/* $NetBSD: ds8390.h,v 1.3 1994/10/27 04:18:38 cgd Exp $ */ /*- * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)ds8390.h 7.1 (Berkeley) 5/9/91 */ /* * Nominal Semidestructor DS8390 Ethernet Chip * Register and bit definitions */ /* * Page register offset values */ #define ds_cmd 0x00 /* Command register: */ #define DSCM_STOP 0x01 /* Stop controller */ #define DSCM_START 0x02 /* Start controller */ #define DSCM_TRANS 0x04 /* Transmit packet */ #define DSCM_RREAD 0x08 /* Remote read */ #define DSCM_RWRITE 0x10 /* Remote write */ #define DSCM_NODMA 0x20 /* No Remote DMA present */ #define DSCM_PG0 0x00 /* Select Page 0 */ #define DSCM_PG1 0x40 /* Select Page 1 */ #define DSCM_PG2 0x80 /* Select Page 2? */ #define ds0_pstart 0x01 /* Page Start register */ #define ds0_pstop 0x02 /* Page Stop register */ #define ds0_bnry 0x03 /* Boundary Pointer */ #define ds0_tsr 0x04 /* Transmit Status (read-only) */ #define DSTS_PTX 0x01 /* Successful packet transmit */ #define DSTS_COLL 0x04 /* Packet transmit w/ collision*/ #define DSTS_COLL16 0x04 /* Packet had >16 collisions & fail */ #define DSTS_UND 0x20 /* FIFO Underrun on transmission*/ #define ds0_tpsr ds0_tsr /* Transmit Page (write-only) */ #define ds0_tbcr0 0x05 /* Transmit Byte count, low WO */ #define ds0_tbcr1 0x06 /* Transmit Byte count, high WO */ #define ds0_isr 0x07 /* Interrupt status register */ #define DSIS_RX 0x01 /* Successful packet reception */ #define DSIS_TX 0x02 /* Successful packet transmission */ #define DSIS_RXE 0x04 /* Packet reception w/error */ #define DSIS_TXE 0x08 /* Packet transmission w/error*/ #define DSIS_ROVRN 0x10 /* Receiver overrun in the ring*/ #define DSIS_CTRS 0x20 /* Diagnostic counters need attn */ #define DSIS_RDC 0x40 /* Remote DMA Complete */ #define DSIS_RESET 0x80 /* Reset Complete */ #define ds0_rsar0 0x08 /* Remote start address low WO */ #define ds0_rsar1 0x09 /* Remote start address high WO */ #define ds0_rbcr0 0x0A /* Remote byte count low WO */ #define ds0_rbcr1 0x0B /* Remote byte count high WO */ #define ds0_rsr 0x0C /* Receive status RO */ #define DSRS_RPC 0x01 /* Received Packet Complete */ #define ds0_rcr ds0_rsr /* Receive configuration WO */ #define DSRC_SEP 0x01 /* Save error packets */ #define DSRC_AR 0x02 /* Accept Runt packets */ #define DSRC_AB 0x04 /* Accept Broadcast packets */ #define DSRC_AM 0x08 /* Accept Multicast packets */ #define DSRC_PRO 0x10 /* Promiscuous physical */ #define DSRC_MON 0x20 /* Monitor mode */ #define ds0_tcr 0x0D /* Transmit configuration WO */ #define DSTC_CRC 0x01 /* Inhibit CRC */ #define DSTC_LB0 0x02 /* Encoded Loopback Control */ #define DSTC_LB1 0x04 /* Encoded Loopback Control */ #define DSTC_ATD 0x08 /* Auto Transmit Disable */ #define DSTC_OFST 0x10 /* Collision Offset Enable */ #define ds0_rcvalctr ds0_tcr /* Receive alignment err ctr RO */ #define ds0_dcr 0x0E /* Data configuration WO */ #define DSDC_WTS 0x01 /* Word Transfer Select */ #define DSDC_BOS 0x02 /* Byte Order Select */ #define DSDC_LAS 0x04 /* Long Address Select */ #define DSDC_BMS 0x08 /* Burst Mode Select */ #define DSDC_AR 0x10 /* Autoinitialize Remote */ #define DSDC_FT0 0x20 /* Fifo Threshold Select */ #define DSDC_FT1 0x40 /* Fifo Threshold Select */ #define ds0_rcvcrcctr ds0_dcr /* Receive CRC error counter RO */ #define ds0_imr 0x0F /* Interrupt mask register WO */ #define DSIM_PRXE 0x01 /* Packet received enable */ #define DSIM_PTXE 0x02 /* Packet transmitted enable */ #define DSIM_RXEE 0x04 /* Receive error enable */ #define DSIM_TXEE 0x08 /* Transmit error enable */ #define DSIM_OVWE 0x10 /* Overwrite warning enable */ #define DSIM_CNTE 0x20 /* Counter overflow enable */ #define DSIM_RDCE 0x40 /* Dma complete enable */ #define ds0_rcvfrmctr ds0_imr /* Receive Frame error cntr RO */ #define ds1_par0 ds0_pstart /* Physical address register 0 */ /* Physical address registers 1-4 */ #define ds1_par5 ds0_tbcr1 /* Physical address register 5 */ #define ds1_curr ds0_isr /* Current page (receive unit) */ #define ds1_mar0 ds0_rsar0 /* Multicast address register 0 */ /* Multicast address registers 1-6 */ #define ds1_mar7 ds0_imr /* Multicast address register 7 */ #define ds1_curr ds0_isr /* Current page (receive unit) */ #define DS_PGSIZE 256 /* Size of RAM pages in bytes */ /* * Packet receive header, 1 per each buffer page used in receive packet */ struct prhdr { u_char pr_status; /* is this a good packet, same as ds0_rsr */ u_char pr_nxtpg; /* next page of packet or next packet */ u_char pr_sz0; u_char pr_sz1; };