NetBSD/hp300 1.0 will run on most HP 9000/300 series machines.
The lowest amount of RAM that has been tested is 7.5M, though it
may run with less.  Certainly, if you wish to run X, more RAM is
recommended.  Until you reach 16M, more RAM is more important than
a faster CPU.

Here is a table of recommended HD partition sizes for a full install:
	partition:	advise	needed
	root (/)	15M	15M	(see note below)
	user (/usr)	80M	45M
	swap		----- 2M for every 1M of RAM -----
	local (/local)	up to you

NOTE:  Because of the nature of the hp300 bootstrap procedure, the root
filesystem is a _fixed_size_!  You may want to consider placing /var and
/tmp on their own partitions.  This, of course is up to you and your
judgement.  Also, note that the recommended size of /usr is 15M greater
than the needed size.  This is to allow room for kernel source and
compile areas, as you may want to compile your own kernel.

The following HP hardware is supported:

	CPUs:
		68020-based: 318, 319, 320, 330, and 350.
		68030-based: 340, 345, 360, 370, 375, and 400.
		68040-based: 380, 425, and 433.

	Disks:
		HP-IB/CS80: 7912, 7914, 7933, 7936, 7937, 7945, 7957,
			    7958, 7959, 2200, and 2203.
		SCSI-I, including magneto-optical and CD-ROM.  SCSI-II
		drives should work if they can talk SCSI-I.

	Tape drives:
		Low-density CS80 cartridge: 7914, 7946, 9144.
		High-density CS80 cartridge: 9145.
		SCSI: HP DAT and Exabyte.

	RS232 interfaces:
		98644 built-in single port (dca).
		98642 4-port (dcm).
		98638 8-port (dcm).

	Network interfaces:
		98643 built-in and add-on LAN cards.

	Displays:
		98544, 98545, and 98547 color and monochrome Topcat.
		98548, 98549, and 98550 color and monochrome Catseye.
		98700 and 98710 Gatorbox.
		98720 and 98721 Renaissance.
		98730 and 98731 DaVinci.
		A1096A monochrome Hyperion.

	Input devices:
		General interface supporting all HIL devices: keyboard,
		2 and 3 button mice, and ID module.

	Miscellaneous:
		Battery-backed real-time clock.
		98625A and 98625B built-in HP-IB interface.
		98658A built-in SCSI interface.
		Printers and plotters on RS232 and HP-IB.
		SCSI autochanger.

If it's not on this list, there is no support for it in this release.