/* $NetBSD: scn.c,v 1.36 1997/03/13 10:24:14 matthias Exp $ */ /* * Copyright (c) 1996, 1997 Philip L. Budne. * Copyright (c) 1993 Philip A. Nelson. * Copyright (c) 1991, 1992, 1993 * The Regents of the University of California. All rights reserved. * * Portions of this software were developed by the Computer Systems * Engineering group at Lawrence Berkeley Laboratory under DARPA * contract BG 91-66 and contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)com.c 7.5 (Berkeley) 5/16/91 */ #include "scn.h" #if NSCN > 0 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scnreg.h" #include "scnvar.h" int scn_soft_rts = 1; static const char scnints[4] = {IR_TTY0, IR_TTY1, IR_TTY2, IR_TTY3}; static const char rxints[4] = {IR_TTY0RDY, IR_TTY1RDY, IR_TTY2RDY, IR_TTY3RDY}; int scnprobe __P((struct device *, struct cfdata *, void *)); void scnattach __P((struct device *, struct device *, void *)); int scnparam __P((struct tty *, struct termios *)); void scnstart __P((struct tty *)); int scnopen __P((dev_t, int, int, struct proc *)); int scnclose __P((dev_t, int, int, struct proc *)); int scncnprobe __P((struct consdev *)); void scncninit __P((struct consdev *)); int scncngetc __P((dev_t)); void scncnputc __P((dev_t, int)); void scncnpollc __P((dev_t, int)); int scninit __P((dev_t, int)); void scncnreinit __P((void *)); int scnhwiflow __P((struct tty *, int)); struct cfattach scn_ca = {sizeof(struct scn_softc), scnprobe, scnattach}; struct cfdriver scn_cd = {NULL, "scn", DV_TTY, NULL, 0}; #ifndef CONSOLE_SPEED #define CONSOLE_SPEED TTYDEF_SPEED #endif #ifndef SCNDEF_CFLAG #define SCNDEF_CFLAG TTYDEF_CFLAG #endif #ifdef CPU30MHZ #define RECOVER() __asm __volatile("bispsrw 0x800" : : : "cc") #else #define RECOVER() #endif int scnconsole = SCN_CONSOLE; int scndefaultrate = TTYDEF_SPEED; int scnconsrate = CONSOLE_SPEED; int scnmajor; #define SOFTC(UNIT) scn_cd.cd_devs[(UNIT)] static void scnintr __P((void *)); static void scnrxintr __P((void *)); static int scn_rxintr __P((struct scn_softc *, int)); static void scnsoft __P((void *)); static void scn_setchip __P((struct scn_softc *sc)); static int scniter __P((int *, int, int*, int*, struct chan *, int)); static int scn_config __P((int, int, int, u_char, u_char)); static int scnsir = -1; /* s/w intr number */ #define setsoftscn() softintr(scnsir) #ifdef SCN_TIMING /* * Keep timing info on latency of software interrupt used by * the ringbuf code to empty ring buffer. * "getinfo" program reads data from /dev/kemm. */ static struct timeval tstart; #define NJITTER 100 int scn_njitter = NJITTER; int scn_jitter[NJITTER]; #endif #define SCN_CLOCK 3686400 /* input clock */ /* speed table groups ACR[7] */ #define GRP_A 0 #define GRP_B ACR_BRG /* combo of MR0[2:0] and ACR[7] */ #define MODE0A MR0_MODE_0 #define MODE0B (MR0_MODE_0|ACR_BRG) #define MODE1A MR0_MODE_1 #define MODE1B (MR0_MODE_1|ACR_BRG) #define MODE2A MR0_MODE_2 #define MODE2B (MR0_MODE_2|ACR_BRG) #define ANYMODE -1 #define DEFMODE(C92) MODE0A /* use MODE4A if 26c92? */ /* speed code for Counter/Timer (all modes, groups) */ #define USE_CT 0xd /* * Rate table, ordered by speed, then mode. * NOTE: ordering of modes must be done carefully! */ struct tabent { int32_t speed; int16_t code; int16_t mode; } table[] = { { 50, 0x0, MODE0A }, { 75, 0x0, MODE0B }, { 110, 0x1, MODE0A }, { 110, 0x1, MODE0B }, { 110, 0x1, MODE1A }, { 110, 0x1, MODE1B }, { 134, 0x2, MODE0A }, /* 134.5 */ { 134, 0x2, MODE0B }, /* 134.5 */ { 134, 0x2, MODE1A }, /* 134.5 */ { 134, 0x2, MODE1B }, /* 134.5 */ { 150, 0x3, MODE0A }, { 150, 0x3, MODE0A }, { 200, 0x3, MODE0A }, { 300, 0x4, MODE0A }, { 300, 0x4, MODE0B }, { 300, 0x0, MODE1A }, { 450, 0x0, MODE1B }, { 600, 0x5, MODE0A }, { 600, 0x5, MODE0B }, { 880, 0x1, MODE2A }, { 880, 0x1, MODE2B }, { 900, 0x3, MODE1B }, { 1050, 0x7, MODE0A }, { 1050, 0x7, MODE1A }, { 1076, 0x2, MODE2A }, { 1076, 0x2, MODE2B }, { 1200, 0x6, MODE0A }, { 1200, 0x6, MODE0B }, { 1200, 0x3, MODE1A }, { 1800, 0xa, MODE0B }, { 1800, 0x4, MODE1A }, { 1800, 0x4, MODE1B }, { 2000, 0x7, MODE0B }, { 2000, 0x7, MODE1B }, { 2400, 0x8, MODE0A }, { 2400, 0x8, MODE0B }, { 3600, 0x5, MODE1A }, { 3600, 0x5, MODE1B }, { 4800, 0x9, MODE2A }, { 4800, 0x9, MODE2B }, { 4800, 0x9, MODE0A }, { 4800, 0x9, MODE0B }, { 7200, 0xa, MODE0A }, { 7200, 0x0, MODE2B }, { 7200, 0x6, MODE1A }, { 7200, 0x6, MODE1B }, { 9600, 0xb, MODE2A }, { 9600, 0xb, MODE2B }, { 9600, 0xb, MODE0A }, { 9600, 0xb, MODE0B }, { 9600, 0xd, MODE1A }, /* use C/T as entre' to mode1 */ { 9600, 0xd, MODE1B }, /* use C/T as entre' to mode1 */ { 14400, 0x3, MODE2B }, { 14400, 0x8, MODE1A }, { 14400, 0x8, MODE1B }, { 19200, 0x3, MODE2A }, { 19200, 0xc, MODE2B }, { 19200, 0xc, MODE0B }, { 19200, 0xd, MODE1A }, /* use C/T as entre' to mode1 */ { 19200, 0xd, MODE1B }, /* use C/T as entre' to mode1 */ { 28800, 0x4, MODE2A }, { 28800, 0x4, MODE2B }, { 28800, 0x9, MODE1A }, { 28800, 0x9, MODE1B }, { 38400, 0xc, MODE2A }, { 38400, 0xc, MODE0A }, { 57600, 0x5, MODE2A }, { 57600, 0x5, MODE2B }, { 57600, 0xb, MODE1A }, { 57600, 0xb, MODE1B }, { 115200, 0x6, MODE2A }, { 115200, 0x6, MODE2B }, { 115200, 0xc, MODE1B }, { 230400, 0xc, MODE1A } }; #define TABENTRIES (sizeof(table)/sizeof(table[0])) /* * boolean for speed codes which are identical in both A/B BRG groups * in all modes */ static u_char bothgroups[16] = { 0, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 1, 0, 1, 1, 1 }; /* * Manually constructed divisors table * for minimum error (from some of Dave Rand's code) */ const struct { u_int16_t speed; u_int16_t div; } divs[] = { { 50, 2303 }, /* 2304 is exact?? */ { 110, 1047 }, /* Should be 1047.27 */ { 134, 857 }, /* Should be 856.505576 */ { 1050, 110 }, /* Should be 109.7142857 */ { 2000, 57 } /* Should be 57.6 */ }; #define DIVS (sizeof(divs)/sizeof(divs[0])) /* * minor unit bit decode: * CxxxUUU * * C - carrier * 0 - delay open until carrier high * 1 - allow open with carrier low * UUU - unit 0-7 */ #define DEV_UNIT(x) (minor(x) & 0x7) #define DEV_DIALOUT(x) (minor(x) & 0x80) extern struct tty *constty; #ifdef KGDB extern int kgdb_dev; extern int kgdb_rate; extern int kgdb_debug_init; int scnkgdb = -1; #endif /* RS-232 configuration routines */ /* * set chip parameters, or mark for delayed change. * called at spltty() or on TxEMPTY interrupt. * * Reads current values to avoid glitches from redundant sets. * Perhaps should save last value set to avoid read/write? NOTE: * Would still need to do read if write not needed to advance MR * pointer. * * new 2/97 -plb */ static void scn_setchip(sc) struct scn_softc *sc; { struct duart *dp; u_char acr, csr, mr1, mr2; int chan; if (sc->sc_tty && (sc->sc_tty->t_state & TS_BUSY)) { sc->sc_heldchanges = 1; return; } chan = sc->sc_unit & 1; dp = sc->sc_duart; if (dp->type == SC26C92) { u_char nmr0a, mr0a; #if 0 /* input rate high enough so 64 bit time watchdog not onerous? */ if (dp->chan[chan].ispeed >= 1200) { /* set FIFO threshold at 6 */ dp->chan[chan].mr0 |= MR0_RXWD | MR0_RXINT; } else { dp->chan[chan].mr0 &= ~(MR0_RXWD | MR0_RXINT); } #endif /* select BRG mode (MR0A only) */ nmr0a = dp->chan[0].mr0 | (dp->mode & MR0_MODE); dp->base[CH_CR] = CR_CMD_MR0; RECOVER(); mr0a = dp->base[CH_MR]; if (mr0a != nmr0a) { dp->base[CH_CR] = CR_CMD_MR0; RECOVER(); dp->base[CH_MR] = nmr0a; } if (chan) { /* channel B? */ u_char mr0b; sc->sc_chbase[CH_CR] = CR_CMD_MR0; RECOVER(); mr0b = dp->base[CH_MR]; if (dp->chan[chan].mr0 != mr0b) { sc->sc_chbase[CH_CR] = CR_CMD_MR0; RECOVER(); sc->sc_chbase[CH_MR] = dp->chan[chan].mr0; } } } else { sc->sc_chbase[CH_CR] = CR_CMD_MR1; RECOVER(); } mr1 = sc->sc_chbase[CH_MR]; mr2 = sc->sc_chbase[CH_MR]; if (mr1 != dp->chan[chan].new_mr1 || mr2 != dp->chan[chan].new_mr2) { sc->sc_chbase[CH_CR] = CR_CMD_MR1; RECOVER(); sc->sc_chbase[CH_MR] = dp->chan[chan].new_mr1; sc->sc_chbase[CH_MR] = dp->chan[chan].new_mr2; } acr = dp->acr | (dp->mode & ACR_BRG); dp->base[DU_ACR] = acr; /* write-only reg! */ /* set speed codes */ csr = (dp->chan[chan].icode<<4) | dp->chan[chan].ocode; if (sc->sc_chbase[CH_CSR] != csr) { sc->sc_chbase[CH_CSR] = csr; } /* see if counter/timer in use */ if (dp->counter && (dp->chan[0].icode == USE_CT || dp->chan[0].ocode == USE_CT || dp->chan[1].icode == USE_CT || dp->chan[1].ocode == USE_CT)) { /* program counter/timer only if necessary */ if (dp->counter != dp->ocounter) { u_int16_t div; #ifdef DIVS int i; /* look for precalculated rate, for minimum error */ for (i = 0; i < DIVS && divs[i].speed <= dp->counter; i++) { if (divs[i].speed == dp->counter) { div = divs[i].div; goto found; } } #endif /* not found in table; calculate a value (rounding up) */ div = ((long)SCN_CLOCK/16/2 + dp->counter/2) / dp->counter; found: /* halt before loading? may ALWAYS glitch? * reload race may only sometimes glitch?? */ dp->base[DU_CTUR] = div >> 8; dp->base[DU_CTLR] = div & 255; if (dp->ocounter == 0) { /* not previously used? */ u_char temp; /* start C/T running */ temp = dp->base[DU_CSTRT]; } dp->ocounter = dp->counter; } } else { /* counter not in use; mark as free */ dp->counter = 0; } sc->sc_heldchanges = 0; /* * delay a tiny bit to try and avoid tx glitching. * I know we're at spltty(), but this is much better than the * old version used DELAY((96000 / out_speed) * 10000) * -plb */ DELAY(10); } /* * iterator function for speeds. * (could be called "findnextcode") * Returns sequence of possible speed codes for a given rate. * should set index to zero before first call. * * Could be implemented as a "checkspeed()" function called * to evaluate table entries, BUT this allows more variety in * use of C/T with fewer table entries. */ static int scniter(index, wanted, counter, mode, other, c92) int *index; /* IN/OUT: index */ int wanted; /* IN: speed wanted */ int *counter; /* IN/OUT: counter/timer rate */ int *mode; /* IN/OUT: mode */ struct chan *other; /* IN: other channel, or NULL */ int c92; /* IN: true for 26C92 */ { while (*index < TABENTRIES) { struct tabent *tp; tp = table + (*index)++; if (tp->speed != wanted) continue; /* if not a 26C92 only look at MODE0 entries */ if (!c92 && (tp->mode & MR0_MODE) != MR0_MODE_0) continue; /* * check mode; * OK if this table entry for current mode, or mode not * yet set, or other channel's rates are available in both * A and B groups. */ if (tp->mode == *mode || *mode == ANYMODE || (other != NULL && (tp->mode & MR0_MODE) == (*mode & MR0_MODE) && bothgroups[other->icode] && bothgroups[other->ocode])) { /* * for future table entries specifying * use of counter/timer */ if (tp->code == USE_CT) { if (*counter != wanted && *counter != 0) continue; /* counter busy */ *counter = wanted; } *mode = tp->mode; return tp->code; } } /* here after returning all applicable table entries */ /* XXX return sequence of USE_CT with all possible modes?? */ if ((*index)++ == TABENTRIES) { /* Max C/T rate (even on 26C92?) is 57600 */ if (wanted <= 57600 && (*counter == wanted || *counter == 0)) { *counter = wanted; return USE_CT; } } return -1; /* FAIL */ } /* * calculate configuration * rewritten 2/97 -plb */ static int scn_config(unit, ispeed, ospeed, mr1, mr2) int unit; int ispeed; /* input speed in bps */ int ospeed; /* output speed in bps */ u_char mr1; /* new bits for MR1 */ u_char mr2; /* new bits for MR2 */ { register struct scn_softc *sc; struct duart *dp; int chan; /* 0 or 1 */ int other; /* 1 or 0 */ int mode; int counter; int i, o; /* input, output iterator indexes */ int ic, oc; /* input, output codes */ struct chan *ocp; /* other duart channel */ struct tty *otp; /* other channel tty struct */ int c92; /* true if duart is sc26c92 */ int s; /* Set up softc pointer. */ if (unit >= scn_cd.cd_ndevs) return ENXIO; sc = SOFTC(unit); chan = unit & 1; other = chan ^ 1; dp = sc->sc_duart; ocp = &dp->chan[other]; c92 = (dp->type == SC26C92); /* ugh; keep tty pointers in duart.chan[n].tty? */ otp = NULL; if ((unit ^ 1) < scn_cd.cd_ndevs) { struct scn_softc *osc; osc = SOFTC(unit ^ 1); if (osc) { otp = osc->sc_tty; } } /* * Right now the first combination that works is used. * Perhaps it should search entire solution space for "best" * combination. For example, use heuristic weighting of mode * preferences, and use of counter timer? * * For example right now with 2681/2692 when default rate is * 9600 and other channel is closed setting 19200 will pick * mode 0a and use counter/timer. Better solution might be * mode 0b, leaving counter/timer free! * * When other channel is open might want to prefer * leaving counter timer free, or not flipping A/B group? */ if (otp && (otp->t_state & TS_ISOPEN)) { /* * Other channel open; * Find speed codes compatible with current mode/counter. */ i = 0; for (;;) { mode = dp->mode; counter = dp->counter; /* NOTE: pass other chan pointer to allow group flipping */ ic = scniter(&i, ispeed, &counter, &mode, ocp, c92); if (ic == -1) break; o = 0; if ((oc = scniter(&o, ospeed, &counter, &mode, NULL, c92)) != -1) { /* * take first match * * Perhaps calculate heuristic "score", * save score,codes,mode,counter if score * better than previous best? */ goto gotit; } } /* XXX try looping for ospeed? */ } else { /* other channel closed */ int oo, oi; /* other input, output iterators */ int oic, ooc; /* other input, output codes */ /* * Here when other channel closed. Finds first * combination that will allow other channel to be opened * (with defaults) and fits our needs. */ oi = 0; for (;;) { mode = ANYMODE; counter = 0; oic = scniter(&oi, ocp->ispeed, &counter, &mode, NULL, c92); if (oic == -1) break; oo = 0; while ((ooc = scniter(&oo, ocp->ospeed, &counter, &mode, NULL, c92)) != -1) { i = 0; while ((ic = scniter(&i, ispeed, &counter, &mode, NULL, c92)) != -1) { o = 0; if ((oc = scniter(&o, ospeed, &counter, &mode, NULL, c92)) != -1) { /* * take first match * * Perhaps calculate heuristic * "score", save * score,codes,mode,counter * if score better than * previous best? */ s = spltty(); dp->chan[other].icode = oic; dp->chan[other].ocode = ooc; goto gotit2; } } } } } return EINVAL; gotit: s = spltty(); gotit2: dp->chan[chan].new_mr1 = mr1; dp->chan[chan].new_mr2 = mr2; dp->chan[chan].ispeed = ispeed; dp->chan[chan].ospeed = ospeed; dp->chan[chan].icode = ic; dp->chan[chan].ocode = oc; if (mode == ANYMODE) /* no mode selected?? */ mode = DEFMODE(c92); dp->mode = mode; dp->counter = counter; scn_setchip(sc); /* set chip now, if possible */ splx(s); return (0); } int scnprobe(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct confargs *ca = aux; int unit = cf->cf_unit; int mr1; register volatile u_char *ch_base; /* The pc532 doesn't have more then 8 lines. */ if (unit >= 8) return(0); /* Now some black magic that should detect a scc26x2 channel. */ ch_base = (volatile u_char *) SCN_FIRST_MAP_ADR + CH_SZ * unit; ch_base[CH_CR] = CR_CMD_RESET_ERR; RECOVER(); ch_base[CH_CR] = CR_CMD_RESET_BRK; RECOVER(); ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); mr1 = ch_base[CH_MR] ^ 0x80; ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); ch_base[CH_MR] = mr1; ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); if (ch_base[CH_MR] != mr1) return(0); if (ch_base[CH_MR] == mr1) return(0); ca->ca_addr = (int)ch_base; if (unit & 1) ca->ca_irq = -1; else ca->ca_irq = scnints[unit >> 1] | (rxints[unit >> 1] << 4); return(1); } /* * No need to make scn_rx{en,dis}able too efficient, * they're only called on setup, open & close! */ static __inline void scn_rxenable(sc) struct scn_softc *sc; { struct duart *dp; int channel; dp = sc->sc_duart; channel = sc->sc_unit & 1; /* Outputs wire-ored and connected to ICU input for fast rx interrupt. */ if (channel == 0) dp->opcr |= OPCR_OP4_RXRDYA; else dp->opcr |= OPCR_OP5_RXRDYB; dp->base[DU_OPCR] = dp->opcr; } static __inline void scn_rxdisable(sc) struct scn_softc *sc; { struct duart *dp; int channel; dp = sc->sc_duart; channel = sc->sc_unit & 1; /* Outputs wire-ored and connected to ICU input for fast rx interrupt. */ if (channel == 0) dp->opcr &= ~OPCR_OP4_RXRDYA; else dp->opcr &= ~OPCR_OP5_RXRDYB; dp->base[DU_OPCR] = dp->opcr; } void scnattach(parent, self, aux) struct device *parent; struct device *self; void *aux; { struct confargs *ca = aux; register struct scn_softc *sc; register volatile u_char *ch_base; register volatile u_char *duart_base; long scn_first_adr; int channel; int speed; int s; u_char unit; u_char duart; u_char delim = ':'; enum scntype scntype; sc = (void *) self; unit = self->dv_unit; /* sc->sc_dev.dv_unit ??? */ duart = unit >> 1; /* get chip number */ channel = unit & 1; /* get channel on chip */ /* pick up "flags" (SCN_xxx) from config file */ if (self->dv_cfdata) /* paranoia */ sc->sc_swflags = ca->ca_flags; else sc->sc_swflags = 0; if (unit == scnconsole) /* console? */ sc->sc_swflags |= SCN_SW_SOFTCAR; /* ignore carrier */ /* * Precalculate port numbers for speed. * Magic numbers in the code (once). * * XXX get physical addr from "cfdata" (put there from config file) * and pass to a map_regs() routine which returns virtual (mapped) addr? */ scn_first_adr = SCN_FIRST_MAP_ADR; /* to get around a gcc bug. */ ch_base = (volatile u_char *) scn_first_adr + CH_SZ * unit; duart_base = (volatile u_char *) scn_first_adr + DUART_SZ * duart; if (channel == 0) { char *duart_type; /* Probe DUART type */ unsigned char mr1, mr2; s = spltty(); if(unit == scnconsole) { ch_base[CH_CR] = CR_DIS_TX; delay(5 * 10000); } ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); mr1 = ch_base[CH_MR]; mr2 = ch_base[CH_MR]; ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); ch_base[CH_MR] = 1; ch_base[CH_MR] = 0; ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); if (ch_base[CH_MR] == 1) { /* MR 2 selected */ ch_base[CH_CR] = CR_CMD_MR0; RECOVER(); /* if 2681, MR2 still selected */ ch_base[CH_MR] = 1; ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); ch_base[CH_MR] = 0; /* MR1 */ ch_base[CH_MR] = 0; /* MR2 */ ch_base[CH_CR] = CR_CMD_MR0; RECOVER(); /* if 2681, MR2 still selected */ if((ch_base[CH_MR] & 1) == 1) { duart_type = "sc26c92"; scntype = SC26C92; } else { /* 2681 treats as MR1 Select */ ch_base[CH_CR] = CR_CMD_RTS_OFF; RECOVER(); ch_base[CH_MR] = 1; ch_base[CH_MR] = 0; ch_base[CH_CR] = CR_CMD_RTS_OFF; RECOVER(); if (ch_base[CH_MR] == 1) { duart_type = "scn2681"; scntype = SCN2681; } else { duart_type = "scn2692"; scntype = SCN2692; } } } else { duart_type = "Unknown"; scntype = SCNUNK; } /* If a 2681, the CR_CMD_MR0 is interpreted as a TX_RESET */ if(unit == scnconsole) { ch_base[CH_CR] = CR_ENA_TX; RECOVER(); } ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); ch_base[CH_MR] = mr1; ch_base[CH_MR] = mr2; splx(s); /* Arg 0 is special, so we must pass "unit + 1" */ intr_establish(scnints[duart], scnintr, (void *) (unit + 1), "scn", IPL_TTY, IPL_ZERO, LOW_LEVEL); printf("%c %s", delim, duart_type); delim = ','; /* * IPL_ZERO is the right priority for the rx interrupt. * Only splhigh() should disable rxints. */ intr_establish(rxints[duart], scnrxintr, (void *) (unit + 1), "scnrx", IPL_ZERO, IPL_RTTY, LOW_LEVEL); } /* Record unit number, uart */ sc->sc_unit = unit; sc->sc_chbase = ch_base; /* Initialize modem/interrupt bit masks */ if (channel == 0) { sc->sc_duart = malloc(sizeof(struct duart), M_DEVBUF, M_NOWAIT); if (sc->sc_duart == NULL) panic("scn%d: memory allocation for duart structure failed", unit); sc->sc_duart->base = duart_base; sc->sc_duart->type = scntype; sc->sc_op_rts = OP_RTSA; sc->sc_op_dtr = OP_DTRA; sc->sc_ip_cts = IP_CTSA; sc->sc_ip_dcd = IP_DCDA; sc->sc_tx_int = INT_TXA; } else { sc->sc_duart = ((struct scn_softc *)SOFTC(unit - 1))->sc_duart; sc->sc_op_rts = OP_RTSB; sc->sc_op_dtr = OP_DTRB; sc->sc_ip_cts = IP_CTSB; sc->sc_ip_dcd = IP_DCDB; sc->sc_tx_int = INT_TXB; } /* Initialize counters */ sc->sc_framing_errors = 0; sc->sc_fifo_overruns = 0; sc->sc_parity_errors = 0; sc->sc_breaks = 0; if (unit == scnconsole) { DELAY(5 * 10000); /* Let the output go out.... */ } /* * Set up the hardware to a base state, in particular: * o reset transmitter and receiver * o set speeds and configurations * o receiver interrupts only (RxRDY and BREAK) */ s = spltty(); /* RTS off... */ SCN_OP_BIC(sc, sc->sc_op_rts); /* "istop" */ ch_base[CH_CR] = CR_DIS_RX | CR_DIS_TX; RECOVER(); ch_base[CH_CR] = CR_CMD_RESET_RX; RECOVER(); ch_base[CH_CR] = CR_CMD_RESET_TX; RECOVER(); ch_base[CH_CR] = CR_CMD_RESET_ERR; RECOVER(); ch_base[CH_CR] = CR_CMD_RESET_BRK; RECOVER(); ch_base[CH_CR] = CR_CMD_MR1; RECOVER(); /* No receiver control of RTS. */ ch_base[CH_MR] = 0; ch_base[CH_MR] = 0; /* Initialize the uart structure if this is channel A. */ if (channel == 0) { /* Disable all interrupts. */ duart_base[DU_IMR] = sc->sc_duart->imr = 0; /* Output port config */ duart_base[DU_OPCR] = sc->sc_duart->opcr = 0; /* Speeds... */ sc->sc_duart->mode = 0; /* * Set initial speed to an illegal code that can be changed to * any other baud. */ sc->sc_duart->chan[0].icode = sc->sc_duart->chan[0].ocode = 0x2f; sc->sc_duart->chan[1].icode = sc->sc_duart->chan[1].ocode = 0x2f; sc->sc_duart->chan[0].ispeed = sc->sc_duart->chan[0].ospeed = 0; sc->sc_duart->chan[1].ispeed = sc->sc_duart->chan[1].ospeed = 0; sc->sc_duart->acr = 0; sc->sc_duart->acr |= ACR_CT_TCLK1; /* timer mode 1x clk */ sc->sc_duart->acr |= ACR_DELTA_DCDA; /* Set CD int */ } else { sc->sc_duart->acr |= ACR_DELTA_DCDB; /* Set CD int */ } if (scnsir == -1) { /* software intr: calls tty code, hence IPL_TTY */ scnsir = intr_establish(SOFTINT, scnsoft, NULL, "softscn", IPL_TTY, IPL_TTY, 0); } duart_base[DU_ACR] = (sc->sc_duart->mode & ACR_BRG) | sc->sc_duart->acr; if (unit == scnconsole) speed = scnconsrate; else speed = scndefaultrate; scn_config(unit, speed, speed, MR1_PNONE | MR1_CS8, MR2_STOP1); if (scnconsole == unit) shutdownhook_establish(scncnreinit, (void *) makedev(scnmajor, unit)); /* Turn on the receiver and transmitters */ ch_base[CH_CR] = CR_ENA_RX | CR_ENA_TX; /* Set up the interrupts. */ sc->sc_duart->imr |= INT_IP; scn_rxdisable(sc); splx(s); if (sc->sc_swflags) { printf("%c flags %d", delim, sc->sc_swflags); delim = ','; } #ifdef KGDB if (kgdb_dev == makedev(scnmajor, unit)) { if (scnconsole == unit) kgdb_dev = NODEV; /* can't debug over console port */ else { scninit(kgdb_dev, kgdb_rate); scn_rxenable(sc); scnkgdb = DEV_UNIT(kgdb_dev); kgdb_attach(scncngetc, scncnputc, kgdb_dev); if (kgdb_debug_init) { printf("%c ", delim); kgdb_connect(1); } else printf("%c kgdb enabled", delim); delim = ','; } } #endif printf("\n"); } /* ARGSUSED */ int scnopen(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { register struct tty *tp; register int unit = DEV_UNIT(dev); register struct scn_softc *sc; int error = 0; int hwset = 0; int s; if (unit >= scn_cd.cd_ndevs) return ENXIO; sc = SOFTC(unit); if (!sc) return ENXIO; s = spltty(); if (!sc->sc_tty) { tp = sc->sc_tty = ttymalloc(); tty_attach(tp); } else tp = sc->sc_tty; tp->t_oproc = scnstart; tp->t_param = scnparam; tp->t_hwiflow = scnhwiflow; tp->t_dev = dev; if ((tp->t_state & TS_ISOPEN) == 0) { tp->t_state |= TS_WOPEN; ttychars(tp); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_cflag = SCNDEF_CFLAG; sc->sc_rx_blocked = 0; if (sc->sc_swflags & SCN_SW_CLOCAL) tp->t_cflag |= CLOCAL; if (sc->sc_swflags & SCN_SW_CRTSCTS) tp->t_cflag |= CCTS_OFLOW | CRTS_IFLOW; tp->t_lflag = TTYDEF_LFLAG; if (unit == scnconsole) tp->t_ispeed = tp->t_ospeed = scnconsrate; else tp->t_ispeed = tp->t_ospeed = scndefaultrate; scnparam(tp, &tp->t_termios); ttsetwater(tp); /* Turn on DTR and RTS. */ SCN_OP_BIS(sc, sc->sc_op_rts | sc->sc_op_dtr); /* enable reciever interrupts */ scn_rxenable(sc); hwset = 1; /* set carrier state; */ if ((sc->sc_swflags & SCN_SW_SOFTCAR) || /* check ttyflags */ SCN_DCD(sc) || /* check h/w */ DEV_DIALOUT(dev)) tp->t_state |= TS_CARR_ON; else tp->t_state &= ~TS_CARR_ON; } else { if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) { splx(s); return (EBUSY); } else { if (DEV_DIALOUT(dev) && !SCN_DIALOUT(sc)) { /* dialout attempt while someone dialed in */ splx(s); return (EBUSY); } } } if (DEV_DIALOUT(dev)) { /* dialout open and no one dialed in (see above) */ SCN_SETDIALOUT(sc); /* mark line as dialed out */ } if (flag & O_NONBLOCK) { /* Non-blocking open * * If non-dialout open, and currenly opened for dialout you * lose. */ if (!DEV_DIALOUT(dev) && SCN_DIALOUT(sc)) { splx(s); return EBUSY; } } else { /* Blocking open * * This used to be more compact (while loop with lots of nots) * but it was incomprehensible. * * "getty" is the classic case of a program that waits here... */ for (;;) { if (SCN_DIALOUT(sc)) { /* Currently opened for dialout. */ if (DEV_DIALOUT(dev)) /* No need to wait if dialout open */ break; /* * "getty" falls thru and waits while line * dialed out. */ } else { /* Not currently opened for dialout. */ if ((tp->t_cflag & CLOCAL) || /* "local" line? */ (tp->t_state & TS_CARR_ON)) /* or carrier up */ break; /* no (more) waiting */ /* *"getty" on modem falls thru and waits for * carrier up */ } tp->t_state |= TS_WOPEN; error = ttysleep(tp, (caddr_t) & tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); if (error) { /* XXX should turn off chip if we're the only * waiter */ /* XXX drop RTS too? -plb */ /* XXX dialout state??? -plb */ SCN_OP_BIC(sc, sc->sc_op_dtr); splx(s); return error; } } } splx(s); error = (*linesw[tp->t_line].l_open) (dev, tp); if (error && hwset) { scn_rxdisable(sc); SCN_OP_BIC(sc, sc->sc_op_rts | sc->sc_op_dtr); } return (error); } /*ARGSUSED*/ int scnclose(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { register int unit = DEV_UNIT(dev); register struct scn_softc *sc = SOFTC(unit); register struct tty *tp = sc->sc_tty; if ((tp->t_state & TS_ISOPEN) == 0) return 0; (*linesw[tp->t_line].l_close) (tp, flag); #ifdef KGDB /* do not disable interrupts if debugging */ if (kgdb_dev != makedev(scnmajor, unit)) #endif if ((tp->t_state & TS_ISOPEN) == 0) { scn_rxdisable(sc); } if ((tp->t_cflag & HUPCL) && (sc->sc_swflags & SCN_SW_SOFTCAR) == 0) { SCN_OP_BIC(sc, sc->sc_op_dtr); /* hold low for 1 second */ (void) tsleep((caddr_t)sc, TTIPRI, ttclos, hz); } SCN_CLRDIALOUT(sc); ttyclose(tp); #if 0 if ((tp->t_state & TS_ISOPEN) == 0) { ttyfree(tp); sc->sc_tty = (struct tty *) NULL; } #endif return (0); } int scnread(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { register struct scn_softc *sc = SOFTC(DEV_UNIT(dev)); register struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_read) (tp, uio, flag)); } int scnwrite(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { register struct scn_softc *sc = SOFTC(DEV_UNIT(dev)); register struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_write) (tp, uio, flag)); } struct tty * scntty(dev) dev_t dev; { register struct scn_softc *sc = SOFTC(DEV_UNIT(dev)); return sc->sc_tty; } /* Worker routines for interrupt processing */ static __inline void dcd_int(sc, tp, new) struct scn_softc *sc; struct tty *tp; u_char new; { if (sc->sc_swflags & SCN_SW_SOFTCAR) return; #if 0 printf("scn%d: dcd_int ip %x SCN_DCD %x new %x ipcr %x\n", sc->unit, sc->sc_duart->base[DU_IP], SCN_DCD(sc), new, sc->sc_duart->base[DU_IPCR] ); #endif /* XXX set some flag to have some lower (soft) int call line discipline? */ if (!(*linesw[(u_char) tp->t_line].l_modem) (tp, new == 0? 1: 0)) { SCN_OP_BIC(sc, sc->sc_op_rts | sc->sc_op_dtr); } } /* * Print out a ring or fifo overrun error message. */ static void scnoverrun(unit, ptime, what) int unit; long *ptime; char *what; { if (*ptime != time.tv_sec) { *ptime = time.tv_sec; log(LOG_WARNING, "scn%d: %s overrun\n", unit, what); } } /* * Try to block or unblock input using hardware flow-control. * This is called by kern/tty.c if MDMBUF|CRTSCTS is set, and * if this function returns non-zero, the TS_TBLOCK flag will * be set or cleared according to the "stop" arg passed. */ int scnhwiflow(tp, stop) struct tty *tp; int stop; { int unit = DEV_UNIT(tp->t_dev); struct scn_softc *sc = SOFTC(unit); int s = splrtty(); if (!stop) { if (sc->sc_rbput - sc->sc_rbget - 1) { setsoftscn(); } } splx(s); return 1; } static void scnintr(arg) void *arg; { int line1 = (int)arg; /* NOTE: line _ONE_ */ register struct scn_softc *sc0 = SOFTC(line1 - 1); register struct scn_softc *sc1 = SOFTC(line1); register struct tty *tp0 = sc0->sc_tty; register struct tty *tp1 = sc1->sc_tty; register struct duart *duart = sc0->sc_duart; char rs_work; u_char rs_stat; u_char rs_ipcr; do { /* Loop to pick up ALL pending interrupts for device. */ rs_work = FALSE; rs_stat = duart->base[DU_ISR]; /* channel a */ if (tp0 != NULL) { if ((rs_stat & INT_TXA) && (tp0->t_state & TS_BUSY)) { /* output char done. */ tp0->t_state &= ~(TS_BUSY | TS_FLUSH); /* disable tx ints */ sc0->sc_duart->imr &= ~sc0->sc_tx_int; sc0->sc_duart->base[DU_IMR] = sc0->sc_duart->imr; if (sc0->sc_heldchanges) { scn_setchip(sc0); } (*linesw[tp0->t_line].l_start) (tp0); rs_work = TRUE; } } /* channel b */ if (tp1 != NULL) { if ((rs_stat & INT_TXB) && (tp1->t_state & TS_BUSY)) { /* output char done. */ tp1->t_state &= ~(TS_BUSY | TS_FLUSH); /* disable tx ints */ sc1->sc_duart->imr &= ~sc1->sc_tx_int; sc1->sc_duart->base[DU_IMR] = sc1->sc_duart->imr; if (sc1->sc_heldchanges) { scn_setchip(sc1); } (*linesw[tp1->t_line].l_start) (tp1); rs_work = TRUE; } } if (rs_stat & INT_IP) { rs_work = TRUE; rs_ipcr = duart->base[DU_IPCR]; if (rs_ipcr & IPCR_DELTA_DCDA && tp0 != NULL) { dcd_int(sc0, tp0, rs_ipcr & IPCR_DCDA); } if (rs_ipcr & IPCR_DELTA_DCDB && tp1 != NULL) { dcd_int(sc1, tp1, rs_ipcr & IPCR_DCDB); } } } while (rs_work); } /* * Handle rxrdy/ffull interrupt: QUICKLY poll both channels (checking * status first) and stash data in a ring buffer. Ring buffer scheme * borowed from sparc/zs.c requires NO interlock on data! * * This interrupt should NOT be included in spltty() mask since it * invokes NO tty code! The whole point is to allow tty input as much * of the time as possible, while deferring "heavy" character * processing until later. * * see scn.hw.README and scnsoft() for more info. * * THIS ROUTINE SHOULD BE KEPT AS CLEAN AS POSSIBLE!! * IT'S A CANDIDATE FOR RECODING IN ASSEMBLER!! */ static __inline int scn_rxintr(sc, line) struct scn_softc *sc; int line; { register char sr; register int i, n; int work; work = 0; i = sc->sc_rbput; while (work <= 10) { #define SCN_GETCH(SC) \ sr = (SC)->sc_chbase[CH_SR]; \ if ((sr & SR_RX_RDY) == 0) \ break; \ if (sr & (SR_PARITY | SR_FRAME | SR_BREAK | SR_OVERRUN)) \ goto exception; \ work++; \ (SC)->sc_rbuf[i++ & SCN_RING_MASK] = (SC)->sc_chbase[CH_DAT] SCN_GETCH(sc); SCN_GETCH(sc); SCN_GETCH(sc); /* XXX more here if 26C92? -plb */ continue; exception: #if defined(DDB) if (line == scnconsole && (sr & SR_BREAK)) { Debugger(); sr = sc->sc_chbase[CH_SR]; } #endif #if defined(KGDB) if (line == scnkgdb && (sr & SR_RX_RDY)) { kgdb_connect(1); sr = sc->sc_chbase[CH_SR]; } #endif work++; sc->sc_rbuf[i++ & SCN_RING_MASK] = (sr << 8) | sc->sc_chbase[CH_DAT]; sc->sc_chbase[CH_CR] = CR_CMD_RESET_ERR; /* resets break? */ RECOVER(); } /* * If ring is getting too full, try to block input. */ n = i - sc->sc_rbget; if (sc->sc_rbhiwat && (n > sc->sc_rbhiwat)) { /* If not CRTSCTS sc_rbhiwat is such that this * never happens */ if (scn_soft_rts) SCN_OP_BIC(sc, sc->sc_op_rts); else scn_rxdisable(sc); sc->sc_rx_blocked = 1; } sc->sc_rbput = i; return work; } static void scnrxintr(arg) void *arg; { int work = 0; int line1 = (int)arg; /* NOTE: line _ONE_ */ int line0 = line1 - 1; register struct scn_softc *sc0 = SOFTC(line0); register struct scn_softc *sc1 = SOFTC(line1); if (scn_soft_rts || !sc0->sc_rx_blocked) work = scn_rxintr(sc0, line0); if (scn_soft_rts || !sc1->sc_rx_blocked #ifdef KGDB && line1 < scn_cd.cd_ndevs #endif ) work += scn_rxintr(sc1, (int)line1); if (work > 0) { setsoftscn(); /* trigger s/w intr */ #ifdef SCN_TIMING microtime(&tstart); #endif } } /* * Here on soft interrupt (at spltty) to empty ring buffers. * * Dave's original scheme was to use the DUART reciever timeout * interrupt. This requires 2692's (which my board doesn't have), and * I also liked the idea of using the C/T to generate alternate and/or * arbitrary bauds. -plb * * The ringbuffer code comes from Chris Torek's SPARC 44bsd zs driver * (hence the LBL notice on top of this file), DOES NOT require * interlocking with interrupt levels! * * The 44bsd sparc/zs driver reads the ring buffer from a seperate * zssoftint, while the SunOS 4.x zs driver appears to use * timeout()'s. timeouts seem to be too slow to deal with high data * rates. I know, I tried them. * -plb. */ static void scnsoft(arg) void *arg; { int unit; #ifdef SCN_TIMING struct timeval tend; u_long t; microtime(&tend); t = (tend.tv_sec - tstart.tv_sec) * 1000000 + (tend.tv_usec - tstart.tv_usec); t = (t + tick / 20) / (tick / 10); if (t >= NJITTER - 1) { t = NJITTER - 1; } scn_jitter[t]++; #endif for (unit = 0; unit < scn_cd.cd_ndevs; unit++) { register struct scn_softc *sc; register struct tty *tp; register int n, get; sc = SOFTC(unit); if (sc == NULL) { continue; } tp = sc->sc_tty; #ifdef KGDB if (tp == NULL) { sc->sc_rbget = sc->sc_rbput; continue; } #endif if (tp == NULL || tp->t_state & TS_TBLOCK) { continue; } get = sc->sc_rbget; /* NOTE: fetch from rbput is atomic */ while (get != (n = sc->sc_rbput)) { /* * Compute the number of interrupts in the receive ring. * If the count is overlarge, we lost some events, and * must advance to the first valid one. It may get * overwritten if more data are arriving, but this is * too expensive to check and gains nothing (we already * lost out; all we can do at this point is trade one * kind of loss for another). */ n -= get; if (n > SCN_RING_SIZE) { scnoverrun(unit, &sc->sc_rotime, "ring"); get += n - SCN_RING_SIZE; n = SCN_RING_SIZE; sc->sc_ring_overruns++; } while (--n >= 0) { register int c, sr; if (tp->t_state & TS_TBLOCK) { sc->sc_rbget = get; goto done; } /* Race to keep ahead of incoming interrupts. */ c = sc->sc_rbuf[get++ & SCN_RING_MASK]; sr = c >> 8; /* extract status */ c &= 0xff; /* leave just character */ if (sr & SR_OVERRUN) { scnoverrun(unit, &sc->sc_fotime, "fifo"); sc->sc_fifo_overruns++; } if (sr & SR_PARITY) { c |= TTY_PE; sc->sc_parity_errors++; } if (sr & SR_FRAME) { c |= TTY_FE; sc->sc_framing_errors++; } if (sr & SR_BREAK) { #if 0 /* * See DDB_CHECK() comments in * scnrxintr() */ if (unit == scnconsole) Debugger(); #endif c = TTY_FE | 0; sc->sc_breaks++; } (*linesw[tp->t_line].l_rint) (c, tp); if (sc->sc_rx_blocked && n < SCN_RING_THRESH) { int s = splrtty(); sc->sc_rx_blocked = 0; if (scn_soft_rts) SCN_OP_BIS(sc, sc->sc_op_rts); else scn_rxenable(sc); splx(s); } } sc->sc_rbget = get; } done: } } /* Convert TIOCM_xxx bits to output port bits. */ static unsigned char opbits(sc, tioc_bits) struct scn_softc *sc; int tioc_bits; { return ((((tioc_bits) & TIOCM_DTR) ? sc->sc_op_dtr : 0) | (((tioc_bits) & TIOCM_RTS) ? sc->sc_op_rts : 0)); } int scnioctl(dev, cmd, data, flag, p) dev_t dev; int cmd; caddr_t data; int flag; struct proc *p; { register int unit = DEV_UNIT(dev); register struct scn_softc *sc = SOFTC(unit); register struct tty *tp = sc->sc_tty; register int error; error = (*linesw[tp->t_line].l_ioctl) (tp, cmd, data, flag, p); if (error >= 0) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return (error); switch (cmd) { case TIOCSBRK: sc->sc_chbase[CH_CR] = CR_CMD_START_BRK; break; case TIOCCBRK: sc->sc_chbase[CH_CR] = CR_CMD_STOP_BRK; break; case TIOCSDTR: SCN_OP_BIS(sc, sc->sc_op_dtr | sc->sc_op_rts); break; case TIOCCDTR: SCN_OP_BIC(sc, sc->sc_op_dtr | sc->sc_op_rts); break; case TIOCMSET: { int s; unsigned char sbits, cbits; /* set bits */ sbits = opbits(sc, *(int *) data); /* get bits to clear */ cbits = ~sbits & (sc->sc_op_dtr | sc->sc_op_rts); s = spltty(); if (sbits) { SCN_OP_BIS(sc, sbits); } if (cbits) { SCN_OP_BIC(sc, cbits); } splx(s); break; } case TIOCMBIS: SCN_OP_BIS(sc, opbits(sc, *(int *) data)); break; case TIOCMBIC: SCN_OP_BIC(sc, opbits(sc, *(int *) data)); break; case TIOCMGET: { int bits; unsigned char ip, op; /* s = spltty(); */ ip = sc->sc_duart->base[DU_IP]; /* * XXX sigh; cannot get op current state!! even if * maintained in private, RTS is done in h/w!! */ op = 0; /* splx(s); */ bits = 0; if (ip & sc->sc_ip_dcd) bits |= TIOCM_CD; if (ip & sc->sc_ip_cts) bits |= TIOCM_CTS; #if 0 if (op & sc->sc_op_dtr) bits |= TIOCM_DTR; if (op & sc->sc_op_rts) bits |= TIOCM_RTS; #endif *(int *) data = bits; break; } case TIOCGFLAGS:{ int bits = 0; if (sc->sc_swflags & SCN_SW_SOFTCAR) bits |= TIOCFLAG_SOFTCAR; if (sc->sc_swflags & SCN_SW_CLOCAL) bits |= TIOCFLAG_CLOCAL; if (sc->sc_swflags & SCN_SW_CRTSCTS) bits |= TIOCFLAG_CRTSCTS; if (sc->sc_swflags & SCN_SW_MDMBUF) bits |= TIOCFLAG_MDMBUF; *(int *) data = bits; break; } case TIOCSFLAGS:{ int userbits, driverbits = 0; error = suser(p->p_ucred, &p->p_acflag); if (error != 0) return (EPERM); userbits = *(int *) data; if (userbits & TIOCFLAG_SOFTCAR) driverbits |= SCN_SW_SOFTCAR; if (userbits & TIOCFLAG_CLOCAL) driverbits |= SCN_SW_CLOCAL; if (userbits & TIOCFLAG_CRTSCTS) driverbits |= SCN_SW_CRTSCTS; if (userbits & TIOCFLAG_MDMBUF) driverbits |= SCN_SW_MDMBUF; sc->sc_swflags = driverbits; break; } default: return (ENOTTY); } return (0); } int scnparam(tp, t) struct tty *tp; struct termios *t; { int cflag = t->c_cflag; int unit = DEV_UNIT(tp->t_dev); char mr1, mr2; int error; struct scn_softc *sc = SOFTC(unit); /* Is this a hang up? */ if (t->c_ospeed == B0) { SCN_OP_BIC(sc, sc->sc_op_dtr); /* leave DTR down. see comment in scnclose() -plb */ return (0); } mr1 = mr2 = 0; /* Parity? */ if (cflag & PARENB) { if ((cflag & PARODD) == 0) mr1 |= MR1_PEVEN; else mr1 |= MR1_PODD; } else mr1 |= MR1_PNONE; /* Stop bits. */ if (cflag & CSTOPB) mr2 |= MR2_STOP2; else mr2 |= MR2_STOP1; /* Data bits. */ switch (cflag & CSIZE) { case CS5: mr1 |= MR1_CS5; break; case CS6: mr1 |= MR1_CS6; break; case CS7: mr1 |= MR1_CS7; break; case CS8: default: mr1 |= MR1_CS8; break; } if (cflag & CCTS_OFLOW) mr2 |= MR2_TXCTS; if (cflag & CRTS_IFLOW) { if(!scn_soft_rts) mr1 |= MR1_RXRTS; sc->sc_rbhiwat = SCN_RING_HIWAT; } else { sc->sc_rbhiwat = 0; } error = scn_config(unit, t->c_ispeed, t->c_ospeed, mr1, mr2); /* If successful, copy to tty */ if (!error) { tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; tp->t_cflag = cflag; } return (error); } void scnstart(tp) struct tty *tp; { int s, c; int unit = DEV_UNIT(tp->t_dev); struct scn_softc *sc = SOFTC(unit); s = spltty(); if (tp->t_state & (TS_BUSY | TS_TTSTOP)) goto out; if (tp->t_outq.c_cc <= tp->t_lowat) { if (tp->t_state & TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t) & tp->t_outq); } if (tp->t_outq.c_cc == 0) /* plb 11/8/95 - from * isa/com.c */ goto out; selwakeup(&tp->t_wsel); } tp->t_state |= TS_BUSY; if (sc->sc_chbase[CH_SR] & SR_TX_RDY) { /* XXX load multiple characters if 26c92? -plb */ c = getc(&tp->t_outq); sc->sc_chbase[CH_DAT] = c; /* Enable transmit interrupts. */ sc->sc_duart->base[DU_IMR] = (sc->sc_duart->imr |= sc->sc_tx_int); } out: splx(s); } /* * Stop output on a line. */ /*ARGSUSED*/ void scnstop(tp, flag) struct tty *tp; int flag; { int s = spltty(); if (tp->t_state & TS_BUSY) { if ((tp->t_state & TS_TTSTOP) == 0) tp->t_state |= TS_FLUSH; } splx(s); } /* * Following are all routines needed for SCN to act as console. */ #ifdef VERYLOWDEBUG /* So the kernel can write in unmapped mode! */ extern int _mapped; #define SCN_BASE (_mapped ? SCN_FIRST_MAP_ADR : SCN_FIRST_ADR) #else #define SCN_BASE (SCN_FIRST_MAP_ADR) #endif #define DUADDR(dev) (u_char *)(SCN_BASE + (DEV_UNIT(dev) >> 1) * DUART_SZ) #define CHADDR(dev) (u_char *)(SCN_BASE + DEV_UNIT(dev) * CH_SZ) int scncnprobe(cp) struct consdev *cp; { /* Locate the major number. */ for (scnmajor = 0; scnmajor < nchrdev; scnmajor++) if (cdevsw[scnmajor].d_open == scnopen) break; /* initialize required fields */ cp->cn_dev = makedev(scnmajor, SCN_CONSOLE); cp->cn_pri = CN_NORMAL; return 1; } void scncnreinit(v) void *v; { dev_t dev = (dev_t)v; int unit = DEV_UNIT(dev); volatile u_char *du_base = DUADDR(dev); du_base[DU_OPSET] = (unit & 1) ? (OP_RTSB | OP_DTRB) : (OP_RTSA | OP_DTRA); } void scncninit(cp) struct consdev *cp; { scninit(cp->cn_dev, scnconsrate); scnconsole = DEV_UNIT(cp->cn_dev); } /* Used by scncninit and kgdb startup. */ int scninit(dev, rate) dev_t dev; int rate; { volatile u_char *du_base = DUADDR(dev); int unit = DEV_UNIT(dev); du_base[DU_OPSET] = (unit & 1) ? (OP_RTSB | OP_DTRB) : (OP_RTSA | OP_DTRA); scn_config(unit, rate, rate, MR1_PNONE | MR1_CS8, MR2_STOP1); return (0); } /* * Console kernel input character routine. */ int scncngetc(dev) dev_t dev; { volatile u_char *ch_base = CHADDR(dev); char c; int s = spltty(); while ((ch_base[CH_SR] & SR_RX_RDY) == 0); c = ch_base[CH_DAT]; splx(s); return c; } /* The pc532 does not turn off console polling. */ void scncnpollc(dev, on) dev_t dev; int on; { } /* * Console kernel output character routine. */ void scncnputc(dev, c) dev_t dev; char c; { volatile u_char *ch_base = CHADDR(dev); volatile u_char *du_base = DUADDR(dev); int s = spltty(); if (c == '\n') scncnputc(dev, '\r'); while ((ch_base[CH_SR] & SR_TX_RDY) == 0); ch_base[CH_DAT] = c; while ((ch_base[CH_SR] & SR_TX_RDY) == 0); du_base[DU_ISR]; splx(s); } void scn_ei(enabled) int enabled; { /* * Ideas: to make this go faster, precompute addresses and bits to * set when channel is opened, blocked or unblocked or closed. Do * both channels of DUART at once. */ int unit; for (unit = 0; unit < scn_cd.cd_ndevs; unit++) { register struct scn_softc *sc; sc = SOFTC(unit); if (!sc->sc_rx_blocked && sc->sc_swflags & SCN_SW_CRTSCTS) { if (enabled) { SCN_OP_BIS(sc, sc->sc_op_rts); } else { SCN_OP_BIC(sc, sc->sc_op_rts); /* "istop" */ } } } } #endif