/* $NetBSD: ncr5380reg.h,v 1.2 1995/09/12 21:05:58 briggs Exp $ */ /* * Copyright (c) 1995 Leo Weppelman. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Leo Weppelman. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _NCR5380REG_H #define _NCR5380REG_H /* * NCR5380 common interface definitions. */ /* * Register numbers: (first argument to GET/SET_5380_REG ) */ #define NCR5380_DATA 0 /* Data register */ #define NCR5380_ICOM 1 /* Initiator command register */ #define NCR5380_MODE 2 /* Mode register */ #define NCR5380_TCOM 3 /* Target command register */ #define NCR5380_IDSTAT 4 /* Bus status register */ #define NCR5380_DMSTAT 5 /* DMA status register */ #define NCR5380_TRCV 6 /* Target receive register */ #define NCR5380_IRCV 7 /* Initiator receive register */ /* * Definitions for Initiator command register. */ #define SC_A_RST 0x80 /* RW - Assert RST */ #define SC_TEST 0x40 /* W - Test mode */ #define SC_AIP 0x40 /* R - Arbitration in progress */ #define SC_LA 0x20 /* R - Lost arbitration */ #define SC_A_ACK 0x10 /* RW - Assert ACK */ #define SC_A_BSY 0x08 /* RW - Assert BSY */ #define SC_A_SEL 0x04 /* RW - Assert SEL */ #define SC_A_ATN 0x02 /* RW - Assert ATN */ #define SC_ADTB 0x01 /* RW - Assert Data To Bus */ /* * Definitions for mode register */ #define SC_B_DMA 0x80 /* RW - Block mode DMA (not on TT!) */ #define SC_T_MODE 0x40 /* RW - Target mode */ #define SC_E_PAR 0x20 /* RW - Enable parity check */ #define SC_E_PARI 0x10 /* RW - Enable parity interrupt */ #define SC_E_EOPI 0x08 /* RW - Enable End Of Process Interrupt */ #define SC_MON_BSY 0x04 /* RW - Monitor BSY */ #define SC_M_DMA 0x02 /* RW - Set DMA mode */ #define SC_ARBIT 0x01 /* RW - Arbitrate */ /* * Definitions for tcom register */ #define SC_LBS 0x80 /* RW - Last Byte Send (not on TT!) */ #define SC_A_REQ 0x08 /* RW - Assert REQ */ #define SC_A_MSG 0x04 /* RW - Assert MSG */ #define SC_A_CD 0x02 /* RW - Assert C/D */ #define SC_A_IO 0x01 /* RW - Assert I/O */ /* * Definitions for idstat register */ #define SC_S_RST 0x80 /* R - RST is set */ #define SC_S_BSY 0x40 /* R - BSY is set */ #define SC_S_REQ 0x20 /* R - REQ is set */ #define SC_S_MSG 0x10 /* R - MSG is set */ #define SC_S_CD 0x08 /* R - C/D is set */ #define SC_S_IO 0x04 /* R - I/O is set */ #define SC_S_SEL 0x02 /* R - SEL is set */ #define SC_S_PAR 0x01 /* R - Parity bit */ /* * Definitions for dmastat register */ #define SC_END_DMA 0x80 /* R - End of DMA */ #define SC_DMA_REQ 0x40 /* R - DMA request */ #define SC_PAR_ERR 0x20 /* R - Parity error */ #define SC_IRQ_SET 0x10 /* R - IRQ is active */ #define SC_PHS_MTCH 0x08 /* R - Phase Match */ #define SC_BSY_ERR 0x04 /* R - Busy error */ #define SC_ATN_STAT 0x02 /* R - State of ATN line */ #define SC_ACK_STAT 0x01 /* R - State of ACK line */ #define SC_S_SEND 0x00 /* W - Start DMA output */ #define SC_CLINT { /* Clear interrupts */ \ int i = GET_5380_REG(NCR5380_IRCV); \ } /* * Definition of SCSI-bus phases. The values are determined by signals * on the SCSI-bus. DO NOT CHANGE! * The values must be used to index the pointers in SCSI-PARMS. */ #define NR_PHASE 8 #define PH_DATAOUT 0 #define PH_DATAIN 1 #define PH_CMD 2 #define PH_STATUS 3 #define PH_RES1 4 #define PH_RES2 5 #define PH_MSGOUT 6 #define PH_MSGIN 7 #define PH_OUT(phase) (!(phase & 1)) /* TRUE if output phase */ #define PH_IN(phase) (phase & 1) /* TRUE if input phase */ /* * Id of Host-adapter */ #define SC_HOST_ID 0x80 /* * Base setting for 5380 mode register */ #define IMODE_BASE SC_E_PAR /* * SCSI completion status codes, should move to sys/scsi/???? */ #define SCSMASK 0x1e /* status code mask */ #define SCSGOOD 0x00 /* good status */ #define SCSCHKC 0x02 /* check condition */ #define SCSBUSY 0x08 /* busy status */ #define SCSCMET 0x04 /* condition met / good */ /* * Return values of check_intr() */ #define INTR_SPURIOUS 0 #define INTR_RESEL 2 #define INTR_DMA 3 struct ncr_softc { struct device sc_dev; struct scsi_link sc_link; }; /* * Max. number of dma-chains per request */ #define MAXDMAIO (MAXPHYS/NBPG + 1) /* * Some requests are not contiguous in physical memory. We need to break them * up into contiguous parts for DMA. */ struct dma_chain { u_int dm_count; u_long dm_addr; }; /* * Define our issue, free and disconnect queue's. */ typedef struct req_q { struct req_q *next; /* next in free, issue or discon queue */ struct req_q *link; /* next linked command to execute */ struct scsi_xfer *xs; /* request from high-level driver */ u_short dr_flag; /* driver state */ u_char phase; /* current SCSI phase */ u_char msgout; /* message to send when requested */ u_char targ_id; /* target for command */ u_char targ_lun; /* lun for command */ u_char status; /* returned status byte */ u_char message; /* returned message byte */ u_char *bounceb; /* allocated bounce buffer */ u_char *bouncerp; /* bounce read-pointer */ struct dma_chain dm_chain[MAXDMAIO]; struct dma_chain *dm_cur; /* current dma-request */ struct dma_chain *dm_last; /* last dma-request */ long xdata_len; /* length of transfer */ u_char *xdata_ptr; /* virtual address of transfer */ struct scsi_generic xcmd; /* command to execute */ } SC_REQ; /* * Values for dr_flag: */ #define DRIVER_IN_DMA 0x01 /* Non-polled DMA activated */ #define DRIVER_AUTOSEN 0x02 /* Doing automatic sense */ #define DRIVER_NOINT 0x04 /* We are booting: no interrupts */ #define DRIVER_DMAOK 0x08 /* DMA can be used on this request */ #define DRIVER_BOUNCING 0x10 /* Using the bounce buffer */ /* XXX: Should go to ncr5380var.h */ static SC_REQ *issue_q = NULL; /* Commands waiting to be issued*/ static SC_REQ *discon_q = NULL; /* Commands disconnected */ static SC_REQ *connected = NULL; /* Command currently connected */ /* * Function decls: */ static int transfer_pio __P((u_char *, u_char *, u_long *, int)); static int wait_req_true __P((void)); static int wait_req_false __P((void)); static int scsi_select __P((SC_REQ *, int)); static int handle_message __P((SC_REQ *, u_int)); static void ack_message __P((void)); static void nack_message __P((SC_REQ *)); static int information_transfer __P((void)); static void reselect __P((struct ncr_softc *)); static int dma_ready __P((void)); static void transfer_dma __P((SC_REQ *, u_int, int)); static int check_autosense __P((SC_REQ *, int)); static int reach_msg_out __P((struct ncr_softc *, u_long)); static int check_intr __P((struct ncr_softc *)); static void scsi_reset __P((struct ncr_softc *)); static int scsi_dmaok __P((SC_REQ *)); static void run_main __P((struct ncr_softc *)); static void scsi_main __P((struct ncr_softc *)); static void ncr_ctrl_intr __P((struct ncr_softc *)); static void ncr_dma_intr __P((struct ncr_softc *)); static void ncr_tprint __P((SC_REQ *, char *, ...)); static void ncr_aprint __P((struct ncr_softc *, char *, ...)); static void show_request __P((SC_REQ *, char *)); static void show_phase __P((SC_REQ *, int)); static void show_signals __P((u_char, u_char)); #endif /* _NCR5380REG_H */