/* $NetBSD: if_ste.c,v 1.21 2005/02/27 00:27:33 perry Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for the Sundance Tech. ST-201 10/100 * Ethernet controller. */ #include __KERNEL_RCSID(0, "$NetBSD: if_ste.c,v 1.21 2005/02/27 00:27:33 perry Exp $"); #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include /* for PAGE_SIZE */ #include #include #include #include #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include #include #include /* * Transmit descriptor list size. */ #define STE_NTXDESC 256 #define STE_NTXDESC_MASK (STE_NTXDESC - 1) #define STE_NEXTTX(x) (((x) + 1) & STE_NTXDESC_MASK) /* * Receive descriptor list size. */ #define STE_NRXDESC 128 #define STE_NRXDESC_MASK (STE_NRXDESC - 1) #define STE_NEXTRX(x) (((x) + 1) & STE_NRXDESC_MASK) /* * Control structures are DMA'd to the ST-201 chip. We allocate them in * a single clump that maps to a single DMA segment to make several things * easier. */ struct ste_control_data { /* * The transmit descriptors. */ struct ste_tfd scd_txdescs[STE_NTXDESC]; /* * The receive descriptors. */ struct ste_rfd scd_rxdescs[STE_NRXDESC]; }; #define STE_CDOFF(x) offsetof(struct ste_control_data, x) #define STE_CDTXOFF(x) STE_CDOFF(scd_txdescs[(x)]) #define STE_CDRXOFF(x) STE_CDOFF(scd_rxdescs[(x)]) /* * Software state for transmit and receive jobs. */ struct ste_descsoft { struct mbuf *ds_mbuf; /* head of our mbuf chain */ bus_dmamap_t ds_dmamap; /* our DMA map */ }; /* * Software state per device. */ struct ste_softc { struct device sc_dev; /* generic device information */ bus_space_tag_t sc_st; /* bus space tag */ bus_space_handle_t sc_sh; /* bus space handle */ bus_dma_tag_t sc_dmat; /* bus DMA tag */ struct ethercom sc_ethercom; /* ethernet common data */ void *sc_sdhook; /* shutdown hook */ void *sc_ih; /* interrupt cookie */ struct mii_data sc_mii; /* MII/media information */ struct callout sc_tick_ch; /* tick callout */ bus_dmamap_t sc_cddmamap; /* control data DMA map */ #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr /* * Software state for transmit and receive descriptors. */ struct ste_descsoft sc_txsoft[STE_NTXDESC]; struct ste_descsoft sc_rxsoft[STE_NRXDESC]; /* * Control data structures. */ struct ste_control_data *sc_control_data; #define sc_txdescs sc_control_data->scd_txdescs #define sc_rxdescs sc_control_data->scd_rxdescs int sc_txpending; /* number of Tx requests pending */ int sc_txdirty; /* first dirty Tx descriptor */ int sc_txlast; /* last used Tx descriptor */ int sc_rxptr; /* next ready Rx descriptor/descsoft */ int sc_txthresh; /* Tx threshold */ uint32_t sc_DMACtrl; /* prototype DMACtrl register */ uint16_t sc_IntEnable; /* prototype IntEnable register */ uint16_t sc_MacCtrl0; /* prototype MacCtrl0 register */ uint8_t sc_ReceiveMode; /* prototype ReceiveMode register */ }; #define STE_CDTXADDR(sc, x) ((sc)->sc_cddma + STE_CDTXOFF((x))) #define STE_CDRXADDR(sc, x) ((sc)->sc_cddma + STE_CDRXOFF((x))) #define STE_CDTXSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ STE_CDTXOFF((x)), sizeof(struct ste_tfd), (ops)) #define STE_CDRXSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ STE_CDRXOFF((x)), sizeof(struct ste_rfd), (ops)) #define STE_INIT_RXDESC(sc, x) \ do { \ struct ste_descsoft *__ds = &(sc)->sc_rxsoft[(x)]; \ struct ste_rfd *__rfd = &(sc)->sc_rxdescs[(x)]; \ struct mbuf *__m = __ds->ds_mbuf; \ \ /* \ * Note: We scoot the packet forward 2 bytes in the buffer \ * so that the payload after the Ethernet header is aligned \ * to a 4-byte boundary. \ */ \ __m->m_data = __m->m_ext.ext_buf + 2; \ __rfd->rfd_frag.frag_addr = \ htole32(__ds->ds_dmamap->dm_segs[0].ds_addr + 2); \ __rfd->rfd_frag.frag_len = htole32((MCLBYTES - 2) | FRAG_LAST); \ __rfd->rfd_next = htole32(STE_CDRXADDR((sc), STE_NEXTRX((x)))); \ __rfd->rfd_status = 0; \ STE_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ } while (/*CONSTCOND*/0) #define STE_TIMEOUT 1000 static void ste_start(struct ifnet *); static void ste_watchdog(struct ifnet *); static int ste_ioctl(struct ifnet *, u_long, caddr_t); static int ste_init(struct ifnet *); static void ste_stop(struct ifnet *, int); static void ste_shutdown(void *); static void ste_reset(struct ste_softc *, u_int32_t); static void ste_setthresh(struct ste_softc *); static void ste_txrestart(struct ste_softc *, u_int8_t); static void ste_rxdrain(struct ste_softc *); static int ste_add_rxbuf(struct ste_softc *, int); static void ste_read_eeprom(struct ste_softc *, int, uint16_t *); static void ste_tick(void *); static void ste_stats_update(struct ste_softc *); static void ste_set_filter(struct ste_softc *); static int ste_intr(void *); static void ste_txintr(struct ste_softc *); static void ste_rxintr(struct ste_softc *); static int ste_mii_readreg(struct device *, int, int); static void ste_mii_writereg(struct device *, int, int, int); static void ste_mii_statchg(struct device *); static int ste_mediachange(struct ifnet *); static void ste_mediastatus(struct ifnet *, struct ifmediareq *); static int ste_match(struct device *, struct cfdata *, void *); static void ste_attach(struct device *, struct device *, void *); int ste_copy_small = 0; CFATTACH_DECL(ste, sizeof(struct ste_softc), ste_match, ste_attach, NULL, NULL); static uint32_t ste_mii_bitbang_read(struct device *); static void ste_mii_bitbang_write(struct device *, uint32_t); static const struct mii_bitbang_ops ste_mii_bitbang_ops = { ste_mii_bitbang_read, ste_mii_bitbang_write, { PC_MgmtData, /* MII_BIT_MDO */ PC_MgmtData, /* MII_BIT_MDI */ PC_MgmtClk, /* MII_BIT_MDC */ PC_MgmtDir, /* MII_BIT_DIR_HOST_PHY */ 0, /* MII_BIT_DIR_PHY_HOST */ } }; /* * Devices supported by this driver. */ static const struct ste_product { pci_vendor_id_t ste_vendor; pci_product_id_t ste_product; const char *ste_name; } ste_products[] = { { PCI_VENDOR_SUNDANCETI, PCI_PRODUCT_SUNDANCETI_ST201, "Sundance ST-201 10/100 Ethernet" }, { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DL1002, "D-Link DL-1002 10/100 Ethernet" }, { 0, 0, NULL }, }; static const struct ste_product * ste_lookup(const struct pci_attach_args *pa) { const struct ste_product *sp; for (sp = ste_products; sp->ste_name != NULL; sp++) { if (PCI_VENDOR(pa->pa_id) == sp->ste_vendor && PCI_PRODUCT(pa->pa_id) == sp->ste_product) return (sp); } return (NULL); } static int ste_match(struct device *parent, struct cfdata *cf, void *aux) { struct pci_attach_args *pa = aux; if (ste_lookup(pa) != NULL) return (1); return (0); } static void ste_attach(struct device *parent, struct device *self, void *aux) { struct ste_softc *sc = (struct ste_softc *) self; struct pci_attach_args *pa = aux; struct ifnet *ifp = &sc->sc_ethercom.ec_if; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; const char *intrstr = NULL; bus_space_tag_t iot, memt; bus_space_handle_t ioh, memh; bus_dma_segment_t seg; int ioh_valid, memh_valid; int i, rseg, error; const struct ste_product *sp; pcireg_t pmode; uint8_t enaddr[ETHER_ADDR_LEN]; uint16_t myea[ETHER_ADDR_LEN / 2]; int pmreg; callout_init(&sc->sc_tick_ch); sp = ste_lookup(pa); if (sp == NULL) { printf("\n"); panic("ste_attach: impossible"); } printf(": %s\n", sp->ste_name); /* * Map the device. */ ioh_valid = (pci_mapreg_map(pa, STE_PCI_IOBA, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL) == 0); memh_valid = (pci_mapreg_map(pa, STE_PCI_MMBA, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &memt, &memh, NULL, NULL) == 0); if (memh_valid) { sc->sc_st = memt; sc->sc_sh = memh; } else if (ioh_valid) { sc->sc_st = iot; sc->sc_sh = ioh; } else { printf("%s: unable to map device registers\n", sc->sc_dev.dv_xname); return; } sc->sc_dmat = pa->pa_dmat; /* Enable bus mastering. */ pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) | PCI_COMMAND_MASTER_ENABLE); /* Get it out of power save mode if needed. */ if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) { pmode = pci_conf_read(pc, pa->pa_tag, pmreg + PCI_PMCSR) & PCI_PMCSR_STATE_MASK; if (pmode == PCI_PMCSR_STATE_D3) { /* * The card has lost all configuration data in * this state, so punt. */ printf("%s: unable to wake up from power state D3\n", sc->sc_dev.dv_xname); return; } if (pmode != PCI_PMCSR_STATE_D0) { printf("%s: waking up from power state D%d\n", sc->sc_dev.dv_xname, pmode); pci_conf_write(pc, pa->pa_tag, pmreg + PCI_PMCSR, PCI_PMCSR_STATE_D0); } } /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih)) { printf("%s: unable to map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, ste_intr, sc); if (sc->sc_ih == NULL) { printf("%s: unable to establish interrupt", sc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); /* * Allocate the control data structures, and create and load the * DMA map for it. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct ste_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 0)) != 0) { printf("%s: unable to allocate control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct ste_control_data), (caddr_t *)&sc->sc_control_data, BUS_DMA_COHERENT)) != 0) { printf("%s: unable to map control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct ste_control_data), 1, sizeof(struct ste_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { printf("%s: unable to create control data DMA map, " "error = %d\n", sc->sc_dev.dv_xname, error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, sc->sc_control_data, sizeof(struct ste_control_data), NULL, 0)) != 0) { printf("%s: unable to load control data DMA map, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_3; } /* * Create the transmit buffer DMA maps. */ for (i = 0; i < STE_NTXDESC; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, STE_NTXFRAGS, MCLBYTES, 0, 0, &sc->sc_txsoft[i].ds_dmamap)) != 0) { printf("%s: unable to create tx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_4; } } /* * Create the receive buffer DMA maps. */ for (i = 0; i < STE_NRXDESC; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, 0, &sc->sc_rxsoft[i].ds_dmamap)) != 0) { printf("%s: unable to create rx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_5; } sc->sc_rxsoft[i].ds_mbuf = NULL; } /* * Reset the chip to a known state. */ ste_reset(sc, AC_GlobalReset | AC_RxReset | AC_TxReset | AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit | AC_RstOut); /* * Read the Ethernet address from the EEPROM. */ for (i = 0; i < 3; i++) { ste_read_eeprom(sc, STE_EEPROM_StationAddress0 + i, &myea[i]); myea[i] = le16toh(myea[i]); } memcpy(enaddr, myea, sizeof(enaddr)); printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, ether_sprintf(enaddr)); /* * Initialize our media structures and probe the MII. */ sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = ste_mii_readreg; sc->sc_mii.mii_writereg = ste_mii_writereg; sc->sc_mii.mii_statchg = ste_mii_statchg; ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, ste_mediachange, ste_mediastatus); mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); ifp = &sc->sc_ethercom.ec_if; strcpy(ifp->if_xname, sc->sc_dev.dv_xname); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = ste_ioctl; ifp->if_start = ste_start; ifp->if_watchdog = ste_watchdog; ifp->if_init = ste_init; ifp->if_stop = ste_stop; IFQ_SET_READY(&ifp->if_snd); /* * Default the transmit threshold to 128 bytes. */ sc->sc_txthresh = 128; /* * Disable MWI if the PCI layer tells us to. */ sc->sc_DMACtrl = 0; if ((pa->pa_flags & PCI_FLAGS_MWI_OKAY) == 0) sc->sc_DMACtrl |= DC_MWIDisable; /* * We can support 802.1Q VLAN-sized frames. */ sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp, enaddr); /* * Make sure the interface is shutdown during reboot. */ sc->sc_sdhook = shutdownhook_establish(ste_shutdown, sc); if (sc->sc_sdhook == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); return; /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall through. */ fail_5: for (i = 0; i < STE_NRXDESC; i++) { if (sc->sc_rxsoft[i].ds_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxsoft[i].ds_dmamap); } fail_4: for (i = 0; i < STE_NTXDESC; i++) { if (sc->sc_txsoft[i].ds_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_txsoft[i].ds_dmamap); } bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, sizeof(struct ste_control_data)); fail_1: bus_dmamem_free(sc->sc_dmat, &seg, rseg); fail_0: return; } /* * ste_shutdown: * * Make sure the interface is stopped at reboot time. */ static void ste_shutdown(void *arg) { struct ste_softc *sc = arg; ste_stop(&sc->sc_ethercom.ec_if, 1); } static void ste_dmahalt_wait(struct ste_softc *sc) { int i; for (i = 0; i < STE_TIMEOUT; i++) { delay(2); if ((bus_space_read_4(sc->sc_st, sc->sc_sh, STE_DMACtrl) & DC_DMAHaltBusy) == 0) break; } if (i == STE_TIMEOUT) printf("%s: DMA halt timed out\n", sc->sc_dev.dv_xname); } /* * ste_start: [ifnet interface function] * * Start packet transmission on the interface. */ static void ste_start(struct ifnet *ifp) { struct ste_softc *sc = ifp->if_softc; struct mbuf *m0, *m; struct ste_descsoft *ds; struct ste_tfd *tfd; bus_dmamap_t dmamap; int error, olasttx, nexttx, opending, seg, totlen; if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) return; /* * Remember the previous number of pending transmissions * and the current last descriptor in the list. */ opending = sc->sc_txpending; olasttx = sc->sc_txlast; /* * Loop through the send queue, setting up transmit descriptors * until we drain the queue, or use up all available transmit * descriptors. */ while (sc->sc_txpending < STE_NTXDESC) { /* * Grab a packet off the queue. */ IFQ_POLL(&ifp->if_snd, m0); if (m0 == NULL) break; m = NULL; /* * Get the last and next available transmit descriptor. */ nexttx = STE_NEXTTX(sc->sc_txlast); tfd = &sc->sc_txdescs[nexttx]; ds = &sc->sc_txsoft[nexttx]; dmamap = ds->ds_dmamap; /* * Load the DMA map. If this fails, the packet either * didn't fit in the alloted number of segments, or we * were short on resources. In this case, we'll copy * and try again. */ if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { printf("%s: unable to allocate Tx mbuf\n", sc->sc_dev.dv_xname); break; } if (m0->m_pkthdr.len > MHLEN) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Tx " "cluster\n", sc->sc_dev.dv_xname); m_freem(m); break; } } m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load Tx buffer, " "error = %d\n", sc->sc_dev.dv_xname, error); break; } } IFQ_DEQUEUE(&ifp->if_snd, m0); if (m != NULL) { m_freem(m0); m0 = m; } /* * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. */ /* Sync the DMA map. */ bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); /* Initialize the fragment list. */ for (totlen = 0, seg = 0; seg < dmamap->dm_nsegs; seg++) { tfd->tfd_frags[seg].frag_addr = htole32(dmamap->dm_segs[seg].ds_addr); tfd->tfd_frags[seg].frag_len = htole32(dmamap->dm_segs[seg].ds_len); totlen += dmamap->dm_segs[seg].ds_len; } tfd->tfd_frags[seg - 1].frag_len |= htole32(FRAG_LAST); /* Initialize the descriptor. */ tfd->tfd_next = htole32(STE_CDTXADDR(sc, nexttx)); tfd->tfd_control = htole32(TFD_FrameId(nexttx) | (totlen & 3)); /* Sync the descriptor. */ STE_CDTXSYNC(sc, nexttx, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Store a pointer to the packet so we can free it later, * and remember what txdirty will be once the packet is * done. */ ds->ds_mbuf = m0; /* Advance the tx pointer. */ sc->sc_txpending++; sc->sc_txlast = nexttx; #if NBPFILTER > 0 /* * Pass the packet to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m0); #endif /* NBPFILTER > 0 */ } if (sc->sc_txpending == STE_NTXDESC) { /* No more slots left; notify upper layer. */ ifp->if_flags |= IFF_OACTIVE; } if (sc->sc_txpending != opending) { /* * We enqueued packets. If the transmitter was idle, * reset the txdirty pointer. */ if (opending == 0) sc->sc_txdirty = STE_NEXTTX(olasttx); /* * Cause a descriptor interrupt to happen on the * last packet we enqueued, and also cause the * DMA engine to wait after is has finished processing * it. */ sc->sc_txdescs[sc->sc_txlast].tfd_next = 0; sc->sc_txdescs[sc->sc_txlast].tfd_control |= htole32(TFD_TxDMAIndicate); STE_CDTXSYNC(sc, sc->sc_txlast, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Link up the new chain of descriptors to the * last. */ sc->sc_txdescs[olasttx].tfd_next = htole32(STE_CDTXADDR(sc, STE_NEXTTX(olasttx))); STE_CDTXSYNC(sc, olasttx, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Kick the transmit DMA logic. Note that since we're * using auto-polling, reading the Tx desc pointer will * give it the nudge it needs to get going. */ if (bus_space_read_4(sc->sc_st, sc->sc_sh, STE_TxDMAListPtr) == 0) { bus_space_write_4(sc->sc_st, sc->sc_sh, STE_DMACtrl, DC_TxDMAHalt); ste_dmahalt_wait(sc); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_TxDMAListPtr, STE_CDTXADDR(sc, STE_NEXTTX(olasttx))); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_DMACtrl, DC_TxDMAResume); } /* Set a watchdog timer in case the chip flakes out. */ ifp->if_timer = 5; } } /* * ste_watchdog: [ifnet interface function] * * Watchdog timer handler. */ static void ste_watchdog(struct ifnet *ifp) { struct ste_softc *sc = ifp->if_softc; printf("%s: device timeout\n", sc->sc_dev.dv_xname); ifp->if_oerrors++; (void) ste_init(ifp); /* Try to get more packets going. */ ste_start(ifp); } /* * ste_ioctl: [ifnet interface function] * * Handle control requests from the operator. */ static int ste_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct ste_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; int s, error; s = splnet(); switch (cmd) { case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); break; default: error = ether_ioctl(ifp, cmd, data); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ if (ifp->if_flags & IFF_RUNNING) ste_set_filter(sc); error = 0; } break; } /* Try to get more packets going. */ ste_start(ifp); splx(s); return (error); } /* * ste_intr: * * Interrupt service routine. */ static int ste_intr(void *arg) { struct ste_softc *sc = arg; struct ifnet *ifp = &sc->sc_ethercom.ec_if; uint16_t isr; uint8_t txstat; int wantinit; if ((bus_space_read_2(sc->sc_st, sc->sc_sh, STE_IntStatus) & IS_InterruptStatus) == 0) return (0); for (wantinit = 0; wantinit == 0;) { isr = bus_space_read_2(sc->sc_st, sc->sc_sh, STE_IntStatusAck); if ((isr & sc->sc_IntEnable) == 0) break; /* Receive interrupts. */ if (isr & IE_RxDMAComplete) ste_rxintr(sc); /* Transmit interrupts. */ if (isr & (IE_TxDMAComplete|IE_TxComplete)) ste_txintr(sc); /* Statistics overflow. */ if (isr & IE_UpdateStats) ste_stats_update(sc); /* Transmission errors. */ if (isr & IE_TxComplete) { for (;;) { txstat = bus_space_read_1(sc->sc_st, sc->sc_sh, STE_TxStatus); if ((txstat & TS_TxComplete) == 0) break; if (txstat & TS_TxUnderrun) { sc->sc_txthresh += 32; if (sc->sc_txthresh > 0x1ffc) sc->sc_txthresh = 0x1ffc; printf("%s: transmit underrun, new " "threshold: %d bytes\n", sc->sc_dev.dv_xname, sc->sc_txthresh); ste_reset(sc, AC_TxReset | AC_DMA | AC_FIFO | AC_Network); ste_setthresh(sc); bus_space_write_1(sc->sc_st, sc->sc_sh, STE_TxDMAPollPeriod, 127); ste_txrestart(sc, bus_space_read_1(sc->sc_st, sc->sc_sh, STE_TxFrameId)); } if (txstat & TS_TxReleaseError) { printf("%s: Tx FIFO release error\n", sc->sc_dev.dv_xname); wantinit = 1; } if (txstat & TS_MaxCollisions) { printf("%s: excessive collisions\n", sc->sc_dev.dv_xname); wantinit = 1; } if (txstat & TS_TxStatusOverflow) { printf("%s: status overflow\n", sc->sc_dev.dv_xname); wantinit = 1; } bus_space_write_2(sc->sc_st, sc->sc_sh, STE_TxStatus, 0); } } /* Host interface errors. */ if (isr & IE_HostError) { printf("%s: Host interface error\n", sc->sc_dev.dv_xname); wantinit = 1; } } if (wantinit) ste_init(ifp); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_IntEnable, sc->sc_IntEnable); /* Try to get more packets going. */ ste_start(ifp); return (1); } /* * ste_txintr: * * Helper; handle transmit interrupts. */ static void ste_txintr(struct ste_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ste_descsoft *ds; uint32_t control; int i; ifp->if_flags &= ~IFF_OACTIVE; /* * Go through our Tx list and free mbufs for those * frames which have been transmitted. */ for (i = sc->sc_txdirty; sc->sc_txpending != 0; i = STE_NEXTTX(i), sc->sc_txpending--) { ds = &sc->sc_txsoft[i]; STE_CDTXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); control = le32toh(sc->sc_txdescs[i].tfd_control); if ((control & TFD_TxDMAComplete) == 0) break; bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); m_freem(ds->ds_mbuf); ds->ds_mbuf = NULL; } /* Update the dirty transmit buffer pointer. */ sc->sc_txdirty = i; /* * If there are no more pending transmissions, cancel the watchdog * timer. */ if (sc->sc_txpending == 0) ifp->if_timer = 0; } /* * ste_rxintr: * * Helper; handle receive interrupts. */ static void ste_rxintr(struct ste_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ste_descsoft *ds; struct mbuf *m; uint32_t status; int i, len; for (i = sc->sc_rxptr;; i = STE_NEXTRX(i)) { ds = &sc->sc_rxsoft[i]; STE_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); status = le32toh(sc->sc_rxdescs[i].rfd_status); if ((status & RFD_RxDMAComplete) == 0) break; /* * If the packet had an error, simply recycle the * buffer. Note, we count the error later in the * periodic stats update. */ if (status & RFD_RxFrameError) { STE_INIT_RXDESC(sc, i); continue; } bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); /* * No errors; receive the packet. Note, we have * configured the chip to not include the CRC at * the end of the packet. */ len = RFD_RxDMAFrameLen(status); /* * If the packet is small enough to fit in a * single header mbuf, allocate one and copy * the data into it. This greatly reduces * memory consumption when we receive lots * of small packets. * * Otherwise, we add a new buffer to the receive * chain. If this fails, we drop the packet and * recycle the old buffer. */ if (ste_copy_small != 0 && len <= (MHLEN - 2)) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) goto dropit; m->m_data += 2; memcpy(mtod(m, caddr_t), mtod(ds->ds_mbuf, caddr_t), len); STE_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); } else { m = ds->ds_mbuf; if (ste_add_rxbuf(sc, i) != 0) { dropit: ifp->if_ierrors++; STE_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); continue; } } m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; #if NBPFILTER > 0 /* * Pass this up to any BPF listeners, but only * pass if up the stack if it's for us. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* NBPFILTER > 0 */ /* Pass it on. */ (*ifp->if_input)(ifp, m); } /* Update the receive pointer. */ sc->sc_rxptr = i; } /* * ste_tick: * * One second timer, used to tick the MII. */ static void ste_tick(void *arg) { struct ste_softc *sc = arg; int s; s = splnet(); mii_tick(&sc->sc_mii); ste_stats_update(sc); splx(s); callout_reset(&sc->sc_tick_ch, hz, ste_tick, sc); } /* * ste_stats_update: * * Read the ST-201 statistics counters. */ static void ste_stats_update(struct ste_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; bus_space_tag_t st = sc->sc_st; bus_space_handle_t sh = sc->sc_sh; (void) bus_space_read_2(st, sh, STE_OctetsReceivedOk0); (void) bus_space_read_2(st, sh, STE_OctetsReceivedOk1); (void) bus_space_read_2(st, sh, STE_OctetsTransmittedOk0); (void) bus_space_read_2(st, sh, STE_OctetsTransmittedOk1); ifp->if_opackets += (u_int) bus_space_read_2(st, sh, STE_FramesTransmittedOK); ifp->if_ipackets += (u_int) bus_space_read_2(st, sh, STE_FramesReceivedOK); ifp->if_collisions += (u_int) bus_space_read_1(st, sh, STE_LateCollisions) + (u_int) bus_space_read_1(st, sh, STE_MultipleColFrames) + (u_int) bus_space_read_1(st, sh, STE_SingleColFrames); (void) bus_space_read_1(st, sh, STE_FramesWDeferredXmt); ifp->if_ierrors += (u_int) bus_space_read_1(st, sh, STE_FramesLostRxErrors); ifp->if_oerrors += (u_int) bus_space_read_1(st, sh, STE_FramesWExDeferral) + (u_int) bus_space_read_1(st, sh, STE_FramesXbortXSColls) + bus_space_read_1(st, sh, STE_CarrierSenseErrors); (void) bus_space_read_1(st, sh, STE_BcstFramesXmtdOk); (void) bus_space_read_1(st, sh, STE_BcstFramesRcvdOk); (void) bus_space_read_1(st, sh, STE_McstFramesXmtdOk); (void) bus_space_read_1(st, sh, STE_McstFramesRcvdOk); } /* * ste_reset: * * Perform a soft reset on the ST-201. */ static void ste_reset(struct ste_softc *sc, u_int32_t rstbits) { uint32_t ac; int i; ac = bus_space_read_4(sc->sc_st, sc->sc_sh, STE_AsicCtrl); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_AsicCtrl, ac | rstbits); delay(50000); for (i = 0; i < STE_TIMEOUT; i++) { delay(1000); if ((bus_space_read_4(sc->sc_st, sc->sc_sh, STE_AsicCtrl) & AC_ResetBusy) == 0) break; } if (i == STE_TIMEOUT) printf("%s: reset failed to complete\n", sc->sc_dev.dv_xname); delay(1000); } /* * ste_setthresh: * * set the various transmit threshold registers */ static void ste_setthresh(struct ste_softc *sc) { /* set the TX threhold */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_TxStartThresh, sc->sc_txthresh); /* Urgent threshold: set to sc_txthresh / 2 */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_TxDMAUrgentThresh, sc->sc_txthresh >> 6); /* Burst threshold: use default value (256 bytes) */ } /* * restart TX at the given frame ID in the transmitter ring */ static void ste_txrestart(struct ste_softc *sc, u_int8_t id) { u_int32_t control; STE_CDTXSYNC(sc, id, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); control = le32toh(sc->sc_txdescs[id].tfd_control); control &= ~TFD_TxDMAComplete; sc->sc_txdescs[id].tfd_control = htole32(control); STE_CDTXSYNC(sc, id, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_TxDMAListPtr, 0); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_MacCtrl1, MC1_TxEnable); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_DMACtrl, DC_TxDMAHalt); ste_dmahalt_wait(sc); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_TxDMAListPtr, STE_CDTXADDR(sc, id)); bus_space_write_4(sc->sc_st, sc->sc_sh, STE_DMACtrl, DC_TxDMAResume); } /* * ste_init: [ ifnet interface function ] * * Initialize the interface. Must be called at splnet(). */ static int ste_init(struct ifnet *ifp) { struct ste_softc *sc = ifp->if_softc; bus_space_tag_t st = sc->sc_st; bus_space_handle_t sh = sc->sc_sh; struct ste_descsoft *ds; int i, error = 0; /* * Cancel any pending I/O. */ ste_stop(ifp, 0); /* * Reset the chip to a known state. */ ste_reset(sc, AC_GlobalReset | AC_RxReset | AC_TxReset | AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit | AC_RstOut); /* * Initialize the transmit descriptor ring. */ memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); sc->sc_txpending = 0; sc->sc_txdirty = 0; sc->sc_txlast = STE_NTXDESC - 1; /* * Initialize the receive descriptor and receive job * descriptor rings. */ for (i = 0; i < STE_NRXDESC; i++) { ds = &sc->sc_rxsoft[i]; if (ds->ds_mbuf == NULL) { if ((error = ste_add_rxbuf(sc, i)) != 0) { printf("%s: unable to allocate or map rx " "buffer %d, error = %d\n", sc->sc_dev.dv_xname, i, error); /* * XXX Should attempt to run with fewer receive * XXX buffers instead of just failing. */ ste_rxdrain(sc); goto out; } } else STE_INIT_RXDESC(sc, i); } sc->sc_rxptr = 0; /* Set the station address. */ for (i = 0; i < ETHER_ADDR_LEN; i++) bus_space_write_1(st, sh, STE_StationAddress0 + 1, LLADDR(ifp->if_sadl)[i]); /* Set up the receive filter. */ ste_set_filter(sc); /* * Give the receive ring to the chip. */ bus_space_write_4(st, sh, STE_RxDMAListPtr, STE_CDRXADDR(sc, sc->sc_rxptr)); /* * We defer giving the transmit ring to the chip until we * transmit the first packet. */ /* * Initialize the Tx auto-poll period. It's OK to make this number * large (127 is the max) -- we explicitly kick the transmit engine * when there's actually a packet. We are using auto-polling only * to make the interface to the transmit engine not suck. */ bus_space_write_1(sc->sc_st, sc->sc_sh, STE_TxDMAPollPeriod, 127); /* ..and the Rx auto-poll period. */ bus_space_write_1(st, sh, STE_RxDMAPollPeriod, 64); /* Initialize the Tx start threshold. */ ste_setthresh(sc); /* Set the FIFO release threshold to 512 bytes. */ bus_space_write_1(st, sh, STE_TxReleaseThresh, 512 >> 4); /* Set maximum packet size for VLAN. */ if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) bus_space_write_2(st, sh, STE_MaxFrameSize, ETHER_MAX_LEN + 4); else bus_space_write_2(st, sh, STE_MaxFrameSize, ETHER_MAX_LEN); /* * Initialize the interrupt mask. */ sc->sc_IntEnable = IE_HostError | IE_TxComplete | IE_UpdateStats | IE_TxDMAComplete | IE_RxDMAComplete; bus_space_write_2(st, sh, STE_IntStatus, 0xffff); bus_space_write_2(st, sh, STE_IntEnable, sc->sc_IntEnable); /* * Start the receive DMA engine. */ bus_space_write_4(st, sh, STE_DMACtrl, sc->sc_DMACtrl | DC_RxDMAResume); /* * Initialize MacCtrl0 -- do it before setting the media, * as setting the media will actually program the register. */ sc->sc_MacCtrl0 = MC0_IFSSelect(0); if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) sc->sc_MacCtrl0 |= MC0_RcvLargeFrames; /* * Set the current media. */ mii_mediachg(&sc->sc_mii); /* * Start the MAC. */ bus_space_write_2(st, sh, STE_MacCtrl1, MC1_StatisticsEnable | MC1_TxEnable | MC1_RxEnable); /* * Start the one second MII clock. */ callout_reset(&sc->sc_tick_ch, hz, ste_tick, sc); /* * ...all done! */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; out: if (error) printf("%s: interface not running\n", sc->sc_dev.dv_xname); return (error); } /* * ste_drain: * * Drain the receive queue. */ static void ste_rxdrain(struct ste_softc *sc) { struct ste_descsoft *ds; int i; for (i = 0; i < STE_NRXDESC; i++) { ds = &sc->sc_rxsoft[i]; if (ds->ds_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); m_freem(ds->ds_mbuf); ds->ds_mbuf = NULL; } } } /* * ste_stop: [ ifnet interface function ] * * Stop transmission on the interface. */ static void ste_stop(struct ifnet *ifp, int disable) { struct ste_softc *sc = ifp->if_softc; struct ste_descsoft *ds; int i; /* * Stop the one second clock. */ callout_stop(&sc->sc_tick_ch); /* Down the MII. */ mii_down(&sc->sc_mii); /* * Disable interrupts. */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_IntEnable, 0); /* * Stop receiver, transmitter, and stats update. */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_MacCtrl1, MC1_StatisticsDisable | MC1_TxDisable | MC1_RxDisable); /* * Stop the transmit and receive DMA. */ bus_space_write_4(sc->sc_st, sc->sc_sh, STE_DMACtrl, DC_RxDMAHalt | DC_TxDMAHalt); ste_dmahalt_wait(sc); /* * Release any queued transmit buffers. */ for (i = 0; i < STE_NTXDESC; i++) { ds = &sc->sc_txsoft[i]; if (ds->ds_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); m_freem(ds->ds_mbuf); ds->ds_mbuf = NULL; } } if (disable) ste_rxdrain(sc); /* * Mark the interface down and cancel the watchdog timer. */ ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } static int ste_eeprom_wait(struct ste_softc *sc) { int i; for (i = 0; i < STE_TIMEOUT; i++) { delay(1000); if ((bus_space_read_2(sc->sc_st, sc->sc_sh, STE_EepromCtrl) & EC_EepromBusy) == 0) return (0); } return (1); } /* * ste_read_eeprom: * * Read data from the serial EEPROM. */ static void ste_read_eeprom(struct ste_softc *sc, int offset, uint16_t *data) { if (ste_eeprom_wait(sc)) printf("%s: EEPROM failed to come ready\n", sc->sc_dev.dv_xname); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_EepromCtrl, EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_R)); if (ste_eeprom_wait(sc)) printf("%s: EEPROM read timed out\n", sc->sc_dev.dv_xname); *data = bus_space_read_2(sc->sc_st, sc->sc_sh, STE_EepromData); } /* * ste_add_rxbuf: * * Add a receive buffer to the indicated descriptor. */ static int ste_add_rxbuf(struct ste_softc *sc, int idx) { struct ste_descsoft *ds = &sc->sc_rxsoft[idx]; struct mbuf *m; int error; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); return (ENOBUFS); } if (ds->ds_mbuf != NULL) bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); ds->ds_mbuf = m; error = bus_dmamap_load(sc->sc_dmat, ds->ds_dmamap, m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT); if (error) { printf("%s: can't load rx DMA map %d, error = %d\n", sc->sc_dev.dv_xname, idx, error); panic("ste_add_rxbuf"); /* XXX */ } bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); STE_INIT_RXDESC(sc, idx); return (0); } /* * ste_set_filter: * * Set up the receive filter. */ static void ste_set_filter(struct ste_softc *sc) { struct ethercom *ec = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multi *enm; struct ether_multistep step; uint32_t crc; uint16_t mchash[4]; sc->sc_ReceiveMode = RM_ReceiveUnicast; if (ifp->if_flags & IFF_BROADCAST) sc->sc_ReceiveMode |= RM_ReceiveBroadcast; if (ifp->if_flags & IFF_PROMISC) { sc->sc_ReceiveMode |= RM_ReceiveAllFrames; goto allmulti; } /* * Set up the multicast address filter by passing all multicast * addresses through a CRC generator, and then using the low-order * 6 bits as an index into the 64 bit multicast hash table. The * high order bits select the register, while the rest of the bits * select the bit within the register. */ memset(mchash, 0, sizeof(mchash)); ETHER_FIRST_MULTI(step, ec, enm); if (enm == NULL) goto done; while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } crc = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN); /* Just want the 6 least significant bits. */ crc &= 0x3f; /* Set the corresponding bit in the hash table. */ mchash[crc >> 4] |= 1 << (crc & 0xf); ETHER_NEXT_MULTI(step, enm); } sc->sc_ReceiveMode |= RM_ReceiveMulticastHash; ifp->if_flags &= ~IFF_ALLMULTI; goto done; allmulti: ifp->if_flags |= IFF_ALLMULTI; sc->sc_ReceiveMode |= RM_ReceiveMulticast; done: if ((ifp->if_flags & IFF_ALLMULTI) == 0) { /* * Program the multicast hash table. */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_HashTable0, mchash[0]); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_HashTable1, mchash[1]); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_HashTable2, mchash[2]); bus_space_write_2(sc->sc_st, sc->sc_sh, STE_HashTable3, mchash[3]); } bus_space_write_1(sc->sc_st, sc->sc_sh, STE_ReceiveMode, sc->sc_ReceiveMode); } /* * ste_mii_readreg: [mii interface function] * * Read a PHY register on the MII of the ST-201. */ static int ste_mii_readreg(struct device *self, int phy, int reg) { return (mii_bitbang_readreg(self, &ste_mii_bitbang_ops, phy, reg)); } /* * ste_mii_writereg: [mii interface function] * * Write a PHY register on the MII of the ST-201. */ static void ste_mii_writereg(struct device *self, int phy, int reg, int val) { mii_bitbang_writereg(self, &ste_mii_bitbang_ops, phy, reg, val); } /* * ste_mii_statchg: [mii interface function] * * Callback from MII layer when media changes. */ static void ste_mii_statchg(struct device *self) { struct ste_softc *sc = (struct ste_softc *) self; if (sc->sc_mii.mii_media_active & IFM_FDX) sc->sc_MacCtrl0 |= MC0_FullDuplexEnable; else sc->sc_MacCtrl0 &= ~MC0_FullDuplexEnable; /* XXX 802.1x flow-control? */ bus_space_write_2(sc->sc_st, sc->sc_sh, STE_MacCtrl0, sc->sc_MacCtrl0); } /* * ste_mii_bitbang_read: [mii bit-bang interface function] * * Read the MII serial port for the MII bit-bang module. */ static uint32_t ste_mii_bitbang_read(struct device *self) { struct ste_softc *sc = (void *) self; return (bus_space_read_1(sc->sc_st, sc->sc_sh, STE_PhyCtrl)); } /* * ste_mii_bitbang_write: [mii big-bang interface function] * * Write the MII serial port for the MII bit-bang module. */ static void ste_mii_bitbang_write(struct device *self, uint32_t val) { struct ste_softc *sc = (void *) self; bus_space_write_1(sc->sc_st, sc->sc_sh, STE_PhyCtrl, val); } /* * ste_mediastatus: [ifmedia interface function] * * Get the current interface media status. */ static void ste_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct ste_softc *sc = ifp->if_softc; mii_pollstat(&sc->sc_mii); ifmr->ifm_status = sc->sc_mii.mii_media_status; ifmr->ifm_active = sc->sc_mii.mii_media_active; } /* * ste_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media. */ static int ste_mediachange(struct ifnet *ifp) { struct ste_softc *sc = ifp->if_softc; if (ifp->if_flags & IFF_UP) mii_mediachg(&sc->sc_mii); return (0); }