/* $NetBSD: uhub.c,v 1.140 2018/10/19 00:33:27 manu Exp $ */ /* $FreeBSD: src/sys/dev/usb/uhub.c,v 1.18 1999/11/17 22:33:43 n_hibma Exp $ */ /* $OpenBSD: uhub.c,v 1.86 2015/06/29 18:27:40 mpi Exp $ */ /* * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * USB spec: http://www.usb.org/developers/docs/usbspec.zip */ #include __KERNEL_RCSID(0, "$NetBSD: uhub.c,v 1.140 2018/10/19 00:33:27 manu Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef USB_DEBUG #ifndef UHUB_DEBUG #define uhubdebug 0 #else static int uhubdebug = 0; SYSCTL_SETUP(sysctl_hw_uhub_setup, "sysctl hw.uhub setup") { int err; const struct sysctlnode *rnode; const struct sysctlnode *cnode; err = sysctl_createv(clog, 0, NULL, &rnode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "uhub", SYSCTL_DESCR("uhub global controls"), NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); if (err) goto fail; /* control debugging printfs */ err = sysctl_createv(clog, 0, &rnode, &cnode, CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, "debug", SYSCTL_DESCR("Enable debugging output"), NULL, 0, &uhubdebug, sizeof(uhubdebug), CTL_CREATE, CTL_EOL); if (err) goto fail; return; fail: aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); } #endif /* UHUB_DEBUG */ #endif /* USB_DEBUG */ #define DPRINTF(FMT,A,B,C,D) USBHIST_LOGN(uhubdebug,1,FMT,A,B,C,D) #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(uhubdebug,N,FMT,A,B,C,D) #define UHUBHIST_FUNC() USBHIST_FUNC() #define UHUBHIST_CALLED(name) USBHIST_CALLED(uhubdebug) struct uhub_softc { device_t sc_dev; /* base device */ struct usbd_device *sc_hub; /* USB device */ int sc_proto; /* device protocol */ struct usbd_pipe *sc_ipipe; /* interrupt pipe */ kmutex_t sc_lock; uint8_t *sc_statusbuf; uint8_t *sc_statuspend; uint8_t *sc_status; size_t sc_statuslen; bool sc_explorepending; bool sc_first_explore; bool sc_running; }; #define UHUB_IS_HIGH_SPEED(sc) \ ((sc)->sc_proto == UDPROTO_HSHUBSTT || (sc)->sc_proto == UDPROTO_HSHUBMTT) #define UHUB_IS_SINGLE_TT(sc) ((sc)->sc_proto == UDPROTO_HSHUBSTT) #define PORTSTAT_ISSET(sc, port) \ ((sc)->sc_status[(port) / 8] & (1 << ((port) % 8))) Static usbd_status uhub_explore(struct usbd_device *); Static void uhub_intr(struct usbd_xfer *, void *, usbd_status); /* * We need two attachment points: * hub to usb and hub to hub * Every other driver only connects to hubs */ int uhub_match(device_t, cfdata_t, void *); void uhub_attach(device_t, device_t, void *); int uhub_rescan(device_t, const char *, const int *); void uhub_childdet(device_t, device_t); int uhub_detach(device_t, int); extern struct cfdriver uhub_cd; CFATTACH_DECL3_NEW(uhub, sizeof(struct uhub_softc), uhub_match, uhub_attach, uhub_detach, NULL, uhub_rescan, uhub_childdet, DVF_DETACH_SHUTDOWN); CFATTACH_DECL3_NEW(uroothub, sizeof(struct uhub_softc), uhub_match, uhub_attach, uhub_detach, NULL, uhub_rescan, uhub_childdet, DVF_DETACH_SHUTDOWN); /* * Setting this to 1 makes sure than an uhub attaches even at higher * priority than ugen when ugen_override is set to 1. This allows to * probe the whole USB bus and attach functions with ugen. */ int uhub_ubermatch = 0; static usbd_status usbd_get_hub_desc(struct usbd_device *dev, usb_hub_descriptor_t *hd, int speed) { usb_device_request_t req; usbd_status err; int nports; UHUBHIST_FUNC(); UHUBHIST_CALLED(); /* don't issue UDESC_HUB to SS hub, or it would stall */ if (dev->ud_depth != 0 && USB_IS_SS(dev->ud_speed)) { usb_hub_ss_descriptor_t hssd; int rmvlen; memset(&hssd, 0, sizeof(hssd)); req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_SS_HUB, 0); USETW(req.wIndex, 0); USETW(req.wLength, USB_HUB_SS_DESCRIPTOR_SIZE); DPRINTFN(1, "getting sshub descriptor", 0, 0, 0, 0); err = usbd_do_request(dev, &req, &hssd); nports = hssd.bNbrPorts; if (dev->ud_depth != 0 && nports > UHD_SS_NPORTS_MAX) { DPRINTF("num of ports %jd exceeds maxports %jd", nports, UHD_SS_NPORTS_MAX, 0, 0); nports = hd->bNbrPorts = UHD_SS_NPORTS_MAX; } rmvlen = (nports + 7) / 8; hd->bDescLength = USB_HUB_DESCRIPTOR_SIZE + (rmvlen > 1 ? rmvlen : 1) - 1; memcpy(hd->DeviceRemovable, hssd.DeviceRemovable, rmvlen); hd->bDescriptorType = hssd.bDescriptorType; hd->bNbrPorts = hssd.bNbrPorts; hd->wHubCharacteristics[0] = hssd.wHubCharacteristics[0]; hd->wHubCharacteristics[1] = hssd.wHubCharacteristics[1]; hd->bPwrOn2PwrGood = hssd.bPwrOn2PwrGood; hd->bHubContrCurrent = hssd.bHubContrCurrent; } else { req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_HUB, 0); USETW(req.wIndex, 0); USETW(req.wLength, USB_HUB_DESCRIPTOR_SIZE); DPRINTFN(1, "getting hub descriptor", 0, 0, 0, 0); err = usbd_do_request(dev, &req, hd); nports = hd->bNbrPorts; if (!err && nports > 7) { USETW(req.wLength, USB_HUB_DESCRIPTOR_SIZE + (nports+1) / 8); err = usbd_do_request(dev, &req, hd); } } return err; } static usbd_status usbd_set_hub_depth(struct usbd_device *dev, int depth) { usb_device_request_t req; req.bmRequestType = UT_WRITE_CLASS_DEVICE; req.bRequest = UR_SET_HUB_DEPTH; USETW(req.wValue, depth); USETW(req.wIndex, 0); USETW(req.wLength, 0); return usbd_do_request(dev, &req, 0); } int uhub_match(device_t parent, cfdata_t match, void *aux) { struct usb_attach_arg *uaa = aux; int matchvalue; UHUBHIST_FUNC(); UHUBHIST_CALLED(); if (uhub_ubermatch) matchvalue = UMATCH_HIGHEST+1; else matchvalue = UMATCH_DEVCLASS_DEVSUBCLASS; DPRINTFN(5, "uaa=%#jx", (uintptr_t)uaa, 0, 0, 0); /* * The subclass for hubs seems to be 0 for some and 1 for others, * so we just ignore the subclass. */ if (uaa->uaa_class == UDCLASS_HUB) return matchvalue; return UMATCH_NONE; } void uhub_attach(device_t parent, device_t self, void *aux) { struct uhub_softc *sc = device_private(self); struct usb_attach_arg *uaa = aux; struct usbd_device *dev = uaa->uaa_device; char *devinfop; usbd_status err; struct usbd_hub *hub = NULL; usb_hub_descriptor_t hubdesc; int p, port, nports, nremov, pwrdly; struct usbd_interface *iface; usb_endpoint_descriptor_t *ed; struct usbd_tt *tts = NULL; config_pending_incr(self); UHUBHIST_FUNC(); UHUBHIST_CALLED(); sc->sc_dev = self; sc->sc_hub = dev; sc->sc_proto = uaa->uaa_proto; devinfop = usbd_devinfo_alloc(dev, 1); aprint_naive("\n"); aprint_normal(": %s\n", devinfop); usbd_devinfo_free(devinfop); if (dev->ud_depth > 0 && UHUB_IS_HIGH_SPEED(sc)) { aprint_normal_dev(self, "%s transaction translator%s\n", UHUB_IS_SINGLE_TT(sc) ? "single" : "multiple", UHUB_IS_SINGLE_TT(sc) ? "" : "s"); } err = usbd_set_config_index(dev, 0, 1); if (err) { DPRINTF("configuration failed, sc %#jx error %jd", (uintptr_t)sc, err, 0, 0); goto bad2; } if (dev->ud_depth > USB_HUB_MAX_DEPTH) { aprint_error_dev(self, "hub depth (%d) exceeded, hub ignored\n", USB_HUB_MAX_DEPTH); goto bad2; } /* Get hub descriptor. */ memset(&hubdesc, 0, sizeof(hubdesc)); err = usbd_get_hub_desc(dev, &hubdesc, dev->ud_speed); nports = hubdesc.bNbrPorts; if (err) { DPRINTF("getting hub descriptor failed, uhub%jd error %jd", device_unit(self), err, 0, 0); goto bad2; } for (nremov = 0, port = 1; port <= nports; port++) if (!UHD_NOT_REMOV(&hubdesc, port)) nremov++; aprint_verbose_dev(self, "%d port%s with %d removable, %s powered\n", nports, nports != 1 ? "s" : "", nremov, dev->ud_selfpowered ? "self" : "bus"); if (nports == 0) { aprint_debug_dev(self, "no ports, hub ignored\n"); goto bad; } hub = kmem_alloc(sizeof(*hub) + (nports-1) * sizeof(struct usbd_port), KM_SLEEP); dev->ud_hub = hub; dev->ud_hub->uh_hubsoftc = sc; hub->uh_explore = uhub_explore; hub->uh_hubdesc = hubdesc; if (USB_IS_SS(dev->ud_speed) && dev->ud_depth != 0) { aprint_debug_dev(self, "setting hub depth %u\n", dev->ud_depth - 1); err = usbd_set_hub_depth(dev, dev->ud_depth - 1); if (err) { aprint_error_dev(self, "can't set depth\n"); goto bad; } } /* Set up interrupt pipe. */ err = usbd_device2interface_handle(dev, 0, &iface); if (err) { aprint_error_dev(self, "no interface handle\n"); goto bad; } if (UHUB_IS_HIGH_SPEED(sc) && !UHUB_IS_SINGLE_TT(sc)) { err = usbd_set_interface(iface, 1); if (err) aprint_error_dev(self, "can't enable multiple TTs\n"); } ed = usbd_interface2endpoint_descriptor(iface, 0); if (ed == NULL) { aprint_error_dev(self, "no endpoint descriptor\n"); goto bad; } if ((ed->bmAttributes & UE_XFERTYPE) != UE_INTERRUPT) { aprint_error_dev(self, "bad interrupt endpoint\n"); goto bad; } sc->sc_statuslen = (nports + 1 + 7) / 8; sc->sc_statusbuf = kmem_alloc(sc->sc_statuslen, KM_SLEEP); sc->sc_statuspend = kmem_zalloc(sc->sc_statuslen, KM_SLEEP); sc->sc_status = kmem_alloc(sc->sc_statuslen, KM_SLEEP); mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); memset(sc->sc_statuspend, 0, sc->sc_statuslen); /* force initial scan */ memset(sc->sc_status, 0xff, sc->sc_statuslen); sc->sc_explorepending = true; err = usbd_open_pipe_intr(iface, ed->bEndpointAddress, USBD_SHORT_XFER_OK|USBD_MPSAFE, &sc->sc_ipipe, sc, sc->sc_statusbuf, sc->sc_statuslen, uhub_intr, USBD_DEFAULT_INTERVAL); if (err) { aprint_error_dev(self, "cannot open interrupt pipe\n"); goto bad; } /* Wait with power off for a while. */ usbd_delay_ms(dev, USB_POWER_DOWN_TIME); usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, dev, sc->sc_dev); /* * To have the best chance of success we do things in the exact same * order as Windows 98. This should not be necessary, but some * devices do not follow the USB specs to the letter. * * These are the events on the bus when a hub is attached: * Get device and config descriptors (see attach code) * Get hub descriptor (see above) * For all ports * turn on power * wait for power to become stable * (all below happens in explore code) * For all ports * clear C_PORT_CONNECTION * For all ports * get port status * if device connected * wait 100 ms * turn on reset * wait * clear C_PORT_RESET * get port status * proceed with device attachment */ if (UHUB_IS_HIGH_SPEED(sc) && nports > 0) { tts = kmem_alloc((UHUB_IS_SINGLE_TT(sc) ? 1 : nports) * sizeof(struct usbd_tt), KM_SLEEP); } /* Set up data structures */ for (p = 0; p < nports; p++) { struct usbd_port *up = &hub->uh_ports[p]; up->up_dev = NULL; up->up_parent = dev; up->up_portno = p + 1; if (dev->ud_selfpowered) /* Self powered hub, give ports maximum current. */ up->up_power = USB_MAX_POWER; else up->up_power = USB_MIN_POWER; up->up_restartcnt = 0; up->up_reattach = 0; if (UHUB_IS_HIGH_SPEED(sc)) { up->up_tt = &tts[UHUB_IS_SINGLE_TT(sc) ? 0 : p]; up->up_tt->utt_hub = hub; } else { up->up_tt = NULL; } } /* XXX should check for none, individual, or ganged power? */ pwrdly = dev->ud_hub->uh_hubdesc.bPwrOn2PwrGood * UHD_PWRON_FACTOR + USB_EXTRA_POWER_UP_TIME; for (port = 1; port <= nports; port++) { /* Turn the power on. */ err = usbd_set_port_feature(dev, port, UHF_PORT_POWER); if (err) aprint_error_dev(self, "port %d power on failed, %s\n", port, usbd_errstr(err)); DPRINTF("uhub%jd turn on port %jd power", device_unit(self), port, 0, 0); } /* Wait for stable power if we are not a root hub */ if (dev->ud_powersrc->up_parent != NULL) usbd_delay_ms(dev, pwrdly); /* The usual exploration will finish the setup. */ sc->sc_running = true; sc->sc_first_explore = true; if (!pmf_device_register(self, NULL, NULL)) aprint_error_dev(self, "couldn't establish power handler\n"); return; bad: if (sc->sc_status) kmem_free(sc->sc_status, sc->sc_statuslen); if (sc->sc_statuspend) kmem_free(sc->sc_statuspend, sc->sc_statuslen); if (sc->sc_statusbuf) kmem_free(sc->sc_statusbuf, sc->sc_statuslen); if (hub) kmem_free(hub, sizeof(*hub) + (nports-1) * sizeof(struct usbd_port)); dev->ud_hub = NULL; bad2: config_pending_decr(self); } usbd_status uhub_explore(struct usbd_device *dev) { usb_hub_descriptor_t *hd = &dev->ud_hub->uh_hubdesc; struct uhub_softc *sc = dev->ud_hub->uh_hubsoftc; struct usbd_port *up; usbd_status err; int speed; int port; int change, status, reconnect; UHUBHIST_FUNC(); UHUBHIST_CALLED(); DPRINTFN(10, "uhub%jd dev=%#jx addr=%jd speed=%ju", device_unit(sc->sc_dev), (uintptr_t)dev, dev->ud_addr, dev->ud_speed); if (!sc->sc_running) return USBD_NOT_STARTED; /* Ignore hubs that are too deep. */ if (dev->ud_depth > USB_HUB_MAX_DEPTH) return USBD_TOO_DEEP; if (PORTSTAT_ISSET(sc, 0)) { /* hub status change */ usb_hub_status_t hs; err = usbd_get_hub_status(dev, &hs); if (err) { DPRINTF("uhub%jd get hub status failed, err %jd", device_unit(sc->sc_dev), err, 0, 0); } else { /* just acknowledge */ status = UGETW(hs.wHubStatus); change = UGETW(hs.wHubChange); DPRINTF("uhub%jd s/c=%jx/%jx", device_unit(sc->sc_dev), status, change, 0); if (change & UHS_LOCAL_POWER) usbd_clear_hub_feature(dev, UHF_C_HUB_LOCAL_POWER); if (change & UHS_OVER_CURRENT) usbd_clear_hub_feature(dev, UHF_C_HUB_OVER_CURRENT); } } for (port = 1; port <= hd->bNbrPorts; port++) { up = &dev->ud_hub->uh_ports[port - 1]; /* reattach is needed after firmware upload */ reconnect = up->up_reattach; up->up_reattach = 0; status = change = 0; /* don't check if no change summary notification */ if (PORTSTAT_ISSET(sc, port) || reconnect) { err = usbd_get_port_status(dev, port, &up->up_status); if (err) { DPRINTF("uhub%jd get port stat failed, err %jd", device_unit(sc->sc_dev), err, 0, 0); continue; } status = UGETW(up->up_status.wPortStatus); change = UGETW(up->up_status.wPortChange); DPRINTF("uhub%jd port %jd: s/c=%jx/%jx", device_unit(sc->sc_dev), port, status, change); } if (!change && !reconnect) { /* No status change, just do recursive explore. */ if (up->up_dev != NULL && up->up_dev->ud_hub != NULL) up->up_dev->ud_hub->uh_explore(up->up_dev); continue; } if (change & UPS_C_PORT_ENABLED) { DPRINTF("uhub%jd port %jd C_PORT_ENABLED", device_unit(sc->sc_dev), port, 0, 0); usbd_clear_port_feature(dev, port, UHF_C_PORT_ENABLE); if (change & UPS_C_CONNECT_STATUS) { /* Ignore the port error if the device vanished. */ } else if (status & UPS_PORT_ENABLED) { aprint_error_dev(sc->sc_dev, "illegal enable change, port %d\n", port); } else { /* Port error condition. */ if (up->up_restartcnt) /* no message first time */ aprint_error_dev(sc->sc_dev, "port error, restarting port %d\n", port); if (up->up_restartcnt++ < USBD_RESTART_MAX) goto disco; else aprint_error_dev(sc->sc_dev, "port error, giving up port %d\n", port); } } if (change & UPS_C_PORT_RESET) { /* * some xHCs set PortResetChange instead of CSC * when port is reset. */ if ((status & UPS_CURRENT_CONNECT_STATUS) != 0) { change |= UPS_C_CONNECT_STATUS; } usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET); } if (change & UPS_C_BH_PORT_RESET) { /* * some xHCs set WarmResetChange instead of CSC * when port is reset. */ if ((status & UPS_CURRENT_CONNECT_STATUS) != 0) { change |= UPS_C_CONNECT_STATUS; } usbd_clear_port_feature(dev, port, UHF_C_BH_PORT_RESET); } if (change & UPS_C_PORT_LINK_STATE) usbd_clear_port_feature(dev, port, UHF_C_PORT_LINK_STATE); if (change & UPS_C_PORT_CONFIG_ERROR) usbd_clear_port_feature(dev, port, UHF_C_PORT_CONFIG_ERROR); /* XXX handle overcurrent and resume events! */ if (!reconnect && !(change & UPS_C_CONNECT_STATUS)) { /* No status change, just do recursive explore. */ if (up->up_dev != NULL && up->up_dev->ud_hub != NULL) up->up_dev->ud_hub->uh_explore(up->up_dev); continue; } /* We have a connect status change, handle it. */ DPRINTF("uhub%jd status change port %jd", device_unit(sc->sc_dev), port, 0, 0); usbd_clear_port_feature(dev, port, UHF_C_PORT_CONNECTION); /* * If there is already a device on the port the change status * must mean that is has disconnected. Looking at the * current connect status is not enough to figure this out * since a new unit may have been connected before we handle * the disconnect. */ disco: if (up->up_dev != NULL) { /* Disconnected */ DPRINTF("uhub%jd device addr=%jd disappeared on " "port %jd", device_unit(sc->sc_dev), up->up_dev->ud_addr, port, 0); usb_disconnect_port(up, sc->sc_dev, DETACH_FORCE); usbd_clear_port_feature(dev, port, UHF_C_PORT_CONNECTION); } if (!(status & UPS_CURRENT_CONNECT_STATUS)) { /* Nothing connected, just ignore it. */ DPRINTFN(3, "uhub%jd port %jd !CURRENT_CONNECT_STATUS", device_unit(sc->sc_dev), port, 0, 0); usb_disconnect_port(up, sc->sc_dev, DETACH_FORCE); usbd_clear_port_feature(dev, port, UHF_C_PORT_CONNECTION); continue; } /* Connected */ DPRINTF("unit %jd dev->speed=%ju dev->depth=%ju", device_unit(sc->sc_dev), dev->ud_speed, dev->ud_depth, 0); /* Wait for maximum device power up time. */ usbd_delay_ms(dev, USB_PORT_POWERUP_DELAY); /* Reset port, which implies enabling it. */ if (usbd_reset_port(dev, port, &up->up_status)) { aprint_error_dev(sc->sc_dev, "port %d reset failed\n", port); continue; } #if 0 /* Get port status again, it might have changed during reset */ err = usbd_get_port_status(dev, port, &up->up_status); if (err) { DPRINTF("uhub%jd port %jd get port status failed, " "err %jd", device_unit(sc->sc_dev), port, err, 0); continue; } #endif /* * Use the port status from the reset to check for the device * disappearing, the port enable status, and the port speed */ status = UGETW(up->up_status.wPortStatus); change = UGETW(up->up_status.wPortChange); DPRINTF("uhub%jd port %jd after reset: s/c=%jx/%jx", device_unit(sc->sc_dev), port, status, change); if (!(status & UPS_CURRENT_CONNECT_STATUS)) { /* Nothing connected, just ignore it. */ #ifdef DIAGNOSTIC aprint_debug_dev(sc->sc_dev, "port %d, device disappeared after reset\n", port); #endif continue; } if (!(status & UPS_PORT_ENABLED)) { /* Not allowed send/receive packet. */ #ifdef DIAGNOSTIC printf("%s: port %d, device not enabled\n", device_xname(sc->sc_dev), port); #endif continue; } /* port reset may cause Warm Reset Change, drop it. */ if (change & UPS_C_BH_PORT_RESET) usbd_clear_port_feature(dev, port, UHF_C_BH_PORT_RESET); /* * Figure out device speed from power bit of port status. * USB 2.0 ch 11.24.2.7.1 * USB 3.1 ch 10.16.2.6.1 */ int sts = status; if ((sts & UPS_PORT_POWER) == 0) sts &= ~UPS_PORT_POWER_SS; if (sts & UPS_HIGH_SPEED) speed = USB_SPEED_HIGH; else if (sts & UPS_LOW_SPEED) speed = USB_SPEED_LOW; else { /* * If there is no power bit set, it is certainly * a Super Speed device, so use the speed of its * parent hub. */ if (sts & UPS_PORT_POWER) speed = USB_SPEED_FULL; else speed = dev->ud_speed; } /* * Reduce the speed, otherwise we won't setup the proper * transfer methods. */ if (speed > dev->ud_speed) speed = dev->ud_speed; DPRINTF("uhub%jd speed %ju", device_unit(sc->sc_dev), speed, 0, 0); /* * To check whether port has power, * check UPS_PORT_POWER_SS bit if port speed is SS, and * check UPS_PORT_POWER bit if port speed is HS/FS/LS. */ if (USB_IS_SS(speed)) { /* SS hub port */ if (!(status & UPS_PORT_POWER_SS)) aprint_normal_dev(sc->sc_dev, "strange, connected port %d has no power\n", port); } else { /* HS/FS/LS hub port */ if (!(status & UPS_PORT_POWER)) aprint_normal_dev(sc->sc_dev, "strange, connected port %d has no power\n", port); } /* Get device info and set its address. */ err = usbd_new_device(sc->sc_dev, dev->ud_bus, dev->ud_depth + 1, speed, port, up); /* XXX retry a few times? */ if (err) { DPRINTF("usbd_new_device failed, error %jd", err, 0, 0, 0); /* Avoid addressing problems by disabling. */ /* usbd_reset_port(dev, port, &up->status); */ /* * The unit refused to accept a new address, or had * some other serious problem. Since we cannot leave * at 0 we have to disable the port instead. */ aprint_error_dev(sc->sc_dev, "device problem, disabling port %d\n", port); usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE); } else { /* The port set up succeeded, reset error count. */ up->up_restartcnt = 0; if (up->up_dev->ud_hub) up->up_dev->ud_hub->uh_explore(up->up_dev); } } mutex_enter(&sc->sc_lock); sc->sc_explorepending = false; for (int i = 0; i < sc->sc_statuslen; i++) { if (sc->sc_statuspend[i] != 0) { memcpy(sc->sc_status, sc->sc_statuspend, sc->sc_statuslen); memset(sc->sc_statuspend, 0, sc->sc_statuslen); usb_needs_explore(sc->sc_hub); break; } } mutex_exit(&sc->sc_lock); if (sc->sc_first_explore) { config_pending_decr(sc->sc_dev); sc->sc_first_explore = false; } return USBD_NORMAL_COMPLETION; } /* * Called from process context when the hub is gone. * Detach all devices on active ports. */ int uhub_detach(device_t self, int flags) { struct uhub_softc *sc = device_private(self); struct usbd_hub *hub = sc->sc_hub->ud_hub; struct usbd_port *rup; int nports, port, rc; UHUBHIST_FUNC(); UHUBHIST_CALLED(); DPRINTF("uhub%jd flags=%jd", device_unit(self), flags, 0, 0); if (hub == NULL) /* Must be partially working */ return 0; /* XXXSMP usb */ KERNEL_LOCK(1, curlwp); nports = hub->uh_hubdesc.bNbrPorts; for (port = 1; port <= nports; port++) { rup = &hub->uh_ports[port - 1]; if (rup->up_dev == NULL) continue; if ((rc = usb_disconnect_port(rup, self, flags)) != 0) { /* XXXSMP usb */ KERNEL_UNLOCK_ONE(curlwp); return rc; } } pmf_device_deregister(self); usbd_abort_pipe(sc->sc_ipipe); usbd_close_pipe(sc->sc_ipipe); usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_hub, sc->sc_dev); if (hub->uh_ports[0].up_tt) kmem_free(hub->uh_ports[0].up_tt, (UHUB_IS_SINGLE_TT(sc) ? 1 : nports) * sizeof(struct usbd_tt)); kmem_free(hub, sizeof(*hub) + (nports-1) * sizeof(struct usbd_port)); sc->sc_hub->ud_hub = NULL; if (sc->sc_status) kmem_free(sc->sc_status, sc->sc_statuslen); if (sc->sc_statuspend) kmem_free(sc->sc_statuspend, sc->sc_statuslen); if (sc->sc_statusbuf) kmem_free(sc->sc_statusbuf, sc->sc_statuslen); mutex_destroy(&sc->sc_lock); /* XXXSMP usb */ KERNEL_UNLOCK_ONE(curlwp); return 0; } int uhub_rescan(device_t self, const char *ifattr, const int *locators) { struct uhub_softc *sc = device_private(self); struct usbd_hub *hub = sc->sc_hub->ud_hub; struct usbd_device *dev; int port; for (port = 1; port <= hub->uh_hubdesc.bNbrPorts; port++) { dev = hub->uh_ports[port - 1].up_dev; if (dev == NULL) continue; usbd_reattach_device(sc->sc_dev, dev, port, locators); } return 0; } /* Called when a device has been detached from it */ void uhub_childdet(device_t self, device_t child) { struct uhub_softc *sc = device_private(self); struct usbd_device *devhub = sc->sc_hub; struct usbd_device *dev; int nports; int port; int i; if (!devhub->ud_hub) /* should never happen; children are only created after init */ panic("hub not fully initialised, but child deleted?"); nports = devhub->ud_hub->uh_hubdesc.bNbrPorts; for (port = 1; port <= nports; port++) { dev = devhub->ud_hub->uh_ports[port - 1].up_dev; if (!dev || dev->ud_subdevlen == 0) continue; for (i = 0; i < dev->ud_subdevlen; i++) { if (dev->ud_subdevs[i] == child) { dev->ud_subdevs[i] = NULL; dev->ud_nifaces_claimed--; } } if (dev->ud_nifaces_claimed == 0) { kmem_free(dev->ud_subdevs, dev->ud_subdevlen * sizeof(device_t)); dev->ud_subdevs = NULL; dev->ud_subdevlen = 0; } } } /* * Hub interrupt. * This an indication that some port has changed status. * Notify the bus event handler thread that we need * to be explored again. */ void uhub_intr(struct usbd_xfer *xfer, void *addr, usbd_status status) { struct uhub_softc *sc = addr; UHUBHIST_FUNC(); UHUBHIST_CALLED(); DPRINTFN(5, "uhub%jd", device_unit(sc->sc_dev), 0, 0, 0); if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->sc_ipipe); else if (status == USBD_NORMAL_COMPLETION) { mutex_enter(&sc->sc_lock); DPRINTFN(5, "uhub%jd: explore pending %jd", device_unit(sc->sc_dev), sc->sc_explorepending, 0, 0); /* merge port bitmap into pending interrupts list */ for (size_t i = 0; i < sc->sc_statuslen; i++) { sc->sc_statuspend[i] |= sc->sc_statusbuf[i]; DPRINTFN(5, "uhub%jd: pending/new ports " "[%jd] %#jx/%#jx", device_unit(sc->sc_dev), i, sc->sc_statuspend[i], sc->sc_statusbuf[i]); } if (!sc->sc_explorepending) { sc->sc_explorepending = true; memcpy(sc->sc_status, sc->sc_statuspend, sc->sc_statuslen); memset(sc->sc_statuspend, 0, sc->sc_statuslen); for (size_t i = 0; i < sc->sc_statuslen; i++) { DPRINTFN(5, "uhub%jd: exploring ports " "[%jd] %#jx", device_unit(sc->sc_dev), i, sc->sc_status[i], 0); } usb_needs_explore(sc->sc_hub); } mutex_exit(&sc->sc_lock); } }