/* $NetBSD: grf_cv3d.c,v 1.14 2003/01/01 00:28:58 thorpej Exp $ */ /* * Copyright (c) 1995 Michael Teske * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Ezra Story, by Kari * Mettinen, and Michael Teske. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "opt_amigacons.h" #include __KERNEL_RCSID(0, "$NetBSD: grf_cv3d.c,v 1.14 2003/01/01 00:28:58 thorpej Exp $"); #include "grfcv3d.h" #if NGRFCV3D > 0 /* * Graphics routines for the CyberVision 64/3D board, using the S3 ViRGE. * * Modified for CV64/3D from Michael Teske's CV driver by Tobias Abt 10/97. * Bugfixes by Bernd Ernesti 10/97. * Many thanks to Richard Hartmann who gave us his board so we could make * driver. * * TODO: * - ZorroII support * - Blitter support * - Memcheck for 2MB boards (if they exists) */ /* Thanks to Frank Mariak for these infos BOARDBASE +0x4000000 Memorybase start +0x4ffffff Memorybase end +0x5000000 Img TransPort start +0x5007fff Img TransPort end +0x5008000 MMIO Regbase start +0x500ffff MMIO Regbase end +0x5800000 Img TransPort (rot) start +0x5807fff Img TransPort (rot) end +0x7000000 Img TransPort (rot) start +0x7007fff Img TransPort (rot) end +0x8000000 VCodeSwitch start +0x8000fff VCodeSwitch end +0xc000000 IO Regbase start +0xc00ffff IO Regbase end +0xc0e0000 PCI Cfg Base start +0xc0e0fff PCI Cfg Base end Note: IO Regbase is needed fo wakeup of the board otherwise use MMIO Regbase */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include int grfcv3dmatch(struct device *, struct cfdata *, void *); void grfcv3dattach(struct device *, struct device *, void *); int grfcv3dprint(void *, const char *); static int cv3d_has_4mb(volatile caddr_t); static unsigned short cv3d_compute_clock(unsigned long); void cv3d_boardinit(struct grf_softc *); int cv3d_getvmode(struct grf_softc *, struct grfvideo_mode *); int cv3d_setvmode(struct grf_softc *, unsigned int); int cv3d_blank(struct grf_softc *, int *); int cv3d_mode(register struct grf_softc *, u_long, void *, u_long, int); int cv3d_ioctl(register struct grf_softc *gp, u_long cmd, void *data); int cv3d_setmonitor(struct grf_softc *, struct grfvideo_mode *); int cv3d_getcmap(struct grf_softc *, struct grf_colormap *); int cv3d_putcmap(struct grf_softc *, struct grf_colormap *); int cv3d_toggle(struct grf_softc *); int cv3d_mondefok(struct grfvideo_mode *); int cv3d_load_mon(struct grf_softc *, struct grfcv3dtext_mode *); void cv3d_inittextmode(struct grf_softc *); static __inline void cv3dscreen(int, volatile caddr_t); static __inline void cv3d_gfx_on_off(int, volatile caddr_t); #ifdef CV3D_HARDWARE_CURSOR int cv3d_getspritepos(struct grf_softc *, struct grf_position *); int cv3d_setspritepos(struct grf_softc *, struct grf_position *); int cv3d_getspriteinfo(struct grf_softc *,struct grf_spriteinfo *); void cv3d_setup_hwc(struct grf_softc *); int cv3d_setspriteinfo(struct grf_softc *,struct grf_spriteinfo *); int cv3d_getspritemax(struct grf_softc *,struct grf_position *); #endif /* CV3D_HARDWARE_CURSOR */ /* Graphics display definitions. * These are filled by 'grfconfig' using GRFIOCSETMON. */ #define monitor_def_max 24 static struct grfvideo_mode monitor_def[24] = { {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0} }; static struct grfvideo_mode *monitor_current = &monitor_def[0]; #define MAXPIXELCLOCK 135000000 /* safety */ int cv3d_zorroIII = 0; /* CV64/3D in ZorroII or ZorroIII mode */ unsigned char cv3d_pass_toggle; /* passthru status tracker */ /* Console display definition. * Default hardcoded text mode. This grf_cv3d is set up to * use one text mode only, and this is it. You may use * grfconfig to change the mode after boot. */ /* Console font */ #ifdef KFONT_8X11 #define S3FONT kernel_font_8x11 #define S3FONTY 11 #else #define S3FONT kernel_font_8x8 #define S3FONTY 8 #endif extern unsigned char S3FONT[]; /* * Define default console mode * (Internally, we still have to use hvalues/8!) */ struct grfcv3dtext_mode cv3dconsole_mode = { {255, "", 25000000, 640, 480, 4, 640/8, 680/8, 768/8, 800/8, 481, 491, 493, 525, 0}, 8, S3FONTY, 80, 480 / S3FONTY, S3FONT, 32, 255 }; /* Console colors */ unsigned char cv3dconscolors[16][3] = { /* background, foreground, hilite */ /* R G B */ {0x30, 0x30, 0x30}, {0x00, 0x00, 0x00}, {0x80, 0x00, 0x00}, {0x00, 0x80, 0x00}, {0x00, 0x00, 0x80}, {0x80, 0x80, 0x00}, {0x00, 0x80, 0x80}, {0x80, 0x00, 0x80}, {0xff, 0xff, 0xff}, {0x40, 0x40, 0x40}, {0xff, 0x00, 0x00}, {0x00, 0xff, 0x00}, {0x00, 0x00, 0xff}, {0xff, 0xff, 0x00}, {0x00, 0xff, 0xff}, {0x00, 0x00, 0xff} }; static unsigned char clocks[]={ 0x13, 0x61, 0x6b, 0x6d, 0x51, 0x69, 0x54, 0x69, 0x4f, 0x68, 0x6b, 0x6b, 0x18, 0x61, 0x7b, 0x6c, 0x51, 0x67, 0x24, 0x62, 0x56, 0x67, 0x77, 0x6a, 0x1d, 0x61, 0x53, 0x66, 0x6b, 0x68, 0x79, 0x69, 0x7c, 0x69, 0x7f, 0x69, 0x22, 0x61, 0x54, 0x65, 0x56, 0x65, 0x58, 0x65, 0x67, 0x66, 0x41, 0x63, 0x27, 0x61, 0x13, 0x41, 0x37, 0x62, 0x6b, 0x4d, 0x23, 0x43, 0x51, 0x49, 0x79, 0x66, 0x54, 0x49, 0x7d, 0x66, 0x34, 0x56, 0x4f, 0x63, 0x1f, 0x42, 0x6b, 0x4b, 0x7e, 0x4d, 0x18, 0x41, 0x2a, 0x43, 0x7b, 0x4c, 0x74, 0x4b, 0x51, 0x47, 0x65, 0x49, 0x24, 0x42, 0x68, 0x49, 0x56, 0x47, 0x75, 0x4a, 0x77, 0x4a, 0x31, 0x43, 0x1d, 0x41, 0x71, 0x49, 0x53, 0x46, 0x29, 0x42, 0x6b, 0x48, 0x1f, 0x41, 0x79, 0x49, 0x6f, 0x48, 0x7c, 0x49, 0x38, 0x43, 0x7f, 0x49, 0x5d, 0x46, 0x22, 0x41, 0x53, 0x45, 0x54, 0x45, 0x55, 0x45, 0x56, 0x45, 0x57, 0x45, 0x58, 0x45, 0x25, 0x41, 0x67, 0x46, 0x5b, 0x45, 0x41, 0x43, 0x78, 0x47, 0x27, 0x41, 0x51, 0x44, 0x13, 0x21, 0x7d, 0x47, 0x37, 0x42, 0x71, 0x46, 0x6b, 0x2d, 0x14, 0x21, 0x23, 0x23, 0x7d, 0x2f, 0x51, 0x29, 0x61, 0x2b, 0x79, 0x46, 0x1d, 0x22, 0x54, 0x29, 0x45, 0x27, 0x7d, 0x46, 0x7f, 0x46, 0x4f, 0x43, 0x2f, 0x41, 0x1f, 0x22, 0x6a, 0x2b, 0x6b, 0x2b, 0x5b, 0x29, 0x7e, 0x2d, 0x65, 0x44, 0x18, 0x21, 0x5e, 0x29, 0x2a, 0x23, 0x45, 0x26, 0x7b, 0x2c, 0x19, 0x21, 0x74, 0x2b, 0x75, 0x2b, 0x51, 0x27, 0x3f, 0x25, 0x65, 0x29, 0x40, 0x25, 0x24, 0x22, 0x41, 0x25, 0x68, 0x29, 0x42, 0x25, 0x56, 0x27, 0x7e, 0x2b, 0x75, 0x2a, 0x1c, 0x21, 0x77, 0x2a, 0x4f, 0x26, 0x31, 0x23, 0x6f, 0x29, 0x1d, 0x21, 0x32, 0x23, 0x71, 0x29, 0x72, 0x29, 0x53, 0x26, 0x69, 0x28, 0x29, 0x22, 0x75, 0x29, 0x6b, 0x28, 0x1f, 0x21, 0x1f, 0x21, 0x6d, 0x28, 0x79, 0x29, 0x2b, 0x22, 0x6f, 0x28, 0x59, 0x26, 0x7c, 0x29, 0x7d, 0x29, 0x38, 0x23, 0x21, 0x21, 0x7f, 0x29, 0x39, 0x23, 0x5d, 0x26, 0x75, 0x28, 0x22, 0x21, 0x77, 0x28, 0x53, 0x25, 0x6c, 0x27, 0x54, 0x25, 0x61, 0x26, 0x55, 0x25, 0x30, 0x22, 0x56, 0x25, 0x63, 0x26, 0x57, 0x25, 0x71, 0x27, 0x58, 0x25, 0x7f, 0x28, 0x25, 0x21, 0x74, 0x27, 0x67, 0x26, 0x40, 0x23, 0x5b, 0x25, 0x26, 0x21, 0x41, 0x23, 0x34, 0x22, 0x78, 0x27, 0x6b, 0x26, 0x27, 0x21, 0x35, 0x22, 0x51, 0x24, 0x7b, 0x27, 0x13, 0x1, 0x13, 0x1, 0x7d, 0x27, 0x4c, 0x9, 0x37, 0x22, 0x5b, 0xb, 0x71, 0x26, 0x5c, 0xb, 0x6b, 0xd, 0x47, 0x23, 0x14, 0x1, 0x4f, 0x9, 0x23, 0x3, 0x75, 0x26, 0x7d, 0xf, 0x1c, 0x2, 0x51, 0x9, 0x59, 0x24, 0x61, 0xb, 0x69, 0x25, 0x79, 0x26, 0x34, 0x5, 0x1d, 0x2, 0x6b, 0x25, 0x54, 0x9, 0x35, 0x5, 0x45, 0x7, 0x6d, 0x25, 0x7d, 0x26, 0x16, 0x1, 0x7f, 0x26, 0x77, 0xd, 0x4f, 0x23, 0x78, 0xd, 0x2f, 0x21, 0x27, 0x3, 0x1f, 0x2, 0x59, 0x9, 0x6a, 0xb, 0x73, 0x25, 0x6b, 0xb, 0x63, 0x24, 0x5b, 0x9, 0x20, 0x2, 0x7e, 0xd, 0x4b, 0x7, 0x65, 0x24, 0x43, 0x22, 0x18, 0x1, 0x6f, 0xb, 0x5e, 0x9, 0x70, 0xb, 0x2a, 0x3, 0x33, 0x4, 0x45, 0x6, 0x60, 0x9, 0x7b, 0xc, 0x19, 0x1, 0x19, 0x1, 0x7d, 0xc, 0x74, 0xb, 0x50, 0x7, 0x75, 0xb, 0x63, 0x9, 0x51, 0x7, 0x23, 0x2, 0x3f, 0x5, 0x1a, 0x1, 0x65, 0x9, 0x2d, 0x3, 0x40, 0x5, 0x0, 0x0, }; /* Board Address of CV64/3D */ static volatile caddr_t cv3d_boardaddr; static int cv3d_fbsize; static volatile caddr_t cv3d_memory_io_base; static volatile caddr_t cv3d_register_base; static volatile caddr_t cv3d_vcode_switch_base; static volatile caddr_t cv3d_special_register_base; /* * Memory clock (binpatchable). */ long cv3d_memclk = 55000000; /* standard driver stuff */ CFATTACH_DECL(grfcv3d, sizeof(struct grf_softc), grfcv3dmatch, grfcv3dattach, NULL, NULL); static struct cfdata *cfdata; #define CV3D_ULCURSOR 1 /* Underlined Cursor in textmode */ /* * Get frambuffer memory size. * phase5 didn't provide the bit in CR36, * so we have to do it this way. * Return 0 for 2MB, 1 for 4MB */ static int cv3d_has_4mb(volatile caddr_t fb) { #if 0 /* XXX */ volatile unsigned long *testfbw, *testfbr; /* write patterns in memory and test if they can be read */ testfbw = (volatile unsigned long *)fb; testfbr = (volatile unsigned long *)(fb + 0x02000000); *testfbw = 0x87654321; if (*testfbr != 0x87654321) return (0); /* upper memory region */ testfbw = (volatile unsigned long *)(fb + 0x00200000); testfbr = (volatile unsigned long *)(fb + 0x02200000); *testfbw = 0x87654321; if (*testfbr != 0x87654321) return (0); *testfbw = 0xAAAAAAAA; if (*testfbr != 0xAAAAAAAA) return (0); *testfbw = 0x55555555; if (*testfbr != 0x55555555) return (0); #endif return (1); } int grfcv3dmatch(struct device *pdp, struct cfdata *cfp, void *auxp) { #ifdef CV3DCONSOLE static int cv3dcons_unit = -1; #endif struct zbus_args *zap; zap = auxp; if (amiga_realconfig == 0) #ifdef CV3DCONSOLE if (cv3dcons_unit != -1) #endif return (0); /* * Distinct between ZorroII or ZorroIII mode. * Note that iszthreepa(x) is true for the Z2 bus on the DraCo; * therefore we check for the size instead. */ cv3d_zorroIII = zap->size > 4*1024*1024; /* Lets be Paranoid: Test man and prod id */ if (zap->manid != 8512 || zap->prodid != 67) return (0); #ifndef CV3DONZORRO2 if (!cv3d_zorroIII) { return (0); } #endif cv3d_boardaddr = zap->va; #ifdef CV3DCONSOLE if (amiga_realconfig == 0) { cv3dcons_unit = cfp->cf_unit; cfdata = cfp; } #endif return (1); } void grfcv3dattach(struct device *pdp, struct device *dp, void *auxp) { static struct grf_softc congrf; struct zbus_args *zap; struct grf_softc *gp; static char attachflag = 0; zap = auxp; printf("\n"); /* * This function is called twice, once on console init (dp == NULL) * and once on "normal" grf7 init. */ if (dp == NULL) /* console init */ gp = &congrf; else gp = (struct grf_softc *)dp; if (dp != NULL && congrf.g_regkva != 0) { /* * inited earlier, just copy (not device struct) */ bcopy(&congrf.g_display, &gp->g_display, (char *) &gp[1] - (char *) &gp->g_display); } else { if (cv3d_zorroIII) { gp->g_fbkva = (volatile caddr_t)cv3d_boardaddr + 0x04800000; cv3d_memory_io_base = (volatile caddr_t)cv3d_boardaddr + 0x05000000; cv3d_register_base = (volatile caddr_t)cv3d_boardaddr + 0x05008000; cv3d_vcode_switch_base = (volatile caddr_t)cv3d_boardaddr + 0x08000000; cv3d_special_register_base = (volatile caddr_t)cv3d_boardaddr + 0x0C000000; } else { gp->g_fbkva = (volatile caddr_t)cv3d_boardaddr + 0x00000000; cv3d_memory_io_base = (volatile caddr_t)cv3d_boardaddr + 0x003E0000; cv3d_register_base = (volatile caddr_t)cv3d_boardaddr + 0x003C8000; cv3d_vcode_switch_base = (volatile caddr_t)cv3d_boardaddr + 0x003A0000; cv3d_special_register_base = (volatile caddr_t)cv3d_boardaddr + 0x003C0000; } gp->g_regkva = (volatile caddr_t)cv3d_register_base; gp->g_unit = GRF_CV3D_UNIT; gp->g_mode = cv3d_mode; gp->g_conpri = grfcv3d_cnprobe(); gp->g_flags = GF_ALIVE; /* wakeup the board */ cv3d_boardinit(gp); #ifdef CV3DCONSOLE grfcv3d_iteinit(gp); (void)cv3d_load_mon(gp, &cv3dconsole_mode); #endif } /* * attach grf */ if (amiga_config_found(cfdata, &gp->g_device, gp, grfcv3dprint)) { if (dp != NULL) printf("%s: CyberVision64/3D with %dMB being used\n", dp->dv_xname, cv3d_fbsize / 0x100000); attachflag = 1; } else { if (!attachflag) /*printf("grfcv3d unattached!!\n")*/; } } int grfcv3dprint(void *auxp, const char *pnp) { if (pnp) aprint_normal("ite at %s: ", pnp); return (UNCONF); } /* * Computes M, N, and R values from * given input frequency. It uses a table of * precomputed values, to keep CPU time low. * * The return value consist of: * lower byte: Bits 4-0: N Divider Value * Bits 5-6: R Value for e.g. SR10 or SR12 * higher byte: Bits 0-6: M divider value for e.g. SR11 or SR13 */ static unsigned short cv3d_compute_clock(unsigned long freq) { static unsigned char *mnr, *save; /* M, N + R vals */ unsigned long work_freq, r; unsigned short erg; long diff, d2; if (freq < 12500000 || freq > MAXPIXELCLOCK) { printf("grfcv3d: Illegal clock frequency: %ldMHz\n", freq/1000000); printf("grfcv3d: Using default frequency: 25MHz\n"); printf("grfcv3d: See the manpage of grfconfig for more informations.\n"); freq = 25000000; } mnr = clocks; /* there the vals are stored */ d2 = 0x7fffffff; while (*mnr) { /* mnr vals are 0-terminated */ work_freq = (0x37EE * (mnr[0] + 2)) / ((mnr[1] & 0x1F) + 2); r = (mnr[1] >> 5) & 0x03; if (r != 0) work_freq=work_freq >> r; /* r is the freq divider */ work_freq *= 0x3E8; /* 2nd part of OSC */ diff = abs(freq - work_freq); if (d2 >= diff) { d2 = diff; /* In save are the vals for minimal diff */ save = mnr; } mnr += 2; } erg = *((unsigned short *)save); return (erg); } void cv3d_boardinit(struct grf_softc *gp) { volatile caddr_t ba, special; unsigned char test; unsigned int clockpar; int i; struct grfinfo *gi; ba = gp->g_regkva; /* PCI config */ if (cv3d_zorroIII) { special = (cv3d_special_register_base + 0x000E0000); } else { special = (cv3d_special_register_base); } *((short *)(special + 0x10)) = 0; *((long *)(special + 0x4)) = 0x02000003; /* Wakeup Chip */ vgawio(cv3d_boardaddr, SREG_VIDEO_SUBS_ENABLE, 1); vgaw(ba, SREG_VIDEO_SUBS_ENABLE, 0x01); vgaw(ba, GREG_MISC_OUTPUT_W, 0x03); WCrt(ba, CRT_ID_REGISTER_LOCK_1, 0x48); /* unlock S3 VGA regs */ WCrt(ba, CRT_ID_REGISTER_LOCK_2, 0xA5); /* unlock syscontrol */ WCrt(ba, CRT_ID_EXT_MISC_CNTL_1, 0x02); WCrt(ba, CRT_ID_EXT_MISC_CNTL_1, 0x00); WSeq(ba, SEQ_ID_UNLOCK_EXT, 0x06); /* Unlock extensions */ /* * bit 0=1: enable enhanced mode functions * bit 4=1: enable linear adressing */ vgaw32(cv3d_memory_io_base, MR_ADVANCED_FUNCTION_CONTROL, 0x00000011); /* -hsync and -vsync */ vgaw(ba, GREG_MISC_OUTPUT_W, 0xC3); /* Reset. This does nothing, but everyone does it:) */ WSeq(ba, SEQ_ID_RESET, 0x03); WSeq(ba, SEQ_ID_CLOCKING_MODE, 0x01); /* 8 Dot Clock */ WSeq(ba, SEQ_ID_MAP_MASK, 0x0F); /* Enable write planes */ WSeq(ba, SEQ_ID_CHAR_MAP_SELECT, 0x00); /* Character Font */ WSeq(ba, SEQ_ID_MEMORY_MODE, 0x02); /* Complete mem access */ WSeq(ba, SEQ_ID_MMIO_SELECT, 0x00); test = RSeq(ba, SEQ_ID_BUS_REQ_CNTL); /* Bus Request */ /* enable 4MB fast Page Mode */ test = test | 0xC0; WSeq(ba, SEQ_ID_BUS_REQ_CNTL, test); #if 0 /* XXX */ /* faster LUT write */ WSeq(ba, SEQ_ID_RAMDAC_CNTL, 0xC0); #else WSeq(ba, SEQ_ID_UNKNOWN6, 0x00); WSeq(ba, SEQ_ID_SIGNAL_SELECT, 0x02); #endif test = RSeq(ba, SEQ_ID_CLKSYN_CNTL_2); /* Clksyn2 read */ /* immediately Clkload bit clear */ test = test & 0xDF; /* 2 MCLK Memory Write.... */ if (cv3d_memclk >= 55000000) test |= 0x80; WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, test); /* Memory CLK */ clockpar = cv3d_compute_clock(cv3d_memclk); test = (clockpar & 0xFF00) >> 8; WSeq(ba, SEQ_ID_MCLK_HI, test); /* PLL N-Divider Value */ test = clockpar & 0xFF; WSeq(ba, SEQ_ID_MCLK_LO, test); /* PLL M-Divider Value */ /* We now load an 25 MHz, 31 kHz, 640x480 standard VGA Mode. */ /* DCLK */ WSeq(ba, SEQ_ID_DCLK_HI, 0x13); WSeq(ba, SEQ_ID_DCLK_LO, 0x41); test = RSeq (ba, SEQ_ID_CLKSYN_CNTL_2); test = test | 0x22; /* DCLK + MCLK Clock immediate load! */ WSeq(ba,SEQ_ID_CLKSYN_CNTL_2, test); /* DCLK load */ test = vgar(ba, 0x3cc); test = test | 0x0c; vgaw(ba, 0x3c2, test); /* Clear bit 5 again, prevent further loading. */ WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, 0x02); WCrt(ba, CRT_ID_HOR_TOTAL, 0x5F); WCrt(ba, CRT_ID_HOR_DISP_ENA_END, 0x4F); WCrt(ba, CRT_ID_START_HOR_BLANK, 0x50); WCrt(ba, CRT_ID_END_HOR_BLANK, 0x82); WCrt(ba, CRT_ID_START_HOR_RETR, 0x54); WCrt(ba, CRT_ID_END_HOR_RETR, 0x80); WCrt(ba, CRT_ID_VER_TOTAL, 0xBF); WCrt(ba, CRT_ID_OVERFLOW, 0x1F); /* overflow reg */ WCrt(ba, CRT_ID_PRESET_ROW_SCAN, 0x00); /* no panning */ WCrt(ba, CRT_ID_MAX_SCAN_LINE, 0x40); /* vscan */ WCrt(ba, CRT_ID_CURSOR_START, 0x00); WCrt(ba, CRT_ID_CURSOR_END, 0x00); /* Display start adress */ WCrt(ba, CRT_ID_START_ADDR_HIGH, 0x00); WCrt(ba, CRT_ID_START_ADDR_LOW, 0x00); /* Cursor location */ WCrt(ba, CRT_ID_CURSOR_LOC_HIGH, 0x00); WCrt(ba, CRT_ID_CURSOR_LOC_LOW, 0x00); /* Vertical retrace */ WCrt(ba, CRT_ID_START_VER_RETR, 0x9C); WCrt(ba, CRT_ID_END_VER_RETR, 0x0E); WCrt(ba, CRT_ID_VER_DISP_ENA_END, 0x8F); WCrt(ba, CRT_ID_SCREEN_OFFSET, 0x50); WCrt(ba, CRT_ID_UNDERLINE_LOC, 0x00); WCrt(ba, CRT_ID_START_VER_BLANK, 0x96); WCrt(ba, CRT_ID_END_VER_BLANK, 0xB9); WCrt(ba, CRT_ID_MODE_CONTROL, 0xE3); WCrt(ba, CRT_ID_LINE_COMPARE, 0xFF); WCrt(ba, CRT_ID_SYSTEM_CONFIG, 0x21); WCrt(ba, CRT_ID_MEMORY_CONF, 0x04); WCrt(ba, CRT_ID_BACKWAD_COMP_1, 0x00); WCrt(ba, CRT_ID_BACKWAD_COMP_2, 0x02); WCrt(ba, CRT_ID_BACKWAD_COMP_3, 0x10); /* FIFO enabled */ /* Refresh count 1, High speed text font, enhanced color mode */ WCrt(ba, CRT_ID_MISC_1, 0x35); /* start fifo position */ WCrt(ba, CRT_ID_DISPLAY_FIFO, 0x5A); WCrt(ba, CRT_ID_EXT_MEM_CNTL_2, 0x02); WCrt(ba, CRT_ID_LAW_POS_LO, 0x40); WCrt(ba, CRT_ID_EXT_MISC_CNTL_1, 0x81); WCrt(ba, CRT_ID_MISC_1, 0xB5); WCrt(ba, CRT_ID_CONFIG_1, 0x0E); WGfx(ba, GCT_ID_SET_RESET, 0x00); WGfx(ba, GCT_ID_ENABLE_SET_RESET, 0x00); WGfx(ba, GCT_ID_COLOR_COMPARE, 0x00); WGfx(ba, GCT_ID_DATA_ROTATE, 0x00); WGfx(ba, GCT_ID_READ_MAP_SELECT, 0x00); WGfx(ba, GCT_ID_GRAPHICS_MODE, 0x40); WGfx(ba, GCT_ID_MISC, 0x01); WGfx(ba, GCT_ID_COLOR_XCARE, 0x0F); WGfx(ba, GCT_ID_BITMASK, 0xFF); /* colors for text mode */ for (i = 0; i <= 0xf; i++) WAttr (ba, i, i); WAttr(ba, ACT_ID_ATTR_MODE_CNTL, 0x41); WAttr(ba, ACT_ID_OVERSCAN_COLOR, 0x01); WAttr(ba, ACT_ID_COLOR_PLANE_ENA, 0x0F); WAttr(ba, ACT_ID_HOR_PEL_PANNING, 0x00); WAttr(ba, ACT_ID_COLOR_SELECT, 0x00); vgawio(cv3d_boardaddr, VDAC_MASK, 0xFF); /* DAC Mask */ /* colors initially set to greyscale */ vgawio(cv3d_boardaddr, VDAC_ADDRESS_W, 0); for (i = 255; i >= 0 ; i--) { vgawio(cv3d_boardaddr, VDAC_DATA, i); vgawio(cv3d_boardaddr, VDAC_DATA, i); vgawio(cv3d_boardaddr, VDAC_DATA, i); } /* GFx hardware cursor off */ WCrt(ba, CRT_ID_HWGC_MODE, 0x00); /* Set first to 4 MB, so test will work */ WCrt(ba, CRT_ID_LAW_CNTL, 0x13); /* find *correct* fbsize of z3 board */ if (cv3d_has_4mb(gp->g_fbkva)) { cv3d_fbsize = 1024 * 1024 * 4; WCrt(ba, CRT_ID_LAW_CNTL, 0x13); /* 4 MB */ } else { cv3d_fbsize = 1024 * 1024 * 2; WCrt(ba, CRT_ID_LAW_CNTL, 0x12); /* 2 MB */ } /* Initialize graphics engine */ GfxBusyWait(cv3d_memory_io_base); vgaw32(cv3d_memory_io_base, BLT_COMMAND_SET, CMD_NOP); vgaw32(cv3d_memory_io_base, BLT_CLIP_LEFT_RIGHT, 0x000007ff); vgaw32(cv3d_memory_io_base, BLT_CLIP_TOP_BOTTOM, 0x000007ff); vgaw32(cv3d_memory_io_base, L2D_COMMAND_SET, CMD_NOP); vgaw32(cv3d_memory_io_base, L2D_CLIP_LEFT_RIGHT, 0x000007ff); vgaw32(cv3d_memory_io_base, L2D_CLIP_TOP_BOTTOM, 0x000007ff); vgaw32(cv3d_memory_io_base, P2D_COMMAND_SET, CMD_NOP); vgaw32(cv3d_memory_io_base, P2D_CLIP_LEFT_RIGHT, 0x000007ff); vgaw32(cv3d_memory_io_base, P2D_CLIP_TOP_BOTTOM, 0x000007ff); /* Enable Video Display (Set Bit 5) */ WAttr(ba, 0x33, 0); gi = &gp->g_display; gi->gd_regaddr = (caddr_t) kvtop (ba); gi->gd_regsize = 64 * 1024; gi->gd_fbaddr = (caddr_t) kvtop (gp->g_fbkva); gi->gd_fbsize = cv3d_fbsize; } int cv3d_getvmode(struct grf_softc *gp, struct grfvideo_mode *vm) { struct grfvideo_mode *gv; #ifdef CV3DCONSOLE /* Handle grabbing console mode */ if (vm->mode_num == 255) { bcopy(&cv3dconsole_mode, vm, sizeof(struct grfvideo_mode)); /* XXX so grfconfig can tell us the correct text dimensions. */ vm->depth = cv3dconsole_mode.fy; } else #endif { if (vm->mode_num == 0) vm->mode_num = (monitor_current - monitor_def) + 1; if (vm->mode_num < 1 || vm->mode_num > monitor_def_max) return (EINVAL); gv = monitor_def + (vm->mode_num - 1); if (gv->mode_num == 0) return (EINVAL); bcopy(gv, vm, sizeof(struct grfvideo_mode)); } /* adjust internal values to pixel values */ vm->hblank_start *= 8; vm->hsync_start *= 8; vm->hsync_stop *= 8; vm->htotal *= 8; return (0); } int cv3d_setvmode(struct grf_softc *gp, unsigned mode) { if (!mode || (mode > monitor_def_max) || monitor_def[mode - 1].mode_num == 0) return (EINVAL); monitor_current = monitor_def + (mode - 1); return (0); } int cv3d_blank(struct grf_softc *gp, int *on) { volatile caddr_t ba; ba = gp->g_regkva; cv3d_gfx_on_off(*on > 0 ? 0 : 1, ba); return (0); } /* * Change the mode of the display. * Return a UNIX error number or 0 for success. */ int cv3d_mode(register struct grf_softc *gp, u_long cmd, void *arg, u_long a2, int a3) { int error; switch (cmd) { case GM_GRFON: error = cv3d_load_mon (gp, (struct grfcv3dtext_mode *) monitor_current) ? 0 : EINVAL; return (error); case GM_GRFOFF: #ifndef CV3DCONSOLE cv3dscreen(1, cv3d_vcode_switch_base); #else cv3d_load_mon(gp, &cv3dconsole_mode); ite_reinit(gp->g_itedev); #endif return (0); case GM_GRFCONFIG: return (0); case GM_GRFGETVMODE: return (cv3d_getvmode (gp, (struct grfvideo_mode *) arg)); case GM_GRFSETVMODE: error = cv3d_setvmode (gp, *(unsigned *) arg); if (!error && (gp->g_flags & GF_GRFON)) cv3d_load_mon(gp, (struct grfcv3dtext_mode *) monitor_current); return (error); case GM_GRFGETNUMVM: *(int *)arg = monitor_def_max; return (0); case GM_GRFIOCTL: return (cv3d_ioctl (gp, a2, arg)); default: break; } return (EPASSTHROUGH); } int cv3d_ioctl(register struct grf_softc *gp, u_long cmd, void *data) { switch (cmd) { #ifdef CV3D_HARDWARE_CURSOR case GRFIOCGSPRITEPOS: return(cv3d_getspritepos (gp, (struct grf_position *) data)); case GRFIOCSSPRITEPOS: return(cv3d_setspritepos (gp, (struct grf_position *) data)); case GRFIOCSSPRITEINF: return(cv3d_setspriteinfo (gp, (struct grf_spriteinfo *) data)); case GRFIOCGSPRITEINF: return(cv3d_getspriteinfo (gp, (struct grf_spriteinfo *) data)); case GRFIOCGSPRITEMAX: return(cv3d_getspritemax (gp, (struct grf_position *) data)); #else /* CV3D_HARDWARE_CURSOR */ case GRFIOCGSPRITEPOS: case GRFIOCSSPRITEPOS: case GRFIOCSSPRITEINF: case GRFIOCGSPRITEINF: case GRFIOCGSPRITEMAX: break; #endif /* CV3D_HARDWARE_CURSOR */ case GRFIOCGETCMAP: return (cv3d_getcmap (gp, (struct grf_colormap *) data)); case GRFIOCPUTCMAP: return (cv3d_putcmap (gp, (struct grf_colormap *) data)); case GRFIOCBITBLT: break; case GRFTOGGLE: return (cv3d_toggle (gp)); case GRFIOCSETMON: return (cv3d_setmonitor (gp, (struct grfvideo_mode *)data)); case GRFIOCBLANK: return (cv3d_blank (gp, (int *)data)); } return (EPASSTHROUGH); } int cv3d_setmonitor(struct grf_softc *gp, struct grfvideo_mode *gv) { struct grfvideo_mode *md; if (!cv3d_mondefok(gv)) return (EINVAL); #ifdef CV3DCONSOLE /* handle interactive setting of console mode */ if (gv->mode_num == 255) { bcopy(gv, &cv3dconsole_mode.gv, sizeof(struct grfvideo_mode)); cv3dconsole_mode.gv.hblank_start /= 8; cv3dconsole_mode.gv.hsync_start /= 8; cv3dconsole_mode.gv.hsync_stop /= 8; cv3dconsole_mode.gv.htotal /= 8; cv3dconsole_mode.rows = gv->disp_height / cv3dconsole_mode.fy; cv3dconsole_mode.cols = gv->disp_width / cv3dconsole_mode.fx; if (!(gp->g_flags & GF_GRFON)) cv3d_load_mon(gp, &cv3dconsole_mode); ite_reinit(gp->g_itedev); return (0); } #endif md = monitor_def + (gv->mode_num - 1); /* * Prevent user from crashing the system by using * grfconfig while in X */ if (gp->g_flags & GF_GRFON) if (md == monitor_current) { printf("grfcv3d: Changing the used mode not allowed!\n"); return (EINVAL); } bcopy(gv, md, sizeof(struct grfvideo_mode)); /* adjust pixel oriented values to internal rep. */ md->hblank_start /= 8; md->hsync_start /= 8; md->hsync_stop /= 8; md->htotal /= 8; return (0); } int cv3d_getcmap(struct grf_softc *gfp, struct grf_colormap *cmap) { volatile caddr_t ba; u_char red[256], green[256], blue[256], *rp, *gp, *bp; short x; int error; ba = gfp->g_regkva; if (cmap->count == 0 || cmap->index >= 256) return (0); if (cmap->count > 256 - cmap->index) cmap->count = 256 - cmap->index; /* first read colors out of the chip, then copyout to userspace */ vgawio(cv3d_boardaddr, VDAC_ADDRESS_W, cmap->index); x = cmap->count - 1; rp = red + cmap->index; gp = green + cmap->index; bp = blue + cmap->index; do { *rp++ = vgario(cv3d_special_register_base, VDAC_DATA) << 2; *gp++ = vgario(cv3d_special_register_base, VDAC_DATA) << 2; *bp++ = vgario(cv3d_special_register_base, VDAC_DATA) << 2; } while (x-- > 0); if (!(error = copyout (red + cmap->index, cmap->red, cmap->count)) && !(error = copyout (green + cmap->index, cmap->green, cmap->count)) && !(error = copyout (blue + cmap->index, cmap->blue, cmap->count))) return (0); return (error); } int cv3d_putcmap(struct grf_softc *gfp, struct grf_colormap *cmap) { volatile caddr_t ba; u_char red[256], green[256], blue[256], *rp, *gp, *bp; short x; int error; ba = gfp->g_regkva; if (cmap->count == 0 || cmap->index >= 256) return (0); if (cmap->index + cmap->count > 256) cmap->count = 256 - cmap->index; /* first copy the colors into kernelspace */ if (!(error = copyin (cmap->red, red + cmap->index, cmap->count)) && !(error = copyin (cmap->green, green + cmap->index, cmap->count)) && !(error = copyin (cmap->blue, blue + cmap->index, cmap->count))) { vgawio(cv3d_boardaddr, VDAC_ADDRESS_W, cmap->index); x = cmap->count - 1; rp = red + cmap->index; gp = green + cmap->index; bp = blue + cmap->index; do { vgawio(cv3d_boardaddr, VDAC_DATA, *rp++ >> 2); vgawio(cv3d_boardaddr, VDAC_DATA, *gp++ >> 2); vgawio(cv3d_boardaddr, VDAC_DATA, *bp++ >> 2); } while (x-- > 0); return (0); } else return (error); } int cv3d_toggle(struct grf_softc *gp) { volatile caddr_t ba; ba = gp->g_regkva; #ifndef CV3DCONSOLE cv3d_pass_toggle = 1; #endif /* !CV3DCONSOLE */ if (cv3d_pass_toggle) { cv3dscreen(0, cv3d_vcode_switch_base); cv3d_pass_toggle = 0; } else { cv3dscreen(1, cv3d_vcode_switch_base); cv3d_pass_toggle = 1; } return (0); } int cv3d_mondefok(struct grfvideo_mode *gv) { unsigned long maxpix; if (gv->mode_num < 1 || gv->mode_num > monitor_def_max) { if (gv->mode_num != 255 || gv->depth != 4) return (0); } switch(gv->depth) { case 4: maxpix = MAXPIXELCLOCK - 55000000; break; case 8: maxpix = MAXPIXELCLOCK; break; case 15: case 16: #ifdef CV3D_AGGRESSIVE_TIMING maxpix = MAXPIXELCLOCK - 35000000; #else maxpix = MAXPIXELCLOCK - 55000000; #endif break; case 24: case 32: #ifdef CV3D_AGGRESSIVE_TIMING maxpix = MAXPIXELCLOCK - 75000000; #else maxpix = MAXPIXELCLOCK - 85000000; #endif break; default: printf("grfcv3d: Illegal depth in mode %d\n", (int) gv->mode_num); return (0); } if (gv->pixel_clock > maxpix) { printf("grfcv3d: Pixelclock too high in mode %d\n", (int) gv->mode_num); return (0); } if (gv->mode_num == 255) { /* console mode */ if ((gv->disp_width / 8) > MAXCOLS) { printf ("grfcv3d: Too many columns for console\n"); return (0); } else if ((gv->disp_height / S3FONTY) > MAXROWS) { printf ("grfcv3d: Too many rows for console\n"); return (0); } } if (gv->disp_flags & GRF_FLAGS_SYNC_ON_GREEN) { printf("grfcv3d: sync-on-green is not supported\n"); return (0); } return (1); } int cv3d_load_mon(struct grf_softc *gp, struct grfcv3dtext_mode *md) { struct grfvideo_mode *gv; struct grfinfo *gi; volatile caddr_t ba, fb; unsigned short mnr; unsigned short HT, HDE, HBS, HBE, HSS, HSE, VDE, VBS, VBE, VSS, VSE, VT; int cr50, cr66, sr15, sr18, clock_mode, test; int hmul; /* Multiplier for hor. Values */ int fb_flag = 2; /* default value for 8bit memory access */ unsigned char hvsync_pulse; char TEXT, CONSOLE; /* identity */ gv = &md->gv; TEXT = (gv->depth == 4); CONSOLE = (gv->mode_num == 255); if (!cv3d_mondefok(gv)) { printf("grfcv3d: Monitor definition not ok\n"); return (0); } ba = gp->g_regkva; fb = gp->g_fbkva; /* turn gfx off, don't mess up the display */ cv3d_gfx_on_off(1, ba); /* provide all needed information in grf device-independant locations */ gp->g_data = (caddr_t) gv; gi = &gp->g_display; gi->gd_colors = 1 << gv->depth; gi->gd_planes = gv->depth; gi->gd_fbwidth = gv->disp_width; gi->gd_fbheight = gv->disp_height; gi->gd_fbx = 0; gi->gd_fby = 0; if (CONSOLE) { gi->gd_dwidth = md->fx * md->cols; gi->gd_dheight = md->fy * md->rows; } else { gi->gd_dwidth = gv->disp_width; gi->gd_dheight = gv->disp_height; } gi->gd_dx = 0; gi->gd_dy = 0; /* get display mode parameters */ switch (gv->depth) { case 15: case 16: hmul = 2; break; default: hmul = 1; break; } HBS = gv->hblank_start * hmul; HSS = gv->hsync_start * hmul; HSE = gv->hsync_stop * hmul; HBE = gv->htotal * hmul - 6; HT = gv->htotal * hmul - 5; VBS = gv->vblank_start - 1; VSS = gv->vsync_start; VSE = gv->vsync_stop; VBE = gv->vtotal - 3; VT = gv->vtotal - 2; /* * Disable enhanced Mode for text display * * XXX You need to set this bit in CRT_ID_EXT_MISC_CNTL_1 * _and_ MR_ADVANCED_FUNCTION_CONTROL, because the same * function exists in both registers. */ cr66 = RCrt(ba, CRT_ID_EXT_MISC_CNTL_1); if (TEXT) { cr66 &= ~0x01; vgaw32(cv3d_memory_io_base, MR_ADVANCED_FUNCTION_CONTROL, 0x00000010); } else { cr66 |= 0x01; vgaw32(cv3d_memory_io_base, MR_ADVANCED_FUNCTION_CONTROL, 0x00000011); } WCrt(ba, CRT_ID_EXT_MISC_CNTL_1, cr66); if (TEXT) HDE = ((gv->disp_width + md->fx - 1) / md->fx) - 1; else HDE = (gv->disp_width + 3) * hmul / 8 - 1; /*HBS;*/ VDE = gv->disp_height - 1; /* adjustments */ if (gv->disp_flags & GRF_FLAGS_LACE) { VDE = VDE / 2; VBS = VBS / 2; VSS = VSS / 2; VSE = VSE / 2; VBE = VBE / 2; VT = VT / 2; } /* Horizontal/Vertical Sync Pulse */ /* * GREG_MISC_OUTPUT_W Register: * bit description (0/1) * 0 Monochrome/Color emulation * 1 Disable/Enable access of the display memory from the CPU * 5 Select the low/high 64K page of memory * 6 Select a positive/negative horizontal retrace sync pulse * 7 Select a positive/negative vertical retrace sync pulse */ hvsync_pulse = vgar(ba, GREG_MISC_OUTPUT_R); if (gv->disp_flags & GRF_FLAGS_PHSYNC) hvsync_pulse &= ~0x40; else hvsync_pulse |= 0x40; if (gv->disp_flags & GRF_FLAGS_PVSYNC) hvsync_pulse &= ~0x80; else hvsync_pulse |= 0x80; vgaw(ba, GREG_MISC_OUTPUT_W, hvsync_pulse); /* GFX hardware cursor off */ WCrt(ba, CRT_ID_HWGC_MODE, 0x00); WCrt(ba, CRT_ID_EXT_DAC_CNTL, 0x00); WSeq(ba, SEQ_ID_MEMORY_MODE, (TEXT || (gv->depth == 1)) ? 0x06 : 0x0e); WGfx(ba, GCT_ID_READ_MAP_SELECT, 0x00); WSeq(ba, SEQ_ID_MAP_MASK, (gv->depth == 1) ? 0x01 : 0xff); WSeq(ba, SEQ_ID_CHAR_MAP_SELECT, 0x00); /* Set clock */ mnr = cv3d_compute_clock(gv->pixel_clock); WSeq(ba, SEQ_ID_DCLK_HI, ((mnr & 0xFF00) >> 8)); WSeq(ba, SEQ_ID_DCLK_LO, (mnr & 0xFF)); /* load display parameters into board */ WCrt(ba, CRT_ID_EXT_HOR_OVF, ((HT & 0x100) ? 0x01 : 0x00) | ((HDE & 0x100) ? 0x02 : 0x00) | ((HBS & 0x100) ? 0x04 : 0x00) | /* ((HBE & 0x40) ? 0x08 : 0x00) | */ /* Later... */ ((HSS & 0x100) ? 0x10 : 0x00) | /* ((HSE & 0x20) ? 0x20 : 0x00) | */ (((HT-5) & 0x100) ? 0x40 : 0x00) ); WCrt(ba, CRT_ID_EXT_VER_OVF, 0x40 | /* Line compare */ ((VT & 0x400) ? 0x01 : 0x00) | ((VDE & 0x400) ? 0x02 : 0x00) | ((VBS & 0x400) ? 0x04 : 0x00) | ((VSS & 0x400) ? 0x10 : 0x00) ); WCrt(ba, CRT_ID_HOR_TOTAL, HT); WCrt(ba, CRT_ID_DISPLAY_FIFO, HT - 5); WCrt(ba, CRT_ID_HOR_DISP_ENA_END, ((HDE >= HBS) ? (HBS - 1) : HDE)); WCrt(ba, CRT_ID_START_HOR_BLANK, HBS); WCrt(ba, CRT_ID_END_HOR_BLANK, ((HBE & 0x1f) | 0x80)); WCrt(ba, CRT_ID_START_HOR_RETR, HSS); WCrt(ba, CRT_ID_END_HOR_RETR, (HSE & 0x1f) | ((HBE & 0x20) ? 0x80 : 0x00) ); WCrt(ba, CRT_ID_VER_TOTAL, VT); WCrt(ba, CRT_ID_OVERFLOW, 0x10 | ((VT & 0x100) ? 0x01 : 0x00) | ((VDE & 0x100) ? 0x02 : 0x00) | ((VSS & 0x100) ? 0x04 : 0x00) | ((VBS & 0x100) ? 0x08 : 0x00) | ((VT & 0x200) ? 0x20 : 0x00) | ((VDE & 0x200) ? 0x40 : 0x00) | ((VSS & 0x200) ? 0x80 : 0x00) ); WCrt(ba, CRT_ID_MAX_SCAN_LINE, 0x40 | /* TEXT ? 0x00 ??? */ ((gv->disp_flags & GRF_FLAGS_DBLSCAN) ? 0x80 : 0x00) | ((VBS & 0x200) ? 0x20 : 0x00) | (TEXT ? ((md->fy - 1) & 0x1f) : 0x00)); WCrt(ba, CRT_ID_MODE_CONTROL, 0xE3); /* text cursor */ if (TEXT) { #if CV3D_ULCURSOR WCrt(ba, CRT_ID_CURSOR_START, (md->fy & 0x1f) - 2); WCrt(ba, CRT_ID_CURSOR_END, (md->fy & 0x1f) - 1); #else WCrt(ba, CRT_ID_CURSOR_START, 0x00); WCrt(ba, CRT_ID_CURSOR_END, md->fy & 0x1f); #endif WCrt(ba, CRT_ID_UNDERLINE_LOC, (md->fy - 1) & 0x1f); WCrt(ba, CRT_ID_CURSOR_LOC_HIGH, 0x00); WCrt(ba, CRT_ID_CURSOR_LOC_LOW, 0x00); } WCrt(ba, CRT_ID_START_ADDR_HIGH, 0x00); WCrt(ba, CRT_ID_START_ADDR_LOW, 0x00); WCrt(ba, CRT_ID_START_VER_RETR, VSS); WCrt(ba, CRT_ID_END_VER_RETR, (VSE & 0x0f)); WCrt(ba, CRT_ID_VER_DISP_ENA_END, VDE); WCrt(ba, CRT_ID_START_VER_BLANK, VBS); WCrt(ba, CRT_ID_END_VER_BLANK, VBE); WCrt(ba, CRT_ID_LINE_COMPARE, 0xff); WCrt(ba, CRT_ID_LACE_RETR_START, HT / 2); WCrt(ba, CRT_ID_LACE_CONTROL, ((gv->disp_flags & GRF_FLAGS_LACE) ? 0x20 : 0x00)); WGfx(ba, GCT_ID_GRAPHICS_MODE, ((TEXT || (gv->depth == 1)) ? 0x00 : 0x40)); WGfx(ba, GCT_ID_MISC, (TEXT ? 0x04 : 0x01)); WSeq (ba, SEQ_ID_MEMORY_MODE, ((TEXT || (gv->depth == 1)) ? 0x06 : 0x02)); vgawio(cv3d_boardaddr, VDAC_MASK, 0xff); /* Blank border */ test = RCrt(ba, CRT_ID_BACKWAD_COMP_2); WCrt(ba, CRT_ID_BACKWAD_COMP_2, (test | 0x20)); sr15 = RSeq(ba, SEQ_ID_CLKSYN_CNTL_2); sr15 &= ~0x10; sr18 = RSeq(ba, SEQ_ID_RAMDAC_CNTL); sr18 &= ~0x80; clock_mode = 0x00; cr50 = 0x00; test = RCrt(ba, CRT_ID_EXT_MISC_CNTL_2); test &= 0xd; switch (gv->depth) { case 1: case 4: /* text */ fb_flag = 2; HDE = gv->disp_width / 16; break; case 8: fb_flag = 2; if (gv->pixel_clock > 80000000) { /* * CR67 bit 1 is undocumented but needed to prevent * a white line on the left side of the screen. */ clock_mode = 0x10 | 0x02; sr15 |= 0x10; sr18 |= 0x80; } HDE = gv->disp_width / 8; cr50 |= 0x00; break; case 15: fb_flag = 1; clock_mode = 0x30; HDE = gv->disp_width / 4; cr50 |= 0x10; break; case 16: fb_flag = 1; clock_mode = 0x50; HDE = gv->disp_width / 4; cr50 |= 0x10; break; case 24: /* this is really 32 Bit on CV64/3D */ case 32: fb_flag = 0; clock_mode = 0xd0; HDE = (gv->disp_width / 2); cr50 |= 0x30; break; } if (cv3d_zorroIII) { gp->g_fbkva = (volatile caddr_t)cv3d_boardaddr + 0x04000000 + (0x00400000 * fb_flag); } else { /* XXX This is totaly untested */ Select_Zorro2_FrameBuffer(fb_flag); } WCrt(ba, CRT_ID_EXT_MISC_CNTL_2, clock_mode | test); WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, sr15); WSeq(ba, SEQ_ID_RAMDAC_CNTL, sr18); WCrt(ba, CRT_ID_SCREEN_OFFSET, HDE); WCrt(ba, CRT_ID_MISC_1, (TEXT ? 0x05 : 0x35)); test = RCrt(ba, CRT_ID_EXT_SYS_CNTL_2); test &= ~0x30; /* HDE Overflow in bits 4-5 */ test |= (HDE >> 4) & 0x30; WCrt(ba, CRT_ID_EXT_SYS_CNTL_2, test); #if 0 /* XXX */ /* Set up graphics engine */ switch (gv->disp_width) { case 1024: cr50 |= 0x00; break; case 640: cr50 |= 0x40; break; case 800: cr50 |= 0x80; break; case 1280: cr50 |= 0xc0; break; case 1152: cr50 |= 0x01; break; case 1600: cr50 |= 0x81; break; default: /* XXX The Xserver has to handle this */ break; } WCrt(ba, CRT_ID_EXT_SYS_CNTL_1, cr50); #endif delay(100000); WAttr(ba, ACT_ID_ATTR_MODE_CNTL, (TEXT ? 0x08 : 0x41)); delay(100000); WAttr(ba, ACT_ID_COLOR_PLANE_ENA, (gv->depth == 1) ? 0x01 : 0x0f); delay(100000); /* text initialization */ if (TEXT) { cv3d_inittextmode(gp); } if (CONSOLE) { int i; vgawio(cv3d_boardaddr, VDAC_ADDRESS_W, 0); for (i = 0; i < 16; i++) { vgawio(cv3d_boardaddr, VDAC_DATA, cv3dconscolors[i][0]); vgawio(cv3d_boardaddr, VDAC_DATA, cv3dconscolors[i][1]); vgawio(cv3d_boardaddr, VDAC_DATA, cv3dconscolors[i][2]); } } /* Set display enable flag */ WAttr(ba, 0x33, 0); /* turn gfx on again */ cv3d_gfx_on_off(0, ba); /* Pass-through */ cv3dscreen(0, cv3d_vcode_switch_base); return (1); } void cv3d_inittextmode(struct grf_softc *gp) { struct grfcv3dtext_mode *tm = (struct grfcv3dtext_mode *)gp->g_data; volatile caddr_t ba, fb; unsigned char *c, *f, y; unsigned short z; ba = gp->g_regkva; fb = gp->g_fbkva; /* load text font into beginning of display memory. * Each character cell is 32 bytes long (enough for 4 planes) * In linear adressing text mode, the memory is organized * so, that the Bytes of all 4 planes are interleaved. * 1st byte plane 0, 1st byte plane 1, 1st byte plane 2, * 1st byte plane 3, 2nd byte plane 0, 2nd byte plane 1,... * The font is loaded in plane 2. */ c = (unsigned char *) fb; /* clear screen */ for (z = 0; z < tm->cols * tm->rows * 3; z++) { *c++ = 0x20; *c++ = 0x07; *c++ = 0; *c++ = 0; } c = (unsigned char *) (fb) + (32 * tm->fdstart * 4 + 2); f = tm->fdata; for (z = tm->fdstart; z <= tm->fdend; z++, c += (32 - tm->fy) * 4) for (y = 0; y < tm->fy; y++) { *c = *f++; c += 4; } /* print out a little init msg */ c = (unsigned char *)(fb) + (tm->cols - 9) * 4; *c++ = 'C'; *c++ = 0x0c; c +=2; *c++ = 'V'; *c++ = 0x0c; c +=2; *c++ = '6'; *c++ = 0x0b; c +=2; *c++ = '4'; *c++ = 0x0f; c +=2; *c++ = '/'; *c++ = 0x0e; c +=2; *c++ = '3'; *c++ = 0x0a; c +=2; *c++ = 'D'; *c++ = 0x0a; } /* * Monitor Switch * 0 = CyberVision Signal * 1 = Amiga Signal, * ba = boardaddr */ static __inline void cv3dscreen(int toggle, volatile caddr_t ba) { *((short *)(ba)) = (toggle & 1); } /* 0 = on, 1= off */ /* ba= registerbase */ static __inline void cv3d_gfx_on_off(int toggle, volatile caddr_t ba) { int r; toggle &= 0x1; toggle = toggle << 5; r = RSeq(ba, SEQ_ID_CLOCKING_MODE); r &= ~0x20; /* set Bit 5 to 0 */ WSeq(ba, SEQ_ID_CLOCKING_MODE, r | toggle); } #ifdef CV3D_HARDWARE_CURSOR static unsigned char cv3d_hotx = 0, cv3d_hoty = 0; static char cv_cursor_on = 0; #define HWC_OFF (cv3d_fbsize - 1024*2) #define HWC_SIZE 1024 /* Hardware Cursor handling routines */ int cv3d_getspritepos(struct grf_softc *gp, struct grf_position *pos) { int hi,lo; volatile caddr_t ba = gp->g_regkva; hi = RCrt(ba, CRT_ID_HWGC_ORIGIN_Y_HI); lo = RCrt(ba, CRT_ID_HWGC_ORIGIN_Y_LO); pos->y = (hi << 8) + lo; hi = RCrt(ba, CRT_ID_HWGC_ORIGIN_X_HI); lo = RCrt(ba, CRT_ID_HWGC_ORIGIN_X_LO); pos->x = (hi << 8) + lo; return (0); } int cv3d_setspritepos(struct grf_softc *gp, struct grf_position *pos) { volatile caddr_t ba = gp->g_regkva; short x, y; static short savex, savey; short xoff, yoff; if (pos) { x = pos->x; y = pos->y; savex = x; savey= y; } else { /* restore cursor */ x = savex; y = savey; } x -= cv3d_hotx; y -= cv3d_hoty; if (x < 0) { xoff = ((-x) & 0xFE); x = 0; } else { xoff = 0; } if (y < 0) { yoff = ((-y) & 0xFE); y = 0; } else { yoff = 0; } WCrt(ba, CRT_ID_HWGC_ORIGIN_X_HI, (x >> 8)); WCrt(ba, CRT_ID_HWGC_ORIGIN_X_LO, (x & 0xff)); WCrt(ba, CRT_ID_HWGC_ORIGIN_Y_LO, (y & 0xff)); WCrt(ba, CRT_ID_HWGC_DSTART_X, xoff); WCrt(ba, CRT_ID_HWGC_DSTART_Y, yoff); WCrt(ba, CRT_ID_HWGC_ORIGIN_Y_HI, (y >> 8)); return(0); } static __inline short M2I(short val) { return ( ((val & 0xff00) >> 8) | ((val & 0xff) << 8)); } int cv3d_getspriteinfo(struct grf_softc *gp, struct grf_spriteinfo *info) { volatile caddr_t ba, fb; ba = gp->g_regkva; fb = gp->g_fbkva; if (info->set & GRFSPRSET_ENABLE) info->enable = RCrt(ba, CRT_ID_HWGC_MODE) & 0x01; if (info->set & GRFSPRSET_POS) cv3d_getspritepos (gp, &info->pos); #if 0 /* XXX */ if (info->set & GRFSPRSET_SHAPE) { u_char image[512], mask[512]; volatile u_long *hwp; u_char *imp, *mp; short row; info->size.x = 64; info->size.y = 64; for (row = 0, hwp = (u_long *)(fb + HWC_OFF), mp = mask, imp = image; row < 64; row++) { u_long bp10, bp20, bp11, bp21; bp10 = *hwp++; bp20 = *hwp++; bp11 = *hwp++; bp21 = *hwp++; M2I (bp10); M2I (bp20); M2I (bp11); M2I (bp21); *imp++ = (~bp10) & bp11; *imp++ = (~bp20) & bp21; *mp++ = (~bp10) | (bp10 & ~bp11); *mp++ = (~bp20) & (bp20 & ~bp21); } copyout (image, info->image, sizeof (image)); copyout (mask, info->mask, sizeof (mask)); } #endif return(0); } void cv3d_setup_hwc(struct grf_softc *gp) { volatile caddr_t ba = gp->g_regkva; volatile caddr_t hwc; int test; if (gp->g_display.gd_planes <= 4) cv3d_cursor_on = 0; /* don't enable hwc in text modes */ if (cv3d_cursor_on == 0) return; /* reset colour stack */ #if 0 test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); #else /* do it in assembler, the above does't seem to work */ asm volatile ("moveb #0x45, %1@(0x3d4); \ moveb %1@(0x3d5),%0" : "=r" (test) : "a" (ba)); #endif WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); hwc = ba + CRT_ADDRESS_W; *hwc = 0; *hwc = 0; #if 0 test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); #else /* do it in assembler, the above does't seem to work */ asm volatile ("moveb #0x45, %1@(0x3d4); \ moveb %1@(0x3d5),%0" : "=r" (test) : "a" (ba)); #endif switch (gp->g_display.gd_planes) { case 8: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0x1); *hwc = 1; break; default: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); *hwc = 0xff; *hwc = 0xff; } test = HWC_OFF / HWC_SIZE; WCrt (ba, CRT_ID_HWGC_START_AD_HI, (test >> 8)); WCrt (ba, CRT_ID_HWGC_START_AD_LO, (test & 0xff)); WCrt (ba, CRT_ID_HWGC_DSTART_X , 0); WCrt (ba, CRT_ID_HWGC_DSTART_Y , 0); WCrt (ba, CRT_ID_EXT_DAC_CNTL, 0x10); /* Cursor X11 Mode */ /* * Put it into Windoze Mode or you'll see sometimes a white stripe * on the right side (in double clocking modes with a screen bigger * > 1023 pixels). */ WCrt (ba, CRT_ID_EXT_DAC_CNTL, 0x00); /* Cursor Windoze Mode */ WCrt (ba, CRT_ID_HWGC_MODE, 0x01); } /* * This was the reason why you shouldn't use the HWC in the Kernel:( * Obsoleted now by use of interrupts :-) */ #define VerticalRetraceWait(ba) \ { \ while (vgar(ba, GREG_INPUT_STATUS1_R) == 0x00) ; \ while ((vgar(ba, GREG_INPUT_STATUS1_R) & 0x08) == 0x08) ; \ while ((vgar(ba, GREG_INPUT_STATUS1_R) & 0x08) == 0x00) ; \ } int cv3d_setspriteinfo(struct grf_softc *gp, struct grf_spriteinfo *info) { volatile caddr_t ba, fb; int depth = gp->g_display.gd_planes; ba = gp->g_regkva; fb = gp->g_fbkva; if (info->set & GRFSPRSET_SHAPE) { /* * For an explanation of these weird actions here, see above * when reading the shape. We set the shape directly into * the video memory, there's no reason to keep 1k on the * kernel stack just as template */ u_char *image, *mask; volatile u_short *hwp; u_char *imp, *mp; unsigned short row; /* Cursor off */ WCrt (ba, CRT_ID_HWGC_MODE, 0x00); /* * The Trio64 crashes if the cursor data is written * while the cursor is displayed. * Sadly, turning the cursor off is not enough. * What we have to do is: * 1. Wait for vertical retrace, to make sure no-one * has moved the cursor in this sync period (because * another write then would have no effect, argh!). * 2. Move the cursor off-screen * 3. Another wait for v. retrace to make sure the cursor * is really off. * 4. Write the data, finally. * (thanks to Harald Koenig for this tip!) */ /* * Remark 06/06/96: Update in interrupt obsoletes this, * but the warning should stay there! */ VerticalRetraceWait(ba); WCrt (ba, CRT_ID_HWGC_ORIGIN_X_HI, 0x7); WCrt (ba, CRT_ID_HWGC_ORIGIN_X_LO, 0xff); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_LO, 0xff); WCrt (ba, CRT_ID_HWGC_DSTART_X, 0x3f); WCrt (ba, CRT_ID_HWGC_DSTART_Y, 0x3f); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_HI, 0x7); if (info->size.y > 64) info->size.y = 64; if (info->size.x > 64) info->size.x = 64; if (info->size.x < 32) info->size.x = 32; image = malloc(HWC_SIZE, M_TEMP, M_WAITOK); mask = image + HWC_SIZE/2; copyin(info->image, image, info->size.y * info->size.x / 8); copyin(info->mask, mask, info->size.y * info->size.x / 8); hwp = (u_short *)(fb +HWC_OFF); /* This is necessary in order not to crash the board */ VerticalRetraceWait(ba); /* * setting it is slightly more difficult, because we can't * force the application to not pass a *smaller* than * supported bitmap */ for (row = 0, mp = mask, imp = image; row < info->size.y; row++) { u_short im1, im2, im3, im4, m1, m2, m3, m4; m1 = ~(*(unsigned short *)mp); im1 = *(unsigned short *)imp & *(unsigned short *)mp; mp += 2; imp += 2; m2 = ~(*(unsigned short *)mp); im2 = *(unsigned short *)imp & *(unsigned short *)mp; mp += 2; imp += 2; if (info->size.x > 32) { m3 = ~(*(unsigned short *)mp); im3 = *(unsigned short *)imp & *(unsigned short *)mp; mp += 2; imp += 2; m4 = ~(*(unsigned short *)mp); im4 = *(unsigned short *)imp & *(unsigned short *)mp; mp += 2; imp += 2; } else { m3 = 0xffff; im3 = 0; m4 = 0xffff; im4 = 0; } switch (depth) { case 8: *hwp++ = m1; *hwp++ = im1; *hwp++ = m2; *hwp++ = im2; *hwp++ = m3; *hwp++ = im3; *hwp++ = m4; *hwp++ = im4; break; case 15: case 16: *hwp++ = M2I(m1); *hwp++ = M2I(im1); *hwp++ = M2I(m2); *hwp++ = M2I(im2); *hwp++ = M2I(m3); *hwp++ = M2I(im3); *hwp++ = M2I(m4); *hwp++ = M2I(im4); break; case 24: case 32: *hwp++ = M2I(im1); *hwp++ = M2I(m1); *hwp++ = M2I(im2); *hwp++ = M2I(m2); *hwp++ = M2I(im3); *hwp++ = M2I(m3); *hwp++ = M2I(im4); *hwp++ = M2I(m4); break; } } if (depth < 24) { for (; row < 64; row++) { *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; } } else { for (; row < 64; row++) { *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; *hwp++ = 0x0000; *hwp++ = 0xffff; } } free(image, M_TEMP); /* cv3d_setup_hwc(gp); */ cv3d_hotx = info->hot.x; cv3d_hoty = info->hot.y; /* One must not write twice per vertical blank :-( */ VerticalRetraceWait(ba); cv3d_setspritepos(gp, &info->pos); } if (info->set & GRFSPRSET_CMAP) { volatile caddr_t hwc; int test; /* reset colour stack */ test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); switch (depth) { case 8: case 15: case 16: WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); hwc = ba + CRT_ADDRESS_W; *hwc = 0; break; case 32: case 24: WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); hwc = ba + CRT_ADDRESS_W; *hwc = 0; *hwc = 0; break; } test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); switch (depth) { case 8: WCrt (ba, CRT_ID_HWGC_BG_STACK, 1); hwc = ba + CRT_ADDRESS_W; *hwc = 1; break; case 15: case 16: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); hwc = ba + CRT_ADDRESS_W; *hwc = 0xff; break; case 32: case 24: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); hwc = ba + CRT_ADDRESS_W; *hwc = 0xff; *hwc = 0xff; break; } } if (info->set & GRFSPRSET_ENABLE) { if (info->enable) { cv3d_cursor_on = 1; cv3d_setup_hwc(gp); /* WCrt(ba, CRT_ID_HWGC_MODE, 0x01); */ } else WCrt(ba, CRT_ID_HWGC_MODE, 0x00); } if (info->set & GRFSPRSET_POS) cv3d_setspritepos(gp, &info->pos); if (info->set & GRFSPRSET_HOT) { cv3d_hotx = info->hot.x; cv3d_hoty = info->hot.y; cv3d_setspritepos (gp, &info->pos); } return(0); } int cv3d_getspritemax(struct grf_softc *gp, struct grf_position *pos) { pos->x = 64; pos->y = 64; return(0); } #endif /* CV3D_HARDWARE_CURSOR */ #endif /* NGRFCV3D */