/* $NetBSD: msg.md.en,v 1.1 2001/10/15 16:22:52 uch Exp $ */ /* * Copyright 1997 Piermont Information Systems Inc. * All rights reserved. * * Written by Philip A. Nelson for Piermont Information Systems Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Piermont Information Systems Inc. * 4. The name of Piermont Information Systems Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS'' * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * */ /* MD Message catalog -- english, i386 version */ message md_hello { } message fullpart {We are now going to install NetBSD on the disk %s. You may choose to install NetBSD on the entire disk, or on part of the disk. Partial-disk installation creates a partition, or `slice', for NetBSD in your disk's MBR partition table. Whole-disk installation is `dangerously dedicated': it takes over the entire MBR. This WILL overwrite all existing data and OSes on the disk. It also prohibits later installation of multiple OSes on that disk (unless you overwrite NetBSD and reinstall using only part of the disk). Which would you like to do? } message wdtype {What kind of disk is %s?} message sectforward {Does your disk do AUTOMATIC sector forwarding?} message dlgeom {It appears that your disk, %s, has already been labeled with a BSD disklabel and the disklabel reports geometry that is different from the real geometry. The two geometries are: disklabel: %d cylinders, %d heads, %d sectors real geometry: %d cylinders, %d heads, %d sectors } /* the %s's will expand into three character strings */ message part_header { Total disksize %d sectors Start(%3s) Size(%3s) End(%3s) Kind ---------- ---------- ---------- ---- } message part_row_start_unused {%-1d: } message part_row_start_used {%-1d: %-10d %-10d %-10d} message part_row_end { %s\n} message setbiosgeom {You will be prompted for the geometry. Please enter the values you want. The number of cylinders should be <= 1024 and the number of sectors should be <= 63. If you have the BIOS set up to use > 1024 cylinders just truncate that number to 1024 here; NetBSD will know about the rest of the cylinders. } message confirmbiosgeom {Please verify if the BIOS disk geometry below is correct. The value for the number of cylinders may have been truncated to 1024. This is ok as long as the other numbers are correct; only 1024 cylinders can be specified in the MBR, the rest will be found in a different way by NetBSD. If you reenter the values, make sure that the values are correct and match those used by other systems on this disk. Values that do not match may result in data corruption. } message badgeom {The current values for your disk geometry are: } message realgeom {real geom: %d cyl, %d heads, %d sec (NB: for comparison only)\n} message biosgeom {BIOS geom: %d cyl, %d heads, %d sec\n} message reentergeom {The values just entered for the geometry are not usable. Please, reenter the geometry. } message ovrwrite {Your disk currently has a non-NetBSD partition. Do you really want to overwrite that partition with NetBSD? } message parttable {The partition table on your disk currently looks like the following: } message editpart {Partition %d looks like:\n\n} message editparttable {Edit your DOS partition table. The highlighted partition is the currently active partition. The partition table currently looks like: } message reeditpart {There are overlapping MBR partitions or there is not exactly one NetBSD partition. You should reedit the MBR partition table. Do you want to reedit it? } message nobsdpart {There is no NetBSD partition in the MBR partition table.} message multbsdpart {There are multiple NetBSD partitions in the MBR partition table. Partition %d will be the one used.} message dofdisk {Setting up the DOS partition table ... } message dobad144 {Installing the bad block table ... } message dobootblks {Installing boot blocks on %s.... } message askfsroot1 {I will be asking for partition information. First the root partition. You have %d %s left on your disk. } message askfsroot2 {Root partition size? } message askfsswap1 { Next the swap partition. You have %d %s left on your disk. } message askfsswap2 {Swap partition size? } message otherparts {You still have some space remaining unallocated on your disk. Please give sizes and mount points for the following partitions. } message askfspart1 {The next partition is /dev/%s%c. You have %d %s left on your disk. } message askfspart2 {Partition size? } message cyl1024 {The disklabel (set of partitions) you specified has a root partition that ends beyond the 1024 BIOS cylinder boundary. To be sure that the system can be booted at all times, the entire root partition must lie below that limit. You can either: } message onebiosmatch {This disk matches the following BIOS disk: } message onebiosmatch_header {BIOS # cylinders heads sectors ------ ---------- ------- ------- } message onebiosmatch_row {%-6x %-10d %-7d %d\n} message biosmultmatch {This disk matches the following BIOS disks: } message biosmultmatch_header { BIOS # cylinders heads sectors ------ ---------- ------- ------- } message biosmultmatch_row {%-1d: %-6x %-10d %-7d %d\n} message pickdisk {Choose disk: } message wmbrfail {Rewrite of MBR failed. I can't continue.} message partabovechs {The NetBSD part of the disk lies outside of the range that the BIOS on your machine can address. Booting from it may not be possible. Are you sure you that you want to do this? (Answering 'no' will take you back to the partition edit menu.)} message installbootsel {You appear to have more than one operating system installed on your disk. Do you want to install a bootselector so that you can select which system to start up when your computer is (re)started?} message installmbr {The start of the NetBSD part of the disk lies outside of the range that the BIOS can address. The initial bootcode in the Master Boot Record needs to be able to use the extended BIOS interface to boot off this partition. Do you want to install the NetBSD bootcode into the Master Boot Record so that this is ensured? Note that this will overwrite the existing code in the MBR, like some bootselectors.} message configbootsel {Configure the different bootselection menu items. You can change the simple menu entries for the matching partition entries that are displayed when the system boots. Also, you can specify the timeout and default action to be taken (if no selection is made in the bootmenu).\n} message bootseltimeout {Boot menu timeout: %d\n} message defbootselopt {Default boot menu action: } message defbootseloptactive {boot the first active partition.} message defbootseloptpart {boot off partition %d.\n} message defbootseloptdisk {boot off hard disk %d.\n} message bootselitemname {Enter name for menu item} message bootseltimeoutval {Timeout value in seconds (0-3600)} message bootsel_header {Number Type Menu entry ------ -------------------------------- ---------- } message bootsel_row {%-6d %-32s %s\n}