/* * Product specific probe and attach routines for: * 3940, 2940, aic7895, aic7890, aic7880, * aic7870, aic7860 and aic7850 SCSI controllers * * Copyright (c) 1994-2001 Justin T. Gibbs. * Copyright (c) 2000-2001 Adaptec Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: ahc_pci.c,v 1.45 2004/03/16 05:32:09 simonb Exp $ * * //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#57 $ * * $FreeBSD: /repoman/r/ncvs/src/sys/dev/aic7xxx/aic7xxx_pci.c,v 1.22 2003/01/20 20:44:55 gibbs Exp $ */ /* * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003 */ #include __KERNEL_RCSID(0, "$NetBSD: ahc_pci.c,v 1.45 2004/03/16 05:32:09 simonb Exp $"); #include #include #include #include #include #include #include #include #include #include #include #define AHC_PCI_IOADDR PCI_MAPREG_START /* I/O Address */ #define AHC_PCI_MEMADDR (PCI_MAPREG_START + 4) /* Mem I/O Address */ #include #include #include static __inline uint64_t ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) { uint64_t id; id = subvendor | (subdevice << 16) | ((uint64_t)vendor << 32) | ((uint64_t)device << 48); return (id); } #define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull #define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull #define ID_9005_GENERIC_MASK 0xFFF0FFFF00000000ull #define ID_9005_SISL_MASK 0x000FFFFF00000000ull #define ID_9005_SISL_ID 0x0005900500000000ull #define ID_AIC7850 0x5078900400000000ull #define ID_AHA_2902_04_10_15_20_30C 0x5078900478509004ull #define ID_AIC7855 0x5578900400000000ull #define ID_AIC7859 0x3860900400000000ull #define ID_AHA_2930CU 0x3860900438699004ull #define ID_AIC7860 0x6078900400000000ull #define ID_AIC7860C 0x6078900478609004ull #define ID_AHA_1480A 0x6075900400000000ull #define ID_AHA_2940AU_0 0x6178900400000000ull #define ID_AHA_2940AU_1 0x6178900478619004ull #define ID_AHA_2940AU_CN 0x2178900478219004ull #define ID_AHA_2930C_VAR 0x6038900438689004ull #define ID_AIC7870 0x7078900400000000ull #define ID_AHA_2940 0x7178900400000000ull #define ID_AHA_3940 0x7278900400000000ull #define ID_AHA_398X 0x7378900400000000ull #define ID_AHA_2944 0x7478900400000000ull #define ID_AHA_3944 0x7578900400000000ull #define ID_AHA_4944 0x7678900400000000ull #define ID_AIC7880 0x8078900400000000ull #define ID_AIC7880_B 0x8078900478809004ull #define ID_AHA_2940U 0x8178900400000000ull #define ID_AHA_3940U 0x8278900400000000ull #define ID_AHA_2944U 0x8478900400000000ull #define ID_AHA_3944U 0x8578900400000000ull #define ID_AHA_398XU 0x8378900400000000ull #define ID_AHA_4944U 0x8678900400000000ull #define ID_AHA_2940UB 0x8178900478819004ull #define ID_AHA_2930U 0x8878900478889004ull #define ID_AHA_2940U_PRO 0x8778900478879004ull #define ID_AHA_2940U_CN 0x0078900478009004ull #define ID_AIC7895 0x7895900478959004ull #define ID_AIC7895_ARO 0x7890900478939004ull #define ID_AIC7895_ARO_MASK 0xFFF0FFFFFFFFFFFFull #define ID_AHA_2940U_DUAL 0x7895900478919004ull #define ID_AHA_3940AU 0x7895900478929004ull #define ID_AHA_3944AU 0x7895900478949004ull #define ID_AIC7890 0x001F9005000F9005ull #define ID_AIC7890_ARO 0x00139005000F9005ull #define ID_AAA_131U2 0x0013900500039005ull #define ID_AHA_2930U2 0x0011900501819005ull #define ID_AHA_2940U2B 0x00109005A1009005ull #define ID_AHA_2940U2_OEM 0x0010900521809005ull #define ID_AHA_2940U2 0x00109005A1809005ull #define ID_AHA_2950U2B 0x00109005E1009005ull #define ID_AIC7892 0x008F9005FFFF9005ull #define ID_AIC7892_ARO 0x00839005FFFF9005ull #define ID_AHA_2915LP 0x0082900502109005ull #define ID_AHA_29160 0x00809005E2A09005ull #define ID_AHA_29160_CPQ 0x00809005E2A00E11ull #define ID_AHA_29160N 0x0080900562A09005ull #define ID_AHA_29160C 0x0080900562209005ull #define ID_AHA_29160B 0x00809005E2209005ull #define ID_AHA_19160B 0x0081900562A19005ull #define ID_AIC7896 0x005F9005FFFF9005ull #define ID_AIC7896_ARO 0x00539005FFFF9005ull #define ID_AHA_3950U2B_0 0x00509005FFFF9005ull #define ID_AHA_3950U2B_1 0x00509005F5009005ull #define ID_AHA_3950U2D_0 0x00519005FFFF9005ull #define ID_AHA_3950U2D_1 0x00519005B5009005ull #define ID_AIC7899 0x00CF9005FFFF9005ull #define ID_AIC7899_ARO 0x00C39005FFFF9005ull #define ID_AHA_3960D 0x00C09005F6209005ull #define ID_AHA_3960D_CPQ 0x00C09005F6200E11ull #define ID_AIC7810 0x1078900400000000ull #define ID_AIC7815 0x7815900400000000ull #define DEVID_9005_TYPE(id) ((id) & 0xF) #define DEVID_9005_TYPE_HBA 0x0 /* Standard Card */ #define DEVID_9005_TYPE_AAA 0x3 /* RAID Card */ #define DEVID_9005_TYPE_SISL 0x5 /* Container ROMB */ #define DEVID_9005_TYPE_MB 0xF /* On Motherboard */ #define DEVID_9005_MAXRATE(id) (((id) & 0x30) >> 4) #define DEVID_9005_MAXRATE_U160 0x0 #define DEVID_9005_MAXRATE_ULTRA2 0x1 #define DEVID_9005_MAXRATE_ULTRA 0x2 #define DEVID_9005_MAXRATE_FAST 0x3 #define DEVID_9005_MFUNC(id) (((id) & 0x40) >> 6) #define DEVID_9005_CLASS(id) (((id) & 0xFF00) >> 8) #define DEVID_9005_CLASS_SPI 0x0 /* Parallel SCSI */ #define SUBID_9005_TYPE(id) ((id) & 0xF) #define SUBID_9005_TYPE_MB 0xF /* On Motherboard */ #define SUBID_9005_TYPE_CARD 0x0 /* Standard Card */ #define SUBID_9005_TYPE_LCCARD 0x1 /* Low Cost Card */ #define SUBID_9005_TYPE_RAID 0x3 /* Combined with Raid */ #define SUBID_9005_TYPE_KNOWN(id) \ ((((id) & 0xF) == SUBID_9005_TYPE_MB) \ || (((id) & 0xF) == SUBID_9005_TYPE_CARD) \ || (((id) & 0xF) == SUBID_9005_TYPE_LCCARD) \ || (((id) & 0xF) == SUBID_9005_TYPE_RAID)) #define SUBID_9005_MAXRATE(id) (((id) & 0x30) >> 4) #define SUBID_9005_MAXRATE_ULTRA2 0x0 #define SUBID_9005_MAXRATE_ULTRA 0x1 #define SUBID_9005_MAXRATE_U160 0x2 #define SUBID_9005_MAXRATE_RESERVED 0x3 #define SUBID_9005_SEEPTYPE(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? ((id) & 0xC0) >> 6 \ : ((id) & 0x300) >> 8) #define SUBID_9005_SEEPTYPE_NONE 0x0 #define SUBID_9005_SEEPTYPE_1K 0x1 #define SUBID_9005_SEEPTYPE_2K_4K 0x2 #define SUBID_9005_SEEPTYPE_RESERVED 0x3 #define SUBID_9005_AUTOTERM(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? (((id) & 0x400) >> 10) == 0 \ : (((id) & 0x40) >> 6) == 0) #define SUBID_9005_NUMCHAN(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? ((id) & 0x300) >> 8 \ : ((id) & 0xC00) >> 10) #define SUBID_9005_LEGACYCONN(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? 0 \ : ((id) & 0x80) >> 7) #define SUBID_9005_MFUNCENB(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? ((id) & 0x800) >> 11 \ : ((id) & 0x1000) >> 12) /* * Informational only. Should use chip register to be * certain, but may be use in identification strings. */ #define SUBID_9005_CARD_SCSIWIDTH_MASK 0x2000 #define SUBID_9005_CARD_PCIWIDTH_MASK 0x4000 #define SUBID_9005_CARD_SEDIFF_MASK 0x8000 static ahc_device_setup_t ahc_aic785X_setup; static ahc_device_setup_t ahc_aic7860_setup; static ahc_device_setup_t ahc_apa1480_setup; static ahc_device_setup_t ahc_aic7870_setup; static ahc_device_setup_t ahc_aha394X_setup; static ahc_device_setup_t ahc_aha494X_setup; static ahc_device_setup_t ahc_aha398X_setup; static ahc_device_setup_t ahc_aic7880_setup; static ahc_device_setup_t ahc_aha2940Pro_setup; static ahc_device_setup_t ahc_aha394XU_setup; static ahc_device_setup_t ahc_aha398XU_setup; static ahc_device_setup_t ahc_aic7890_setup; static ahc_device_setup_t ahc_aic7892_setup; static ahc_device_setup_t ahc_aic7895_setup; static ahc_device_setup_t ahc_aic7896_setup; static ahc_device_setup_t ahc_aic7899_setup; static ahc_device_setup_t ahc_aha29160C_setup; static ahc_device_setup_t ahc_raid_setup; static ahc_device_setup_t ahc_aha394XX_setup; static ahc_device_setup_t ahc_aha494XX_setup; static ahc_device_setup_t ahc_aha398XX_setup; struct ahc_pci_identity ahc_pci_ident_table [] = { /* aic7850 based controllers */ { ID_AHA_2902_04_10_15_20_30C, ID_ALL_MASK, "Adaptec 2902/04/10/15/20/30C SCSI adapter", ahc_aic785X_setup }, /* aic7860 based controllers */ { ID_AHA_2930CU, ID_ALL_MASK, "Adaptec 2930CU SCSI adapter", ahc_aic7860_setup }, { ID_AHA_1480A & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 1480A Ultra SCSI adapter", ahc_apa1480_setup }, { ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2940A Ultra SCSI adapter", ahc_aic7860_setup }, { ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2940A/CN Ultra SCSI adapter", ahc_aic7860_setup }, { ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2930C Ultra SCSI adapter (VAR)", ahc_aic7860_setup }, /* aic7870 based controllers */ { ID_AHA_2940, ID_ALL_MASK, "Adaptec 2940 SCSI adapter", ahc_aic7870_setup }, { ID_AHA_3940, ID_ALL_MASK, "Adaptec 3940 SCSI adapter", ahc_aha394X_setup }, { ID_AHA_398X, ID_ALL_MASK, "Adaptec 398X SCSI RAID adapter", ahc_aha398X_setup }, { ID_AHA_2944, ID_ALL_MASK, "Adaptec 2944 SCSI adapter", ahc_aic7870_setup }, { ID_AHA_3944, ID_ALL_MASK, "Adaptec 3944 SCSI adapter", ahc_aha394X_setup }, { ID_AHA_4944, ID_ALL_MASK, "Adaptec 4944 SCSI adapter", ahc_aha494X_setup }, /* aic7880 based controllers */ { ID_AHA_2940U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2940 Ultra SCSI adapter", ahc_aic7880_setup }, { ID_AHA_3940U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 3940 Ultra SCSI adapter", ahc_aha394XU_setup }, { ID_AHA_2944U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2944 Ultra SCSI adapter", ahc_aic7880_setup }, { ID_AHA_3944U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 3944 Ultra SCSI adapter", ahc_aha394XU_setup }, { ID_AHA_398XU & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 398X Ultra SCSI RAID adapter", ahc_aha398XU_setup }, { /* * XXX Don't know the slot numbers * so we can't identify channels */ ID_AHA_4944U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 4944 Ultra SCSI adapter", ahc_aic7880_setup }, { ID_AHA_2930U & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2930 Ultra SCSI adapter", ahc_aic7880_setup }, { ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2940 Pro Ultra SCSI adapter", ahc_aha2940Pro_setup }, { ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec 2940/CN Ultra SCSI adapter", ahc_aic7880_setup }, /* Ignore all SISL (AAC on MB) based controllers. */ { ID_9005_SISL_ID, ID_9005_SISL_MASK, NULL, NULL }, /* aic7890 based controllers */ { ID_AHA_2930U2, ID_ALL_MASK, "Adaptec 2930 Ultra2 SCSI adapter", ahc_aic7890_setup }, { ID_AHA_2940U2B, ID_ALL_MASK, "Adaptec 2940B Ultra2 SCSI adapter", ahc_aic7890_setup }, { ID_AHA_2940U2_OEM, ID_ALL_MASK, "Adaptec 2940 Ultra2 SCSI adapter (OEM)", ahc_aic7890_setup }, { ID_AHA_2940U2, ID_ALL_MASK, "Adaptec 2940 Ultra2 SCSI adapter", ahc_aic7890_setup }, { ID_AHA_2950U2B, ID_ALL_MASK, "Adaptec 2950 Ultra2 SCSI adapter", ahc_aic7890_setup }, { ID_AIC7890_ARO, ID_ALL_MASK, "Adaptec aic7890/91 Ultra2 SCSI adapter (ARO)", ahc_aic7890_setup }, { ID_AAA_131U2, ID_ALL_MASK, "Adaptec AAA-131 Ultra2 RAID adapter", ahc_aic7890_setup }, /* aic7892 based controllers */ { ID_AHA_29160, ID_ALL_MASK, "Adaptec 29160 Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AHA_29160_CPQ, ID_ALL_MASK, "Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AHA_29160N, ID_ALL_MASK, "Adaptec 29160N Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AHA_29160C, ID_ALL_MASK, "Adaptec 29160C Ultra160 SCSI adapter", ahc_aha29160C_setup }, { ID_AHA_29160B, ID_ALL_MASK, "Adaptec 29160B Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AHA_19160B, ID_ALL_MASK, "Adaptec 19160B Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AIC7892_ARO, ID_ALL_MASK, "Adaptec aic7892 Ultra160 SCSI adapter (ARO)", ahc_aic7892_setup }, { ID_AHA_2915LP, ID_ALL_MASK, "Adaptec 2915LP Ultra160 SCSI adapter", ahc_aic7892_setup }, /* aic7895 based controllers */ { ID_AHA_2940U_DUAL, ID_ALL_MASK, "Adaptec 2940/DUAL Ultra SCSI adapter", ahc_aic7895_setup }, { ID_AHA_3940AU, ID_ALL_MASK, "Adaptec 3940A Ultra SCSI adapter", ahc_aic7895_setup }, { ID_AHA_3944AU, ID_ALL_MASK, "Adaptec 3944A Ultra SCSI adapter", ahc_aic7895_setup }, { ID_AIC7895_ARO, ID_AIC7895_ARO_MASK, "Adaptec aic7895 Ultra SCSI adapter (ARO)", ahc_aic7895_setup }, /* aic7896/97 based controllers */ { ID_AHA_3950U2B_0, ID_ALL_MASK, "Adaptec 3950B Ultra2 SCSI adapter", ahc_aic7896_setup }, { ID_AHA_3950U2B_1, ID_ALL_MASK, "Adaptec 3950B Ultra2 SCSI adapter", ahc_aic7896_setup }, { ID_AHA_3950U2D_0, ID_ALL_MASK, "Adaptec 3950D Ultra2 SCSI adapter", ahc_aic7896_setup }, { ID_AHA_3950U2D_1, ID_ALL_MASK, "Adaptec 3950D Ultra2 SCSI adapter", ahc_aic7896_setup }, { ID_AIC7896_ARO, ID_ALL_MASK, "Adaptec aic7896/97 Ultra2 SCSI adapter (ARO)", ahc_aic7896_setup }, /* aic7899 based controllers */ { ID_AHA_3960D, ID_ALL_MASK, "Adaptec 3960D Ultra160 SCSI adapter", ahc_aic7899_setup }, { ID_AHA_3960D_CPQ, ID_ALL_MASK, "Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter", ahc_aic7899_setup }, { ID_AIC7899_ARO, ID_ALL_MASK, "Adaptec aic7899 Ultra160 SCSI adapter (ARO)", ahc_aic7899_setup }, /* Generic chip probes for devices we don't know 'exactly' */ { ID_AIC7850 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7850 SCSI adapter", ahc_aic785X_setup }, { ID_AIC7855 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7855 SCSI adapter", ahc_aic785X_setup }, { ID_AIC7859 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7859 SCSI adapter", ahc_aic7860_setup }, { ID_AIC7860 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7860 Ultra SCSI adapter", ahc_aic7860_setup }, { ID_AIC7870 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7870 SCSI adapter", ahc_aic7870_setup }, { ID_AIC7880 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7880 Ultra SCSI adapter", ahc_aic7880_setup }, { ID_AIC7890 & ID_9005_GENERIC_MASK, ID_9005_GENERIC_MASK, "Adaptec aic7890/91 Ultra2 SCSI adapter", ahc_aic7890_setup }, { ID_AIC7892 & ID_9005_GENERIC_MASK, ID_9005_GENERIC_MASK, "Adaptec aic7892 Ultra160 SCSI adapter", ahc_aic7892_setup }, { ID_AIC7895 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7895 Ultra SCSI adapter", ahc_aic7895_setup }, { ID_AIC7896 & ID_9005_GENERIC_MASK, ID_9005_GENERIC_MASK, "Adaptec aic7896/97 Ultra2 SCSI adapter", ahc_aic7896_setup }, { ID_AIC7899 & ID_9005_GENERIC_MASK, ID_9005_GENERIC_MASK, "Adaptec aic7899 Ultra160 SCSI adapter", ahc_aic7899_setup }, { ID_AIC7810 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7810 RAID memory controller", ahc_raid_setup }, { ID_AIC7815 & ID_DEV_VENDOR_MASK, ID_DEV_VENDOR_MASK, "Adaptec aic7815 RAID memory controller", ahc_raid_setup } }; const u_int ahc_num_pci_devs = NUM_ELEMENTS(ahc_pci_ident_table); #define AHC_394X_SLOT_CHANNEL_A 4 #define AHC_394X_SLOT_CHANNEL_B 5 #define AHC_398X_SLOT_CHANNEL_A 4 #define AHC_398X_SLOT_CHANNEL_B 8 #define AHC_398X_SLOT_CHANNEL_C 12 #define AHC_494X_SLOT_CHANNEL_A 4 #define AHC_494X_SLOT_CHANNEL_B 5 #define AHC_494X_SLOT_CHANNEL_C 6 #define AHC_494X_SLOT_CHANNEL_D 7 #define DEVCONFIG 0x40 #define PCIERRGENDIS 0x80000000ul #define SCBSIZE32 0x00010000ul /* aic789X only */ #define REXTVALID 0x00001000ul /* ultra cards only */ #define MPORTMODE 0x00000400ul /* aic7870+ only */ #define RAMPSM 0x00000200ul /* aic7870+ only */ #define VOLSENSE 0x00000100ul #define PCI64BIT 0x00000080ul /* 64Bit PCI bus (Ultra2 Only)*/ #define SCBRAMSEL 0x00000080ul #define MRDCEN 0x00000040ul #define EXTSCBTIME 0x00000020ul /* aic7870 only */ #define EXTSCBPEN 0x00000010ul /* aic7870 only */ #define BERREN 0x00000008ul #define DACEN 0x00000004ul #define STPWLEVEL 0x00000002ul #define DIFACTNEGEN 0x00000001ul /* aic7870 only */ #define CSIZE_LATTIME 0x0c #define CACHESIZE 0x0000003ful /* only 5 bits */ #define LATTIME 0x0000ff00ul /* PCI STATUS definitions */ #define DPE 0x80 #define SSE 0x40 #define RMA 0x20 #define RTA 0x10 #define STA 0x08 #define DPR 0x01 static int ahc_9005_subdevinfo_valid(uint16_t vendor, uint16_t device, uint16_t subvendor, uint16_t subdevice); static int ahc_ext_scbram_present(struct ahc_softc *ahc); static void ahc_scbram_config(struct ahc_softc *ahc, int enable, int pcheck, int fast, int large); static void ahc_probe_ext_scbram(struct ahc_softc *ahc); int ahc_pci_probe __P((struct device *, struct cfdata *, void *)); void ahc_pci_attach __P((struct device *, struct device *, void *)); CFATTACH_DECL(ahc_pci, sizeof(struct ahc_softc), ahc_pci_probe, ahc_pci_attach, NULL, NULL); const struct ahc_pci_identity * ahc_find_pci_device(id, subid, func) pcireg_t id, subid; u_int func; { u_int64_t full_id; const struct ahc_pci_identity *entry; u_int i; full_id = ahc_compose_id(PCI_PRODUCT(id), PCI_VENDOR(id), PCI_PRODUCT(subid), PCI_VENDOR(subid)); /* * If the second function is not hooked up, ignore it. * Unfortunately, not all MB vendors implement the * subdevice ID as per the Adaptec spec, so do our best * to sanity check it prior to accepting the subdevice * ID as valid. */ if (func > 0 && ahc_9005_subdevinfo_valid(PCI_VENDOR(id), PCI_PRODUCT(id), PCI_VENDOR(subid), PCI_PRODUCT(subid)) && SUBID_9005_MFUNCENB(PCI_PRODUCT(subid)) == 0) return (NULL); for (i = 0; i < ahc_num_pci_devs; i++) { entry = &ahc_pci_ident_table[i]; if (entry->full_id == (full_id & entry->id_mask)) return (entry); } return (NULL); } int ahc_pci_probe(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct pci_attach_args *pa = aux; const struct ahc_pci_identity *entry; pcireg_t subid; subid = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); entry = ahc_find_pci_device(pa->pa_id, subid, pa->pa_function); return (entry != NULL && entry->setup != NULL) ? 1 : 0; } void ahc_pci_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct pci_attach_args *pa = aux; const struct ahc_pci_identity *entry; struct ahc_softc *ahc = (void *)self; pcireg_t command; u_int our_id = 0; u_int sxfrctl1; u_int scsiseq; u_int sblkctl; uint8_t dscommand0; uint32_t devconfig; int error; pcireg_t subid; int ioh_valid; bus_space_tag_t st, iot; bus_space_handle_t sh, ioh; #ifdef AHC_ALLOW_MEMIO int memh_valid; bus_space_tag_t memt; bus_space_handle_t memh; pcireg_t memtype; #endif pci_intr_handle_t ih; const char *intrstr; struct ahc_pci_busdata *bd; ahc_set_name(ahc, ahc->sc_dev.dv_xname); ahc->parent_dmat = pa->pa_dmat; command = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); subid = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); entry = ahc_find_pci_device(pa->pa_id, subid, pa->pa_function); if (entry == NULL) return; printf(": %s\n", entry->name); /* Keep information about the PCI bus */ bd = malloc(sizeof (struct ahc_pci_busdata), M_DEVBUF, M_NOWAIT); if (bd == NULL) { printf("%s: unable to allocate bus-specific data\n", ahc_name(ahc)); return; } memset(bd, 0, sizeof(struct ahc_pci_busdata)); bd->pc = pa->pa_pc; bd->tag = pa->pa_tag; bd->func = pa->pa_function; bd->dev = pa->pa_device; bd->class = pa->pa_class; ahc->bd = bd; ahc->description = entry->name; error = entry->setup(ahc); if (error != 0) return; ioh_valid = 0; #ifdef AHC_ALLOW_MEMIO memh_valid = 0; memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, AHC_PCI_MEMADDR); switch (memtype) { case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: memh_valid = (pci_mapreg_map(pa, AHC_PCI_MEMADDR, memtype, 0, &memt, &memh, NULL, NULL) == 0); break; default: memh_valid = 0; } #endif ioh_valid = (pci_mapreg_map(pa, AHC_PCI_IOADDR, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL) == 0); #if 0 printf("%s: mem mapping: memt 0x%x, memh 0x%x, iot 0x%x, ioh 0x%lx\n", ahc_name(ahc), memt, (u_int32_t)memh, (u_int32_t)iot, ioh); #endif if (ioh_valid) { st = iot; sh = ioh; #ifdef AHC_ALLOW_MEMIO } else if (memh_valid) { st = memt; sh = memh; #endif } else { printf(": unable to map registers\n"); return; } ahc->tag = st; ahc->bsh = sh; ahc->chip |= AHC_PCI; /* * Before we continue probing the card, ensure that * its interrupts are *disabled*. We don't want * a misstep to hang the machine in an interrupt * storm. */ ahc_intr_enable(ahc, FALSE); /* * XXX somehow reading this once fails on some sparc64 systems. * This may be a problem in the sparc64 PCI code. Doing it * twice works around it. */ devconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG); devconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG); /* * If we need to support high memory, enable dual * address cycles. This bit must be set to enable * high address bit generation even if we are on a * 64bit bus (PCI64BIT set in devconfig). */ if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { if (1/*bootverbose*/) printf("%s: Enabling 39Bit Addressing\n", ahc_name(ahc)); devconfig |= DACEN; } /* Ensure that pci error generation, a test feature, is disabled. */ devconfig |= PCIERRGENDIS; pci_conf_write(pa->pa_pc, pa->pa_tag, DEVCONFIG, devconfig); /* Ensure busmastering is enabled */ command |= PCI_COMMAND_MASTER_ENABLE;; pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); /* * Disable PCI parity error reporting. Users typically * do this to work around broken PCI chipsets that get * the parity timing wrong and thus generate lots of spurious * errors. */ if ((ahc->flags & AHC_DISABLE_PCI_PERR) != 0) command &= ~PCI_COMMAND_PARITY_ENABLE; pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); /* On all PCI adapters, we allow SCB paging */ ahc->flags |= AHC_PAGESCBS; error = ahc_softc_init(ahc); if (error != 0) goto error_out; ahc->bus_intr = ahc_pci_intr; /* Remember how the card was setup in case there is no SEEPROM */ if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) { ahc_pause(ahc); if ((ahc->features & AHC_ULTRA2) != 0) our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID; else our_id = ahc_inb(ahc, SCSIID) & OID; sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN; scsiseq = ahc_inb(ahc, SCSISEQ); } else { sxfrctl1 = STPWEN; our_id = 7; scsiseq = 0; } error = ahc_reset(ahc); if (error != 0) goto error_out; if ((ahc->features & AHC_DT) != 0) { u_int sfunct; /* Perform ALT-Mode Setup */ sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE; ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE); ahc_outb(ahc, OPTIONMODE, OPTIONMODE_DEFAULTS|AUTOACKEN|BUSFREEREV|EXPPHASEDIS); ahc_outb(ahc, SFUNCT, sfunct); /* Normal mode setup */ ahc_outb(ahc, CRCCONTROL1, CRCVALCHKEN|CRCENDCHKEN|CRCREQCHKEN |TARGCRCENDEN); } if (pci_intr_map(pa, &ih)) { printf("%s: couldn't map interrupt\n", ahc_name(ahc)); ahc_free(ahc); return; } intrstr = pci_intr_string(pa->pa_pc, ih); ahc->ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahc_intr, ahc); if (ahc->ih == NULL) { printf("%s: couldn't establish interrupt", ahc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); ahc_free(ahc); return; } if (intrstr != NULL) printf("%s: interrupting at %s\n", ahc_name(ahc), intrstr); dscommand0 = ahc_inb(ahc, DSCOMMAND0); dscommand0 |= MPARCKEN|CACHETHEN; if ((ahc->features & AHC_ULTRA2) != 0) { /* * DPARCKEN doesn't work correctly on * some MBs so don't use it. */ dscommand0 &= ~DPARCKEN; } /* * Handle chips that must have cache line * streaming (dis/en)abled. */ if ((ahc->bugs & AHC_CACHETHEN_DIS_BUG) != 0) dscommand0 |= CACHETHEN; if ((ahc->bugs & AHC_CACHETHEN_BUG) != 0) dscommand0 &= ~CACHETHEN; ahc_outb(ahc, DSCOMMAND0, dscommand0); ahc->pci_cachesize = pci_conf_read(pa->pa_pc, pa->pa_tag, CSIZE_LATTIME) & CACHESIZE; ahc->pci_cachesize *= 4; if ((ahc->bugs & AHC_PCI_2_1_RETRY_BUG) != 0 && ahc->pci_cachesize == 4) { pci_conf_write(pa->pa_pc, pa->pa_tag, CSIZE_LATTIME, 0); ahc->pci_cachesize = 0; } /* * We cannot perform ULTRA speeds without the presence * of the external precision resistor. */ if ((ahc->features & AHC_ULTRA) != 0) { uint32_t devconfig; devconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG); if ((devconfig & REXTVALID) == 0) ahc->features &= ~AHC_ULTRA; } ahc->seep_config = malloc(sizeof(*ahc->seep_config), M_DEVBUF, M_NOWAIT); if (ahc->seep_config == NULL) goto error_out; memset(ahc->seep_config, 0, sizeof(*ahc->seep_config)); /* See if we have a SEEPROM and perform auto-term */ ahc_check_extport(ahc, &sxfrctl1); /* * Take the LED out of diagnostic mode */ sblkctl = ahc_inb(ahc, SBLKCTL); ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); if ((ahc->features & AHC_ULTRA2) != 0) { ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_MAX|WR_DFTHRSH_MAX); } else { ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100); } if (ahc->flags & AHC_USEDEFAULTS) { /* * PCI Adapter default setup * Should only be used if the adapter does not have * a SEEPROM. */ /* See if someone else set us up already */ if ((ahc->flags & AHC_NO_BIOS_INIT) == 0 && scsiseq != 0) { printf("%s: Using left over BIOS settings\n", ahc_name(ahc)); ahc->flags &= ~AHC_USEDEFAULTS; ahc->flags |= AHC_BIOS_ENABLED; } else { /* * Assume only one connector and always turn * on termination. */ our_id = 0x07; sxfrctl1 = STPWEN; } ahc_outb(ahc, SCSICONF, our_id|ENSPCHK|RESET_SCSI); ahc->our_id = our_id; } /* * Take a look to see if we have external SRAM. * We currently do not attempt to use SRAM that is * shared among multiple controllers. */ ahc_probe_ext_scbram(ahc); /* * Record our termination setting for the * generic initialization routine. */ if ((sxfrctl1 & STPWEN) != 0) ahc->flags |= AHC_TERM_ENB_A; if (ahc_init(ahc)) goto error_out; ahc_attach(ahc); return; error_out: ahc_free(ahc); return; } static int ahc_9005_subdevinfo_valid(uint16_t device, uint16_t vendor, uint16_t subdevice, uint16_t subvendor) { int result; /* Default to invalid. */ result = 0; if (vendor == 0x9005 && subvendor == 0x9005 && subdevice != device && SUBID_9005_TYPE_KNOWN(subdevice) != 0) { switch (SUBID_9005_TYPE(subdevice)) { case SUBID_9005_TYPE_MB: break; case SUBID_9005_TYPE_CARD: case SUBID_9005_TYPE_LCCARD: /* * Currently only trust Adaptec cards to * get the sub device info correct. */ if (DEVID_9005_TYPE(device) == DEVID_9005_TYPE_HBA) result = 1; break; case SUBID_9005_TYPE_RAID: break; default: break; } } return (result); } /* * Test for the presense of external sram in an * "unshared" configuration. */ static int ahc_ext_scbram_present(struct ahc_softc *ahc) { u_int chip; int ramps; int single_user; uint32_t devconfig; chip = ahc->chip & AHC_CHIPID_MASK; devconfig = pci_conf_read(ahc->bd->pc, ahc->bd->tag, DEVCONFIG); single_user = (devconfig & MPORTMODE) != 0; if ((ahc->features & AHC_ULTRA2) != 0) ramps = (ahc_inb(ahc, DSCOMMAND0) & RAMPS) != 0; else if (chip == AHC_AIC7895 || chip == AHC_AIC7895C) /* * External SCBRAM arbitration is flakey * on these chips. Unfortunately this means * we don't use the extra SCB ram space on the * 3940AUW. */ ramps = 0; else if (chip >= AHC_AIC7870) ramps = (devconfig & RAMPSM) != 0; else ramps = 0; if (ramps && single_user) return (1); return (0); } /* * Enable external scbram. */ static void ahc_scbram_config(struct ahc_softc *ahc, int enable, int pcheck, int fast, int large) { uint32_t devconfig; if (ahc->features & AHC_MULTI_FUNC) { /* * Set the SCB Base addr (highest address bit) * depending on which channel we are. */ ahc_outb(ahc, SCBBADDR, ahc->bd->func); } ahc->flags &= ~AHC_LSCBS_ENABLED; if (large) ahc->flags |= AHC_LSCBS_ENABLED; devconfig = pci_conf_read(ahc->bd->pc, ahc->bd->tag, DEVCONFIG); if ((ahc->features & AHC_ULTRA2) != 0) { u_int dscommand0; dscommand0 = ahc_inb(ahc, DSCOMMAND0); if (enable) dscommand0 &= ~INTSCBRAMSEL; else dscommand0 |= INTSCBRAMSEL; if (large) dscommand0 &= ~USCBSIZE32; else dscommand0 |= USCBSIZE32; ahc_outb(ahc, DSCOMMAND0, dscommand0); } else { if (fast) devconfig &= ~EXTSCBTIME; else devconfig |= EXTSCBTIME; if (enable) devconfig &= ~SCBRAMSEL; else devconfig |= SCBRAMSEL; if (large) devconfig &= ~SCBSIZE32; else devconfig |= SCBSIZE32; } if (pcheck) devconfig |= EXTSCBPEN; else devconfig &= ~EXTSCBPEN; pci_conf_write(ahc->bd->pc, ahc->bd->tag, DEVCONFIG, devconfig); } /* * Take a look to see if we have external SRAM. * We currently do not attempt to use SRAM that is * shared among multiple controllers. */ static void ahc_probe_ext_scbram(struct ahc_softc *ahc) { int num_scbs; int test_num_scbs; int enable; int pcheck; int fast; int large; enable = FALSE; pcheck = FALSE; fast = FALSE; large = FALSE; num_scbs = 0; if (ahc_ext_scbram_present(ahc) == 0) goto done; /* * Probe for the best parameters to use. */ ahc_scbram_config(ahc, /*enable*/TRUE, pcheck, fast, large); num_scbs = ahc_probe_scbs(ahc); if (num_scbs == 0) { /* The SRAM wasn't really present. */ goto done; } enable = TRUE; /* * Clear any outstanding parity error * and ensure that parity error reporting * is enabled. */ ahc_outb(ahc, SEQCTL, 0); ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, CLRINT, CLRBRKADRINT); /* Now see if we can do parity */ ahc_scbram_config(ahc, enable, /*pcheck*/TRUE, fast, large); num_scbs = ahc_probe_scbs(ahc); if ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0 || (ahc_inb(ahc, ERROR) & MPARERR) == 0) pcheck = TRUE; /* Clear any resulting parity error */ ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, CLRINT, CLRBRKADRINT); /* Now see if we can do fast timing */ ahc_scbram_config(ahc, enable, pcheck, /*fast*/TRUE, large); test_num_scbs = ahc_probe_scbs(ahc); if (test_num_scbs == num_scbs && ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0 || (ahc_inb(ahc, ERROR) & MPARERR) == 0)) fast = TRUE; /* * See if we can use large SCBs and still maintain * the same overall count of SCBs. */ if ((ahc->features & AHC_LARGE_SCBS) != 0) { ahc_scbram_config(ahc, enable, pcheck, fast, /*large*/TRUE); test_num_scbs = ahc_probe_scbs(ahc); if (test_num_scbs >= num_scbs) { large = TRUE; num_scbs = test_num_scbs; if (num_scbs >= 64) { /* * We have enough space to move the * "busy targets table" into SCB space * and make it qualify all the way to the * lun level. */ ahc->flags |= AHC_SCB_BTT; } } } done: /* * Disable parity error reporting until we * can load instruction ram. */ ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS); /* Clear any latched parity error */ ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, CLRINT, CLRBRKADRINT); if (1/*bootverbose*/ && enable) { printf("%s: External SRAM, %s access%s, %dbytes/SCB\n", ahc_name(ahc), fast ? "fast" : "slow", pcheck ? ", parity checking enabled" : "", large ? 64 : 32); } ahc_scbram_config(ahc, enable, pcheck, fast, large); } #if 0 /* * Perform some simple tests that should catch situations where * our registers are invalidly mapped. */ int ahc_pci_test_register_access(struct ahc_softc *ahc) { int error; u_int status1; uint32_t cmd; uint8_t hcntrl; error = EIO; /* * Enable PCI error interrupt status, but suppress NMIs * generated by SERR raised due to target aborts. */ cmd = pci_conf_read(ahc->bd->pc, ahc->bd->tag, PCIR_COMMAND); pci_conf_write(ahc->bd->pc, ahc->bd->tag, PCIR_COMMAND, cmd & ~PCIM_CMD_SERRESPEN); /* * First a simple test to see if any * registers can be read. Reading * HCNTRL has no side effects and has * at least one bit that is guaranteed to * be zero so it is a good register to * use for this test. */ hcntrl = ahc_inb(ahc, HCNTRL); if (hcntrl == 0xFF) goto fail; /* * Next create a situation where write combining * or read prefetching could be initiated by the * CPU or host bridge. Our device does not support * either, so look for data corruption and/or flagged * PCI errors. */ ahc_outb(ahc, HCNTRL, hcntrl|PAUSE); while (ahc_is_paused(ahc) == 0) ; ahc_outb(ahc, SEQCTL, PERRORDIS); ahc_outb(ahc, SCBPTR, 0); ahc_outl(ahc, SCB_BASE, 0x5aa555aa); if (ahc_inl(ahc, SCB_BASE) != 0x5aa555aa) goto fail; status1 = pci_conf_read(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG + 1); if ((status1 & STA) != 0) goto fail; error = 0; fail: /* Silently clear any latched errors. */ status1 = pci_conf_read(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG + 1); ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1, status1, /*bytes*/1); ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS); ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2); return (error); } #endif void ahc_pci_intr(struct ahc_softc *ahc) { u_int error; u_int status1; error = ahc_inb(ahc, ERROR); if ((error & PCIERRSTAT) == 0) return; status1 = pci_conf_read(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG); printf("%s: PCI error Interrupt at seqaddr = 0x%x\n", ahc_name(ahc), ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8)); if (status1 & DPE) { printf("%s: Data Parity Error Detected during address " "or write data phase\n", ahc_name(ahc)); } if (status1 & SSE) { printf("%s: Signal System Error Detected\n", ahc_name(ahc)); } if (status1 & RMA) { printf("%s: Received a Master Abort\n", ahc_name(ahc)); } if (status1 & RTA) { printf("%s: Received a Target Abort\n", ahc_name(ahc)); } if (status1 & STA) { printf("%s: Signaled a Target Abort\n", ahc_name(ahc)); } if (status1 & DPR) { printf("%s: Data Parity Error has been reported via PERR#\n", ahc_name(ahc)); } /* Clear latched errors. */ pci_conf_write(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG, status1); if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) { printf("%s: Latched PCIERR interrupt with " "no status bits set\n", ahc_name(ahc)); } else { ahc_outb(ahc, CLRINT, CLRPARERR); } ahc_unpause(ahc); } static int ahc_aic785X_setup(struct ahc_softc *ahc) { uint8_t rev; ahc->channel = 'A'; ahc->chip = AHC_AIC7850; ahc->features = AHC_AIC7850_FE; ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG; rev = PCI_REVISION(ahc->bd->class); if (rev >= 1) ahc->bugs |= AHC_PCI_2_1_RETRY_BUG; return (0); } static int ahc_aic7860_setup(struct ahc_softc *ahc) { uint8_t rev; ahc->channel = 'A'; ahc->chip = AHC_AIC7860; ahc->features = AHC_AIC7860_FE; ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG; rev = PCI_REVISION(ahc->bd->class); if (rev >= 1) ahc->bugs |= AHC_PCI_2_1_RETRY_BUG; return (0); } static int ahc_apa1480_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7860_setup(ahc); if (error != 0) return (error); ahc->features |= AHC_REMOVABLE; return (0); } static int ahc_aic7870_setup(struct ahc_softc *ahc) { ahc->channel = 'A'; ahc->chip = AHC_AIC7870; ahc->features = AHC_AIC7870_FE; ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG; return (0); } static int ahc_aha394X_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7870_setup(ahc); if (error == 0) error = ahc_aha394XX_setup(ahc); return (error); } static int ahc_aha398X_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7870_setup(ahc); if (error == 0) error = ahc_aha398XX_setup(ahc); return (error); } static int ahc_aha494X_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7870_setup(ahc); if (error == 0) error = ahc_aha494XX_setup(ahc); return (error); } static int ahc_aic7880_setup(struct ahc_softc *ahc) { uint8_t rev; ahc->channel = 'A'; ahc->chip = AHC_AIC7880; ahc->features = AHC_AIC7880_FE; ahc->bugs |= AHC_TMODE_WIDEODD_BUG; rev = PCI_REVISION(ahc->bd->class); if (rev >= 1) { ahc->bugs |= AHC_PCI_2_1_RETRY_BUG; } else { ahc->bugs |= AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG; } return (0); } static int ahc_aha2940Pro_setup(struct ahc_softc *ahc) { ahc->flags |= AHC_INT50_SPEEDFLEX; return (ahc_aic7880_setup(ahc)); } static int ahc_aha394XU_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7880_setup(ahc); if (error == 0) error = ahc_aha394XX_setup(ahc); return (error); } static int ahc_aha398XU_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7880_setup(ahc); if (error == 0) error = ahc_aha398XX_setup(ahc); return (error); } static int ahc_aic7890_setup(struct ahc_softc *ahc) { uint8_t rev; ahc->channel = 'A'; ahc->chip = AHC_AIC7890; ahc->features = AHC_AIC7890_FE; ahc->flags |= AHC_NEWEEPROM_FMT; rev = PCI_REVISION(ahc->bd->class); if (rev == 0) ahc->bugs |= AHC_AUTOFLUSH_BUG|AHC_CACHETHEN_BUG; return (0); } static int ahc_aic7892_setup(struct ahc_softc *ahc) { ahc->channel = 'A'; ahc->chip = AHC_AIC7892; ahc->features = AHC_AIC7892_FE; ahc->flags |= AHC_NEWEEPROM_FMT; ahc->bugs |= AHC_SCBCHAN_UPLOAD_BUG; return (0); } static int ahc_aic7895_setup(struct ahc_softc *ahc) { uint8_t rev; ahc->channel = (ahc->bd->func == 1) ? 'B' : 'A'; /* * The 'C' revision of the aic7895 has a few additional features. */ rev = PCI_REVISION(ahc->bd->class); if (rev >= 4) { ahc->chip = AHC_AIC7895C; ahc->features = AHC_AIC7895C_FE; } else { u_int command; ahc->chip = AHC_AIC7895; ahc->features = AHC_AIC7895_FE; /* * The BIOS disables the use of MWI transactions * since it does not have the MWI bug work around * we have. Disabling MWI reduces performance, so * turn it on again. */ command = pci_conf_read(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG); command |= PCI_COMMAND_INVALIDATE_ENABLE; pci_conf_write(ahc->bd->pc, ahc->bd->tag, PCI_COMMAND_STATUS_REG, command); ahc->bugs |= AHC_PCI_MWI_BUG; } /* * XXX Does CACHETHEN really not work??? What about PCI retry? * on C level chips. Need to test, but for now, play it safe. */ ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_PCI_2_1_RETRY_BUG | AHC_CACHETHEN_BUG; #if 0 uint32_t devconfig; /* * Cachesize must also be zero due to stray DAC * problem when sitting behind some bridges. */ pci_conf_write(ahc->bd->pc, ahc->bd->tag, CSIZE_LATTIME, 0); devconfig = pci_conf_read(ahc->bd->pc, ahc->bd->tag, DEVCONFIG); devconfig |= MRDCEN; pci_conf_write(ahc->bd->pc, ahc->bd->tag, DEVCONFIG, devconfig); #endif ahc->flags |= AHC_NEWEEPROM_FMT; return (0); } static int ahc_aic7896_setup(struct ahc_softc *ahc) { ahc->channel = (ahc->bd->func == 1) ? 'B' : 'A'; ahc->chip = AHC_AIC7896; ahc->features = AHC_AIC7896_FE; ahc->flags |= AHC_NEWEEPROM_FMT; ahc->bugs |= AHC_CACHETHEN_DIS_BUG; return (0); } static int ahc_aic7899_setup(struct ahc_softc *ahc) { ahc->channel = (ahc->bd->func == 1) ? 'B' : 'A'; ahc->chip = AHC_AIC7899; ahc->features = AHC_AIC7899_FE; ahc->flags |= AHC_NEWEEPROM_FMT; ahc->bugs |= AHC_SCBCHAN_UPLOAD_BUG; return (0); } static int ahc_aha29160C_setup(struct ahc_softc *ahc) { int error; error = ahc_aic7899_setup(ahc); if (error != 0) return (error); ahc->features |= AHC_REMOVABLE; return (0); } static int ahc_raid_setup(struct ahc_softc *ahc) { printf("RAID functionality unsupported\n"); return (ENXIO); } static int ahc_aha394XX_setup(struct ahc_softc *ahc) { switch (ahc->bd->dev) { case AHC_394X_SLOT_CHANNEL_A: ahc->channel = 'A'; break; case AHC_394X_SLOT_CHANNEL_B: ahc->channel = 'B'; break; default: printf("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc->bd->dev); ahc->channel = 'A'; } return (0); } static int ahc_aha398XX_setup(struct ahc_softc *ahc) { switch (ahc->bd->dev) { case AHC_398X_SLOT_CHANNEL_A: ahc->channel = 'A'; break; case AHC_398X_SLOT_CHANNEL_B: ahc->channel = 'B'; break; case AHC_398X_SLOT_CHANNEL_C: ahc->channel = 'C'; break; default: printf("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc->bd->dev); ahc->channel = 'A'; break; } ahc->flags |= AHC_LARGE_SEEPROM; return (0); } static int ahc_aha494XX_setup(struct ahc_softc *ahc) { switch (ahc->bd->dev) { case AHC_494X_SLOT_CHANNEL_A: ahc->channel = 'A'; break; case AHC_494X_SLOT_CHANNEL_B: ahc->channel = 'B'; break; case AHC_494X_SLOT_CHANNEL_C: ahc->channel = 'C'; break; case AHC_494X_SLOT_CHANNEL_D: ahc->channel = 'D'; break; default: printf("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc->bd->dev); ahc->channel = 'A'; } ahc->flags |= AHC_LARGE_SEEPROM; return (0); }