/* $NetBSD: vrpmu.c,v 1.18 2005/12/11 12:17:35 christos Exp $ */ /* * Copyright (c) 1999 M. Warner Losh. All rights reserved. * Copyright (c) 2000 SATO Kazumi. All rights reserved. * Copyright (c) 1999,2000 PocketBSD Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: vrpmu.c,v 1.18 2005/12/11 12:17:35 christos Exp $"); #include #include #include #include #include #include #include #include #include #include "vrbcu.h" #if NVRBCU > 0 #include #include #endif #ifdef VRPMUDEBUG #define DEBUG_BOOT 0x1 /* boot time */ #define DEBUG_INTR 0x2 /* intr */ #define DEBUG_IO 0x4 /* I/O */ #ifndef VRPMUDEBUG_CONF #define VRPMUDEBUG_CONF 0 #endif /* VRPMUDEBUG_CONF */ int vrpmudebug = VRPMUDEBUG_CONF; #define DPRINTF(flag, arg) if (vrpmudebug&flag) printf arg; #define DDUMP_INTR2(flag, arg1, arg2) \ if (vrpmudebug&flag) vrpmu_dump_intr2(arg1,arg2); #define DDUMP_REGS(flag, arg) if (vrpmudebug&flag) vrpmu_dump_regs(arg); #else /* VRPMUDEBUG */ #define DPRINTF(flag, arg) #define DDUMP_INTR2(flag, arg1, arg2) #define DDUMP_REGS(flag, arg) #endif /* VRPMUDEBUG */ static int vrpmumatch(struct device *, struct cfdata *, void *); static void vrpmuattach(struct device *, struct device *, void *); static void vrpmu_write(struct vrpmu_softc *, int, unsigned short); static unsigned short vrpmu_read(struct vrpmu_softc *, int); int vrpmu_intr(void *); void vrpmu_dump_intr(void *); void vrpmu_dump_intr2(unsigned int, unsigned int); void vrpmu_dump_regs(void *); CFATTACH_DECL(vrpmu, sizeof(struct vrpmu_softc), vrpmumatch, vrpmuattach, NULL, NULL); struct vrpmu_softc *this_pmu; static inline void vrpmu_write(struct vrpmu_softc *sc, int port, unsigned short val) { bus_space_write_2(sc->sc_iot, sc->sc_ioh, port, val); } static inline unsigned short vrpmu_read(struct vrpmu_softc *sc, int port) { return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, port)); } static int vrpmumatch(struct device *parent, struct cfdata *cf, void *aux) { return (1); } static void vrpmuattach(struct device *parent, struct device *self, void *aux) { struct vrpmu_softc *sc = (struct vrpmu_softc *)self; struct vrip_attach_args *va = aux; #if NVRBCU > 0 int cpuid; #endif /* NVRBCU > 0 */ bus_space_tag_t iot = va->va_iot; bus_space_handle_t ioh; if (bus_space_map(iot, va->va_addr, 1, 0, &ioh)) { printf(": can't map bus space\n"); return; } sc->sc_iot = iot; sc->sc_ioh = ioh; if (!(sc->sc_handler = vrip_intr_establish(va->va_vc, va->va_unit, 0, IPL_TTY, vrpmu_intr, sc))) { printf (": can't map interrupt line.\n"); return; } if (!vrip_intr_establish(va->va_vc, va->va_unit, 1, IPL_TTY, vrpmu_intr, sc)) { printf (": can't map interrupt line.\n"); return; } printf("\n"); /* dump current intrrupt states */ vrpmu_dump_intr(sc); DDUMP_REGS(DEBUG_BOOT, sc); /* clear interrupt status */ vrpmu_write(sc, PMUINT_REG_W, PMUINT_ALL); vrpmu_write(sc, PMUINT2_REG_W, PMUINT2_ALL); #if NVRBCU > 0 cpuid = vrbcu_vrip_getcpuid(); if (cpuid >= BCUREVID_RID_4111){ vrpmu_write(sc, PMUWAIT_REG_W, PMUWAIT_DEFAULT); } #endif /* NVRBCU */ this_pmu = sc; } /* * dump PMU intr status regs * */ void vrpmu_dump_intr(void *arg) { struct vrpmu_softc *sc = arg; unsigned int intstat1; unsigned int intstat2; intstat1 = vrpmu_read(sc, PMUINT_REG_W); intstat2 = vrpmu_read(sc, PMUINT2_REG_W); vrpmu_dump_intr2(intstat1, intstat2); } /* * dump PMU intr status regs */ void vrpmu_dump_intr2(unsigned int intstat1, unsigned int intstat2) { if (intstat1 & PMUINT_GPIO3) printf("vrpmu: GPIO[3] activation\n"); if (intstat1 & PMUINT_GPIO2) printf("vrpmu: GPIO[2] activation\n"); if (intstat1 & PMUINT_GPIO1) printf("vrpmu: GPIO[1] activation\n"); if (intstat1 & PMUINT_GPIO0) printf("vrpmu: GPIO[0] activation\n"); if (intstat1 & PMUINT_RTC) printf("vrpmu: RTC alarm detected\n"); if (intstat1 & PMUINT_BATT) printf("vrpmu: Battery low during activation\n"); if (intstat1 & PMUINT_TIMOUTRST) printf("vrpmu: HAL timer reset\n"); if (intstat1 & PMUINT_RTCRST) printf("vrpmu: RTC reset detected\n"); if (intstat1 & PMUINT_RSTSWRST) printf("vrpmu: RESET switch detected\n"); if (intstat1 & PMUINT_DMSWRST) printf("vrpmu: Deadman's switch detected\n"); if (intstat1 & PMUINT_BATTINTR) printf("vrpmu: Battery low during normal ops\n"); if (intstat1 & PMUINT_POWERSW) printf("vrpmu: POWER switch detected\n"); if (intstat2 & PMUINT_GPIO12) printf("vrpmu: GPIO[12] activation\n"); if (intstat2 & PMUINT_GPIO11) printf("vrpmu: GPIO[11] activation\n"); if (intstat2 & PMUINT_GPIO10) printf("vrpmu: GPIO[10] activation\n"); if (intstat2 & PMUINT_GPIO9) printf("vrpmu: GPIO[9] activation\n"); } /* * dump PMU registers * */ void vrpmu_dump_regs(void *arg) { struct vrpmu_softc *sc = arg; unsigned int intstat1; unsigned int intstat2; unsigned int reg; #if NVRBCU > 0 int cpuid; #endif intstat1 = vrpmu_read(sc, PMUINT_REG_W); intstat2 = vrpmu_read(sc, PMUINT2_REG_W); /* others? XXXX */ reg = vrpmu_read(sc, PMUCNT_REG_W); printf("vrpmu: cnt 0x%x: ", reg); dbg_bit_print(reg); reg = vrpmu_read(sc, PMUCNT2_REG_W); printf("vrpmu: cnt2 0x%x: ", reg); dbg_bit_print(reg); #if NVRBCU > 0 cpuid = vrbcu_vrip_getcpuid(); if (cpuid >= BCUREVID_RID_4111){ reg = vrpmu_read(sc, PMUWAIT_REG_W); printf("vrpmu: wait 0x%x", reg); } if (cpuid >= BCUREVID_RID_4121){ reg = vrpmu_read(sc, PMUDIV_REG_W); printf(" div 0x%x", reg); } printf("\n"); #endif /* NVRBCU > 0 */ } /* * PMU interrupt handler. * XXX * * In the following interrupt routine we should actually DO something * with the knowledge that we've gained. For now we just report it. */ int vrpmu_intr(void *arg) { struct vrpmu_softc *sc = arg; unsigned int intstat1; unsigned int intstat2; intstat1 = vrpmu_read(sc, PMUINT_REG_W); /* clear interrupt status */ vrpmu_write(sc, PMUINT_REG_W, intstat1); intstat2 = vrpmu_read(sc, PMUINT2_REG_W); /* clear interrupt status */ vrpmu_write(sc, PMUINT2_REG_W, intstat2); DDUMP_INTR2(DEBUG_INTR, intstat1, intstat2); if (intstat1 & PMUINT_GPIO3) ; if (intstat1 & PMUINT_GPIO2) ; if (intstat1 & PMUINT_GPIO1) ; if (intstat1 & PMUINT_GPIO0) ; if (intstat1 & PMUINT_RTC) ; if (intstat1 & PMUINT_BATT) config_hook_call(CONFIG_HOOK_PMEVENT, CONFIG_HOOK_PMEVENT_SUSPENDREQ, NULL); if (intstat1 & PMUINT_TIMOUTRST) ; if (intstat1 & PMUINT_RTCRST) ; if (intstat1 & PMUINT_RSTSWRST) ; if (intstat1 & PMUINT_DMSWRST) ; if (intstat1 & PMUINT_BATTINTR) config_hook_call(CONFIG_HOOK_PMEVENT, CONFIG_HOOK_PMEVENT_SUSPENDREQ, NULL); if (intstat1 & PMUINT_POWERSW) { /* * you can't detect when the button is released */ config_hook_call(CONFIG_HOOK_BUTTONEVENT, CONFIG_HOOK_BUTTONEVENT_POWER, (void*)1 /* on */); config_hook_call(CONFIG_HOOK_BUTTONEVENT, CONFIG_HOOK_BUTTONEVENT_POWER, (void*)0 /* off */); } if (intstat2 & PMUINT_GPIO12) ; if (intstat2 & PMUINT_GPIO11) ; if (intstat2 & PMUINT_GPIO10) ; if (intstat2 & PMUINT_GPIO9) ; return (0); }