/* $NetBSD: ser.c,v 1.16 1994/11/29 03:38:48 briggs Exp $ */ /* * Copyright (c) 1982, 1986, 1990 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo, * Michael L. Finch, Bradley A. Grantham, and * Lawrence A. Kesteloot * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Alice Group. * 4. The names of the Alice Group or any of its members may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Hacked by Brad Parker, * added CTS input flow control * added DCD event detection * added software fifo's * * Mac II serial device interface * * Information used in this source was gleaned from low-memory * global variables in MacOS and the Advanced Micro Devices * 1992 Data Book/Handbook. */ #include "ser.h" #include #include #include #include #include #include #include #include #include #include #include #include "serreg.h" #include #include #include /*#define DEBUG*/ #undef DEBUG volatile unsigned char *sccA = (unsigned char *) 0x4000; static void serstart __P((register struct tty *)); static int serparam __P((register struct tty *, register struct termios *)); static int serctl __P((dev_t dev, int bits, int how)); extern int ser_intr __P((void)); static int ser_active = 0; static int nser = NSER; static int serdefaultrate = TTYDEF_SPEED; struct tty *ser_tty[NSER]; extern struct tty *constty; #define UNIT(x) minor(x) struct ser_status { unsigned char ddcd, dcts; /* delta (change) flags */ unsigned char dcd, cts; /* last state of signal */ unsigned char dtr, rts; /* current state of signal */ int oflo; /* s/w fifo over flow */ int over; /* h/w fifo over flow */ int flags; #define SER_BUSY 0x01 } ser_status[NSER]; #define SCC_INT 10 #define SCC_SPEED 11 /* SCC initialization string from Steve Allen (wormey@eskimo.com) */ static unsigned char ser_init_bytes[]={ 4, 0x44, /* Transmit/Receive control. Select Async or Sync mode and clock multiplier. */ 3, 0xc0, /* select receiver control. Bit d0 (rx enable) must be set to 0 at this time. */ 5, 0xe2, /* select transmit control. Bit d3 (tx enable) must be set to 0 at this time. */ 9, 0x06, /* select interrupt control. Bit d3 (mie) must be set to 0 at this time. */ 10, 0x00, /* miscellaneous control. */ 11, 0x50, /* clock control. */ 12, 0x04, /* time constant LB. */ 13, 0x00, /* time constant HB. */ 14, 0x00, /* miscellaneous control. Bit d0 (BR gen enable) must be set to 0 at this time. */ 3, 0xc1, /* set d0 (rx enable). */ 5, 0xea, /* set d3 (tx enable). */ 0, 0x80, /* reset txCRC. */ 14, 0x01, /* BR gen enable. Enable DPLL. */ 1, 0x00, /* make sure DMA not set. */ 15, 0x00, /* disable external interrupts. */ 0, 0x10, /* reset ext/status twice. */ 0, 0x10, 1, 0x0a, /* enable rcv and xmit interrupts. */ 9, 0x0e, /* enable master interrupt bit d3. */ }; extern int matchbyname(); static void serinit(int running_interrupts) { static int initted=0; int bcount; int i, s, spd; /* * Will be called twice if we're running a serial console. */ if (initted++) return; sccA = IOBase + sccA; spd = SERBRD(serdefaultrate); s = splhigh(); SER_DOCNTL(0, 9, 0xc0); /* * initialize ports, substituting proper speed. */ bcount = sizeof(ser_init_bytes); for(i = 0; i < bcount; i += 2){ if (ser_init_bytes[i] == 12) /* baud rate low byte */ ser_init_bytes[i+1] = (spd & 0xff); if (ser_init_bytes[i] == 13) /* baud rate high byte */ ser_init_bytes[i+1] = ((spd>>8) & 0xff); if (!running_interrupts) { if ( ser_init_bytes[i] == 0x01 && ser_init_bytes[i+1] == 0x0a) break; } SER_DOCNTL(0, ser_init_bytes[i], ser_init_bytes[i + 1]); SER_DOCNTL(1, ser_init_bytes[i], ser_init_bytes[i + 1]); } splx(s); } static void serattach(parent, dev, aux) struct device *parent, *dev; void *aux; { if (mac68k_machine.serial_boot_echo) { printf(" (serial boot echo is on)\n"); } printf("\n"); serinit(1); } struct cfdriver sercd = { NULL, "ser", matchbyname, serattach, DV_TTY, sizeof(struct device), NULL, 0 }; /* ARGSUSED */ extern int seropen(dev_t dev, int flag, int mode, struct proc *p) { register struct tty *tp; register int unit; int error = 0; #if defined(DEBUG) printf("ser: entered seropen(%d, %d, %d, xx)\n", dev, flag, mode); #endif unit = UNIT(dev); if (unit >= NSER ){ return (ENXIO); } ser_active |= 1 << unit; if (ser_tty[unit]) { tp = ser_tty[unit]; } else { tp = ser_tty[unit] = ttymalloc(); } tp->t_oproc = serstart; tp->t_param = serparam; tp->t_dev = dev; if ((tp->t_state & TS_ISOPEN) == 0) { tp->t_state |= TS_WOPEN; ttychars(tp); if (tp->t_ispeed == 0) { tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_cflag = TTYDEF_CFLAG; tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = serdefaultrate; } serparam(tp, &tp->t_termios); ttsetwater(tp); } else if (tp->t_state&TS_XCLUDE && p->p_ucred->cr_uid != 0){ printf("ser%d: device is busy.\n", unit); return (EBUSY); } /* serial device open code */ bzero((char *)&ser_status[unit], sizeof(struct ser_status)); /* turn on RTS & DTR */ serctl(unit, SER_W5_RTS | SER_W5_DTR, DMSET); if(serctl(unit, 0, DMGET) & SER_R0_DCD) tp->t_state |= TS_CARR_ON; /* enable interrupts */ serctl(unit, 1, SCC_INT); /* end serial device open code */ (void) spltty(); while ((flag&O_NONBLOCK) == 0 && (tp->t_cflag&CLOCAL) == 0 && (tp->t_state & TS_CARR_ON) == 0) { tp->t_state |= TS_WOPEN; if (error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, ttopen, 0)) break; } (void) spl0(); if (error == 0) error = (*linesw[tp->t_line].l_open)(dev, tp); #if defined(DEBUG) printf("ser: exiting seropen()\n"); #endif return (error); } /*ARGSUSED*/ extern int serclose(dev_t dev, int flag, int mode, struct proc *p) { register struct tty *tp; register int unit; int s; #if defined(DEBUG) printf("ser: entered serclose()\n"); #endif unit = UNIT(dev); tp = ser_tty[unit]; (*linesw[tp->t_line].l_close)(tp, flag); /* serial device close code */ /* disable interrupts */ serctl(unit, 0, SCC_INT); if (tp->t_cflag&HUPCL || tp->t_state&TS_WOPEN || (tp->t_state&TS_ISOPEN) == 0) serctl(unit, 0, DMSET); /* turn RTS and DTR off */ ser_active &= ~(1 << unit); /* end of serial device close code */ ttyclose(tp); #ifdef broken ttyfree(tp); ser_tty[unit] = NULL; #endif #if defined(DEBUG) printf("ser: exiting serclose()\n"); #endif return (0); } extern int serread(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { register struct tty *tp = ser_tty[UNIT(dev)]; #if defined(DEBUG) printf("ser: called serread()\n"); #endif return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); } extern int serwrite(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { int unit = UNIT(dev); register struct tty *tp = ser_tty[unit]; #if defined(DEBUG) printf("ser: called serwrite()\n"); #endif return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); } /* private buffers used by driver at splscc() */ #define INBUFLEN 128 #define OUTBUFLEN 512 static unsigned char ser_inbuf[NSER][INBUFLEN]; static volatile unsigned char ser_inlen[NSER] = {0,0}; static unsigned char ser_intail[NSER] = {0,0}; static unsigned char ser_outbuf[NSER][OUTBUFLEN]; static volatile unsigned int ser_outlen[NSER] = {0,0}; static volatile unsigned int ser_outtail[NSER] = {0,0}; /* NOTE: This function is called by locore.s on a level 4 interrupt. since "splscc()" is level 4, and this is currently higher than anything except splhigh(), you can't call anything from this routine or you'll break the syncronization. basically we just do i/o from our local buffers and signal the upper layer with a software interrupt. */ extern int ser_intr(void) { /* serial interrupt code */ unsigned char reg0, reg1, ch, ch1, c, bits; int s; register int unit; /* read status to reset SCC state machine */ reg0 = SCCCNTL(0); /* reset port B vector to see who interrupted us */ bits = SER_STATUS(1, 2) & 0x0e; if (bits < 8) unit = 1; else unit = 0; reg0 = SER_STATUS(unit, 0); switch ((bits & 7) >> 1) { case 0: /* tranmitter buffer empty */ if (ser_outlen[unit] > 0) { c = ser_outbuf[unit][ser_outtail[unit]]; ser_outtail[unit] = (ser_outtail[unit] + 1) % OUTBUFLEN; SCCRDWR(unit) = c; ser_outlen[unit]--; } else { SER_DOCNTL(unit, 0, SER_W0_RSTTXPND); ser_status[unit].flags &= ~SER_BUSY; setsoftserial(); } SER_DOCNTL(unit, 0, SER_W0_RSTIUS); break; case 1: /* ext/status change */ if ((reg0 & SER_R0_DCD) && ser_status[unit].dcd == 0) ser_status[unit].ddcd = 1; else if (!(reg0 & SER_R0_DCD) && ser_status[unit].dcd != 0) ser_status[unit].ddcd = 1; ser_status[unit].dcd = reg0 & SER_R0_DCD; if ((reg0 & SER_R0_CTS) && ser_status[unit].cts == 0) ser_status[unit].dcts = 1; else if (!(reg0 & SER_R0_CTS) && ser_status[unit].cts != 0) ser_status[unit].dcts = 1; ser_status[unit].cts = reg0 & SER_R0_CTS; if (reg0 & SER_R0_TXUNDERRUN) SER_DOCNTL(unit, 0, SER_W0_RSTTXUNDERRUN); SER_DOCNTL(unit, 0, SER_W0_RSTESINTS); SER_DOCNTL(unit, 0, SER_W0_RSTIUS); break; case 2: /* recv char available */ ch = SCCRDWR(unit); c = 1; if (SER_STATUS(unit, 0) & SER_R0_RXREADY) { ch1 = SCCRDWR(unit); c = 2; } if (ser_inlen[unit] < INBUFLEN) ser_inbuf[unit][(ser_intail[unit] + (ser_inlen[unit]++)) % INBUFLEN] = ch; else ser_status[unit].oflo++; if (c > 1) { if (ser_inlen[unit] < INBUFLEN) ser_inbuf[unit][(ser_intail[unit] + (ser_inlen[unit]++)) % INBUFLEN] = ch1; else ser_status[unit].oflo++; } setsoftserial(); SER_DOCNTL(unit, 0, SER_W0_RSTIUS); break; case 3: /* spec recv condition */ reg1 = SER_STATUS(unit, 1); SCCRDWR(unit); /* flush fifo */ if (reg1 & SER_R1_RXOVERRUN) ser_status[unit].over++; SER_DOCNTL(unit, 0, SER_W0_RSTERR); SER_DOCNTL(unit, 0, SER_W0_RSTIUS); break; } return(1); /* end of serial interrupt code */ } /* serial software interrupt. do all the things we could not do at splscc(); */ extern void sersir(void) { int unit, s, c; register struct tty *tp; for (unit = 0; unit < 2; unit++) { if ((tp = ser_tty[unit]) == 0) continue; /* check for overflows */ if (ser_status[unit].oflo || ser_status[unit].over) { s = splhigh(); ser_status[unit].oflo = 0; ser_status[unit].over = 0; splx(s); if (tp->t_state & TS_ISOPEN) (*linesw[tp->t_line].l_rint)('#', tp); } /* check for change in DCD */ if (ser_status[unit].ddcd) { s = splhigh(); ser_status[unit].ddcd = 0; splx(s); if (0) { if (ser_status[unit].dcd) tp->t_state |= TS_CARR_ON; else tp->t_state &= ~TS_CARR_ON; (*linesw[tp->t_line].l_modem)(tp, ser_status[unit].dcd ? 1 : 0); } } /* check for change in CTS */ if (ser_status[unit].dcts) { s = splhigh(); ser_status[unit].dcts = 0; splx(s); if ((tp->t_state & TS_ISOPEN) && (tp->t_flags & CRTSCTS)) { tp->t_state &= ~TS_TTSTOP; serstart(tp); } else tp->t_state |= TS_TTSTOP; } /* drain input fifo */ while (ser_inlen[unit] > 0) { if (tp->t_rawq.c_cc + tp->t_canq.c_cc >= TTYHOG) { setsoftserial(); break; } s = splhigh(); c = ser_inbuf[unit][ser_intail[unit]]; ser_intail[unit] = (ser_intail[unit] + 1) % INBUFLEN; ser_inlen[unit]--; splx(s); if (tp->t_state & TS_ISOPEN) (*linesw[tp->t_line].l_rint)(c, tp); } /* fill output fifo */ if (ser_outlen[unit] == 0) { if (tp->t_line) (*linesw[tp->t_line].l_start)(tp); else serstart(tp); } } } extern int serioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p) { register struct tty *tp; register int unit = UNIT(dev); register int error; #if defined(DEBUG) printf("ser: entering ioctl()\n"); #endif tp = ser_tty[unit]; error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return (error); switch (cmd) { #if 0 case TIOCSBRK: /* turn break on */ dca->dca_cfcr |= CFCR_SBREAK; break; case TIOCCBRK: /* turn break off */ dca->dca_cfcr &= ~CFCR_SBREAK; break; #endif case TIOCSDTR: /* set DTR */ (void) serctl(dev, SER_W5_DTR | SER_W5_RTS, DMBIS); break; case TIOCCDTR: /* clear DTR */ (void) serctl(dev, SER_W5_DTR | SER_W5_RTS, DMBIC); break; case TIOCMSET: /* set modem control bits */ (void) serctl(dev, *(int *)data, DMSET); break; case TIOCMBIS: /* OR bits on */ (void) serctl(dev, *(int *)data, DMBIS); break; case TIOCMBIC: /* AND bits off */ (void) serctl(dev, *(int *)data, DMBIC); break; case TIOCMGET: /* get modem bits */ *(int *)data = serctl(dev, 0, DMGET); break; case TIOCGFLAGS: { int bits = 0; *(int *)data = bits; break; } case TIOCSFLAGS: { int userbits, driverbits = 0; error = suser(p->p_ucred, &p->p_acflag); if (error != 0) return (EPERM); userbits = *(int *)data; break; } default: #if defined(DEBUG) printf("ser%d: unknown ioctl(,0x%x,)\n", UNIT(dev), cmd); #endif return (ENOTTY); } #if defined(DEBUG) printf("ser: exiting ioctl()\n"); #endif return (0); } static int ser_calc_regs(int unit, int cflag, unsigned char *preg3, unsigned char *preg4, unsigned char *preg5) { unsigned char r3, r4, r5; r3 = SER_W3_ENBRX; r5 = SER_W5_ENBTX; if (ser_status[unit].dtr) r5 |= SER_W5_DTR; if (ser_status[unit].rts) r5 |= SER_W5_RTS; switch (cflag&CSIZE) { case CS5: r3 |= SER_W3_RX5DBITS; r5 |= SER_W5_TX5DBITS; break; case CS6: r3 |= SER_W3_RX6DBITS; r5 |= SER_W5_TX6DBITS; break; case CS7: r3 |= SER_W3_RX7DBITS; r5 |= SER_W5_TX7DBITS; break; case CS8: r3 |= SER_W3_RX8DBITS; r5 |= SER_W5_TX8DBITS; break; } r4 = 0; if(cflag & PARENB) r4 |= (cflag & PARODD) ? SER_W4_PARODD : SER_W4_PAREVEN; if(cflag & CSTOPB) r4 |= SER_W4_2SBIT; else r4 |= SER_W4_1SBIT; *preg3 = r3; *preg4 = r4; *preg5 = r5; } static int serparam(register struct tty *tp, register struct termios *t) { register int cflag = t->c_cflag; unsigned char reg3, reg4, reg5; int unit = UNIT(tp->t_dev); int ospeed = t->c_ospeed; int s; #if defined(DEBUG) printf("ser: entering serparam()\n"); #endif /* check requested parameters */ if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)){ printf("ser: serparam() returning EINVAL\n"); return (EINVAL); } /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; tp->t_cflag = cflag; /* Start of serial specific param code */ if(ospeed == 0) { serctl(unit, 0, DMSET); /* hang up line */ return(0); } serctl(unit, ospeed, SCC_SPEED); /* ser_calc_regs(unit, cflag, ®3, ®4, ®5); s = splhigh(); SER_DOCNTL(unit, 3, reg3); SER_DOCNTL(unit, 4, reg4); SER_DOCNTL(unit, 5, reg5); splx(s); */ serctl(unit, 1, SCC_INT); serctl(unit, SER_W5_DTR | SER_W5_RTS, DMSET); /* End of serial specific param code */ #if defined(DEBUG) printf("ser: exiting serparam()\n"); #endif return (0); } extern void serstart(register struct tty *tp) { int s, s1; int i, space, unit, c, need_start, first_char; unit = UNIT(tp->t_dev); s = spltty(); if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP)) { goto out; } if (tp->t_outq.c_cc <= tp->t_lowat) { if (tp->t_state&TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t)&tp->t_outq); } selwakeup(&(tp->t_wsel)); } if (tp->t_outq.c_cc == 0 || (tp->t_state & TS_BUSY) || (ser_status[unit].flags & SER_BUSY)) goto out; tp->t_state |= TS_BUSY; if(ser_outlen[unit] == 0){ first_char = (char)getc(&tp->t_outq); need_start = 1; } else need_start = 0; /* put characters into a buffer that ser_intr() will empty */ /* out on transmit-ready interrupts. */ /* get free space in s/w fifo - this will only get better */ s1 = splhigh(); space = OUTBUFLEN - ser_outlen[unit]; splx(s1); while(tp->t_outq.c_cc && space > 0) { /* note that getc goes spltty() */ c = getc(&tp->t_outq); /* protect s/w fifo at splhigh() */ s1 = splhigh(); ser_outbuf[unit][(ser_outtail[unit] + (ser_outlen[unit]++)) % OUTBUFLEN] = (char)c; splx(s1); space--; } tp->t_state &= ~TS_BUSY; if (need_start) { s1 = splhigh(); ser_status[unit].flags |= SER_BUSY; SCCRDWR(unit) = first_char; /* to start chain */ splx(s1); } out: splx(s); } /* * Stop output on a line. */ /*ARGSUSED*/ extern int serstop(register struct tty *tp, int flag) { register int s; #if defined(DEBUG) printf("ser: entering serstop()\n"); #endif s = spltty(); if (tp->t_state & TS_BUSY) { if ((tp->t_state&TS_TTSTOP)==0) tp->t_state |= TS_FLUSH; } #if defined(DEBUG) printf("ser: exiting serstop()\n"); #endif splx(s); } static int serctl(dev_t dev, int bits, int how) { int unit, s; unit = UNIT(dev); /* run at splhigh so we don't get interrupted by i/o */ s = splhigh(); switch (how) { case DMSET: ser_status[unit].dtr = bits & SER_W5_DTR; ser_status[unit].rts = bits & SER_W5_RTS; SER_DOCNTL(unit, 5, bits | 0x68); break; case DMBIS: break; case DMBIC: break; case DMGET: bits = SER_STATUS(unit, 0); break; /* */ case SCC_INT: if (bits) { SER_DOCNTL(unit, 0, SER_W0_RSTERR); SER_DOCNTL(unit, 0, SER_W0_RSTIUS); SER_DOCNTL(unit, 1, SER_W1_ENBEXTINT | SER_W1_ENBRXINT | SER_W1_ENBTXINT); } else SER_DOCNTL(unit, 1, 0); break; case SCC_SPEED: SER_DOCNTL(unit, 12, SERBRD(bits) & 0xff); SER_DOCNTL(unit, 13, (SERBRD(bits) >> 8) & 0xff); break; } (void) splx(s); return(bits); } /* * Console functions. */ dev_t mac68k_serdev; sercnprobe(struct consdev *cp) { int maj, unit; for (maj = 0 ; maj < nchrdev ; maj++) { if (cdevsw[maj].d_open == seropen) { break; } } if (maj == nchrdev) goto nosercon; cp->cn_pri = CN_NORMAL; /* Lower than CN_INTERNAL */ if (mac68k_machine.serial_console & 0x01) cp->cn_pri = CN_REMOTE; /* Higher than CN_INTERNAL */ unit = (mac68k_machine.serial_console & 0x02) ? 1 : 0; cp->cn_dev = makedev(maj, unit); mac68k_machine.serial_boot_echo = 0; return 0; nosercon: if (mac68k_machine.serial_boot_echo) { /* major number doesn't really matter. */ mac68k_serdev = makedev(maj, 0); serinit(1); } return 0; } sercninit(struct consdev *cp) { serinit(1); } sercngetc(dev_t dev) { int unit, c; unit = UNIT(dev); while (!(SER_STATUS(unit, 0) & SER_R0_RXREADY)); c = SCCRDWR(unit); SER_STATUS(unit, 0) = SER_W0_RSTESINTS; return c; } sercnputc(dev_t dev, int c) { int unit; unit = UNIT(dev); while (!(SER_STATUS(unit, 0) & SER_R0_TXREADY)); SCCRDWR(unit) = c; }