh_flags & SUNSCDH_BUSY) { /* XXX - Should separate allocation and mapping. */ /* Give back the DVMA space. */ bus_dmamap_unload(sc->sunscpal_dmat, dh->dh_dmamap); dh->dh_flags = 0; } sr->sr_dma_hand = NULL; } /* * This function is called during the SELECT phase that * precedes a COMMAND phase, in case we need to setup the * DMA engine before the bus enters a DATA phase. * * On the sc version, setup the start address and the count. */ static void sunscpal_dma_setup(sc) struct sunscpal_softc *sc; { struct sunscpal_req *sr = sc->sc_current; struct scsipi_xfer *xs = sr->sr_xs; sunscpal_dma_handle_t dh = sr->sr_dma_hand; long data_pa; int xlen; /* * Get the DVMA mapping for this segment. * XXX - Should separate allocation and mapin. */ data_pa = dh->dh_dvma; data_pa += (sc->sc_dataptr - dh->dh_mapaddr); if (data_pa & 1) panic("sunscpal_dma_setup: bad pa=0x%lx", data_pa); xlen = sc->sc_datalen; if (xlen & 1) panic("sunscpal_dma_setup: bad xlen=0x%x", xlen); sc->sc_reqlen = xlen; /* XXX: or less? */ #ifdef SUNSCPAL_DEBUG if (sunscpal_debug & SUNSCPAL_DBG_DMA) { printf("sunscpal_dma_setup: dh=%p, pa=0x%lx, xlen=0x%x\n", dh, data_pa, xlen); } #endif /* sync the DMA map: */ bus_dmamap_sync(sc->sunscpal_dmat, dh->dh_dmamap, 0, dh->dh_maplen, ((xs->xs_control & XS_CTL_DATA_OUT) == 0 ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); /* Load the start address and the count. */ SUNSCPAL_WRITE_2(sc, sunscpal_dma_addr_h, (data_pa >> 16) & 0xFFFF); SUNSCPAL_WRITE_2(sc, sunscpal_dma_addr_l, (data_pa >> 0) & 0xFFFF); SUNSCPAL_WRITE_2(sc, sunscpal_dma_count, SUNSCPAL_DMA_COUNT_FLIP(xlen)); } #endif /* SUNSCPAL_USE_BUS_DMA */