/* $NetBSD: espvar.h,v 1.7 1995/11/03 16:47:46 pk Exp $ */ /* * Copyright (c) 1994 Peter Galbavy. All rights reserved. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Peter Galbavy. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #define ESP_SYNC_REQ_ACK_OFS 0 #define ESP_DEBUG 0 #define FREQTOCCF(freq) (((freq + 4) / 5)) #define ESP_DEF_TIMEOUT 153 /* esp revisions */ #define ESP100 0x01 #define ESP100A 0x02 #define ESP200 0x03 /* Grabbed from Julians SCSI aha-drivers */ #ifdef DDB int Debugger(); #else DDB #define Debugger() panic("should call debugger here (esp.c)") #endif DDB typedef caddr_t physaddr; struct esp_dma_seg { physaddr addr; long len; }; extern int delaycount; #define FUDGE(X) ((X)>>1) /* get 1 ms spincount */ #define MINIFUDGE(X) ((X)>>4) /* get (approx) 125us spincount */ #define NUM_CONCURRENT 7 /* Only one per target for now */ /* * ECB. Holds additional information for each SCSI command Comments: We * need a separate scsi command block because we may need to overwrite it * with a request sense command. Basicly, we refrain from fiddling with * the scsi_xfer struct (except do the expected updating of return values). * We'll generally update: xs->{flags,resid,error,sense,status} and * occasionally xs->retries. */ struct ecb { TAILQ_ENTRY(ecb) chain; struct scsi_xfer *xs; /* SCSI xfer ctrl block from above */ int flags; /* Status */ #define ECB_QNONE 0 #define ECB_QFREE 1 #define ECB_QREADY 2 #define ECB_QNEXUS 3 #define ECB_QBITS 0x07 #define ECB_CHKSENSE 0x08 #define ECB_ABORTED 0x10 #define ECB_SETQ(e, q) do (e)->flags = ((e)->flags&~ECB_QBITS)|(q); while(0) struct scsi_generic cmd; /* SCSI command block */ int clen; char *daddr; /* Saved data pointer */ int dleft; /* Residue */ u_char stat; /* SCSI status byte */ }; /* * Some info about each (possible) target on the SCSI bus. This should * probably have been a "per target+lunit" structure, but we'll leave it at * this for now. Is there a way to reliably hook it up to sc->fordriver?? */ struct esp_tinfo { int cmds; /* #commands processed */ int dconns; /* #disconnects */ int touts; /* #timeouts */ int perrs; /* #parity errors */ int senses; /* #request sense commands sent */ ushort lubusy; /* What local units/subr. are busy? */ u_char flags; #define NEED_TO_RESET 0x01 /* Should send a BUS_DEV_RESET */ #define DO_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */ #define TARGET_BUSY 0x04 /* Target is busy, i.e. cmd in progress */ #define T_XXX 0x08 /* Target is XXX */ u_char period; /* Period suggestion */ u_char offset; /* Offset suggestion */ } tinfo_t; /* Register a linenumber (for debugging) */ #define LOGLINE(p) #define ESP_SHOWECBS 0x01 #define ESP_SHOWINTS 0x02 #define ESP_SHOWCMDS 0x04 #define ESP_SHOWMISC 0x08 #define ESP_SHOWTRAC 0x10 #define ESP_SHOWSTART 0x20 #define ESP_SHOWPHASE 0x40 #define ESP_SHOWDMA 0x80 #define ESP_SHOWCCMDS 0x100 #define ESP_SHOWMSGS 0x200 #ifdef ESP_DEBUG extern int esp_debug; #define ESP_ECBS(str) do {if (esp_debug & ESP_SHOWECBS) printf str;} while (0) #define ESP_MISC(str) do {if (esp_debug & ESP_SHOWMISC) printf str;} while (0) #define ESP_INTS(str) do {if (esp_debug & ESP_SHOWINTS) printf str;} while (0) #define ESP_TRACE(str) do {if (esp_debug & ESP_SHOWTRAC) printf str;} while (0) #define ESP_CMDS(str) do {if (esp_debug & ESP_SHOWCMDS) printf str;} while (0) #define ESP_START(str) do {if (esp_debug & ESP_SHOWSTART) printf str;}while (0) #define ESP_PHASE(str) do {if (esp_debug & ESP_SHOWPHASE) printf str;}while (0) #define ESP_DMA(str) do {if (esp_debug & ESP_SHOWDMA) printf str;}while (0) #define ESP_MSGS(str) do {if (esp_debug & ESP_SHOWMSGS) printf str;}while (0) #else #define ESP_ECBS(str) #define ESP_MISC(str) #define ESP_INTS(str) #define ESP_TRACE(str) #define ESP_CMDS(str) #define ESP_START(str) #define ESP_PHASE(str) #define ESP_DMA(str) #endif #define ESP_MAX_MSG_LEN 8 struct esp_softc { struct device sc_dev; /* us as a device */ struct sbusdev sc_sd; /* sbus device */ struct intrhand sc_ih; /* intr handler */ struct evcnt sc_intrcnt; /* intr count */ struct scsi_link sc_link; /* scsi lint struct */ volatile caddr_t sc_reg; /* the registers */ struct dma_softc *sc_dma; /* pointer to my dma */ /* register defaults */ u_char sc_cfg1; /* Config 1 */ u_char sc_cfg2; /* Config 2, not ESP100 */ u_char sc_cfg3; /* Config 3, only ESP200 */ u_char sc_ccf; /* Clock Conversion */ u_char sc_timeout; /* register copies, see espreadregs() */ u_char sc_espintr; u_char sc_espstat; u_char sc_espstep; u_char sc_espfflags; /* Lists of command blocks */ TAILQ_HEAD(ecb_list, ecb) free_list, ready_list, nexus_list; struct ecb *sc_nexus; /* current command */ struct ecb sc_ecb[8]; /* one per target */ struct esp_tinfo sc_tinfo[8]; /* Data about the current nexus (updated for every cmd switch) */ caddr_t sc_dp; /* Current data pointer */ ssize_t sc_dleft; /* Data left to transfer */ /* Adapter state */ int sc_phase; /* Copy of what bus phase we are in */ int sc_prevphase; /* Copy of what bus phase we were in */ u_char sc_state; /* State applicable to the adapter */ u_char sc_flags; u_char sc_selid; u_char sc_lastcmd; /* Message stuff */ char sc_msgpriq; /* One or more messages to send (encoded) */ char sc_msgout; /* What message is on its way out? */ char sc_omess[ESP_MAX_MSG_LEN]; caddr_t sc_omp; /* Message pointer (for multibyte messages) */ size_t sc_omlen; char sc_imess[ESP_MAX_MSG_LEN + 1]; caddr_t sc_imp; /* Message pointer (for multibyte messages) */ size_t sc_imlen; /* hardware/openprom stuff */ int sc_node; /* PROM node ID */ int sc_freq; /* Freq in HZ */ int sc_pri; /* SBUS priority */ int sc_id; /* our scsi id */ int sc_rev; /* esp revision */ int sc_minsync; /* minimum sync period / 4 */ }; /* values for sc_state */ #define ESP_IDLE 0x01 /* waiting for something to do */ #define ESP_TMP_UNAVAIL 0x02 /* Don't accept SCSI commands */ #define ESP_SELECTING 0x03 /* SCSI command is arbiting */ #define ESP_RESELECTED 0x04 /* Has been reselected */ #define ESP_HASNEXUS 0x05 /* Actively using the SCSI bus */ #define ESP_CLEANING 0x06 #define ESP_SBR 0x07 /* Expect a SCSI RST because we commanded it */ /* values for sc_flags */ #define ESP_DROP_MSGI 0x01 /* Discard all msgs (parity err detected) */ #define ESP_DOINGDMA 0x02 /* The FIFO data path is active! */ #define ESP_BUSFREE_OK 0x04 /* Bus free phase is OK. */ #define ESP_SYNCHNEGO 0x08 /* Synch negotiation in progress. */ #define ESP_BLOCKED 0x10 /* Don't schedule new scsi bus operations */ #define ESP_ABORTING 0x20 /* Bailing out */ /* values for sc_msgout */ #define SEND_DEV_RESET 0x01 #define SEND_PARITY_ERROR 0x02 #define SEND_ABORT 0x04 #define SEND_REJECT 0x08 #define SEND_INIT_DET_ERR 0x10 #define SEND_IDENTIFY 0x20 #define SEND_SDTR 0x40 /* * Generic SCSI messages. For now we reject most of them. */ /* Messages (1 byte) */ /* I/T M(andatory) or (O)ptional */ #define MSG_CMDCOMPLETE 0x00 /* M/M */ #define MSG_EXTENDED 0x01 /* O/O */ #define MSG_SAVEDATAPOINTER 0x02 /* O/O */ #define MSG_RESTOREPOINTERS 0x03 /* O/O */ #define MSG_DISCONNECT 0x04 /* O/O */ #define MSG_INITIATOR_DET_ERR 0x05 /* M/M */ #define MSG_ABORT 0x06 /* O/M */ #define MSG_MESSAGE_REJECT 0x07 /* M/M */ #define MSG_NOOP 0x08 /* M/M */ #define MSG_PARITY_ERR 0x09 /* M/M */ #define MSG_LINK_CMD_COMPLETE 0x0a /* O/O */ #define MSG_LINK_CMD_COMPLETEF 0x0b /* O/O */ #define MSG_BUS_DEV_RESET 0x0c /* O/M */ #define MSG_ABORT_TAG 0x0d /* O/O */ #define MSG_CLEAR_QUEUE 0x0e /* O/O */ #define MSG_INIT_RECOVERY 0x0f /* O/O */ #define MSG_REL_RECOVERY 0x10 /* O/O */ #define MSG_TERM_IO_PROC 0x11 /* O/O */ /* Messages (2 byte) */ #define MSG_SIMPLE_Q_TAG 0x20 /* O/O */ #define MSG_HEAD_OF_Q_TAG 0x21 /* O/O */ #define MSG_ORDERED_Q_TAG 0x22 /* O/O */ #define MSG_IGN_WIDE_RESIDUE 0x23 /* O/O */ /* Identify message */ #define ESP_MSG_IDENTIFY(lun) (0x80|(lun & 0x7)) /* XXX 0xc0=selection on */ #define ESP_MSG_ISIDENT(m) ((m) & 0x80) /* Extended messages (opcode) */ #define MSG_EXT_SDTR 0x01 /* SCSI Status codes */ #define ST_GOOD 0x00 #define ST_CHKCOND 0x02 #define ST_CONDMET 0x04 #define ST_BUSY 0x08 #define ST_INTERMED 0x10 #define ST_INTERMED_CONDMET 0x14 #define ST_RESERVATION_CONFLICT 0x18 #define ST_CMD_TERM 0x22 #define ST_QUEUE_FULL 0x28 #define ST_MASK 0x3e /* bit 0,6,7 is reserved */ /* phase bits */ #define IOI 0x01 #define CDI 0x02 #define MSGI 0x04 /* Information transfer phases */ #define DATA_OUT_PHASE (0) #define DATA_IN_PHASE (IOI) #define COMMAND_PHASE (CDI) #define STATUS_PHASE (CDI|IOI) #define MESSAGE_OUT_PHASE (MSGI|CDI) #define MESSAGE_IN_PHASE (MSGI|CDI|IOI) #define PHASE_MASK (MSGI|CDI|IOI) /* Some pseudo phases for getphase()*/ #define BUSFREE_PHASE 0x100 /* Re/Selection no longer valid */ #define INVALID_PHASE 0x101 /* Re/Selection valid, but no REQ yet */ #define PSEUDO_PHASE 0x100 /* "pseudo" bit */ #ifdef ESP_DEBUG #define ESPCMD(sc, cmd) do { \ if (esp_debug & ESP_SHOWCCMDS) \ printf("", (unsigned)cmd); \ sc->sc_lastcmd = cmd; \ sc->sc_reg[ESP_CMD] = (unsigned)cmd; \ } while (0) #else #define ESPCMD(sc, cmd) sc->sc_reg[ESP_CMD] = (unsigned)cmd #endif #define SAME_ESP(sc, bp, ca) \ ((bp->val[0] == ca->ca_slot && bp->val[1] == ca->ca_offset) || \ (bp->val[0] == -1 && bp->val[1] == sc->sc_dev.dv_unit)) #define TARGETNAME(ecb) \ ((struct device *)ecb->xs->sc_link->adapter_softc)->dv_xname /* DMA macros for ESP */ #define DMA_ENINTR(r) ((r->enintr)(r)) #define DMA_ISINTR(r) ((r->isintr)(r)) #define DMA_RESET(r) ((r->reset)(r)) #define DMA_START(a, b, c, d) ((a->start)(a, b, c, d)) #define DMA_INTR(r) ((r->intr)(r)) #define DMA_DRAIN(sc) if (sc->sc_rev < DMAREV_2) { \ DMACSR(sc) |= D_DRAIN; \ DMAWAIT1(sc); \ }