/* $NetBSD: if_sn.h,v 1.2 1996/07/16 23:24:15 thorpej Exp $ */ /* * Copyright (c) 1991 Algorithmics Ltd (http://www.algor.co.uk) * You may use, copy, and modify this program so long as you retain the * copyright line. */ /* * if_sonic.h -- National Semiconductor DP83932BVF (SONIC) */ /* * Accessing SONIC data structures and registers as 32 bit values * makes code endianess independent. The SONIC is however always in * bigendian mode so it is necessary to ensure that data structures shared * between the CPU and the SONIC are always in bigendian order. */ /* * Receive Resource Descriptor * This structure describes the buffers into which packets * will be received. Note that more than one packet may be * packed into a single buffer if constraints permit. */ #if SONICDW == 32 struct RXrsrc { u_long buff_ptrlo; /* buffer address LO */ u_long buff_ptrhi; /* buffer address HI */ u_long buff_wclo; /* buffer size (16bit words) LO */ u_long buff_wchi; /* buffer size (16bit words) HI */ }; #endif /* * Receive Descriptor * This structure holds information about packets received. */ #if SONICDW == 32 struct RXpkt { u_long status; /* + receive status */ u_long byte_count; /* + packet byte count (including FCS) */ u_long pkt_ptrlo; /* + packet data LO (in RBA) */ u_long pkt_ptrhi; /* + packet data HI (in RBA) */ u_long seq_no; /* + RBA sequence numbers */ u_long rlink; /* link to next receive descriptor */ u_long in_use; /* + packet available to SONIC */ u_long pad; /* pad to multiple of 16 bytes */ }; #endif #define RBASEQ(x) (((x)>>8)&0xff) #define PSNSEQ(x) ((x) & 0xff) /* * Transmit Descriptor * This structure holds information about packets to be transmitted. */ #define FRAGMAX 31 /* maximum number of fragments in a packet */ #if SONICDW == 32 struct TXpkt { u_long status; /* + transmitted packet status */ u_long config; /* transmission configuration */ u_long pkt_size; /* entire packet size in bytes */ u_long frag_count; /* # fragments in packet */ union { struct { u_long _frag_ptrlo; /* pointer to packet fragment LO */ u_long _frag_ptrhi; /* pointer to packet fragment HI */ u_long _frag_size; /* fragment size */ } u_frag; struct { u_long _tlink; /* link to next transmit descriptor */ } u_link; } u[FRAGMAX+1]; /* +1 makes tcp->u[FRAGMAX].u_link.link valid! */ }; #endif #define frag_ptrlo u_frag._frag_ptrlo #define frag_ptrhi u_frag._frag_ptrhi #define frag_size u_frag._frag_size #define tlink u_link._tlink #define EOL 0x0001 /* end of list marker for link fields */ #define MAXCAM 16 /* number of user entries in CAM */ #if SONICDW == 32 struct CDA { struct { u_long cam_ep; /* CAM Entry Pointer */ u_long cam_ap0; /* CAM Address Port 0 xx-xx-xx-xx-YY-YY */ u_long cam_ap1; /* CAM Address Port 1 xx-xx-YY-YY-xxxx */ u_long cam_ap2; /* CAM Address Port 2 YY-YY-xx-xx-xx-xx */ } desc[MAXCAM]; u_long enable; /* mask enabling CAM entries */ }; #endif /* * SONIC registers as seen by the processor */ struct sonic_reg { volatile u_long s_cr; /* 00: Command */ volatile u_long s_dcr; /* 01: Data Configuration */ volatile u_long s_rcr; /* 02: Receive Control */ volatile u_long s_tcr; /* 03: Transmit Control */ volatile u_long s_imr; /* 04: Interrupt Mask */ volatile u_long s_isr; /* 05: Interrupt Status */ volatile u_long s_utda; /* 06: Upper Transmit Descriptor Address */ volatile u_long s_ctda; /* 07: Current Transmit Descriptor Address */ volatile u_long _s_tps; /* 08* Transmit Packet Size */ volatile u_long _s_tfc; /* 09* Transmit Fragment Count */ volatile u_long _s_tsa0; /* 0a* Transmit Start Address 0 */ volatile u_long _s_tsa1; /* 0b* Transmit Start Address 1 */ volatile u_long _s_tfs; /* 0c* Transmit Fragment Size */ volatile u_long s_urda; /* 0d: Upper Receive Descriptor Address */ volatile u_long s_crda; /* 0e: Current Receive Descriptor Address */ volatile u_long _s_crba0; /* 0f* Current Receive Buffer Address 0 */ volatile u_long _s_crba1; /* 10* Current Receive Buffer Address 1 */ volatile u_long _s_rbwc0; /* 11* Remaining Buffer Word Count 0 */ volatile u_long _s_rbwc1; /* 12* Remaining Buffer Word Count 1 */ volatile u_long s_eobc; /* 13: End Of Buffer Word Count */ volatile u_long s_urra; /* 14: Upper Receive Resource Address */ volatile u_long s_rsa; /* 15: Resource Start Address */ volatile u_long s_rea; /* 16: Resource End Address */ volatile u_long s_rrp; /* 17: Resource Read Pointer */ volatile u_long s_rwp; /* 18: Resource Write Pointer */ volatile u_long _s_trba0; /* 19* Temporary Receive Buffer Address 0 */ volatile u_long _s_trba1; /* 1a* Temporary Receive Buffer Address 1 */ volatile u_long _s_tbwc0; /* 1b* Temporary Buffer Word Count 0 */ volatile u_long _s_tbwc1; /* 1c* Temporary Buffer Word Count 1 */ volatile u_long _s_addr0; /* 1d* Address Generator 0 */ volatile u_long _s_addr1; /* 1e* Address Generator 1 */ volatile u_long _s_llfa; /* 1f* Last Link Field Address */ volatile u_long _s_ttda; /* 20* Temp Transmit Descriptor Address */ volatile u_long s_cep; /* 21: CAM Entry Pointer */ volatile u_long s_cap2; /* 22: CAM Address Port 2 */ volatile u_long s_cap1; /* 23: CAM Address Port 1 */ volatile u_long s_cap0; /* 24: CAM Address Port 0 */ volatile u_long s_ce; /* 25: CAM Enable */ volatile u_long s_cdp; /* 26: CAM Descriptor Pointer */ volatile u_long s_cdc; /* 27: CAM Descriptor Count */ volatile u_long s_sr; /* 28: Silicon Revision */ volatile u_long s_wt0; /* 29: Watchdog Timer 0 */ volatile u_long s_wt1; /* 2a: Watchdog Timer 1 */ volatile u_long s_rsc; /* 2b: Receive Sequence Counter */ volatile u_long s_crct; /* 2c: CRC Error Tally */ volatile u_long s_faet; /* 2d: FAE Tally */ volatile u_long s_mpt; /* 2e: Missed Packet Tally */ volatile u_long _s_mdt; /* 2f* Maximum Deferral Timer */ volatile u_long _s_rtc; /* 30* Receive Test Control */ volatile u_long _s_ttc; /* 31* Transmit Test Control */ volatile u_long _s_dtc; /* 32* DMA Test Control */ volatile u_long _s_cc0; /* 33* CAM Comparison 0 */ volatile u_long _s_cc1; /* 34* CAM Comparison 1 */ volatile u_long _s_cc2; /* 35* CAM Comparison 2 */ volatile u_long _s_cm; /* 36* CAM Match */ volatile u_long :32; /* 37* reserved */ volatile u_long :32; /* 38* reserved */ volatile u_long _s_rbc; /* 39* Receiver Byte Count */ volatile u_long :32; /* 3a* reserved */ volatile u_long _s_tbo; /* 3b* Transmitter Backoff Counter */ volatile u_long _s_trc; /* 3c* Transmitter Random Counter */ volatile u_long _s_tbm; /* 3d* Transmitter Backoff Mask */ volatile u_long :32; /* 3e* Reserved */ volatile u_long s_dcr2; /* 3f Data Configuration 2 (AVF) */ }; /* * Register Interpretations */ /* * The command register is used for issuing commands to the SONIC. * With the exception of CR_RST, the bit is reset when the operation * completes. */ #define CR_LCAM 0x0200 /* load CAM with descriptor at s_cdp */ #define CR_RRRA 0x0100 /* read next RRA descriptor at s_rrp */ #define CR_RST 0x0080 /* software reset */ #define CR_ST 0x0020 /* start timer */ #define CR_STP 0x0010 /* stop timer */ #define CR_RXEN 0x0008 /* receiver enable */ #define CR_RXDIS 0x0004 /* receiver disable */ #define CR_TXP 0x0002 /* transmit packets */ #define CR_HTX 0x0001 /* halt transmission */ /* * The data configuration register establishes the SONIC's bus cycle * operation. This register can only be accessed when the SONIC is in * reset mode (s_cr.CR_RST is set.) */ #define DCR_EXBUS 0x8000 /* extended bus mode (AVF) */ #define DCR_LBR 0x2000 /* latched bus retry */ #define DCR_PO1 0x1000 /* programmable output 1 */ #define DCR_PO0 0x0800 /* programmable output 0 */ #define DCR_STERM 0x0400 /* synchronous termination */ #define DCR_USR1 0x0200 /* reflects USR1 input pin */ #define DCR_USR0 0x0100 /* reflects USR0 input pin */ #define DCR_WC1 0x0080 /* wait state control 1 */ #define DCR_WC0 0x0040 /* wait state control 0 */ #define DCR_DW 0x0020 /* data width select */ #define DCR_BMS 0x0010 /* DMA block mode select */ #define DCR_RFT1 0x0008 /* receive FIFO threshold control 1 */ #define DCR_RFT0 0x0004 /* receive FIFO threshold control 0 */ #define DCR_TFT1 0x0002 /* transmit FIFO threshold control 1 */ #define DCR_TFT0 0x0001 /* transmit FIFO threshold control 0 */ /* data configuration register aliases */ #define DCR_SYNC DCR_STERM /* synchronous (memory cycle 2 clocks) */ #define DCR_ASYNC 0 /* asynchronous (memory cycle 3 clocks) */ #define DCR_WAIT0 0 /* 0 wait states added */ #define DCR_WAIT1 DCR_WC0 /* 1 wait state added */ #define DCR_WAIT2 DCR_WC1 /* 2 wait states added */ #define DCR_WAIT3 (DCR_WC1|DCR_WC0) /* 3 wait states added */ #define DCR_DW16 0 /* use 16-bit DMA accesses */ #define DCR_DW32 DCR_DW /* use 32-bit DMA accesses */ #define DCR_DMAEF 0 /* DMA until TX/RX FIFO has emptied/filled */ #define DCR_DMABLOCK DCR_BMS /* DMA until RX/TX threshold crossed */ #define DCR_RFT4 0 /* receive threshold 4 bytes */ #define DCR_RFT8 DCR_RFT0 /* receive threshold 8 bytes */ #define DCR_RFT16 DCR_RFT1 /* receive threshold 16 bytes */ #define DCR_RFT24 (DCR_RFT1|DCR_RFT0) /* receive threshold 24 bytes */ #define DCR_TFT8 0 /* transmit threshold 8 bytes */ #define DCR_TFT16 DCR_TFT0 /* transmit threshold 16 bytes */ #define DCR_TFT24 DCR_TFT1 /* transmit threshold 24 bytes */ #define DCR_TFT28 (DCR_TFT1|DCR_TFT0) /* transmit threshold 28 bytes */ /* * The receive control register is used to filter incoming packets and * provides status information on packets received. * The contents of the register are copied into the RXpkt.status field * when a packet is received. RCR_MC - RCR_PRX are then reset. */ #define RCR_ERR 0x8000 /* accept packets with CRC errors */ #define RCR_RNT 0x4000 /* accept runt (length < 64) packets */ #define RCR_BRD 0x2000 /* accept broadcast packets */ #define RCR_PRO 0x1000 /* accept all physical address packets */ #define RCR_AMC 0x0800 /* accept all multicast packets */ #define RCR_LB1 0x0400 /* loopback control 1 */ #define RCR_LB0 0x0200 /* loopback control 0 */ #define RCR_MC 0x0100 /* multicast packet received */ #define RCR_BC 0x0080 /* broadcast packet received */ #define RCR_LPKT 0x0040 /* last packet in RBA (RBWC < EOBC) */ #define RCR_CRS 0x0020 /* carrier sense activity */ #define RCR_COL 0x0010 /* collision activity */ #define RCR_CRC 0x0008 /* CRC error */ #define RCR_FAE 0x0004 /* frame alignment error */ #define RCR_LBK 0x0002 /* loopback packet received */ #define RCR_PRX 0x0001 /* packet received without errors */ /* receiver control register aliases */ /* the loopback control bits provide the following options */ #define RCR_LBNONE 0 /* no loopback - normal operation */ #define RCR_LBMAC RCR_LB0 /* MAC loopback */ #define RCR_LBENDEC RCR_LB1 /* ENDEC loopback */ #define RCR_LBTRANS (RCR_LB1|RCR_LB0) /* transceiver loopback */ /* * The transmit control register controls the SONIC's transmit operations. * TCR_PINT - TCR_EXDIS are loaded from the TXpkt.config field at the * start of transmission. TCR_EXD-TCR_PTX are cleared at the beginning * of transmission and updated when the transmission is completed. */ #define TCR_PINT 0x8000 /* interrupt when transmission starts */ #define TCR_POWC 0x4000 /* program out of window collision timer */ #define TCR_CRCI 0x2000 /* transmit packet without 4 byte FCS */ #define TCR_EXDIS 0x1000 /* disable excessive deferral timer */ #define TCR_EXD 0x0400 /* excessive deferrals occurred (>3.2ms) */ #define TCR_DEF 0x0200 /* deferred transmissions occurred */ #define TCR_NCRS 0x0100 /* carrier not present during transmission */ #define TCR_CRSL 0x0080 /* carrier lost during transmission */ #define TCR_EXC 0x0040 /* excessive collisions (>16) detected */ #define TCR_OWC 0x0020 /* out of window (bad) collision occurred */ #define TCR_PMB 0x0008 /* packet monitored bad - the tansmitted * packet had a bad source address or CRC */ #define TCR_FU 0x0004 /* FIFO underrun (memory access failed) */ #define TCR_BCM 0x0002 /* byte count mismatch (TXpkt.pkt_size * != sum(TXpkt.frag_size) */ #define TCR_PTX 0x0001 /* packet transmitted without errors */ /* transmit control register aliases */ #define TCR_OWCSFD 0 /* start after start of frame delimiter */ #define TCR_OWCPRE TCR_POWC /* start after first bit of preamble */ /* * The interrupt mask register masks the interrupts that * are generated from the interrupt status register. * All reserved bits should be written with 0. */ #define IMR_BREN 0x4000 /* bus retry occurred enable */ #define IMR_HBLEN 0x2000 /* heartbeat lost enable */ #define IMR_LCDEN 0x1000 /* load CAM done interrupt enable */ #define IMR_PINTEN 0x0800 /* programmable interrupt enable */ #define IMR_PRXEN 0x0400 /* packet received enable */ #define IMR_PTXEN 0x0200 /* packet transmitted enable */ #define IMR_TXEREN 0x0100 /* transmit error enable */ #define IMR_TCEN 0x0080 /* timer complete enable */ #define IMR_RDEEN 0x0040 /* receive descriptors exhausted enable */ #define IMR_RBEEN 0x0020 /* receive buffers exhausted enable */ #define IMR_RBAEEN 0x0010 /* receive buffer area exceeded enable */ #define IMR_CRCEN 0x0008 /* CRC tally counter rollover enable */ #define IMR_FAEEN 0x0004 /* FAE tally counter rollover enable */ #define IMR_MPEN 0x0002 /* MP tally counter rollover enable */ #define IMR_RFOEN 0x0001 /* receive FIFO overrun enable */ /* * The interrupt status register indicates the source of an interrupt when * the INT pin goes active. The interrupt is acknowledged by writing * the appropriate bit(s) in this register. */ #define ISR_ALL 0xffff /* all interrupts */ #define ISR_BR 0x4000 /* bus retry occurred */ #define ISR_HBL 0x2000 /* CD heartbeat lost */ #define ISR_LCD 0x1000 /* load CAM command has completed */ #define ISR_PINT 0x0800 /* programmed interrupt from TXpkt.config */ #define ISR_PKTRX 0x0400 /* packet received */ #define ISR_TXDN 0x0200 /* no remaining packets to be transmitted */ #define ISR_TXER 0x0100 /* packet transmission caused error */ #define ISR_TC 0x0080 /* timer complete */ #define ISR_RDE 0x0040 /* receive descriptors exhausted */ #define ISR_RBE 0x0020 /* receive buffers exhausted */ #define ISR_RBAE 0x0010 /* receive buffer area exceeded */ #define ISR_CRC 0x0008 /* CRC tally counter rollover */ #define ISR_FAE 0x0004 /* FAE tally counter rollover */ #define ISR_MP 0x0002 /* MP tally counter rollover */ #define ISR_RFO 0x0001 /* receive FIFO overrun */ /* * The second data configuration register allows additional user defined * pins to be controlled. These bits are only available if s_dcr.DCR_EXBUS * is set. */ #define DCR2_EXPO3 0x8000 /* EXUSR3 output */ #define DCR2_EXPO2 0x4000 /* EXUSR2 output */ #define DCR2_EXPO1 0x2000 /* EXUSR1 output */ #define DCR2_EXPO0 0x1000 /* EXUSR0 output */ #define DCR2_PHL 0x0010 /* extend HOLD signal by 1/2 clock */ #define DCR2_LRDY 0x0008 /* set latched ready mode */ #define DCR2_PCM 0x0004 /* packet compress on match */ #define DCR2_PCNM 0x0002 /* packet compress on mismatch */ #define DCR2_RJM 0x0001 /* reject on match */