#	$NetBSD: files.omap2,v 1.31 2015/06/06 14:00:32 jmcneill Exp $
#
# Configuration info for Texas Instruments OMAP2/OMAP3 CPU support
# Based on xscale/files.pxa2x0
#

include "arch/arm/pic/files.pic"
include "arch/arm/cortex/files.cortex"

file	arch/arm/arm32/irq_dispatch.S
file	arch/arm/omap/omap_dma.c

# Memory size in megabytes
defparam opt_omap.h				MEMSIZE
defparam opt_omap.h				OMAP_EMIFF_PBASE OMAP_EMIFF_SIZE
defflag opt_omap.h				OMAP2
defflag opt_omap.h				OMAP3: OMAP2
defflag opt_omap.h				OMAP4: OMAP3
defflag opt_omap.h				OMAP5: OMAP4
defflag opt_omap.h				OMAP_2XXX: OMAP2
defflag opt_omap.h				OMAP_2430: OMAP_2XXX
defflag opt_omap.h				OMAP_2420: OMAP_2XXX
defflag opt_omap.h				OMAP_3XXX: OMAP3
defflag opt_omap.h				OMAP_3430: OMAP_3XXX
defflag opt_omap.h				OMAP_3530: OMAP_3XXX
defflag opt_omap.h				OMAP_4XXX: OMAP4
defflag opt_omap.h				OMAP_4430: OMAP_4XXX
defflag opt_omap.h				OMAP_4460: OMAP_4XXX
defflag opt_omap.h				OMAP_5XXX: OMAP5
defflag opt_omap.h				OMAP_5430: OMAP_5XXX
defflag opt_omap.h				TI_AM335X: OMAP3
defflag opt_omap.h				TI_DM37XX: OMAP3

# OBIO just an attach point
device	obio { [addr=-1], [size=0], [intr=-1], [mult=1], [intrbase=-1], [nobyteacc=0], [edmabase=-1]
	     } : bus_space_generic
attach	obio at mainbus
file	arch/arm/omap/omap2_obio.c		obio needs-count

# OBIO files
file	arch/arm/omap/omap_space.c		obio
file	arch/arm/omap/omap_a2x_space.c		obio
file	arch/arm/arm/bus_space_a2x.S		obio
file	arch/arm/omap/omap_a4x_space.c		obio
file	arch/arm/arm/bus_space_a4x.S		obio

# TI Sitara control module
device	sitaracm
attach	sitaracm at obio with sitaracm
file	arch/arm/omap/sitara_cm.c		sitaracm
file	arch/arm/omap/am335x_cm_padconf.c	ti_am335x

# OMAP2 interrupt controller
device	omapicu: pic, pic_splfuncs
attach	omapicu at obio with omap2icu
file	arch/arm/omap/omap2_icu.c		(omap2 | omap3) & omapicu
file	arch/arm/omap/omap2430_intr.c		omap2 & !omapicu & !omap4

# OMAP2 GPIO controllers
device	omapgpio: gpiobus
attach	omapgpio at obio with omap2gpio
file	arch/arm/omap/omap2_gpio.c		(omap2 | omap3) & omapgpio

# TI_AM335X (and maybe TI OMAP4) I2C controllers
device	tiiic: i2cbus, i2cexec
attach	tiiic at obio with ti_iic
file	arch/arm/omap/ti_iic.c			ti_iic

# OMAP3 I2C controllers
device	omapiic: i2cbus, i2cexec
attach	omapiic at obio with omap3_i2c
file	arch/arm/omap/omap3_i2c.c		omap3_i2c

# OMAP3 system control module
device	omapscm: sysmon_envsys
attach	omapscm at obio with omap3_scm
file	arch/arm/omap/omap3_scm.c		omap3_scm

# OMAP dual-mode timer
device	omapdmtimer
file	arch/arm/omap/omap_dmtimer.c		omapdmtimer
defparam opt_omap.h				OMAP_SYSTEM_CLOCK_FREQ

attach	omapdmtimer at obio with omap_dmtimer_obio
file	arch/arm/omap/am335x_dmtimer.c		ti_am335x & omapdmtimer

# OMAP 2430 General Purpose Timer
device	omapmputmr
file	arch/arm/omap/omap2_mputmr.c		omapmputmr
defparam opt_omap.h				OMAP_GP_TIMER_CLOCK_FREQ

# OBIO/2430 GP Timer
attach 	omapmputmr at obio with obiomputmr
file	arch/arm/omap/obio_mputmr.c		obiomputmr

# Dual Mode (General Purpose) Timer
device 	omapgptmr
attach 	omapgptmr at obio
file	arch/arm/omap/omap2_gptmr.c		omapgptmr
#file	arch/arm/omap/omap_pwm.c		omapgptmr

# Watchdog timers

device	omapwdt32k: sysmon_wdog
file	arch/arm/omap/omap_wdt.c		omapwdt32k needs-flag

attach	omapwdt32k at obio with obiowdt32k
file	arch/arm/omap/obio_wdt.c		obiowdt32k

# L3 Interconnect
device	L3i { [addr=-1], [size=0], [intr=-1], [mult=1], [nobyteacc=0]
	      } : bus_space_generic
attach	L3i at mainbus
file	arch/arm/omap/omap2_l3i.c		omap2 | omap3

# General Purpose Memory Controller
# XXX some addl. chip select config parms may be desired here (e.g. timing)
# XXX so far we just use the setup established by boot firmware
device	gpmc { [addr=-1], [size=0], [intr=-1], [mult=1], [nobyteacc=0]
	      } : bus_space_generic
attach	gpmc at mainbus
file	arch/arm/omap/omap2_gpmc.c		gpmc

# SDMMC controller
attach	sdhc at obio with obiosdhc
file	arch/arm/omap/omap3_sdhc.c		obiosdhc

# NAND flash controller
device	omapnand: nandbus
attach	omapnand at gpmc
file	arch/arm/omap/omap2_nand.c		omapnand

# PRCM interface
device	prcm
attach	prcm at obio
file	arch/arm/omap/omap2_prcm.c		prcm needs-flag
file	arch/arm/omap/am335x_prcm.c		ti_am335x

# OHCI USB controller
attach	ohci at obio with obioohci
file	arch/arm/omap/obio_ohci.c		obioohci

attach	ehci at obio with omap3_ehci
file	arch/arm/omap/omap3_ehci.c		omap3_ehci

# TI OTG controller
define  tiotg_port {[port = -1], [mode = -1]}
device	tiotg: tiotg_port
attach	tiotg at obio
file	arch/arm/omap/tiotg.c			tiotg
attach  motg at tiotg_port

attach	ahcisata at obio with omap5_ahcisata
file	arch/arm/omap/omap5_ahcisata.c		omap5_ahcisata

device	omapfb: rasops16, rasops8, wsemuldisplaydev, vcons, edid
attach	omapfb at obio
file	arch/arm/omap/omapfb.c			omapfb

# TI AM335x framebuffer
device	tifb: rasops32, rasops24, rasops16, rasops8, wsemuldisplaydev, vcons, edid
attach	tifb at obio
file	arch/arm/omap/tifb.c			tifb

device	cpsw: ether, ifnet, arp, mii, mii_phy
attach	cpsw at obio
file	arch/arm/omap/if_cpsw.c			cpsw

device 	omapdma
attach 	omapdma at obio
file	arch/arm/omap/omap3_sdma.c		omapdma needs-flag

device	edma
attach	edma at obio
file	arch/arm/omap/omap_edma.c		edma needs-flag

device	trng
attach	trng at obio
file	arch/arm/omap/am335x_trng.c		trng

# these bus space methods are not bus-specific ...
#
file	arch/arm/omap/omap_nobyteacc_space.c	emifs | gpmc
file	arch/arm/omap/omap_nobyteacc_io.S	emifs | gpmc