/* $NetBSD: rtl81x9.c,v 1.96 2015/04/13 16:33:24 riastradh Exp $ */ /* * Copyright (c) 1997, 1998 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * FreeBSD Id: if_rl.c,v 1.17 1999/06/19 20:17:37 wpaul Exp */ /* * RealTek 8129/8139 PCI NIC driver * * Supports several extremely cheap PCI 10/100 adapters based on * the RealTek chipset. Datasheets can be obtained from * www.realtek.com.tw. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is * probably the worst PCI ethernet controller ever made, with the possible * exception of the FEAST chip made by SMC. The 8139 supports bus-master * DMA, but it has a terrible interface that nullifies any performance * gains that bus-master DMA usually offers. * * For transmission, the chip offers a series of four TX descriptor * registers. Each transmit frame must be in a contiguous buffer, aligned * on a longword (32-bit) boundary. This means we almost always have to * do mbuf copies in order to transmit a frame, except in the unlikely * case where a) the packet fits into a single mbuf, and b) the packet * is 32-bit aligned within the mbuf's data area. The presence of only * four descriptor registers means that we can never have more than four * packets queued for transmission at any one time. * * Reception is not much better. The driver has to allocate a single large * buffer area (up to 64K in size) into which the chip will DMA received * frames. Because we don't know where within this region received packets * will begin or end, we have no choice but to copy data from the buffer * area into mbufs in order to pass the packets up to the higher protocol * levels. * * It's impossible given this rotten design to really achieve decent * performance at 100Mbps, unless you happen to have a 400MHz PII or * some equally overmuscled CPU to drive it. * * On the bright side, the 8139 does have a built-in PHY, although * rather than using an MDIO serial interface like most other NICs, the * PHY registers are directly accessible through the 8139's register * space. The 8139 supports autonegotiation, as well as a 64-bit multicast * filter. * * The 8129 chip is an older version of the 8139 that uses an external PHY * chip. The 8129 has a serial MDIO interface for accessing the MII where * the 8139 lets you directly access the on-board PHY registers. We need * to select which interface to use depending on the chip type. */ #include __KERNEL_RCSID(0, "$NetBSD: rtl81x9.c,v 1.96 2015/04/13 16:33:24 riastradh Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void rtk_reset(struct rtk_softc *); static void rtk_rxeof(struct rtk_softc *); static void rtk_txeof(struct rtk_softc *); static void rtk_start(struct ifnet *); static int rtk_ioctl(struct ifnet *, u_long, void *); static int rtk_init(struct ifnet *); static void rtk_stop(struct ifnet *, int); static void rtk_watchdog(struct ifnet *); static void rtk_eeprom_putbyte(struct rtk_softc *, int, int); static void rtk_mii_sync(struct rtk_softc *); static void rtk_mii_send(struct rtk_softc *, uint32_t, int); static int rtk_mii_readreg(struct rtk_softc *, struct rtk_mii_frame *); static int rtk_mii_writereg(struct rtk_softc *, struct rtk_mii_frame *); static int rtk_phy_readreg(device_t, int, int); static void rtk_phy_writereg(device_t, int, int, int); static void rtk_phy_statchg(struct ifnet *); static void rtk_tick(void *); static int rtk_enable(struct rtk_softc *); static void rtk_disable(struct rtk_softc *); static void rtk_list_tx_init(struct rtk_softc *); #define EE_SET(x) \ CSR_WRITE_1(sc, RTK_EECMD, \ CSR_READ_1(sc, RTK_EECMD) | (x)) #define EE_CLR(x) \ CSR_WRITE_1(sc, RTK_EECMD, \ CSR_READ_1(sc, RTK_EECMD) & ~(x)) #define EE_DELAY() DELAY(100) #define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN) /* * Send a read command and address to the EEPROM, check for ACK. */ static void rtk_eeprom_putbyte(struct rtk_softc *sc, int addr, int addr_len) { int d, i; d = (RTK_EECMD_READ << addr_len) | addr; /* * Feed in each bit and stobe the clock. */ for (i = RTK_EECMD_LEN + addr_len; i > 0; i--) { if (d & (1 << (i - 1))) { EE_SET(RTK_EE_DATAIN); } else { EE_CLR(RTK_EE_DATAIN); } EE_DELAY(); EE_SET(RTK_EE_CLK); EE_DELAY(); EE_CLR(RTK_EE_CLK); EE_DELAY(); } } /* * Read a word of data stored in the EEPROM at address 'addr.' */ uint16_t rtk_read_eeprom(struct rtk_softc *sc, int addr, int addr_len) { uint16_t word; int i; /* Enter EEPROM access mode. */ CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_PROGRAM); EE_DELAY(); EE_SET(RTK_EE_SEL); /* * Send address of word we want to read. */ rtk_eeprom_putbyte(sc, addr, addr_len); /* * Start reading bits from EEPROM. */ word = 0; for (i = 16; i > 0; i--) { EE_SET(RTK_EE_CLK); EE_DELAY(); if (CSR_READ_1(sc, RTK_EECMD) & RTK_EE_DATAOUT) word |= 1 << (i - 1); EE_CLR(RTK_EE_CLK); EE_DELAY(); } /* Turn off EEPROM access mode. */ CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_OFF); return word; } /* * MII access routines are provided for the 8129, which * doesn't have a built-in PHY. For the 8139, we fake things * up by diverting rtk_phy_readreg()/rtk_phy_writereg() to the * direct access PHY registers. */ #define MII_SET(x) \ CSR_WRITE_1(sc, RTK_MII, \ CSR_READ_1(sc, RTK_MII) | (x)) #define MII_CLR(x) \ CSR_WRITE_1(sc, RTK_MII, \ CSR_READ_1(sc, RTK_MII) & ~(x)) /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ static void rtk_mii_sync(struct rtk_softc *sc) { int i; MII_SET(RTK_MII_DIR|RTK_MII_DATAOUT); for (i = 0; i < 32; i++) { MII_SET(RTK_MII_CLK); DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); } } /* * Clock a series of bits through the MII. */ static void rtk_mii_send(struct rtk_softc *sc, uint32_t bits, int cnt) { int i; MII_CLR(RTK_MII_CLK); for (i = cnt; i > 0; i--) { if (bits & (1 << (i - 1))) { MII_SET(RTK_MII_DATAOUT); } else { MII_CLR(RTK_MII_DATAOUT); } DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); } } /* * Read an PHY register through the MII. */ static int rtk_mii_readreg(struct rtk_softc *sc, struct rtk_mii_frame *frame) { int i, ack, s; s = splnet(); /* * Set up frame for RX. */ frame->mii_stdelim = RTK_MII_STARTDELIM; frame->mii_opcode = RTK_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; CSR_WRITE_2(sc, RTK_MII, 0); /* * Turn on data xmit. */ MII_SET(RTK_MII_DIR); rtk_mii_sync(sc); /* * Send command/address info. */ rtk_mii_send(sc, frame->mii_stdelim, 2); rtk_mii_send(sc, frame->mii_opcode, 2); rtk_mii_send(sc, frame->mii_phyaddr, 5); rtk_mii_send(sc, frame->mii_regaddr, 5); /* Idle bit */ MII_CLR((RTK_MII_CLK|RTK_MII_DATAOUT)); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); /* Turn off xmit. */ MII_CLR(RTK_MII_DIR); /* Check for ack */ MII_CLR(RTK_MII_CLK); DELAY(1); ack = CSR_READ_2(sc, RTK_MII) & RTK_MII_DATAIN; MII_SET(RTK_MII_CLK); DELAY(1); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for (i = 0; i < 16; i++) { MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); } goto fail; } for (i = 16; i > 0; i--) { MII_CLR(RTK_MII_CLK); DELAY(1); if (!ack) { if (CSR_READ_2(sc, RTK_MII) & RTK_MII_DATAIN) frame->mii_data |= 1 << (i - 1); DELAY(1); } MII_SET(RTK_MII_CLK); DELAY(1); } fail: MII_CLR(RTK_MII_CLK); DELAY(1); MII_SET(RTK_MII_CLK); DELAY(1); splx(s); if (ack) return 1; return 0; } /* * Write to a PHY register through the MII. */ static int rtk_mii_writereg(struct rtk_softc *sc, struct rtk_mii_frame *frame) { int s; s = splnet(); /* * Set up frame for TX. */ frame->mii_stdelim = RTK_MII_STARTDELIM; frame->mii_opcode = RTK_MII_WRITEOP; frame->mii_turnaround = RTK_MII_TURNAROUND; /* * Turn on data output. */ MII_SET(RTK_MII_DIR); rtk_mii_sync(sc); rtk_mii_send(sc, frame->mii_stdelim, 2); rtk_mii_send(sc, frame->mii_opcode, 2); rtk_mii_send(sc, frame->mii_phyaddr, 5); rtk_mii_send(sc, frame->mii_regaddr, 5); rtk_mii_send(sc, frame->mii_turnaround, 2); rtk_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ MII_SET(RTK_MII_CLK); DELAY(1); MII_CLR(RTK_MII_CLK); DELAY(1); /* * Turn off xmit. */ MII_CLR(RTK_MII_DIR); splx(s); return 0; } static int rtk_phy_readreg(device_t self, int phy, int reg) { struct rtk_softc *sc = device_private(self); struct rtk_mii_frame frame; int rval; int rtk8139_reg; if ((sc->sc_quirk & RTKQ_8129) == 0) { if (phy != 7) return 0; switch (reg) { case MII_BMCR: rtk8139_reg = RTK_BMCR; break; case MII_BMSR: rtk8139_reg = RTK_BMSR; break; case MII_ANAR: rtk8139_reg = RTK_ANAR; break; case MII_ANER: rtk8139_reg = RTK_ANER; break; case MII_ANLPAR: rtk8139_reg = RTK_LPAR; break; default: #if 0 printf("%s: bad phy register\n", device_xname(self)); #endif return 0; } rval = CSR_READ_2(sc, rtk8139_reg); return rval; } memset(&frame, 0, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; rtk_mii_readreg(sc, &frame); return frame.mii_data; } static void rtk_phy_writereg(device_t self, int phy, int reg, int data) { struct rtk_softc *sc = device_private(self); struct rtk_mii_frame frame; int rtk8139_reg; if ((sc->sc_quirk & RTKQ_8129) == 0) { if (phy != 7) return; switch (reg) { case MII_BMCR: rtk8139_reg = RTK_BMCR; break; case MII_BMSR: rtk8139_reg = RTK_BMSR; break; case MII_ANAR: rtk8139_reg = RTK_ANAR; break; case MII_ANER: rtk8139_reg = RTK_ANER; break; case MII_ANLPAR: rtk8139_reg = RTK_LPAR; break; default: #if 0 printf("%s: bad phy register\n", device_xname(self)); #endif return; } CSR_WRITE_2(sc, rtk8139_reg, data); return; } memset(&frame, 0, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; rtk_mii_writereg(sc, &frame); } static void rtk_phy_statchg(struct ifnet *ifp) { /* Nothing to do. */ } #define rtk_calchash(addr) \ (ether_crc32_be((addr), ETHER_ADDR_LEN) >> 26) /* * Program the 64-bit multicast hash filter. */ void rtk_setmulti(struct rtk_softc *sc) { struct ifnet *ifp; uint32_t hashes[2] = { 0, 0 }; uint32_t rxfilt; struct ether_multi *enm; struct ether_multistep step; int h, mcnt; ifp = &sc->ethercom.ec_if; rxfilt = CSR_READ_4(sc, RTK_RXCFG); if (ifp->if_flags & IFF_PROMISC) { allmulti: ifp->if_flags |= IFF_ALLMULTI; rxfilt |= RTK_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RTK_RXCFG, rxfilt); CSR_WRITE_4(sc, RTK_MAR0, 0xFFFFFFFF); CSR_WRITE_4(sc, RTK_MAR4, 0xFFFFFFFF); return; } /* first, zot all the existing hash bits */ CSR_WRITE_4(sc, RTK_MAR0, 0); CSR_WRITE_4(sc, RTK_MAR4, 0); /* now program new ones */ ETHER_FIRST_MULTI(step, &sc->ethercom, enm); mcnt = 0; while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN) != 0) goto allmulti; h = rtk_calchash(enm->enm_addrlo); if (h < 32) hashes[0] |= (1 << h); else hashes[1] |= (1 << (h - 32)); mcnt++; ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; if (mcnt) rxfilt |= RTK_RXCFG_RX_MULTI; else rxfilt &= ~RTK_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RTK_RXCFG, rxfilt); /* * For some unfathomable reason, RealTek decided to reverse * the order of the multicast hash registers in the PCI Express * parts. This means we have to write the hash pattern in reverse * order for those devices. */ if ((sc->sc_quirk & RTKQ_PCIE) != 0) { CSR_WRITE_4(sc, RTK_MAR0, bswap32(hashes[1])); CSR_WRITE_4(sc, RTK_MAR4, bswap32(hashes[0])); } else { CSR_WRITE_4(sc, RTK_MAR0, hashes[0]); CSR_WRITE_4(sc, RTK_MAR4, hashes[1]); } } void rtk_reset(struct rtk_softc *sc) { int i; CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_RESET); for (i = 0; i < RTK_TIMEOUT; i++) { DELAY(10); if ((CSR_READ_1(sc, RTK_COMMAND) & RTK_CMD_RESET) == 0) break; } if (i == RTK_TIMEOUT) printf("%s: reset never completed!\n", device_xname(sc->sc_dev)); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ void rtk_attach(struct rtk_softc *sc) { device_t self = sc->sc_dev; struct ifnet *ifp; struct rtk_tx_desc *txd; uint16_t val; uint8_t eaddr[ETHER_ADDR_LEN]; int error; int i, addr_len; callout_init(&sc->rtk_tick_ch, 0); /* * Check EEPROM type 9346 or 9356. */ if (rtk_read_eeprom(sc, RTK_EE_ID, RTK_EEADDR_LEN1) == 0x8129) addr_len = RTK_EEADDR_LEN1; else addr_len = RTK_EEADDR_LEN0; /* * Get station address. */ val = rtk_read_eeprom(sc, RTK_EE_EADDR0, addr_len); eaddr[0] = val & 0xff; eaddr[1] = val >> 8; val = rtk_read_eeprom(sc, RTK_EE_EADDR1, addr_len); eaddr[2] = val & 0xff; eaddr[3] = val >> 8; val = rtk_read_eeprom(sc, RTK_EE_EADDR2, addr_len); eaddr[4] = val & 0xff; eaddr[5] = val >> 8; if ((error = bus_dmamem_alloc(sc->sc_dmat, RTK_RXBUFLEN + 16, PAGE_SIZE, 0, &sc->sc_dmaseg, 1, &sc->sc_dmanseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(self, "can't allocate recv buffer, error = %d\n", error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg, RTK_RXBUFLEN + 16, (void **)&sc->rtk_rx_buf, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { aprint_error_dev(self, "can't map recv buffer, error = %d\n", error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, RTK_RXBUFLEN + 16, 1, RTK_RXBUFLEN + 16, 0, BUS_DMA_NOWAIT, &sc->recv_dmamap)) != 0) { aprint_error_dev(self, "can't create recv buffer DMA map, error = %d\n", error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->recv_dmamap, sc->rtk_rx_buf, RTK_RXBUFLEN + 16, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(self, "can't load recv buffer DMA map, error = %d\n", error); goto fail_3; } for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &txd->txd_dmamap)) != 0) { aprint_error_dev(self, "can't create snd buffer DMA map, error = %d\n", error); goto fail_4; } txd->txd_txaddr = RTK_TXADDR0 + (i * 4); txd->txd_txstat = RTK_TXSTAT0 + (i * 4); } SIMPLEQ_INIT(&sc->rtk_tx_free); SIMPLEQ_INIT(&sc->rtk_tx_dirty); /* * From this point forward, the attachment cannot fail. A failure * before this releases all resources thar may have been * allocated. */ sc->sc_flags |= RTK_ATTACHED; /* Reset the adapter. */ rtk_reset(sc); aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(eaddr)); ifp = &sc->ethercom.ec_if; ifp->if_softc = sc; strcpy(ifp->if_xname, device_xname(self)); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = rtk_ioctl; ifp->if_start = rtk_start; ifp->if_watchdog = rtk_watchdog; ifp->if_init = rtk_init; ifp->if_stop = rtk_stop; IFQ_SET_READY(&ifp->if_snd); /* * Do ifmedia setup. */ sc->mii.mii_ifp = ifp; sc->mii.mii_readreg = rtk_phy_readreg; sc->mii.mii_writereg = rtk_phy_writereg; sc->mii.mii_statchg = rtk_phy_statchg; sc->ethercom.ec_mii = &sc->mii; ifmedia_init(&sc->mii.mii_media, IFM_IMASK, ether_mediachange, ether_mediastatus); mii_attach(self, &sc->mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); /* Choose a default media. */ if (LIST_FIRST(&sc->mii.mii_phys) == NULL) { ifmedia_add(&sc->mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->mii.mii_media, IFM_ETHER|IFM_NONE); } else { ifmedia_set(&sc->mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * Call MI attach routines. */ if_attach(ifp); ether_ifattach(ifp, eaddr); rnd_attach_source(&sc->rnd_source, device_xname(self), RND_TYPE_NET, RND_FLAG_DEFAULT); return; fail_4: for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if (txd->txd_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, txd->txd_dmamap); } fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->recv_dmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, sc->rtk_rx_buf, RTK_RXBUFLEN + 16); fail_1: bus_dmamem_free(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg); fail_0: return; } /* * Initialize the transmit descriptors. */ static void rtk_list_tx_init(struct rtk_softc *sc) { struct rtk_tx_desc *txd; int i; while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_free)) != NULL) SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_free, txd_q); for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; CSR_WRITE_4(sc, txd->txd_txaddr, 0); SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_free, txd, txd_q); } } /* * rtk_activate: * Handle device activation/deactivation requests. */ int rtk_activate(device_t self, enum devact act) { struct rtk_softc *sc = device_private(self); switch (act) { case DVACT_DEACTIVATE: if_deactivate(&sc->ethercom.ec_if); return 0; default: return EOPNOTSUPP; } } /* * rtk_detach: * Detach a rtk interface. */ int rtk_detach(struct rtk_softc *sc) { struct ifnet *ifp = &sc->ethercom.ec_if; struct rtk_tx_desc *txd; int i; /* * Succeed now if there isn't any work to do. */ if ((sc->sc_flags & RTK_ATTACHED) == 0) return 0; /* Unhook our tick handler. */ callout_stop(&sc->rtk_tick_ch); /* Detach all PHYs. */ mii_detach(&sc->mii, MII_PHY_ANY, MII_OFFSET_ANY); /* Delete all remaining media. */ ifmedia_delete_instance(&sc->mii.mii_media, IFM_INST_ANY); rnd_detach_source(&sc->rnd_source); ether_ifdetach(ifp); if_detach(ifp); for (i = 0; i < RTK_TX_LIST_CNT; i++) { txd = &sc->rtk_tx_descs[i]; if (txd->txd_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, txd->txd_dmamap); } bus_dmamap_destroy(sc->sc_dmat, sc->recv_dmamap); bus_dmamem_unmap(sc->sc_dmat, sc->rtk_rx_buf, RTK_RXBUFLEN + 16); bus_dmamem_free(sc->sc_dmat, &sc->sc_dmaseg, sc->sc_dmanseg); /* we don't want to run again */ sc->sc_flags &= ~RTK_ATTACHED; return 0; } /* * rtk_enable: * Enable the RTL81X9 chip. */ int rtk_enable(struct rtk_softc *sc) { if (RTK_IS_ENABLED(sc) == 0 && sc->sc_enable != NULL) { if ((*sc->sc_enable)(sc) != 0) { printf("%s: device enable failed\n", device_xname(sc->sc_dev)); return EIO; } sc->sc_flags |= RTK_ENABLED; } return 0; } /* * rtk_disable: * Disable the RTL81X9 chip. */ void rtk_disable(struct rtk_softc *sc) { if (RTK_IS_ENABLED(sc) && sc->sc_disable != NULL) { (*sc->sc_disable)(sc); sc->sc_flags &= ~RTK_ENABLED; } } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. * * You know there's something wrong with a PCI bus-master chip design. * * The receive operation is badly documented in the datasheet, so I'll * attempt to document it here. The driver provides a buffer area and * places its base address in the RX buffer start address register. * The chip then begins copying frames into the RX buffer. Each frame * is preceded by a 32-bit RX status word which specifies the length * of the frame and certain other status bits. Each frame (starting with * the status word) is also 32-bit aligned. The frame length is in the * first 16 bits of the status word; the lower 15 bits correspond with * the 'rx status register' mentioned in the datasheet. * * Note: to make the Alpha happy, the frame payload needs to be aligned * on a 32-bit boundary. To achieve this, we copy the data to mbuf * shifted forward 2 bytes. */ static void rtk_rxeof(struct rtk_softc *sc) { struct mbuf *m; struct ifnet *ifp; uint8_t *rxbufpos, *dst; u_int total_len, wrap; uint32_t rxstat; uint16_t cur_rx, new_rx; uint16_t limit; uint16_t rx_bytes, max_bytes; ifp = &sc->ethercom.ec_if; cur_rx = (CSR_READ_2(sc, RTK_CURRXADDR) + 16) % RTK_RXBUFLEN; /* Do not try to read past this point. */ limit = CSR_READ_2(sc, RTK_CURRXBUF) % RTK_RXBUFLEN; if (limit < cur_rx) max_bytes = (RTK_RXBUFLEN - cur_rx) + limit; else max_bytes = limit - cur_rx; rx_bytes = 0; while ((CSR_READ_1(sc, RTK_COMMAND) & RTK_CMD_EMPTY_RXBUF) == 0) { rxbufpos = sc->rtk_rx_buf + cur_rx; bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, RTK_RXSTAT_LEN, BUS_DMASYNC_POSTREAD); rxstat = le32toh(*(uint32_t *)rxbufpos); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, RTK_RXSTAT_LEN, BUS_DMASYNC_PREREAD); /* * Here's a totally undocumented fact for you. When the * RealTek chip is in the process of copying a packet into * RAM for you, the length will be 0xfff0. If you spot a * packet header with this value, you need to stop. The * datasheet makes absolutely no mention of this and * RealTek should be shot for this. */ total_len = rxstat >> 16; if (total_len == RTK_RXSTAT_UNFINISHED) break; if ((rxstat & RTK_RXSTAT_RXOK) == 0 || total_len < ETHER_MIN_LEN || total_len > (MCLBYTES - RTK_ETHER_ALIGN)) { ifp->if_ierrors++; /* * submitted by:[netbsd-pcmcia:00484] * Takahiro Kambe * obtain from: * FreeBSD if_rl.c rev 1.24->1.25 * */ #if 0 if (rxstat & (RTK_RXSTAT_BADSYM|RTK_RXSTAT_RUNT| RTK_RXSTAT_GIANT|RTK_RXSTAT_CRCERR| RTK_RXSTAT_ALIGNERR)) { CSR_WRITE_2(sc, RTK_COMMAND, RTK_CMD_TX_ENB); CSR_WRITE_2(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); CSR_WRITE_4(sc, RTK_RXCFG, RTK_RXCFG_CONFIG); CSR_WRITE_4(sc, RTK_RXADDR, sc->recv_dmamap->dm_segs[0].ds_addr); cur_rx = 0; } break; #else rtk_init(ifp); return; #endif } /* No errors; receive the packet. */ rx_bytes += total_len + RTK_RXSTAT_LEN; /* * Avoid trying to read more bytes than we know * the chip has prepared for us. */ if (rx_bytes > max_bytes) break; /* * Skip the status word, wrapping around to the beginning * of the Rx area, if necessary. */ cur_rx = (cur_rx + RTK_RXSTAT_LEN) % RTK_RXBUFLEN; rxbufpos = sc->rtk_rx_buf + cur_rx; /* * Compute the number of bytes at which the packet * will wrap to the beginning of the ring buffer. */ wrap = RTK_RXBUFLEN - cur_rx; /* * Compute where the next pending packet is. */ if (total_len > wrap) new_rx = total_len - wrap; else new_rx = cur_rx + total_len; /* Round up to 32-bit boundary. */ new_rx = roundup2(new_rx, sizeof(uint32_t)) % RTK_RXBUFLEN; /* * The RealTek chip includes the CRC with every * incoming packet; trim it off here. */ total_len -= ETHER_CRC_LEN; /* * Now allocate an mbuf (and possibly a cluster) to hold * the packet. Note we offset the packet 2 bytes so that * data after the Ethernet header will be 4-byte aligned. */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { printf("%s: unable to allocate Rx mbuf\n", device_xname(sc->sc_dev)); ifp->if_ierrors++; goto next_packet; } if (total_len > (MHLEN - RTK_ETHER_ALIGN)) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Rx cluster\n", device_xname(sc->sc_dev)); ifp->if_ierrors++; m_freem(m); m = NULL; goto next_packet; } } m->m_data += RTK_ETHER_ALIGN; /* for alignment */ m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = total_len; dst = mtod(m, void *); /* * If the packet wraps, copy up to the wrapping point. */ if (total_len > wrap) { bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, wrap, BUS_DMASYNC_POSTREAD); memcpy(dst, rxbufpos, wrap); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, wrap, BUS_DMASYNC_PREREAD); cur_rx = 0; rxbufpos = sc->rtk_rx_buf; total_len -= wrap; dst += wrap; } /* * ...and now the rest. */ bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, total_len, BUS_DMASYNC_POSTREAD); memcpy(dst, rxbufpos, total_len); bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, cur_rx, total_len, BUS_DMASYNC_PREREAD); next_packet: CSR_WRITE_2(sc, RTK_CURRXADDR, (new_rx - 16) % RTK_RXBUFLEN); cur_rx = new_rx; if (m == NULL) continue; ifp->if_ipackets++; bpf_mtap(ifp, m); /* pass it on. */ (*ifp->if_input)(ifp, m); } } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ static void rtk_txeof(struct rtk_softc *sc) { struct ifnet *ifp; struct rtk_tx_desc *txd; uint32_t txstat; ifp = &sc->ethercom.ec_if; /* * Go through our tx list and free mbufs for those * frames that have been uploaded. */ while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) { txstat = CSR_READ_4(sc, txd->txd_txstat); if ((txstat & (RTK_TXSTAT_TX_OK| RTK_TXSTAT_TX_UNDERRUN|RTK_TXSTAT_TXABRT)) == 0) break; SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); bus_dmamap_sync(sc->sc_dmat, txd->txd_dmamap, 0, txd->txd_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txd->txd_dmamap); m_freem(txd->txd_mbuf); txd->txd_mbuf = NULL; ifp->if_collisions += (txstat & RTK_TXSTAT_COLLCNT) >> 24; if (txstat & RTK_TXSTAT_TX_OK) ifp->if_opackets++; else { ifp->if_oerrors++; /* * Increase Early TX threshold if underrun occurred. * Increase step 64 bytes. */ if (txstat & RTK_TXSTAT_TX_UNDERRUN) { #ifdef DEBUG printf("%s: transmit underrun;", device_xname(sc->sc_dev)); #endif if (sc->sc_txthresh < RTK_TXTH_MAX) { sc->sc_txthresh += 2; #ifdef DEBUG printf(" new threshold: %d bytes", sc->sc_txthresh * 32); #endif } #ifdef DEBUG printf("\n"); #endif } if (txstat & (RTK_TXSTAT_TXABRT|RTK_TXSTAT_OUTOFWIN)) CSR_WRITE_4(sc, RTK_TXCFG, RTK_TXCFG_CONFIG); } SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_free, txd, txd_q); ifp->if_flags &= ~IFF_OACTIVE; } /* Clear the timeout timer if there is no pending packet. */ if (SIMPLEQ_EMPTY(&sc->rtk_tx_dirty)) ifp->if_timer = 0; } int rtk_intr(void *arg) { struct rtk_softc *sc; struct ifnet *ifp; uint16_t status; int handled; sc = arg; ifp = &sc->ethercom.ec_if; if (!device_has_power(sc->sc_dev)) return 0; /* Disable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, 0x0000); handled = 0; for (;;) { status = CSR_READ_2(sc, RTK_ISR); if (status == 0xffff) break; /* Card is gone... */ if (status) CSR_WRITE_2(sc, RTK_ISR, status); if ((status & RTK_INTRS) == 0) break; handled = 1; if (status & RTK_ISR_RX_OK) rtk_rxeof(sc); if (status & RTK_ISR_RX_ERR) rtk_rxeof(sc); if (status & (RTK_ISR_TX_OK|RTK_ISR_TX_ERR)) rtk_txeof(sc); if (status & RTK_ISR_SYSTEM_ERR) { rtk_reset(sc); rtk_init(ifp); } } /* Re-enable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS); if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) rtk_start(ifp); rnd_add_uint32(&sc->rnd_source, status); return handled; } /* * Main transmit routine. */ static void rtk_start(struct ifnet *ifp) { struct rtk_softc *sc; struct rtk_tx_desc *txd; struct mbuf *m_head, *m_new; int error, len; sc = ifp->if_softc; while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_free)) != NULL) { IFQ_POLL(&ifp->if_snd, m_head); if (m_head == NULL) break; m_new = NULL; /* * Load the DMA map. If this fails, the packet didn't * fit in one DMA segment, and we need to copy. Note, * the packet must also be aligned. * if the packet is too small, copy it too, so we're sure * so have enough room for the pad buffer. */ if ((mtod(m_head, uintptr_t) & 3) != 0 || m_head->m_pkthdr.len < ETHER_PAD_LEN || bus_dmamap_load_mbuf(sc->sc_dmat, txd->txd_dmamap, m_head, BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { printf("%s: unable to allocate Tx mbuf\n", device_xname(sc->sc_dev)); break; } if (m_head->m_pkthdr.len > MHLEN) { MCLGET(m_new, M_DONTWAIT); if ((m_new->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Tx " "cluster\n", device_xname(sc->sc_dev)); m_freem(m_new); break; } } m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, void *)); m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; if (m_head->m_pkthdr.len < ETHER_PAD_LEN) { memset( mtod(m_new, char *) + m_head->m_pkthdr.len, 0, ETHER_PAD_LEN - m_head->m_pkthdr.len); m_new->m_pkthdr.len = m_new->m_len = ETHER_PAD_LEN; } error = bus_dmamap_load_mbuf(sc->sc_dmat, txd->txd_dmamap, m_new, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load Tx buffer, " "error = %d\n", device_xname(sc->sc_dev), error); break; } } IFQ_DEQUEUE(&ifp->if_snd, m_head); /* * If there's a BPF listener, bounce a copy of this frame * to him. */ bpf_mtap(ifp, m_head); if (m_new != NULL) { m_freem(m_head); m_head = m_new; } txd->txd_mbuf = m_head; SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_free, txd_q); SIMPLEQ_INSERT_TAIL(&sc->rtk_tx_dirty, txd, txd_q); /* * Transmit the frame. */ bus_dmamap_sync(sc->sc_dmat, txd->txd_dmamap, 0, txd->txd_dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); len = txd->txd_dmamap->dm_segs[0].ds_len; CSR_WRITE_4(sc, txd->txd_txaddr, txd->txd_dmamap->dm_segs[0].ds_addr); CSR_WRITE_4(sc, txd->txd_txstat, RTK_TXSTAT_THRESH(sc->sc_txthresh) | len); /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } /* * We broke out of the loop because all our TX slots are * full. Mark the NIC as busy until it drains some of the * packets from the queue. */ if (SIMPLEQ_EMPTY(&sc->rtk_tx_free)) ifp->if_flags |= IFF_OACTIVE; } static int rtk_init(struct ifnet *ifp) { struct rtk_softc *sc = ifp->if_softc; int error, i; uint32_t rxcfg; if ((error = rtk_enable(sc)) != 0) goto out; /* * Cancel pending I/O. */ rtk_stop(ifp, 0); /* Init our MAC address */ for (i = 0; i < ETHER_ADDR_LEN; i++) { CSR_WRITE_1(sc, RTK_IDR0 + i, CLLADDR(ifp->if_sadl)[i]); } /* Init the RX buffer pointer register. */ bus_dmamap_sync(sc->sc_dmat, sc->recv_dmamap, 0, sc->recv_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); CSR_WRITE_4(sc, RTK_RXADDR, sc->recv_dmamap->dm_segs[0].ds_addr); /* Init TX descriptors. */ rtk_list_tx_init(sc); /* Init Early TX threshold. */ sc->sc_txthresh = RTK_TXTH_256; /* * Enable transmit and receive. */ CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); /* * Set the initial TX and RX configuration. */ CSR_WRITE_4(sc, RTK_TXCFG, RTK_TXCFG_CONFIG); CSR_WRITE_4(sc, RTK_RXCFG, RTK_RXCFG_CONFIG); /* Set the individual bit to receive frames for this host only. */ rxcfg = CSR_READ_4(sc, RTK_RXCFG); rxcfg |= RTK_RXCFG_RX_INDIV; /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { rxcfg |= RTK_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } else { rxcfg &= ~RTK_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } /* * Set capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) { rxcfg |= RTK_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } else { rxcfg &= ~RTK_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); } /* * Program the multicast filter, if necessary. */ rtk_setmulti(sc); /* * Enable interrupts. */ CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS); /* Start RX/TX process. */ CSR_WRITE_4(sc, RTK_MISSEDPKT, 0); /* Enable receiver and transmitter. */ CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB|RTK_CMD_RX_ENB); CSR_WRITE_1(sc, RTK_CFG1, RTK_CFG1_DRVLOAD|RTK_CFG1_FULLDUPLEX); /* * Set current media. */ if ((error = ether_mediachange(ifp)) != 0) goto out; ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; callout_reset(&sc->rtk_tick_ch, hz, rtk_tick, sc); out: if (error) { ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; printf("%s: interface not running\n", device_xname(sc->sc_dev)); } return error; } static int rtk_ioctl(struct ifnet *ifp, u_long command, void *data) { struct rtk_softc *sc = ifp->if_softc; int s, error; s = splnet(); error = ether_ioctl(ifp, command, data); if (error == ENETRESET) { if (ifp->if_flags & IFF_RUNNING) { /* * Multicast list has changed. Set the * hardware filter accordingly. */ rtk_setmulti(sc); } error = 0; } splx(s); return error; } static void rtk_watchdog(struct ifnet *ifp) { struct rtk_softc *sc; sc = ifp->if_softc; printf("%s: watchdog timeout\n", device_xname(sc->sc_dev)); ifp->if_oerrors++; rtk_txeof(sc); rtk_rxeof(sc); rtk_init(ifp); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void rtk_stop(struct ifnet *ifp, int disable) { struct rtk_softc *sc = ifp->if_softc; struct rtk_tx_desc *txd; callout_stop(&sc->rtk_tick_ch); mii_down(&sc->mii); CSR_WRITE_1(sc, RTK_COMMAND, 0x00); CSR_WRITE_2(sc, RTK_IMR, 0x0000); /* * Free the TX list buffers. */ while ((txd = SIMPLEQ_FIRST(&sc->rtk_tx_dirty)) != NULL) { SIMPLEQ_REMOVE_HEAD(&sc->rtk_tx_dirty, txd_q); bus_dmamap_unload(sc->sc_dmat, txd->txd_dmamap); m_freem(txd->txd_mbuf); txd->txd_mbuf = NULL; CSR_WRITE_4(sc, txd->txd_txaddr, 0); } if (disable) rtk_disable(sc); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } static void rtk_tick(void *arg) { struct rtk_softc *sc = arg; int s; s = splnet(); mii_tick(&sc->mii); splx(s); callout_reset(&sc->rtk_tick_ch, hz, rtk_tick, sc); }