/* $NetBSD: if_ec.c,v 1.21 2004/05/11 22:45:09 wiz Exp $ */ /*- * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for National Semiconductor DS8390/WD83C690 based ethernet * adapters. * * Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved. * * Copyright (C) 1993, David Greenman. This software may be used, modified, * copied, distributed, and sold, in both source and binary form provided that * the above copyright and these terms are retained. Under no circumstances is * the author responsible for the proper functioning of this software, nor does * the author assume any responsibility for damages incurred with its use. */ /* * Device driver for the 3Com Etherlink II (3c503). */ #include __KERNEL_RCSID(0, "$NetBSD: if_ec.c,v 1.21 2004/05/11 22:45:09 wiz Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct ec_softc { struct dp8390_softc sc_dp8390; bus_space_tag_t sc_asict; /* space tag for ASIC */ bus_space_handle_t sc_asich; /* space handle for ASIC */ int sc_16bitp; /* are we 16 bit? */ void *sc_ih; /* interrupt handle */ }; int ec_probe __P((struct device *, struct cfdata *, void *)); void ec_attach __P((struct device *, struct device *, void *)); CFATTACH_DECL(ec, sizeof(struct ec_softc), ec_probe, ec_attach, NULL, NULL); int ec_set_media __P((struct ec_softc *, int)); void ec_media_init __P((struct dp8390_softc *)); int ec_mediachange __P((struct dp8390_softc *)); void ec_mediastatus __P((struct dp8390_softc *, struct ifmediareq *)); void ec_init_card __P((struct dp8390_softc *)); int ec_write_mbuf __P((struct dp8390_softc *, struct mbuf *, int)); int ec_ring_copy __P((struct dp8390_softc *, int, caddr_t, u_short)); void ec_read_hdr __P((struct dp8390_softc *, int, struct dp8390_ring *)); int ec_fake_test_mem __P((struct dp8390_softc *)); int ec_test_mem __P((struct dp8390_softc *)); __inline void ec_readmem __P((struct ec_softc *, int, u_int8_t *, int)); static const int ec_iobase[] = { 0x2e0, 0x2a0, 0x280, 0x250, 0x350, 0x330, 0x310, 0x300, }; #define NEC_IOBASE (sizeof(ec_iobase) / sizeof(ec_iobase[0])) static const int ec_membase[] = { ISACF_IOMEM_DEFAULT, ISACF_IOMEM_DEFAULT, ISACF_IOMEM_DEFAULT, ISACF_IOMEM_DEFAULT, 0xc8000, 0xcc000, 0xd8000, 0xdc000, }; #define NEC_MEMBASE (sizeof(ec_membase) / sizeof(ec_membase[0])) int ec_probe(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct isa_attach_args *ia = aux; bus_space_tag_t nict, asict, memt; bus_space_handle_t nich, asich, memh; bus_size_t memsize; int nich_valid, asich_valid, memh_valid; int i, rv = 0; u_int8_t x; nict = asict = ia->ia_iot; memt = ia->ia_memt; nich_valid = asich_valid = memh_valid = 0; /* * Hmm, a 16-bit card has 16k of memory, but only an 8k window * to it. */ memsize = 8192; if (ia->ia_nio < 1) return (0); if (ia->ia_niomem < 1) return (0); if (ia->ia_nirq < 1) return (0); if (ISA_DIRECT_CONFIG(ia)) return (0); /* Disallow wildcarded i/o addresses. */ if (ia->ia_io[0].ir_addr == ISACF_PORT_DEFAULT) return (0); /* Disallow wildcarded mem address. */ if (ia->ia_iomem[0].ir_addr == ISACF_IOMEM_DEFAULT) return (0); /* Validate the i/o base. */ for (i = 0; i < NEC_IOBASE; i++) if (ia->ia_io[0].ir_addr == ec_iobase[i]) break; if (i == NEC_IOBASE) return (0); /* Validate the mem base. */ for (i = 0; i < NEC_MEMBASE; i++) { if (ec_membase[i] == ISACF_IOMEM_DEFAULT) continue; if (ia->ia_iomem[0].ir_addr == ec_membase[i]) break; } if (i == NEC_MEMBASE) return (0); /* Attempt to map the NIC space. */ if (bus_space_map(nict, ia->ia_io[0].ir_addr + ELINK2_NIC_OFFSET, ELINK2_NIC_PORTS, 0, &nich)) goto out; nich_valid = 1; /* Attempt to map the ASIC space. */ if (bus_space_map(asict, ia->ia_io[0].ir_addr + ELINK2_ASIC_OFFSET, ELINK2_ASIC_PORTS, 0, &asich)) goto out; asich_valid = 1; /* Attempt to map the memory space. */ if (bus_space_map(memt, ia->ia_iomem[0].ir_addr, memsize, 0, &memh)) goto out; memh_valid = 1; /* * Verify that the kernel configured I/O address matches the * board configured I/O address. * * This is really only useful to see if something that looks like * the board is there; after all, we're already talking to it at * this point. */ x = bus_space_read_1(asict, asich, ELINK2_BCFR); if (x == 0 || (x & (x - 1)) != 0) goto out; i = ffs(x) - 1; if (ia->ia_io[0].ir_addr != ec_iobase[i]) goto out; /* * ...and for the memory address. Note we do not support * cards configured with shared memory disabled. */ x = bus_space_read_1(asict, asich, ELINK2_PCFR); if (x == 0 || (x & (x - 1)) != 0) goto out; i = ffs(x) - 1; if (ia->ia_iomem[0].ir_addr != ec_membase[i]) goto out; /* So, we say we've found it! */ ia->ia_nio = 1; /* XXX Really 2! */ ia->ia_io[0].ir_size = ELINK2_NIC_PORTS; ia->ia_niomem = 1; ia->ia_iomem[0].ir_size = memsize; ia->ia_nirq = 1; ia->ia_ndrq = 0; rv = 1; out: if (nich_valid) bus_space_unmap(nict, nich, ELINK2_NIC_PORTS); if (asich_valid) bus_space_unmap(asict, asich, ELINK2_ASIC_PORTS); if (memh_valid) bus_space_unmap(memt, memh, memsize); return (rv); } void ec_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct ec_softc *esc = (struct ec_softc *)self; struct dp8390_softc *sc = &esc->sc_dp8390; struct isa_attach_args *ia = aux; bus_space_tag_t nict, asict, memt; bus_space_handle_t nich, asich, memh; bus_size_t memsize; u_int8_t tmp; int i; printf("\n"); nict = asict = ia->ia_iot; memt = ia->ia_memt; /* * Hmm, a 16-bit card has 16k of memory, but only an 8k window * to it. */ memsize = ia->ia_iomem[0].ir_size; /* Map the NIC space. */ if (bus_space_map(nict, ia->ia_io[0].ir_addr + ELINK2_NIC_OFFSET, ELINK2_NIC_PORTS, 0, &nich)) { printf("%s: can't map nic i/o space\n", sc->sc_dev.dv_xname); return; } /* Map the ASIC space. */ if (bus_space_map(asict, ia->ia_io[0].ir_addr + ELINK2_ASIC_OFFSET, ELINK2_ASIC_PORTS, 0, &asich)) { printf("%s: can't map asic i/o space\n", sc->sc_dev.dv_xname); return; } /* Map the memory space. */ if (bus_space_map(memt, ia->ia_iomem[0].ir_addr, memsize, 0, &memh)) { printf("%s: can't map shared memory\n", sc->sc_dev.dv_xname); return; } esc->sc_asict = asict; esc->sc_asich = asich; sc->sc_regt = nict; sc->sc_regh = nich; sc->sc_buft = memt; sc->sc_bufh = memh; /* Interface is always enabled. */ sc->sc_enabled = 1; /* Registers are linear. */ for (i = 0; i < 16; i++) sc->sc_reg_map[i] = i; /* Now we can use the NIC_{GET,PUT}() macros. */ /* * Reset NIC and ASIC. Enable on-board transeiver throughout * reset sequence since it will lock up if the cable isn't * connected if we don't. */ bus_space_write_1(asict, asich, ELINK2_CR, ELINK2_CR_RST | ELINK2_CR_XSEL); /* Wait for a while, then un-reset it. */ delay(50); /* * The 3Com ASIC defaults to rather strange settings for the CR * after a reset. It's important to set it again after the * following write (this is done when we map the PROM below). */ bus_space_write_1(asict, asich, ELINK2_CR, ELINK2_CR_XSEL); /* Wait a bit for the NIC to recover from the reset. */ delay(5000); /* * Get the station address from on-board ROM. * * First, map Ethernet address PROM over the top of where the NIC * registers normally appear. */ bus_space_write_1(asict, asich, ELINK2_CR, ELINK2_CR_XSEL | ELINK2_CR_EALO); for (i = 0; i < ETHER_ADDR_LEN; i++) sc->sc_enaddr[i] = NIC_GET(nict, nich, i); /* * Unmap PROM - select NIC registers. The proper setting of the * transceiver is set in later in ec_init_card() via dp8390_init(). */ bus_space_write_1(asict, asich, ELINK2_CR, ELINK2_CR_XSEL); /* Determine if this is an 8-bit or 16-bit board. */ /* Select page 0 registers. */ NIC_PUT(nict, nich, ED_P0_CR, ED_CR_RD2 | ED_CR_PAGE_0 | ED_CR_STP); /* * Attempt to clear WTS. If it doesn't clear, then this is a * 16-bit board. */ NIC_PUT(nict, nich, ED_P0_DCR, 0); /* Select page 2 registers. */ NIC_PUT(nict, nich, ED_P0_CR, ED_CR_RD2 | ED_CR_PAGE_2 | ED_CR_STP); /* The 3c503 forces the WTS bit to a one if this is a 16-bit board. */ if (NIC_GET(nict, nich, ED_P2_DCR) & ED_DCR_WTS) esc->sc_16bitp = 1; else esc->sc_16bitp = 0; printf("%s: 3Com 3c503 Ethernet (%s-bit)\n", sc->sc_dev.dv_xname, esc->sc_16bitp ? "16" : "8"); /* Select page 0 registers. */ NIC_PUT(nict, nich, ED_P2_CR, ED_CR_RD2 | ED_CR_PAGE_0 | ED_CR_STP); sc->cr_proto = ED_CR_RD2; /* * DCR gets: * * FIFO threshold to 8, No auto-init Remote DMA, * byte order=80x86. * * 16-bit cards also get word-wide DMA transfers. */ sc->dcr_reg = ED_DCR_FT1 | ED_DCR_LS | (esc->sc_16bitp ? ED_DCR_WTS : 0); sc->test_mem = ec_fake_test_mem; sc->ring_copy = ec_ring_copy; sc->write_mbuf = ec_write_mbuf; sc->read_hdr = ec_read_hdr; sc->init_card = ec_init_card; sc->sc_media_init = ec_media_init; sc->sc_mediachange = ec_mediachange; sc->sc_mediastatus = ec_mediastatus; sc->mem_start = 0; sc->mem_size = memsize; /* Do generic parts of attach. */ if (dp8390_config(sc)) { printf("%s: configuration failed\n", sc->sc_dev.dv_xname); return; } /* * We need to override the way dp8390_config() set up our * shared memory. * * We have an entire 8k window to put the transmit buffers on the * 16-bit boards. But since the 16bit 3c503's shared memory is only * fast enough to overlap the loading of one full-size packet, trying * to load more than 2 buffers can actually leave the transmitter idle * during the load. So 2 seems the best value. (Although a mix of * variable-sized packets might change this assumption. Nonetheless, * we optimize for linear transfers of same-size packets.) */ if (esc->sc_16bitp) { if (sc->sc_dev.dv_cfdata->cf_flags & DP8390_NO_MULTI_BUFFERING) sc->txb_cnt = 1; else sc->txb_cnt = 2; sc->tx_page_start = ELINK2_TX_PAGE_OFFSET_16BIT; sc->rec_page_start = ELINK2_RX_PAGE_OFFSET_16BIT; sc->rec_page_stop = (memsize >> ED_PAGE_SHIFT) + sc->rec_page_start; sc->mem_ring = sc->mem_start; } else { sc->txb_cnt = 1; sc->tx_page_start = ELINK2_TX_PAGE_OFFSET_8BIT; sc->rec_page_start = sc->tx_page_start + ED_TXBUF_SIZE; sc->rec_page_stop = (memsize >> ED_PAGE_SHIFT) + sc->tx_page_start; sc->mem_ring = sc->mem_start + (ED_TXBUF_SIZE << ED_PAGE_SHIFT); } /* * Initialize CA page start/stop registers. Probably only needed * if doing DMA, but what the Hell. */ bus_space_write_1(asict, asich, ELINK2_PSTR, sc->rec_page_start); bus_space_write_1(asict, asich, ELINK2_PSPR, sc->rec_page_stop); /* * Program the IRQ. */ switch (ia->ia_irq[0].ir_irq) { case 9: tmp = ELINK2_IDCFR_IRQ2; break; case 3: tmp = ELINK2_IDCFR_IRQ3; break; case 4: tmp = ELINK2_IDCFR_IRQ4; break; case 5: tmp = ELINK2_IDCFR_IRQ5; break; break; case ISACF_IRQ_DEFAULT: printf("%s: wildcarded IRQ is not allowed\n", sc->sc_dev.dv_xname); return; default: printf("%s: invalid IRQ %d, must be 3, 4, 5, or 9\n", sc->sc_dev.dv_xname, ia->ia_irq[0].ir_irq); return; } bus_space_write_1(asict, asich, ELINK2_IDCFR, tmp); /* * Initialize the GA configuration register. Set bank and enable * shared memory. */ bus_space_write_1(asict, asich, ELINK2_GACFR, ELINK2_GACFR_RSEL | ELINK2_GACFR_MBS0); /* * Intialize "Vector Pointer" registers. These gawd-awful things * are compared to 20 bits of the address on the ISA, and if they * match, the shared memory is disabled. We set them to 0xffff0... * allegedly the reset vector. */ bus_space_write_1(asict, asich, ELINK2_VPTR2, 0xff); bus_space_write_1(asict, asich, ELINK2_VPTR1, 0xff); bus_space_write_1(asict, asich, ELINK2_VPTR0, 0x00); /* * Now run the real memory test. */ if (ec_test_mem(sc)) { printf("%s: memory test failed\n", sc->sc_dev.dv_xname); return; } /* Establish interrupt handler. */ esc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq, IST_EDGE, IPL_NET, dp8390_intr, sc); if (esc->sc_ih == NULL) printf("%s: can't establish interrupt\n", sc->sc_dev.dv_xname); } int ec_fake_test_mem(sc) struct dp8390_softc *sc; { /* * We have to do this after we initialize the GA, but we * have to do that after calling dp8390_config(), which * wants to test memory. Put this noop here, and then * actually test memory later. */ return (0); } int ec_test_mem(sc) struct dp8390_softc *sc; { struct ec_softc *esc = (struct ec_softc *)sc; bus_space_tag_t memt = sc->sc_buft; bus_space_handle_t memh = sc->sc_bufh; bus_size_t memsize = sc->mem_size; int i; if (esc->sc_16bitp) bus_space_set_region_2(memt, memh, 0, 0, memsize >> 1); else bus_space_set_region_1(memt, memh, 0, 0, memsize); if (esc->sc_16bitp) { for (i = 0; i < memsize; i += 2) { if (bus_space_read_2(memt, memh, i) != 0) goto fail; } } else { for (i = 0; i < memsize; i++) { if (bus_space_read_1(memt, memh, i) != 0) goto fail; } } return (0); fail: printf("%s: failed to clear shared memory at offset 0x%x\n", sc->sc_dev.dv_xname, i); return (1); } /* * Given a NIC memory source address and a host memory destination address, * copy 'len' from NIC to host using shared memory. The 'len' is rounded * up to a word - ok as long as mbufs are word-sized. */ __inline void ec_readmem(esc, from, to, len) struct ec_softc *esc; int from; u_int8_t *to; int len; { bus_space_tag_t memt = esc->sc_dp8390.sc_buft; bus_space_handle_t memh = esc->sc_dp8390.sc_bufh; if (len & 1) ++len; if (esc->sc_16bitp) bus_space_read_region_2(memt, memh, from, (u_int16_t *)to, len >> 1); else bus_space_read_region_1(memt, memh, from, to, len); } int ec_write_mbuf(sc, m, buf) struct dp8390_softc *sc; struct mbuf *m; int buf; { struct ec_softc *esc = (struct ec_softc *)sc; bus_space_tag_t asict = esc->sc_asict; bus_space_handle_t asich = esc->sc_asich; bus_space_tag_t memt = esc->sc_dp8390.sc_buft; bus_space_handle_t memh = esc->sc_dp8390.sc_bufh; u_int8_t *data, savebyte[2]; int savelen, len, leftover; #ifdef DIAGNOSTIC u_int8_t *lim; #endif savelen = m->m_pkthdr.len; /* * 8-bit boards are simple: we're already in the correct * page, and no alignment tricks are necessary. */ if (esc->sc_16bitp == 0) { for (; m != NULL; buf += m->m_len, m = m->m_next) bus_space_write_region_1(memt, memh, buf, mtod(m, u_int8_t *), m->m_len); if (savelen < ETHER_MIN_LEN - ETHER_CRC_LEN) { bus_space_set_region_1(memt, memh, buf, 0, ETHER_MIN_LEN - ETHER_CRC_LEN - savelen); savelen = ETHER_MIN_LEN - ETHER_CRC_LEN; } return (savelen); } /* * If it's a 16-bit board, we have transmit buffers * in a different page; switch to it. */ if (esc->sc_16bitp) bus_space_write_1(asict, asich, ELINK2_GACFR, ELINK2_GACFR_RSEL); /* Start out with no leftover data. */ leftover = 0; savebyte[0] = savebyte[1] = 0; for (; m != NULL; m = m->m_next) { len = m->m_len; if (len == 0) continue; data = mtod(m, u_int8_t *); #ifdef DIAGNOSTIC lim = data + len; #endif while (len > 0) { if (leftover) { /* * Data left over (from mbuf or realignment). * Buffer the next byte, and write it and * the leftover data out. */ savebyte[1] = *data++; len--; bus_space_write_2(memt, memh, buf, *(u_int16_t *)savebyte); buf += 2; leftover = 0; } else if (BUS_SPACE_ALIGNED_POINTER(data, u_int16_t) == 0) { /* * Unaligned data; buffer the next byte. */ savebyte[0] = *data++; len--; leftover = 1; } else { /* * Aligned data; output contiguous words as * much as we can, then buffer the remaining * byte, if any. */ leftover = len & 1; len &= ~1; bus_space_write_region_2(memt, memh, buf, (u_int16_t *)data, len >> 1); data += len; buf += len; if (leftover) savebyte[0] = *data++; len = 0; } } if (len < 0) panic("ec_write_mbuf: negative len"); #ifdef DIAGNOSTIC if (data != lim) panic("ec_write_mbuf: data != lim"); #endif } if (leftover) { savebyte[1] = 0; bus_space_write_2(memt, memh, buf, *(u_int16_t *)savebyte); buf += 2; } if (savelen < ETHER_MIN_LEN - ETHER_CRC_LEN) { bus_space_set_region_2(memt, memh, buf, 0, (ETHER_MIN_LEN - ETHER_CRC_LEN - savelen) >> 1); savelen = ETHER_MIN_LEN - ETHER_CRC_LEN; } /* * Switch back to receive page. */ if (esc->sc_16bitp) bus_space_write_1(asict, asich, ELINK2_GACFR, ELINK2_GACFR_RSEL | ELINK2_GACFR_MBS0); return (savelen); } int ec_ring_copy(sc, src, dst, amount) struct dp8390_softc *sc; int src; caddr_t dst; u_short amount; { struct ec_softc *esc = (struct ec_softc *)sc; u_short tmp_amount; /* Does copy wrap to lower addr in ring buffer? */ if (src + amount > sc->mem_end) { tmp_amount = sc->mem_end - src; /* Copy amount up to end of NIC memory. */ ec_readmem(esc, src, dst, tmp_amount); amount -= tmp_amount; src = sc->mem_ring; dst += tmp_amount; } ec_readmem(esc, src, dst, amount); return (src + amount); } void ec_read_hdr(sc, packet_ptr, packet_hdrp) struct dp8390_softc *sc; int packet_ptr; struct dp8390_ring *packet_hdrp; { struct ec_softc *esc = (struct ec_softc *)sc; ec_readmem(esc, packet_ptr, (u_int8_t *)packet_hdrp, sizeof(struct dp8390_ring)); #if BYTE_ORDER == BIG_ENDIAN packet_hdrp->count = bswap16(packet_hdrp->count); #endif } void ec_media_init(struct dp8390_softc *sc) { ifmedia_init(&sc->sc_media, 0, dp8390_mediachange, dp8390_mediastatus); ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_10_2, 0, NULL); ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_10_5, 0, NULL); ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_10_2); } int ec_mediachange(sc) struct dp8390_softc *sc; { struct ec_softc *esc = (struct ec_softc *)sc; struct ifmedia *ifm = &sc->sc_media; return (ec_set_media(esc, ifm->ifm_media)); } void ec_mediastatus(sc, ifmr) struct dp8390_softc *sc; struct ifmediareq *ifmr; { struct ifmedia *ifm = &sc->sc_media; /* * The currently selected media is always the active media. */ ifmr->ifm_active = ifm->ifm_cur->ifm_media; } void ec_init_card(sc) struct dp8390_softc *sc; { struct ec_softc *esc = (struct ec_softc *)sc; struct ifmedia *ifm = &sc->sc_media; (void) ec_set_media(esc, ifm->ifm_cur->ifm_media); } int ec_set_media(esc, media) struct ec_softc *esc; int media; { u_int8_t new; if (IFM_TYPE(media) != IFM_ETHER) return (EINVAL); switch (IFM_SUBTYPE(media)) { case IFM_10_2: new = ELINK2_CR_XSEL; break; case IFM_10_5: new = 0; break; default: return (EINVAL); } bus_space_write_1(esc->sc_asict, esc->sc_asich, ELINK2_CR, new); return (0); }