/* $NetBSD: rtl81x9.c,v 1.43 2002/11/07 07:51:10 thorpej Exp $ */ /* * Copyright (c) 1997, 1998 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * FreeBSD Id: if_rl.c,v 1.17 1999/06/19 20:17:37 wpaul Exp */ /* * RealTek 8129/8139 PCI NIC driver * * Supports several extremely cheap PCI 10/100 adapters based on * the RealTek chipset. Datasheets can be obtained from * www.realtek.com.tw. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is * probably the worst PCI ethernet controller ever made, with the possible * exception of the FEAST chip made by SMC. The 8139 supports bus-master * DMA, but it has a terrible interface that nullifies any performance * gains that bus-master DMA usually offers. * * For transmission, the chip offers a series of four TX descriptor * registers. Each transmit frame must be in a contiguous buffer, aligned * on a longword (32-bit) boundary. This means we almost always have to * do mbuf copies in order to transmit a frame, except in the unlikely * case where a) the packet fits into a single mbuf, and b) the packet * is 32-bit aligned within the mbuf's data area. The presence of only * four descriptor registers means that we can never have more than four * packets queued for transmission at any one time. * * Reception is not much better. The driver has to allocate a single large * buffer area (up to 64K in size) into which the chip will DMA received * frames. Because we don't know where within this region received packets * will begin or end, we have no choice but to copy data from the buffer * area into mbufs in order to pass the packets up to the higher protocol * levels. * * It's impossible given this rotten design to really achieve decent * performance at 100Mbps, unless you happen to have a 400Mhz PII or * some equally overmuscled CPU to drive it. * * On the bright side, the 8139 does have a built-in PHY, although * rather than using an MDIO serial interface like most other NICs, the * PHY registers are directly accessible through the 8139's register * space. The 8139 supports autonegotiation, as well as a 64-bit multicast * filter. * * The 8129 chip is an older version of the 8139 that uses an external PHY * chip. The 8129 has a serial MDIO interface for accessing the MII where * the 8139 lets you directly access the on-board PHY registers. We need * to select which interface to use depending on the chip type. */ #include __KERNEL_RCSID(0, "$NetBSD: rtl81x9.c,v 1.43 2002/11/07 07:51:10 thorpej Exp $"); #include "bpfilter.h" #include "rnd.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #if NRND > 0 #include #endif #include #include #include #include #include #include #if defined(DEBUG) #define STATIC #else #define STATIC static #endif STATIC void rtk_reset __P((struct rtk_softc *)); STATIC void rtk_rxeof __P((struct rtk_softc *)); STATIC void rtk_txeof __P((struct rtk_softc *)); STATIC void rtk_start __P((struct ifnet *)); STATIC int rtk_ioctl __P((struct ifnet *, u_long, caddr_t)); STATIC int rtk_init __P((struct ifnet *)); STATIC void rtk_stop __P((struct ifnet *, int)); STATIC void rtk_watchdog __P((struct ifnet *)); STATIC void rtk_shutdown __P((void *)); STATIC int rtk_ifmedia_upd __P((struct ifnet *)); STATIC void rtk_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); STATIC u_int16_t rtk_read_eeprom __P((struct rtk_softc *, int, int)); STATIC void rtk_eeprom_putbyte __P((struct rtk_softc *, int, int)); STATIC void rtk_mii_sync __P((struct rtk_softc *)); STATIC void rtk_mii_send __P((struct rtk_softc *, u_int32_t, int)); STATIC int rtk_mii_readreg __P((struct rtk_softc *, struct rtk_mii_frame *)); STATIC int rtk_mii_writereg __P((struct rtk_softc *, struct rtk_mii_frame *)); STATIC int rtk_phy_readreg __P((struct device *, int, int)); STATIC void rtk_phy_writereg __P((struct device *, int, int, int)); STATIC void rtk_phy_statchg __P((struct device *)); STATIC void rtk_tick __P((void *)); STATIC int rtk_enable __P((struct rtk_softc *)); STATIC void rtk_disable __P((struct rtk_softc *)); STATIC void rtk_power __P((int, void *)); STATIC void rtk_setmulti __P((struct rtk_softc *)); STATIC int rtk_list_tx_init __P((struct rtk_softc *)); #define EE_SET(x) \ CSR_WRITE_1(sc, RTK_EECMD, \ CSR_READ_1(sc, RTK_EECMD) | (x)) #define EE_CLR(x) \ CSR_WRITE_1(sc, RTK_EECMD, \ CSR_READ_1(sc, RTK_EECMD) & ~(x)) /* * Send a read command and address to the EEPROM, check for ACK. */ STATIC void rtk_eeprom_putbyte(sc, addr, addr_len) struct rtk_softc *sc; int addr, addr_len; { int d, i; d = (RTK_EECMD_READ << addr_len) | addr; /* * Feed in each bit and stobe the clock. */ for (i = RTK_EECMD_LEN + addr_len; i > 0; i--) { if (d & (1 << (i - 1))) { EE_SET(RTK_EE_DATAIN); } else { EE_CLR(RTK_EE_DATAIN); } DELAY(4); EE_SET(RTK_EE_CLK); DELAY(4); EE_CLR(RTK_EE_CLK); DELAY(4); } } /* * Read a word of data stored in the EEPROM at address 'addr.' */ u_int16_t rtk_read_eeprom(sc, addr, addr_len) struct rtk_softc *sc; int addr, addr_len; { u_int16_t word = 0; int i; /* Enter EEPROM access mode. */ CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_PROGRAM|RTK_EE_SEL); /* * Send address of word we want to read. */ rtk_eeprom_putbyte(sc, addr, addr_len); CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_PROGRAM|RTK_EE_SEL); /* * Start reading bits from EEPROM. */ for (i = 16; i > 0; i--) { EE_SET(RTK_EE_CLK); DELAY(4); if (CSR_READ_1(sc, RTK_EECMD) & RTK_EE_DATAOUT) word |= 1 << (i - 1); EE_CLR(RTK_EE_CLK); DELAY(4); } /* Turn off EEPROM access mode. */ CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_OFF); return (word); } /* * MII access routines are provided for the 8129, which * doesn't have a built-in PHY. For the 8139, we fake things * up by diverting rtk_phy_readreg()/rtk_phy_writereg() to the * direct access PHY registers. */ #define MII_SET(x) \ CSR_WRITE_1(sc, RTK_MII, \ CSR_READ_1(sc, RTK_MII) | (x)) #define MII_CLR(x) \ CSR_WRITE_1(sc, RTK_MII, \ CSR_READ_1(sc, RTK_MII) & ~(x)) /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ STATIC void rtk_mii_sync(sc) struct rtk_softc *sc; { int i; MII_SET(RTK_MII_DIR|RTK_MII_DATAOUT); for (i = 0; i < 32; i++) { MII_SET(RTK_MII_CLK); DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); } } /* * Clock a series of bits through the MII. */ STATIC void rtk_mii_send(sc, bits, cnt) struct rtk_softc *sc; u_int32_t bits; int cnt; { int i; MII_CLR(RTK_MII_CLK); for (i = cnt; i > 0; i--) { if (bits & (1 << (i - 1))) { MII_SET(RTK_MII_DATAOUT); } else { MII_CLR(RTK_MII_DATAOUT); } DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); } } /* * Read an PHY register through the MII. */ STATIC int rtk_mii_readreg(sc, frame) struct rtk_softc *sc; struct rtk_mii_frame *frame; { int i, ack, s; s = splnet(); /* * Set up frame for RX. */ frame->mii_stdelim = RTK_MII_STARTDELIM; frame->mii_opcode = RTK_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; CSR_WRITE_2(sc, RTK_MII, 0); /* * Turn on data xmit. */ MII_SET(RTK_MII_DIR); rtk_mii_sync(sc); /* * Send command/address info. */ rtk_mii_send(sc, frame->mii_stdelim, 2); rtk_mii_send(sc, frame->mii_opcode, 2); rtk_mii_send(sc, frame->mii_phyaddr, 5); rtk_mii_send(sc, frame->mii_regaddr, 5); /* Idle bit */ MII_CLR((RTK_MII_CLK|RTK_MII_DATAOUT)); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); /* Turn off xmit. */ MII_CLR(RTK_MII_DIR); /* Check for ack */ MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); ack = CSR_READ_2(sc, RTK_MII) & RTK_MII_DATAIN; /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for (i = 0; i < 16; i++) { MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); } goto fail; } for (i = 16; i > 0; i--) { MII_CLR(RTK_MII_CLK); DELAY(1); if (!ack) { if (CSR_READ_2(sc, RTK_MII) & RTK_MII_DATAIN) frame->mii_data |= 1 << (i - 1); DELAY(1); } MII_SET(RTK_MII_CLK); DELAY(1); } fail: MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); splx(s); if (ack) return (1); return (0); } /* * Write to a PHY register through the MII. */ STATIC int rtk_mii_writereg(sc, frame) struct rtk_softc *sc; struct rtk_mii_frame *frame; { int s; s = splnet(); /* * Set up frame for TX. */ frame->mii_stdelim = RTK_MII_STARTDELIM; frame->mii_opcode = RTK_MII_WRITEOP; frame->mii_turnaround = RTK_MII_TURNAROUND; /* * Turn on data output. */ MII_SET(RTK_MII_DIR); rtk_mii_sync(sc); rtk_mii_send(sc, frame->mii_stdelim, 2); rtk_mii_send(sc, frame->mii_opcode, 2); rtk_mii_send(sc, frame->mii_phyaddr, 5); rtk_mii_send(sc, frame->mii_regaddr, 5); rtk_mii_send(sc, frame->mii_turnaround, 2); rtk_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ MII_SET(RTK_MII_CLK); DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); /* * Turn off xmit. */ MII_CLR(RTK_MII_DIR); splx(s); return (0); } STATIC int rtk_phy_readreg(self, phy, reg) struct device *self; int phy, reg; { struct rtk_softc *sc = (void *)self; struct rtk_mii_frame frame; int rval = 0; int rtk8139_reg = 0; if (sc->rtk_type == RTK_8139) { if (phy != 7) return (0); switch(reg) { case MII_BMCR: rtk8139_reg = RTK_BMCR; break; case MII_BMSR: rtk8139_reg = RTK_BMSR; break; case MII_ANAR: rtk8139_reg = RTK_ANAR; break; case MII_ANER: rtk8139_reg = RTK_ANER; break; case MII_ANLPAR: rtk8139_reg = RTK_LPAR; break; default: #if 0 printf("%s: bad phy register\n", sc->sc_dev.dv_xname); #endif return (0); } rval = CSR_READ_2(sc, rtk8139_reg); return (rval); } memset((char *)&frame, 0, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; rtk_mii_readreg(sc, &frame); return (frame.mii_data); } STATIC void rtk_phy_writereg(self, phy, reg, data) struct device *self; int phy, reg; int data; { struct rtk_softc *sc = (void *)self; struct rtk_mii_frame frame; int rtk8139_reg = 0; if (sc->rtk_type == RTK_8139) { if (phy != 7) return; switch(reg) { case MII_BMCR: rtk8139_reg = RTK_BMCR; break; case MII_BMSR: rtk8139_reg = RTK_BMSR; break; case MII_ANAR: rtk8139_reg = RTK_ANAR; break; case MII_ANER: rtk8139_reg = RTK_ANER; break; case MII_ANLPAR: rtk8139_reg = RTK_LPAR; break; default: #if 0 printf("%s: bad phy register\n", sc->sc_dev.dv_xname); #endif return; } CSR_WRITE_2(sc, rtk8139_reg, data); return; } memset((char *)&frame, 0, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; rtk_mii_writereg(sc, &frame); } STATIC void rtk_phy_statchg(v) struct device *v; { /* Nothing to do. */ } #define rtk_calchash(addr) \ (ether_crc32_be((addr), ETHER_ADDR_LEN) >> 26) /* * Program the 64-bit multicast hash filter. */ STATIC void rtk_setmulti(sc) struct rtk_softc *sc; { struct ifnet *ifp; int h = 0; u_int32_t hashes[2] = { 0, 0 }; u_int32_t rxfilt; int mcnt = 0; struct ether_multi *enm; struct ether_multistep step; ifp = &sc->ethercom.ec_if; rxfilt = CSR_READ_4(sc, RTK_RXCFG); if (ifp->if_flags & IFF_PROMISC) { allmulti: ifp->if_flags |= IFF_ALLMULTI; rxfilt |= RTK_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RTK_RXCFG, rxfilt); CSR_WRITE_4(sc, RTK_MAR0, 0xFFFFFFFF); CSR_WRITE_4(sc, RTK_MAR4, 0xFFFFFFFF); return; } /* first, zot all the existing hash bits */ CSR_WRITE_4(sc, RTK_MAR0, 0); CSR_WRITE_4(sc, RTK_MAR4, 0); /* now program new ones */ ETHER_FIRST_MULTI(step, &sc->ethercom, enm); while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN) != 0) goto allmulti; h = rtk_calchash(enm->enm_addrlo); if (h < 32) hashes[0] |= (1 << h); else hashes[1] |= (1 << (h - 32)); mcnt++; ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; if (mcnt) rxfilt |= RTK_RXCFG_RX_MULTI; else rxfilt &= ~RTK_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RTK_RXCFG, rxfilt); CSR_WRITE_4(sc, RTK_MAR0, hashes[0]); CSR_WRITE_4(sc, RTK_MAR4, hashes[1]); } void rtk_reset(sc) struct rtk_softc *sc; { int i; CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_RESET); for (i = 0; i < RTK_TIMEOUT; i++) { DELAY(10); if ((CSR_READ_1(sc, RTK_COMMAND) & RTK_CMD_RESET) == 0) break; } if (i == RTK_TIMEOUT) printf("%s: reset never completed!\n", sc->sc_dev.dv_xname); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ void rtk_attach(sc) struct rtk_softc *sc; { struct ifnet *ifp; struct rtk_tx_desc *txd; u_int16_t val; u_int8_t eaddr[ETHER_ADDR_LEN]; int error; int i, addr_len; callout_init(&sc->rtk_tick_ch); /* * Check EEPROM type 9346 or 9356. */ if (rtk_read_eeprom(sc, RTK_EE_ID, RTK_EEADDR_LEN1) == 0x8129) addr_len = RTK_EEADDR_LEN1; else addr_len = RTK_EEADDR_LEN0; /* * Get station address. */ val = rtk_read_eeprom(sc, RTK_EE_EADDR0, addr_len); eaddr[0] = val & 0xff; eaddr[1] = val >> 8; val = rtk_read_eeprom(sc, RTK_EE_EADDR1, addr_len); eaddr[2] = val & 0xff; eaddr[3] = val >> 8; val = rtk_read_eeprom(sc, RTK_EE_EADDR2, addr_len); eaddr[4] = val & 0xff; eaddr[5] = val >> 8; if ((error = bus_dmamem_alloc(sc->sc_dmat, RTK_RXBUFLEN + 16, PAGE_SIZE, 0, &sc->sc_dmaseg, 1, &sc->sc_dmanseg, BUS_DMA_NOWAIT)) != 0) { printf("%s: can't allocate recv buffer, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg, RTK_RXBUFLEN + 16, (caddr_t *)&sc->rtk_rx_buf, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { printf("%s: can't map recv buffer, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, RTK_RXBUFLEN + 16, 1, RTK_RXBUFLEN + 16, 0, BUS_DMA_NOWAIT, &sc->recv_dmamap)) != 0) { printf("%s: can't create recv buffer DMA map, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->recv_dmamap, sc->rtk_rx_buf, RTK_RXBUFLEN + 16, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT)) != 0) { printf("%s: can't load recv buffer DMA map, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_3; } for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &txd->txd_dmamap)) != 0) { printf("%s: can't create snd buffer DMA map," " error = %d\n", sc->sc_dev.dv_xname, error); goto fail_4; } txd->txd_txaddr = RTK_TXADDR0 + (i * 4); txd->txd_txstat = RTK_TXSTAT0 + (i * 4); } SIMPLEQ_INIT(&sc->rtk_tx_free); SIMPLEQ_INIT(&sc->rtk_tx_dirty); /* * From this point forward, the attachment cannot fail. A failure * before this releases all resources thar may have been * allocated. */ sc->sc_flags |= RTK_ATTACHED; /* Init Early TX threshold. */ sc->sc_txthresh = TXTH_256; /* Reset the adapter. */ rtk_reset(sc); printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, ether_sprintf(eaddr)); ifp = &sc->ethercom.ec_if; ifp->if_softc = sc; strcpy(ifp->if_xname, sc->sc_dev.dv_xname); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = rtk_ioctl; ifp->if_start = rtk_start; ifp->if_watchdog = rtk_watchdog; ifp->if_init = rtk_init; ifp->if_stop = rtk_stop; IFQ_SET_READY(&ifp->if_snd); /* * Do ifmedia setup. */ sc->mii.mii_ifp = ifp; sc->mii.mii_readreg = rtk_phy_readreg; sc->mii.mii_writereg = rtk_phy_writereg; sc->mii.mii_statchg = rtk_phy_statchg; ifmedia_init(&sc->mii.mii_media, IFM_IMASK, rtk_ifmedia_upd, rtk_ifmedia_sts); mii_attach(&sc->sc_dev, &sc->mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); /* Choose a default media. */ if (LIST_FIRST(&sc->mii.mii_phys) == NULL) { ifmedia_add(&sc->mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->mii.mii_media, IFM_ETHER|IFM_NONE); } else { ifmedia_set(&sc->mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * Call MI attach routines. */ if_attach(ifp); ether_ifattach(ifp, eaddr); /* * Make sure the interface is shutdown during reboot. */ sc->sc_sdhook = shutdownhook_establish(rtk_shutdown, sc); if (sc->sc_sdhook == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); /* * Add a suspend hook to make sure we come back up after a * resume. */ sc->sc_powerhook = powerhook_establish(rtk_power, sc); if (sc->sc_powerhook == NULL) printf("%s: WARNING: unable to establish power hook\n", sc->sc_dev.dv_xname); return; fail_4: for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if (txd->txd_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, txd->txd_dmamap); } fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->recv_dmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->rtk_rx_buf, RTK_RXBUFLEN + 16); fail_1: bus_dmamem_free(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg); fail_0: return; } /* * Initialize the transmit descriptors. */ STATIC int rtk_list_tx_init(sc) struct rtk_softc *sc; { struct rtk_tx_desc *txd; int i; while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_free)) != NULL) SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_free, txd_q); for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; CSR_WRITE_4(sc, txd->txd_txaddr, 0); SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_free, txd, txd_q); } return (0); } /* * rtk_activate: * Handle device activation/deactivation requests. */ int rtk_activate(self, act) struct device *self; enum devact act; { struct rtk_softc *sc = (void *) self; int s, error = 0; s = splnet(); switch (act) { case DVACT_ACTIVATE: error = EOPNOTSUPP; break; case DVACT_DEACTIVATE: mii_activate(&sc->mii, act, MII_PHY_ANY, MII_OFFSET_ANY); if_deactivate(&sc->ethercom.ec_if); break; } splx(s); return (error); } /* * rtk_detach: * Detach a rtk interface. */ int rtk_detach(sc) struct rtk_softc *sc; { struct ifnet *ifp = &sc->ethercom.ec_if; struct rtk_tx_desc *txd; int i; /* * Succeed now if there isn't any work to do. */ if ((sc->sc_flags & RTK_ATTACHED) == 0) return (0); /* Unhook our tick handler. */ callout_stop(&sc->rtk_tick_ch); /* Detach all PHYs. */ mii_detach(&sc->mii, MII_PHY_ANY, MII_OFFSET_ANY); /* Delete all remaining media. */ ifmedia_delete_instance(&sc->mii.mii_media, IFM_INST_ANY); ether_ifdetach(ifp); if_detach(ifp); for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if (txd->txd_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, txd->txd_dmamap); } bus_dmamap_destroy(sc->sc_dmat, sc->recv_dmamap); bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->rtk_rx_buf, RTK_RXBUFLEN + 16); bus_dmamem_free(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg); shutdownhook_disestablish(sc->sc_sdhook); powerhook_disestablish(sc->sc_powerhook); return (0); } /* * rtk_enable: * Enable the RTL81X9 chip. */ int rtk_enable(sc) struct rtk_softc *sc; { if (RTK_IS_ENABLED(sc) == 0 && sc->sc_enable != NULL) { if ((*sc->sc_enable)(sc) != 0) { printf("%s: device enable failed\n", sc->sc_dev.dv_xname); return (EIO); } sc->sc_flags |= RTK_ENABLED; } return (0); } /* * rtk_disable: * Disable the RTL81X9 chip. */ void rtk_disable(sc) struct rtk_softc *sc; { if (RTK_IS_ENABLED(sc) && sc->sc_disable != NULL) { (*sc->sc_disable)(sc); sc->sc_flags &= ~RTK_ENABLED; } } /* * rtk_power: * Power management (suspend/resume) hook. */ void rtk_power(why, arg) int why; void *arg; { struct rtk_softc *sc = (void *) arg; struct ifnet *ifp = &sc->ethercom.ec_if; int s; s = splnet(); switch (why) { case PWR_SUSPEND: case PWR_STANDBY: rtk_stop(ifp, 0); if (sc->sc_power != NULL) (*sc->sc_power)(sc, why); break; case PWR_RESUME: if (ifp->if_flags & IFF_UP) { if (sc->sc_power != NULL) (*sc->sc_power)(sc, why); rtk_init(ifp); } break; case PWR_SOFTSUSPEND: case PWR_SOFTSTANDBY: case PWR_SOFTRESUME: break; } splx(s); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. * * You know there's something wrong with a PCI bus-master chip design. * * The receive operation is badly documented in the datasheet, so I'll * attempt to document it here. The driver provides a buffer area and * places its base address in the RX buffer start address register. * The chip then begins copying frames into the RX buffer. Each frame * is preceded by a 32-bit RX status word which specifies the length * of the frame and certain other status bits. Each frame (starting with * the status word) is also 32-bit aligned. The frame length is in the * first 16 bits of the status word; the lower 15 bits correspond with * the 'rx status register' mentioned in the datasheet. * * Note: to make the Alpha happy, the frame payload needs to be aligned * on a 32-bit boundary. To achieve this, we copy the data to mbuf * shifted forward 2 bytes. */ STATIC void rtk_rxeof(sc) struct rtk_softc *sc; { struct mbuf *m; struct ifnet *ifp; caddr_t rxbufpos, dst; u_int total_len, wrap = 0; u_int32_t rxstat; u_int16_t cur_rx, new_rx; u_int16_t limit; u_int16_t rx_bytes = 0, max_bytes; ifp = &sc->ethercom.ec_if; cur_rx = (CSR_READ_2(sc, RTK_CURRXADDR) + 16) % RTK_RXBUFLEN; /* Do not try to read past this point. */ limit = CSR_READ_2(sc, RTK_CURRXBUF) % RTK_RXBUFLEN; if (limit < cur_rx) max_bytes = (RTK_RXBUFLEN - cur_rx) + limit; else max_bytes = limit - cur_rx; while((CSR_READ_1(sc, RTK_COMMAND) & RTK_CMD_EMPTY_RXBUF) == 0) { rxbufpos = sc->rtk_rx_buf + cur_rx; bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, RTK_RXSTAT_LEN, BUS_DMASYNC_POSTREAD); rxstat = le32toh(*(u_int32_t *)rxbufpos); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, RTK_RXSTAT_LEN, BUS_DMASYNC_PREREAD); /* * Here's a totally undocumented fact for you. When the * RealTek chip is in the process of copying a packet into * RAM for you, the length will be 0xfff0. If you spot a * packet header with this value, you need to stop. The * datasheet makes absolutely no mention of this and * RealTek should be shot for this. */ total_len = rxstat >> 16; if (total_len == RTK_RXSTAT_UNFINISHED) break; if ((rxstat & RTK_RXSTAT_RXOK) == 0 || total_len > ETHER_MAX_LEN) { ifp->if_ierrors++; /* * submitted by:[netbsd-pcmcia:00484] * Takahiro Kambe * obtain from: * FreeBSD if_rl.c rev 1.24->1.25 * */ #if 0 if (rxstat & (RTK_RXSTAT_BADSYM|RTK_RXSTAT_RUNT| RTK_RXSTAT_GIANT|RTK_RXSTAT_CRCERR| RTK_RXSTAT_ALIGNERR)) { CSR_WRITE_2(sc, RTK_COMMAND, RTK_CMD_TX_ENB); CSR_WRITE_2(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); CSR_WRITE_4(sc, RTK_RXCFG, RTK_RXCFG_CONFIG); CSR_WRITE_4(sc, RTK_RXADDR, sc->recv_dmamap->dm_segs[0].ds_addr); cur_rx = 0; } break; #else rtk_init(ifp); return; #endif } /* No errors; receive the packet. */ rx_bytes += total_len + RTK_RXSTAT_LEN; /* * Avoid trying to read more bytes than we know * the chip has prepared for us. */ if (rx_bytes > max_bytes) break; /* * Skip the status word, wrapping around to the beginning * of the Rx area, if necessary. */ cur_rx = (cur_rx + RTK_RXSTAT_LEN) % RTK_RXBUFLEN; rxbufpos = sc->rtk_rx_buf + cur_rx; /* * Compute the number of bytes at which the packet * will wrap to the beginning of the ring buffer. */ wrap = RTK_RXBUFLEN - cur_rx; /* * Compute where the next pending packet is. */ if (total_len > wrap) new_rx = total_len - wrap; else new_rx = cur_rx + total_len; /* Round up to 32-bit boundary. */ new_rx = (new_rx + 3) & ~3; /* * Now allocate an mbuf (and possibly a cluster) to hold * the packet. Note we offset the packet 2 bytes so that * data after the Ethernet header will be 4-byte aligned. */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { printf("%s: unable to allocate Rx mbuf\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; goto next_packet; } if (total_len > (MHLEN - RTK_ETHER_ALIGN)) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Rx cluster\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; m_freem(m); m = NULL; goto next_packet; } } m->m_data += RTK_ETHER_ALIGN; /* for alignment */ m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = total_len; dst = mtod(m, caddr_t); /* * If the packet wraps, copy up to the wrapping point. */ if (total_len > wrap) { bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, wrap, BUS_DMASYNC_POSTREAD); memcpy(dst, rxbufpos, wrap); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, wrap, BUS_DMASYNC_PREREAD); cur_rx = 0; rxbufpos = sc->rtk_rx_buf; total_len -= wrap; dst += wrap; } /* * ...and now the rest. */ bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, total_len, BUS_DMASYNC_POSTREAD); memcpy(dst, rxbufpos, total_len); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, total_len, BUS_DMASYNC_PREREAD); next_packet: CSR_WRITE_2(sc, RTK_CURRXADDR, new_rx - 16); cur_rx = new_rx; if (m == NULL) continue; /* * The RealTek chip includes the CRC with every * incoming packet. */ m->m_flags |= M_HASFCS; ifp->if_ipackets++; #if NBPFILTER > 0 if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* pass it on. */ (*ifp->if_input)(ifp, m); } } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ STATIC void rtk_txeof(sc) struct rtk_softc *sc; { struct ifnet *ifp; struct rtk_tx_desc *txd; u_int32_t txstat; ifp = &sc->ethercom.ec_if; /* Clear the timeout timer. */ ifp->if_timer = 0; /* * Go through our tx list and free mbufs for those * frames that have been uploaded. */ while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) { txstat = CSR_READ_4(sc, txd->txd_txstat); if ((txstat & (RTK_TXSTAT_TX_OK| RTK_TXSTAT_TX_UNDERRUN|RTK_TXSTAT_TXABRT)) == 0) break; SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); bus_dmamap_sync(sc->sc_dmat, txd->txd_dmamap, 0, txd->txd_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txd->txd_dmamap); m_freem(txd->txd_mbuf); txd->txd_mbuf = NULL; ifp->if_collisions += (txstat & RTK_TXSTAT_COLLCNT) >> 24; if (txstat & RTK_TXSTAT_TX_OK) ifp->if_opackets++; else { ifp->if_oerrors++; /* * Increase Early TX threshold if underrun occurred. * Increase step 64 bytes. */ if (txstat & RTK_TXSTAT_TX_UNDERRUN) { printf("%s: transmit underrun;", sc->sc_dev.dv_xname); if (sc->sc_txthresh < TXTH_MAX) { sc->sc_txthresh += 2; printf(" new threshold: %d bytes", sc->sc_txthresh * 32); } printf("\n"); } if (txstat & (RTK_TXSTAT_TXABRT|RTK_TXSTAT_OUTOFWIN)) CSR_WRITE_4(sc, RTK_TXCFG, RTK_TXCFG_CONFIG); } SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_free, txd, txd_q); ifp->if_flags &= ~IFF_OACTIVE; } } int rtk_intr(arg) void *arg; { struct rtk_softc *sc; struct ifnet *ifp; u_int16_t status; int handled = 0; sc = arg; ifp = &sc->ethercom.ec_if; /* Disable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, 0x0000); for (;;) { status = CSR_READ_2(sc, RTK_ISR); if (status) CSR_WRITE_2(sc, RTK_ISR, status); handled = 1; if ((status & RTK_INTRS) == 0) break; if (status & RTK_ISR_RX_OK) rtk_rxeof(sc); if (status & RTK_ISR_RX_ERR) rtk_rxeof(sc); if (status & (RTK_ISR_TX_OK|RTK_ISR_TX_ERR)) rtk_txeof(sc); if (status & RTK_ISR_SYSTEM_ERR) { rtk_reset(sc); rtk_init(ifp); } } /* Re-enable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS); if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) rtk_start(ifp); return (handled); } /* * Main transmit routine. */ STATIC void rtk_start(ifp) struct ifnet *ifp; { struct rtk_softc *sc; struct rtk_tx_desc *txd; struct mbuf *m_head = NULL, *m_new; int error, len; sc = ifp->if_softc; while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_free)) != NULL) { IFQ_POLL(&ifp->if_snd, m_head); if (m_head == NULL) break; m_new = NULL; /* * Load the DMA map. If this fails, the packet didn't * fit in one DMA segment, and we need to copy. Note, * the packet must also be aligned. */ if ((mtod(m_head, uintptr_t) & 3) != 0 || bus_dmamap_load_mbuf(sc->sc_dmat, txd->txd_dmamap, m_head, BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { printf("%s: unable to allocate Tx mbuf\n", sc->sc_dev.dv_xname); break; } if (m_head->m_pkthdr.len > MHLEN) { MCLGET(m_new, M_DONTWAIT); if ((m_new->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Tx " "cluster\n", sc->sc_dev.dv_xname); m_freem(m_new); break; } } m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t)); m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; error = bus_dmamap_load_mbuf(sc->sc_dmat, txd->txd_dmamap, m_new, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load Tx buffer, " "error = %d\n", sc->sc_dev.dv_xname, error); break; } } IFQ_DEQUEUE(&ifp->if_snd, m_head); if (m_new != NULL) { m_freem(m_head); m_head = m_new; } txd->txd_mbuf = m_head; SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_free, txd_q); SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_dirty, txd, txd_q); #if NBPFILTER > 0 /* * If there's a BPF listener, bounce a copy of this frame * to him. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m_head); #endif /* * Transmit the frame. */ bus_dmamap_sync(sc->sc_dmat, txd->txd_dmamap, 0, txd->txd_dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); len = txd->txd_dmamap->dm_segs[0].ds_len; if (len < (ETHER_MIN_LEN - ETHER_CRC_LEN)) len = (ETHER_MIN_LEN - ETHER_CRC_LEN); CSR_WRITE_4(sc, txd->txd_txaddr, txd->txd_dmamap->dm_segs[0].ds_addr); CSR_WRITE_4(sc, txd->txd_txstat, RTK_TX_THRESH(sc) | len); } /* * We broke out of the loop because all our TX slots are * full. Mark the NIC as busy until it drains some of the * packets from the queue. */ if (SIMPLEQ_EMPTY(&sc->rtk_tx_free)) ifp->if_flags |= IFF_OACTIVE; /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } STATIC int rtk_init(ifp) struct ifnet *ifp; { struct rtk_softc *sc = ifp->if_softc; int error = 0, i; u_int32_t rxcfg; if ((error = rtk_enable(sc)) != 0) goto out; /* * Cancel pending I/O. */ rtk_stop(ifp, 0); /* Init our MAC address */ for (i = 0; i < ETHER_ADDR_LEN; i++) { CSR_WRITE_1(sc, RTK_IDR0 + i, LLADDR(ifp->if_sadl)[i]); } /* Init the RX buffer pointer register. */ bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, 0, sc->recv_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); CSR_WRITE_4(sc, RTK_RXADDR, sc->recv_dmamap->dm_segs[0].ds_addr); /* Init TX descriptors. */ rtk_list_tx_init(sc); /* Init Early TX threshold. */ sc->sc_txthresh = TXTH_256; /* * Enable transmit and receive. */ CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); /* * Set the initial TX and RX configuration. */ CSR_WRITE_4(sc, RTK_TXCFG, RTK_TXCFG_CONFIG); CSR_WRITE_4(sc, RTK_RXCFG, RTK_RXCFG_CONFIG); /* Set the individual bit to receive frames for this host only. */ rxcfg = CSR_READ_4(sc, RTK_RXCFG); rxcfg |= RTK_RXCFG_RX_INDIV; /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { rxcfg |= RTK_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } else { rxcfg &= ~RTK_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } /* * Set capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) { rxcfg |= RTK_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } else { rxcfg &= ~RTK_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } /* * Program the multicast filter, if necessary. */ rtk_setmulti(sc); /* * Enable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS); /* Start RX/TX process. */ CSR_WRITE_4(sc, RTK_MISSEDPKT, 0); /* Enable receiver and transmitter. */ CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); CSR_WRITE_1(sc, RTK_CFG1, RTK_CFG1_DRVLOAD|RTK_CFG1_FULLDUPLEX); /* * Set current media. */ mii_mediachg(&sc->mii); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; callout_reset(&sc->rtk_tick_ch, hz, rtk_tick, sc); out: if (error) { ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; printf("%s: interface not running\n", sc->sc_dev.dv_xname); } return (error); } /* * Set media options. */ STATIC int rtk_ifmedia_upd(ifp) struct ifnet *ifp; { struct rtk_softc *sc; sc = ifp->if_softc; return (mii_mediachg(&sc->mii)); } /* * Report current media status. */ STATIC void rtk_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct rtk_softc *sc; sc = ifp->if_softc; mii_pollstat(&sc->mii); ifmr->ifm_status = sc->mii.mii_media_status; ifmr->ifm_active = sc->mii.mii_media_active; } STATIC int rtk_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { struct rtk_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; s = splnet(); switch (command) { case SIOCGIFMEDIA: case SIOCSIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->mii.mii_media, command); break; default: error = ether_ioctl(ifp, command, data); if (error == ENETRESET) { if (RTK_IS_ENABLED(sc)) { /* * Multicast list has changed. Set the * hardware filter accordingly. */ rtk_setmulti(sc); } error = 0; } break; } splx(s); return (error); } STATIC void rtk_watchdog(ifp) struct ifnet *ifp; { struct rtk_softc *sc; sc = ifp->if_softc; printf("%s: watchdog timeout\n", sc->sc_dev.dv_xname); ifp->if_oerrors++; rtk_txeof(sc); rtk_rxeof(sc); rtk_init(ifp); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ STATIC void rtk_stop(ifp, disable) struct ifnet *ifp; int disable; { struct rtk_softc *sc = ifp->if_softc; struct rtk_tx_desc *txd; callout_stop(&sc->rtk_tick_ch); mii_down(&sc->mii); CSR_WRITE_1(sc, RTK_COMMAND, 0x00); CSR_WRITE_2(sc, RTK_IMR, 0x0000); /* * Free the TX list buffers. */ while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) { SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); bus_dmamap_unload(sc->sc_dmat, txd->txd_dmamap); m_freem(txd->txd_mbuf); txd->txd_mbuf = NULL; CSR_WRITE_4(sc, txd->txd_txaddr, 0); } if (disable) rtk_disable(sc); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ STATIC void rtk_shutdown(vsc) void *vsc; { struct rtk_softc *sc = (struct rtk_softc *)vsc; rtk_stop(&sc->ethercom.ec_if, 0); } STATIC void rtk_tick(arg) void *arg; { struct rtk_softc *sc = arg; int s = splnet(); mii_tick(&sc->mii); splx(s); callout_reset(&sc->rtk_tick_ch, hz, rtk_tick, sc); }