/* $NetBSD: atppcvar.h,v 1.4 2004/04/21 17:38:48 drochner Exp $ */ /*- * Copyright (c) 2001 Alcove - Nicolas Souchu * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * FreeBSD: src/sys/isa/ppcreg.h,v 1.10.2.4 2001/10/02 05:21:45 nsouch Exp * */ #ifndef __ATPPCVAR_H #define __ATPPCVAR_H #include #include #include #include #include /* Maximum time to wait for device response */ #define MAXBUSYWAIT (5 * (hz)) /* Poll interval when wating for device to become ready */ #define ATPPC_POLL ((hz)/10) /* Interrupt priority level for atppc device */ #define IPL_ATPPC IPL_TTY #define splatppc spltty /* Diagnostic and verbose printing macros */ #ifdef ATPPC_DEBUG extern int atppc_debug; #define ATPPC_DPRINTF(arg) if(atppc_debug) printf arg #else #define ATPPC_DPRINTF(arg) #endif #ifdef ATPPC_VERBOSE extern int atppc_verbose; #define ATPPC_VPRINTF(arg) if(atppc_verbose) printf arg #else #define ATPPC_VPRINTF(arg) #endif /* Flag used in DMA transfer */ #define ATPPC_DMA_MODE_READ 0x0 #define ATPPC_DMA_MODE_WRITE 0x1 /* Flags passed via config */ #define ATPPC_FLAG_DISABLE_INTR 0x01 #define ATPPC_FLAG_DISABLE_DMA 0x02 /* Locking for atppc device */ #if defined(MULTIPROCESSOR) || defined (LOCKDEBUG) #include #define ATPPC_SC_LOCK(sc) (&((sc)->sc_lock)) #define ATPPC_LOCK_INIT(sc) simple_lock_init(ATPPC_SC_LOCK((sc))) #define ATPPC_LOCK(sc) simple_lock(ATPPC_SC_LOCK((sc))) #define ATPPC_UNLOCK(sc) simple_unlock(ATPPC_SC_LOCK((sc))) #else /* !(MULTIPROCESSOR) && !(LOCKDEBUG) */ #define ATPPC_LOCK_INIT(sc) #define ATPPC_LOCK(sc) #define ATPPC_UNLOCK(sc) #define ATPPC_SC_LOCK(sc) NULL #endif /* MULTIPROCESSOR || LOCKDEBUG */ /* Single softintr callback entry */ struct atppc_handler_node { void (*func)(void *); void * arg; SLIST_ENTRY(atppc_handler_node) entries; }; /* Generic structure to hold parallel port chipset info. */ struct atppc_softc { /* Generic device attributes */ struct device sc_dev; #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG) /* Simple lock */ struct simplelock sc_lock; #endif /* Machine independent bus infrastructure */ bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; bus_dma_tag_t sc_dmat; bus_dmamap_t sc_dmapt; bus_size_t sc_dma_maxsize; /* Child device */ struct device * child; /* Opaque handle used for interrupt handler establishment */ void * sc_ieh; /* List of soft interrupts to call */ SLIST_HEAD(handler_list, atppc_handler_node) sc_handler_listhead; /* Input buffer: working pointers, and size in bytes. */ char * sc_inb; char * sc_inbstart; u_int32_t sc_inb_nbytes; int sc_inerr; /* Output buffer pointer, working pointer, and size in bytes. */ char * sc_outb; char * sc_outbstart; u_int32_t sc_outb_nbytes; int sc_outerr; /* DMA functions: setup by bus specific attach code */ int (*sc_dma_start)(struct atppc_softc *, void *, u_int, u_int8_t); int (*sc_dma_finish)(struct atppc_softc *); int (*sc_dma_abort)(struct atppc_softc *); int (*sc_dma_malloc)(struct device *, caddr_t *, bus_addr_t *, bus_size_t); void (*sc_dma_free)(struct device *, caddr_t *, bus_addr_t *, bus_size_t); /* Microsequence related members */ char * sc_ptr; /* microseq current pointer */ int sc_accum; /* microseq accumulator */ /* Device attachment state */ #define ATPPC_ATTACHED 1 #define ATPPC_NOATTACH 0 u_int8_t sc_dev_ok; /* * Hardware capabilities flags: standard mode and nibble mode are * assumed to always be available since if they aren't you don't * HAVE a parallel port. */ #define ATPPC_HAS_INTR 0x01 /* Interrupt available */ #define ATPPC_HAS_DMA 0x02 /* DMA available */ #define ATPPC_HAS_FIFO 0x04 /* FIFO available */ #define ATPPC_HAS_PS2 0x08 /* PS2 mode capable */ #define ATPPC_HAS_ECP 0x10 /* ECP mode available */ #define ATPPC_HAS_EPP 0x20 /* EPP mode available */ u_int8_t sc_has; /* Chipset detected capabilities */ /* Flags specifying mode of chipset operation . */ #define ATPPC_MODE_STD 0x01 /* Use centronics-compatible mode */ #define ATPPC_MODE_PS2 0x02 /* Use PS2 mode */ #define ATPPC_MODE_EPP 0x04 /* Use EPP mode */ #define ATPPC_MODE_ECP 0x08 /* Use ECP mode */ #define ATPPC_MODE_NIBBLE 0x10 /* Use nibble mode */ #define ATPPC_MODE_FAST 0x20 /* Use Fast Centronics mode */ u_int8_t sc_mode; /* Current operational mode */ /* Flags which further define chipset operation */ #define ATPPC_USE_INTR 0x01 /* Use interrupts */ #define ATPPC_USE_DMA 0x02 /* Use DMA */ u_int8_t sc_use; /* Capabilities to use */ /* Parallel Port Chipset model. */ #define SMC_LIKE 0 #define SMC_37C665GT 1 #define SMC_37C666GT 2 #define NS_PC87332 3 #define NS_PC87306 4 #define INTEL_820191AA 5 /* XXX not implemented */ #define GENERIC 6 #define WINB_W83877F 7 #define WINB_W83877AF 8 #define WINB_UNKNOWN 9 #define NS_PC87334 10 #define SMC_37C935 11 #define NS_PC87303 12 u_int8_t sc_model; /* chipset model */ /* EPP mode */ #define ATPPC_EPP_1_9 0x0 #define ATPPC_EPP_1_7 0x1 u_int8_t sc_epp; /* Parallel Port Chipset Type. SMC versus GENERIC (others) */ #define ATPPC_TYPE_SMCLIKE 0 #define ATPPC_TYPE_GENERIC 1 u_int8_t sc_type; /* generic or smclike chipset type */ /* Stored register values after an interrupt occurs */ u_int8_t sc_ecr_intr; u_int8_t sc_ctr_intr; u_int8_t sc_str_intr; #define ATPPC_IRQ_NONE 0x0 #define ATPPC_IRQ_nACK 0x1 #define ATPPC_IRQ_DMA 0x2 #define ATPPC_IRQ_FIFO 0x4 #define ATPPC_IRQ_nFAULT 0x8 u_int8_t sc_irqstat; /* Record irq settings */ #define ATPPC_DMA_INIT 0x01 #define ATPPC_DMA_STARTED 0x02 #define ATPPC_DMA_COMPLETE 0x03 #define ATPPC_DMA_INTERRUPTED 0x04 #define ATPPC_DMA_ERROR 0x05 u_int8_t sc_dmastat; /* Record dma state */ #define ATPPC_PWORD_MASK 0x30 #define ATPPC_PWORD_16 0x00 #define ATPPC_PWORD_8 0x10 #define ATPPC_PWORD_32 0x20 u_int8_t sc_pword; /* PWord size: used for FIFO DMA transfers */ u_int8_t sc_fifo; /* FIFO size */ /* Indicates number of PWords in FIFO queues that generate interrupt */ u_int8_t sc_wthr; /* writeIntrThresold */ u_int8_t sc_rthr; /* readIntrThresold */ }; #ifdef _KERNEL /* Function prototypes */ /* Soft config attach/detach routines */ void atppc_sc_attach __P((struct atppc_softc *)); int atppc_sc_detach __P((struct atppc_softc *, int)); /* Detection routines */ int atppc_detect_port __P((bus_space_tag_t, bus_space_handle_t)); /* Interrupt handler for atppc device */ int atppcintr __P((void *)); #endif /* _KERNEL */ #endif /* __ATPPCVAR_H */