# $NetBSD: DRACO,v 1.38 1999/06/18 05:58:48 is Exp $ # # This file was automatically created. Changes will be # lost when running make in this directory. # # Created from: #$ NetBSD: GENERIC,v 1.126 1999/06/18 05:58:25 is Exp $ include "arch/amiga/conf/std.amiga" maxusers 8 options RTC_OFFSET=0 #mainboards to support (in addition to Amiga) options DRACO #processors this kernel should support options M68060 # support for 060 options M060SP # MC68060 software support (Required for 060) #Networking options options INET # IP networking support (Required) #options GATEWAY # Packet forwarding #options DIRECTED_BROADCAST # Broadcast across subnets #options MROUTING # Multicast routing options NS # XNS #options NSIP # XNS tunneling over IP options ISO,TPIP # OSI options EON # OSI tunneling over IP options CCITT,LLC,HDLC # X.25 options NETATALK # AppleTalk networking protocols options PPP_BSDCOMP # BSD-Compress compression support for PPP options PPP_DEFLATE # Deflate compression support for PPP options PPP_FILTER # Active filter support for PPP (requires bpf) options PFIL_HOOKS # pfil(9) packet filter hooks options IPFILTER_LOG # ipmon(8) log support file-system FFS # Berkeley fast file system file-system EXT2FS # second extended file system (linux) #file-system LFS # log-structured filesystem (experimental) file-system MFS # Memory based filesystem file-system NFS # Network File System client side code file-system ADOSFS # AmigaDOS file system file-system CD9660 # ISO 9660 + Rock Ridge filesystem file-system MSDOSFS # MS-DOS filesystem file-system FDESC # user file descriptor filesystem file-system KERNFS # kernel data-structure filesystem file-system NULLFS # loopback filesystem #file-system PORTAL # Portal filesystem file-system PROCFS # /proc filesystem file-system UMAPFS # NULLFS + uid and gid remapping file-system UNION # union filesystem #Filesystem options options QUOTA # User and group quotas in FFS #options FFS_EI # FFS Endian Independant support options NFSSERVER # Network File System server side code #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. #Compatability options for various existing systems options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP options COMPAT_43 # compatibility with 4.3BSD interfaces options COMPAT_09 # compatibility with NetBSD 0.9 options COMPAT_10 # compatibility with NetBSD 1.0 options COMPAT_12 # compatibility with NetBSD 1.2 options COMPAT_13 # compatibility with NetBSD 1.3 options COMPAT_SUNOS # Support to run Sun (m68k) executables options COMPAT_SVR4 # Support to run SVR4 (m68k) executables options COMPAT_NOMID # allow nonvalid machine id executables #options COMPAT_LINUX # Support to run Linux/m68k executables options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) #Support for System V IPC facilities. options SYSVSHM # System V-like shared memory options SYSVMSG # System V-like messages options SYSVSEM # System V-like semaphores #Support for various kernel options options KTRACE # system call tracing support options LKM # Loadable kernel modules options NKMEMCLUSTERS=256 # Size of kernel malloc area options UCONSOLE # anyone can redirect a virtual console #options INSECURE # allow, among other insecure stuff, LKM # loading in multi-user mode. options SCSIVERBOSE # Verbose SCSI errors options NTP # NTP phase/frequency locked loop #Misc. debugging options options DDB # Kernel debugger #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB options DIAGNOSTIC # Extra kernel sanity checks #options DEBUG # Enable misc. kernel debugging code #options SYSCALL_DEBUG # debug all syscalls. #options SCSIDEBUG # Add SCSI debugging statements #options PANICBUTTON # Forced crash via keypress (???) #Amiga specific options #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the # first bank of RAM. (default: unlimited) #options NKPTADD=4 # set this for 4 additional KPT pages #options NKPTADDSHIFT=24 # set this for 1 additional KPT page # per 16 MB (1<<24 bytes) of RAM # define and decrease this, or define and # increase NKPTADD if you get "out of PT pages" # panics. #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete #before the 10 secondinterval ends, or that KBDRESET does work at all. #options KBDRESET # sync on Ctrl-Amiga-Amiga #These options improve performance with the built-in serial port #on slower Amigas. Try the larger buffers first then lev6_defer. #options SERIBUF_SIZE=4096 #options SEROBUF_SIZE=32 #options LEV6_DEFER # defers l6 to l4 (below serial l5) options RETINACONSOLE # enable code to allow retina to be console #options KFONT_8X11 # 8x11 font #This is how you would tell the kernel the A2410 oscillator frequencies: #The used frequencies are the defaults, and do not need option setting #options ULOWELL_OSC1=36000000 #options ULOWELL_OSC2=66667000 #This is how you specify the blitting speed, higher values may speed up blits #a littel bit. If you raise this value too much some trash may appear. #the commented version is the default. #options RH_MEMCLK=61000000 #this option enables the 64 bit sprite which does not work #for quite a few people. E.g. The cursor sprite will turn to a block #when moved to the top of the screen in X. #options RH_64BIT_SPRITE #enables fast scroll code appears to now work on 040 systems. #options RETINA_SPEED_HACK #enables the Hardwarecursor which does not work on some systems. #options RH_HARDWARECURSOR grfrh0 at zbus0 # retina III grf2 at grfrh0 ite2 at grf2 # terminal emulators for grfs msc0 at zbus0 # A2232 MSC multiport serial. mfc0 at zbus0 # MultiFaceCard I/O board mfcs0 at mfc0 unit 0 # MFC serial mfcs1 at mfc0 unit 1 # MFC serial #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] #mfc1 at zbus0 # MultiFaceCard 2nd I/O board #mfcs2 at mfc1 unit 0 #mfcs3 at mfc1 unit 1 #mfcp1 at mfc1 unit 0 hyper* at zbus? # zbus HyperCom3/3+/4/4+ #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 com* at hyper? port ? # Hypercom3/4 serial ports lpt* at hyper? port ? # Hypercom3+/4+ parallel port #DraCo Mainboard devices (sans keyboard) drbbc0 at mainbus0 # DraCo battery backed clock drsupio0 at mainbus0 # DraCo superio chip com* at drsupio? port ? # DraCo serial lpt0 at drsupio? port ? # DraCo parallel #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) #Ethernet cards: le* at zbus0 # A2065, Ameristar, Ariadne ne* at zbus0 # AriadneII ed* at zbus0 # Hydra, ASDG LanRover es* at zbus0 # CEI A4066 EthernetPLUS qn* at zbus0 # Quicknet bah* at zbus0 # C=/Ameristar A2060 / 560 #Greater Valley Product Bus gvpbus* at zbus0 drsc0 at mainbus0 # DraCo scsi scsibus* at drsc0 #each hard drive from low target to high #will configure to the next available sd unit number sd* at scsibus? target ? lun ? # scsi disks st* at scsibus? target ? lun ? # scsi tapes cd* at scsibus? target ? lun ? # scsi cds ss* at scsibus? target ? lun ? # scsi scanner ch* at scsibus? target ? lun ? # scsi autochangers uk* at scsibus? target ? lun ? # scsi unknown pseudo-device loop # loopback network interface pseudo-device sl 1 # SLIP network interfaces pseudo-device ppp 1 # PPP network interfaces pseudo-device tun 1 # network tunnel line discipline #pseudo-device gre 2 # generic L3 over IP tunnel #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) pseudo-device bpfilter 16 # Berkeley packet filter pseudo-device ipfilter # IP Filter package pseudo-device view 4 # views (needed for grfcc) pseudo-device pty 16 # pseudo ptys pseudo-device vnd 4 # vnode pseudo-disks pseudo-device ccd 4 # concatenated disk devices #pseudo-device raid 4 # RAIDframe disk driver #rnd is EXPERIMENTAL at this point. #pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM # use "com" randomness as well (BROKEN) config netbsd root on ? type ?