/* $NetBSD: scifreg.h,v 1.2 1999/09/16 21:15:36 msaitoh Exp $ */ /*- * Copyright (C) 1999 SAITOH Masanobu. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SH3_SCIFREG_H_ #define _SH3_SCIFREG_H_ /* * Serial Communication Interface (SCIF) */ #if !defined(SH4) /* SH3 definitions */ #define SHREG_SCSMR2 (*(volatile unsigned char *) 0xa4000150) #define SHREG_SCBRR2 (*(volatile unsigned char *) 0xa4000152) #define SHREG_SCSCR2 (*(volatile unsigned char *) 0xa4000154) #define SHREG_SCFTDR2 (*(volatile unsigned char *) 0xa4000156) #define SHREG_SCSSR2 (*(volatile unsigned short *) 0xa4000158) #define SHREG_SCFRDR2 (*(volatile unsigned char *) 0xa400015A) #define SHREG_SCFCR2 (*(volatile unsigned char *) 0xa400015C) #define SHREG_SCFDR2 (*(volatile unsigned short *) 0xa400015E) #define SCSCR2_TIE 0x80 /* Transmit Interrupt Enable */ #define SCSCR2_RIE 0x40 /* Recieve Interrupt Enable */ #define SCSCR2_TE 0x20 /* Transmit Enable */ #define SCSCR2_RE 0x10 /* Receive Enable */ #define SCSCR2_CKE1 0x02 /* ClocK Enable 1 */ #define SCSCR2_CKE0 0x01 /* ClocK Enable 0 */ #define SCSSR2_ER 0x0080 /* ERror */ #define SCSSR2_TEND 0x0040 /* Transmit END */ #define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */ #define SCSSR2_BRK 0x0010 /* BReaK detection */ #define SCSSR2_FER 0x0008 /* Framing ERror */ #define SCSSR2_PER 0x0004 /* Parity ERror */ #define SCSSR2_RDF 0x0002 /* Recieve fifo Data Full */ #define SCSSR2_DR 0x0001 /* Data Ready */ #define SCFCR2_RTRG1 0x80 /* Receive TRiGger 1 */ #define SCFCR2_RTRG0 0x40 /* Receive TRiGger 0 */ #define SCFCR2_TTRG1 0x20 /* Transmit TRiGger 1 */ #define SCFCR2_TTRG0 0x10 /* Transmit TRiGger 0 */ #define SCFCR2_MCE 0x08 /* Modem Control Enable */ #define SCFCR2_TFRST 0x04 /* Transmit Fifo register ReSeT */ #define SCFCR2_RFRST 0x02 /* Receive Fifo register ReSeT */ #define SCFCR2_LOOP 0x01 /* LOOP back test */ #define FIFO_RCV_TRIGGER_1 0x00 #define FIFO_RCV_TRIGGER_4 0x40 #define FIFO_RCV_TRIGGER_8 0x80 #define FIFO_RCV_TRIGGER_14 0xc0 #define FIFO_XMT_TRIGGER_8 0x00 #define FIFO_XMT_TRIGGER_4 0x10 #define FIFO_XMT_TRIGGER_2 0x20 #define FIFO_XMT_TRIGGER_1 0x30 #else /* SH4 definitions */ #define SHREG_SCSMR2 (*(volatile unsigned short *) 0xffe80000) #define SHREG_SCBRR2 (*(volatile unsigned char *) 0xffe80004) #define SHREG_SCSCR2 (*(volatile unsigned short *) 0xffe80008) #define SHREG_SCFTDR2 (*(volatile unsigned char *) 0xffe8000c) #define SHREG_SCFSR2 (*(volatile unsigned short *) 0xffe80010) #define SHREG_SCFRDR2 (*(volatile unsigned char *) 0xffe80014) #define SHREG_SCFCR2 (*(volatile unsigned short *) 0xffe80018) #define SHREG_SCFDR2 (*(volatile unsigned short *) 0xffe8001c) #define SHREG_SCSPTR2 (*(volatile unsigned short *) 0xffe80020) #define SHREG_SCLSR2 (*(volatile unsigned short *) 0xffe80024) /* alias */ #define SHREG_SCSFDR2 SHREG_SCFTDR2 #define SHREG_SCSSR2 SHREG_SCFSR2 #define SCSCR2_TIE 0x0080 /* Transmit Interrupt Enable */ #define SCSCR2_RIE 0x0040 /* Recieve Interrupt Enable */ #define SCSCR2_TE 0x0020 /* Transmit Enable */ #define SCSCR2_RE 0x0010 /* Receive Enable */ #define SCSCR2_CKE1 0x0002 /* ClocK Enable 1 */ #define SCSSR2_ER 0x0080 /* ERror */ #define SCSSR2_TEND 0x0040 /* Transmit END */ #define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */ #define SCSSR2_BRK 0x0010 /* BReaK detection */ #define SCSSR2_FER 0x0008 /* Framing ERror */ #define SCSSR2_PER 0x0004 /* Parity ERror */ #define SCSSR2_RDF 0x0002 /* Recieve fifo Data Full */ #define SCSSR2_DR 0x0001 /* Data Ready */ #define SCFCR2_RTRG1 0x0080 /* Receive TRiGger 1 */ #define SCFCR2_RTRG0 0x0040 /* Receive TRiGger 0 */ #define SCFCR2_TTRG1 0x0020 /* Transmit TRiGger 1 */ #define SCFCR2_TTRG0 0x0010 /* Transmit TRiGger 0 */ #define SCFCR2_MCE 0x0008 /* Modem Control Enable */ #define SCFCR2_TFRST 0x0004 /* Transmit Fifo register ReSeT */ #define SCFCR2_RFRST 0x0002 /* Receive Fifo register ReSeT */ #define SCFCR2_LOOP 0x0001 /* LOOP back test */ #define FIFO_RCV_TRIGGER_1 0x0000 #define FIFO_RCV_TRIGGER_4 0x0040 #define FIFO_RCV_TRIGGER_8 0x0080 #define FIFO_RCV_TRIGGER_14 0x00c0 #define FIFO_XMT_TRIGGER_8 0x0000 #define FIFO_XMT_TRIGGER_4 0x0010 #define FIFO_XMT_TRIGGER_2 0x0020 #define FIFO_XMT_TRIGGER_1 0x0030 #endif /* common definitions */ #define SCFDR2_TXCNT 0xff00 /* Tx CouNT */ #define SCFDR2_RECVCNT 0x00ff /* Rx CouNT */ #define SCFDR2_TXF_FULL 0x1000 /* Tx FULL */ #define SCFDR2_RXF_EPTY 0x0000 /* Rx EMPTY */ #endif /* !_SH3_SCIFREG_ */