# $NetBSD: GENERIC,v 1.177 2002/04/12 08:10:49 gmcgarry Exp $ # # GENERIC machine description file # # This machine description file is used to generate the default NetBSD # kernel. The generic kernel does not include all options, subsystems # and device drivers, but should be useful for most applications. # # The machine description file can be customised for your specific # machine to reduce the kernel size and improve its performance. # # For further information on compiling NetBSD kernels, see the config(8) # man page. # # For further information on hardware support for this architecture, see # the intro(4) man page. For further information about kernel options # for this architecture, see the options(4) man page. For an explanation # of each device driver in this file see the section 4 man page for the # device. # #if 0 # GENERIC Amiga or DraCo # # This configuration file contains all possible options # # make AMIGA extracts the AMIGA configuration file. # make DRACO extracts the DRACO configuration file. # make INSTALL extracts the INSTALL configuration file. # # commit them, too. #endif # include "arch/amiga/conf/std.amiga" #ident "GENERIC-$Revision: 1.177 $" #ifdef INSTALL_CONFIGURATION makeoptions COPTS="-Os" #endif maxusers 8 options RTC_OFFSET=0 # # mainboards to support (in addition to Amiga) # #ifdef DRACO_CONFIGURATION options DRACO #endif #ifdef AMIGA_CONFIGURATION options BB060STUPIDROM # You need this, if you have a non-DraCo # MC68060 with an OS ROM up to (at least) # V40 (OS3.1) and want to boot with the # bootblock. # You do not need this if you have a DraCo, # have no 68060 or NEVER use the bootblock options P5PPC68KBOARD # Phase5 PPC/68K board support #endif # # processors this kernel should support # options M68060 # support for 060 options M060SP # MC68060 software support (Required for 060) #ifdef AMIGA_CONFIGURATION options M68040 # support for 040 options FPSP # MC68040 floating point support options M68030 # support for 030 options M68020 # support for 020/851 options FPU_EMULATE # FPU emulation #endif # # Networking options # options INET # IP networking support (Required) options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) #options IPSEC_DEBUG # debug for IP security #options GATEWAY # Packet forwarding #options DIRECTED_BROADCAST # Broadcast across subnets #ifndef INSTALL_CONFIGURATION #options MROUTING # Multicast routing options NS # XNS #options NSIP # XNS tunneling over IP options ISO,TPIP # OSI #options EON # OSI tunneling over IP options CCITT,LLC,HDLC # X.25 options NETATALK # AppleTalk networking protocols #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG #endif options PPP_BSDCOMP # BSD-Compress compression support for PPP options PPP_DEFLATE # Deflate compression support for PPP options PPP_FILTER # Active filter support for PPP (requires bpf) options PFIL_HOOKS # pfil(9) packet filter hooks options IPFILTER_LOG # ipmon(8) log support # Filesystems file-system FFS # Berkeley fast file system file-system EXT2FS # second extended file system (linux) #file-system LFS # log-structured filesystem (experimental) #ifndef INSTALL_CONFIGURATION file-system MFS # Memory based filesystem #endif file-system NFS # Network File System client side code file-system ADOSFS # AmigaDOS file system file-system CD9660 # ISO 9660 + Rock Ridge filesystem file-system MSDOSFS # MS-DOS filesystem file-system KERNFS # kernel data-structure filesystem #ifndef INSTALL_CONFIGURATION file-system FDESC # user file descriptor filesystem file-system NULLFS # loopback filesystem file-system OVERLAY # overlay filesystem #file-system PORTAL # Portal filesystem file-system PROCFS # /proc filesystem file-system UMAPFS # NULLFS + uid and gid remapping file-system UNION # union filesystem #endif # Filesystem options #options FFS_EI # FFS Endian Independant support #ifndef INSTALL_CONFIGURATION options QUOTA # User and group quotas in FFS options SOFTDEP # FFS soft updates support. options NFSSERVER # Network File System server side code #endif #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. # # Compatibility options for various existing systems # #ifndef INSTALL_CONFIGURATION #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. options COMPAT_43 # compatibility with 4.3BSD interfaces options COMPAT_09 # compatibility with NetBSD 0.9 options COMPAT_10 # compatibility with NetBSD 1.0 options COMPAT_12 # compatibility with NetBSD 1.2 options COMPAT_13 # compatibility with NetBSD 1.3 options COMPAT_14 # compatibility with NetBSD 1.4 options COMPAT_SUNOS # Support to run Sun (m68k) executables options COMPAT_SVR4 # Support to run SVR4 (m68k) executables options COMPAT_NOMID # allow nonvalid machine id executables #options COMPAT_LINUX # Support to run Linux/m68k executables #endif options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) options COMPAT_AOUT_M68K # actually make some system calls work. #ifndef INSTALL_CONFIGURATION # # Support for System V IPC facilities. # options SYSVSHM # System V-like shared memory options SYSVMSG # System V-like messages options SYSVSEM # System V-like semaphores #options SEMMNI=10 # number of semaphore identifiers #options SEMMNS=60 # number of semaphores in system #options SEMUME=10 # max number of undo entries per process #options SEMMNU=30 # number of undo structures in system #endif # # Support for various kernel options # #ifndef INSTALL_CONFIGURATION options KTRACE # system call tracing support options LKM # Loadable kernel modules options UCONSOLE # anyone can redirect a virtual console #endif #options INSECURE # disable kernel security levels options SCSIVERBOSE # human readable SCSI error messages #options USERCONF # userconf(4) support #ifndef INSTALL_CONFIGURATION options NTP # NTP phase/frequency locked loop #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #else options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #endif # # Misc. debugging options # options DDB # Kernel debugger #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB options DIAGNOSTIC # Extra kernel sanity checks #options DEBUG # Enable misc. kernel debugging code #options SYSCALL_DEBUG # debug all syscalls. #options SCSIDEBUG # Add SCSI debugging statements #options PANICBUTTON # Forced crash via keypress (???) # # Amiga specific options # #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the # first bank of RAM. (default: unlimited) #options NKPTADD=4 # set this for 4 additional KPT pages #options NKPTADDSHIFT=24 # set this for 1 additional KPT page # per 16 MB (1<<24 bytes) of RAM # uncomment and decrease this, or uncomment and # increase NKPTADD if you get "out of PT pages" # panics. # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete # before the 10 secondinterval ends, or that KBDRESET does work at all. #options KBDRESET # sync on Ctrl-Amiga-Amiga # These options improve performance with the built-in serial port # on slower Amigas. Try the larger buffers first then lev6_defer. #options SERIBUF_SIZE=4096 #options SEROBUF_SIZE=32 #options LEV6_DEFER # defers l6 to l4 (below serial l5) options RETINACONSOLE # enable code to allow retina to be console #ifdef AMIGA_CONFIGURATION options ULOWELLCONSOLE # enable code to allow a2410 to be console options CL5426CONSOLE # Cirrus console options CV64CONSOLE # CyberVision console options TSENGCONSOLE # Tseng console options CV3DCONSOLE # CyberVision 64/3D console #endif #ifdef AMIGA_CONFIGURATION options GRF_ECS # Enhanced Chip Set options GRF_NTSC # NTSC options GRF_PAL # PAL options GRF_A2024 # Support for the A2024 options GRF_AGA # AGA Chip Set options GRF_AGA_VGA # AGA VGAONLY timing options GRF_SUPER72 # AGA Super-72 #endif #options KFONT_8X11 # 8x11 font # This is how you would tell the kernel the A2410 oscillator frequencies: # The used frequencies are the defaults, and do not need option setting #options ULOWELL_OSC1=36000000 #options ULOWELL_OSC2=66667000 # This is how you specify the blitting speed, higher values may speed up blits # a littel bit. If you raise this value too much some trash may appear. # the commented version is the default. #options RH_MEMCLK=61000000 # this option enables the 64 bit sprite which does not work # for quite a few people. E.g. The cursor sprite will turn to a block # when moved to the top of the screen in X. #options RH_64BIT_SPRITE # enables fast scroll code appears to now work on 040 systems. #options RETINA_SPEED_HACK # enables the Hardwarecursor which does not work on some systems. #options RH_HARDWARECURSOR #ifdef AMIGA_CONFIGURATION # wscons aware interface to amiga custom chips. # If you enable it enable also wskbd. # #amidisplaycc0 at mainbus0 # wscons interface to custom chips #wsdisplay0 at amidisplaycc0 console ? #options WSEMUL_VT100 #options FONT_BOLD8x16 #options FONT_VT220L8x10 #endif #ifdef AMIGA_CONFIGURATION grfcc0 at mainbus0 # custom chips grfrt0 at zbus0 # retina II #endif grfrh0 at zbus0 # retina III #ifdef AMIGA_CONFIGURATION grfcl* at zbus0 # Picasso II/Piccalo/Spectrum grful0 at zbus0 # A2410 grfcv0 at zbus0 # CyberVision 64 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) grfcv3d0 at zbus0 # CyberVision 64/3D #endif #ifdef AMIGA_CONFIGURATION grf0 at grfcc0 grf1 at grfrt0 #endif grf2 at grfrh0 #ifdef AMIGA_CONFIGURATION grf3 at grfcl? grf4 at grful0 grf5 at grfcv0 grf6 at grfet? grf7 at grfcv3d0 #endif #ifdef AMIGA_CONFIGURATION ite0 at grf0 # terminal emulators for grfs ite1 at grf1 # terminal emulators for grfs #endif ite2 at grf2 # terminal emulators for grfs #ifdef AMIGA_CONFIGURATION ite3 at grf3 # terminal emulators for grfs ite4 at grf4 # terminal emulators for grfs ite5 at grf5 # terminal emulators for grfs ite6 at grf6 # terminal emulators for grfs ite7 at grf7 # terminal emulators for grfs #endif msc0 at zbus0 # A2232 MSC multiport serial. mfc0 at zbus0 # MultiFaceCard I/O board mfcs0 at mfc0 unit 0 # MFC serial mfcs1 at mfc0 unit 1 # MFC serial #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] #mfc1 at zbus0 # MultiFaceCard 2nd I/O board #mfcs2 at mfc1 unit 0 #mfcs3 at mfc1 unit 1 #mfcp1 at mfc1 unit 0 hyper* at zbus? # zbus HyperCom3/3+/4/4+ #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 com* at hyper? port ? # Hypercom3/4 serial ports lpt* at hyper? port ? # Hypercom3+/4+ parallel port #options IOBZCLOCK=22118400 # default, uncomment the next line #options IOBZCLOCK=24000000 # if needed. iobl* at zbus? # zbus IOBlix com* at iobl? port ? # IOBlix serial ports lpt* at iobl? port ? # IOBlix parallel ports # # Keyboard device. Optionally can attach a wskbd. # wskbd works together with a wsdisplay so enable them both if you will. # Don't enable wskbd if you use ite. # # XXX in std.amiga: kbd0 at mainbus0 #wskbd0 at kbd0 console ? #ifdef AMIGA_CONFIGURATION # # Amiga Mainboard devices (sans graphics and keyboard) # ser0 at mainbus0 # Amiga onboard serial par0 at mainbus0 # Amiga onboard parallel ms* at mainbus0 # Amiga mice fdc0 at mainbus0 # Amiga FDC fd* at fdc0 unit ? # floppy disks on the later a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock a2kbbc0 at mainbus0 # A2000 battery backed clock #ifndef INSTALL_CONFIGURATION aucc* at mainbus0 # Amiga CC audio audio* at aucc? #endif #endif #ifdef DRACO_CONFIGURATION # # DraCo Mainboard devices (sans keyboard) # drbbc0 at mainbus0 # DraCo battery backed clock drsupio0 at mainbus0 # DraCo superio chip com* at drsupio? port ? # DraCo serial lpt0 at drsupio? port ? # DraCo parallel #endif # # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) # #ifndef INSTALL_CONFIGURATION #ifndef DRACO_CONFIGURATION # Alas, Melody-Z2 dont configure in the DraCo bus. melody* at zbus0 # Melody MPEG audio decoder audio* at melody? #endif repulse* at zbus0 # ALiENDESiGN Repulse audio* at repulse? toccata* at zbus0 # MacroSystem GmbH Toccata audio* at toccata? #endif # Ethernet cards: le* at zbus0 # A2065, Ameristar, Ariadne ne* at zbus0 # AriadneII, X-surf ed* at zbus0 # Hydra, ASDG LanRover es* at zbus0 # CEI A4066 EthernetPLUS qn* at zbus0 # Quicknet # Arcnet bah* at zbus0 # C=/Ameristar A2060 / 560 #ifdef AMIGA_CONFIGURATION # Greater Valley Product Bus gvpbus* at zbus0 # scsi stuff, all possible gtsc0 at gvpbus? # GVP series II scsi scsibus* at gtsc0 ahsc0 at mainbus0 # A3000 scsi scsibus* at ahsc0 atzsc0 at zbus0 # A2091 scsi scsibus* at atzsc0 wstsc0 at zbus0 # Wordsync II scsi scsibus* at wstsc0 ivsc0 at zbus0 # IVS scsi scsibus* at ivsc0 mlhsc0 at zbus0 # Hacker scsi scsibus* at mlhsc0 otgsc0 at zbus0 # 12 gauge scsi scsibus* at otgsc0 zssc0 at zbus0 # Zeus scsi scsibus* at zssc0 mgnsc0 at zbus0 # Magnum scsi scsibus* at mgnsc0 wesc0 at zbus0 # Warp Engine scsi scsibus* at wesc0 afsc0 at zbus0 # A4091 scsi scsibus* at afsc0 aftsc0 at mainbus0 # A4000T scsi scsibus* at aftsc0 flsc0 at zbus0 # FastlaneZ3 scsi scsibus* at flsc0 bzsc0 at zbus0 # Blizzard 1230 I,II scsi scsibus* at bzsc0 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi scsibus* at bzivsc0 bztzsc0 at zbus0 # Blizzard 2060 scsi scsibus* at bztzsc0 cbsc0 at zbus0 # CyberSCSI I scsibus* at cbsc0 cbiisc0 at zbus0 # CyberSCSI II scsibus* at cbiisc0 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI scsibus* at cbiiisc0 empsc0 at zbus0 # Emplant scsi scsibus* at empsc0 #idesc0 at mainbus0 # A4000 & A1200 IDE #scsibus* at idesc0 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> # <<< are uncommented >>> wdc0 at mainbus0 # A4000 & A1200 IDE bus wd* at wdc? drive ? # + drives atapibus* at wdc? channel ? # ATAPI bus cd* at atapibus? drive ? # ATAPI CD-ROM drives sd* at atapibus? drive ? # ATAPI disk drives pccard0 at mainbus0 pcmcia* at pccard0 com* at pcmcia? function ? # Modems and serial cards pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards aic* at pcmcia? function ? # Adaptec APA-1460 SCSI wdc* at pcmcia? function ? awi* at pcmcia? function ? # BayStack 650 (802.11FH) ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet mbe* at pcmcia? function ? # MB8696x based Ethernet ne* at pcmcia? function ? # NE2000-compatible Ethernet sm* at pcmcia? function ? # Megahertz Ethernet mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards com* at mhzc? sm* at mhzc? #endif #ifdef DRACO_CONFIGURATION drsc0 at mainbus0 # DraCo scsi scsibus* at drsc0 #endif # each hard drive from low target to high # will configure to the next available sd unit number sd* at scsibus? target ? lun ? # scsi disks st* at scsibus? target ? lun ? # scsi tapes cd* at scsibus? target ? lun ? # scsi cds ch* at scsibus? target ? lun ? # scsi autochangers #ifndef INSTALL_CONFIGURATION ss* at scsibus? target ? lun ? # scsi scanner uk* at scsibus? target ? lun ? # scsi unknown #endif pseudo-device loop # loopback network interface pseudo-device sl 1 # SLIP network interfaces pseudo-device ppp 1 # PPP network interfaces pseudo-device pppoe # PPP over Ethernet (RFC 2516) pseudo-device tun 1 # network tunnel line discipline #pseudo-device gre 2 # generic L3 over IP tunnel pseudo-device bpfilter 16 # Berkeley packet filter pseudo-device ipfilter # IP Filter package pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith 1 # IPv[46] tcp relay translation i/f #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation pseudo-device vlan # IEEE 802.1q encapsulation pseudo-device bridge # simple inter-network bridging pseudo-device view 4 # views (needed for grfcc) pseudo-device pty # pseudo-terminals pseudo-device vnd 4 # vnode pseudo-disks pseudo-device ccd 4 # concatenated disk devices pseudo-device raid 8 # RAIDframe disk driver options RAID_AUTOCONFIG # auto-configuration of RAID components # Options to enable various other RAIDframe RAID types. # options RF_INCLUDE_EVENODD=1 # options RF_INCLUDE_RAID5_RS=1 # options RF_INCLUDE_PARITYLOGGING=1 # options RF_INCLUDE_CHAINDECLUSTER=1 # options RF_INCLUDE_INTERDECLUSTER=1 # options RF_INCLUDE_PARITY_DECLUSTERING=1 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM # use "com" randomness as well (BROKEN) config netbsd root on ? type ?