/* $NetBSD: sbc.c,v 1.18 1997/01/20 04:27:49 scottr Exp $ */ /* * Copyright (c) 1996 Scott Reynolds * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * 4. All advertising materials mentioning features or use of this software * must display the following acknowledgements: * This product includes software developed by Scott Reynolds. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains only the machine-dependent parts of the mac68k * NCR 5380 SCSI driver. (Autoconfig stuff and PDMA functions.) * The machine-independent parts are in ncr5380sbc.c * * Supported hardware includes: * Macintosh II family 5380-based controller * * Credits, history: * * Scott Reynolds wrote this module, based on work by Allen Briggs * (mac68k), Gordon W. Ross and David Jones (sun3), and Leo Weppelman * (atari). Thanks to Allen for supplying crucial interpretation of the * NetBSD/mac68k 1.1 'ncrscsi' driver. Also, Allen, Gordon, and Jason * Thorpe all helped to refine this code, and were considerable sources * of moral support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sbcreg.h" /* * Transfers smaller than this are done using PIO * (on assumption they're not worth PDMA overhead) */ #define MIN_DMA_LEN 128 /* * Transfers larger than 8192 bytes need to be split up * due to the size of the PDMA space. */ #define MAX_DMA_LEN 0x2000 /* * From Guide to the Macintosh Family Hardware, pp. 137-143 * These are offsets from SCSIBase (see pmap_bootstrap.c) */ #define SBC_REG_OFS 0x10000 #define SBC_DMA_OFS 0x12000 #define SBC_HSK_OFS 0x06000 #define SBC_DMA_OFS_PB500 0x06000 #define SBC_REG_OFS_IIFX 0x08000 /* Just guessing... */ #define SBC_DMA_OFS_IIFX 0x0c000 #define SBC_HSK_OFS_IIFX 0x0e000 #define SBC_REG_OFS_DUO2 0x00000 #define SBC_DMA_OFS_DUO2 0x02000 #define SBC_HSK_OFS_DUO2 0x04000 #ifdef SBC_DEBUG # define SBC_DB_INTR 0x01 # define SBC_DB_DMA 0x02 # define SBC_DB_REG 0x04 # define SBC_DB_BREAK 0x08 int sbc_debug = 0 /* | SBC_DB_INTR | SBC_DB_DMA */; int sbc_link_flags = 0 /* | SDEV_DB2 */; # ifndef DDB # define Debugger() printf("Debug: sbc.c:%d\n", __LINE__) # endif # define SBC_BREAK \ do { if (sbc_debug & SBC_DB_BREAK) Debugger(); } while (0) #else # define SBC_BREAK #endif /* * This structure is used to keep track of PDMA requests. */ struct sbc_pdma_handle { int dh_flags; /* flags */ #define SBC_DH_BUSY 0x01 /* This handle is in use */ #define SBC_DH_OUT 0x02 /* PDMA data out (write) */ #define SBC_DH_DONE 0x04 /* PDMA transfer is complete */ u_char *dh_addr; /* data buffer */ int dh_len; /* length of data buffer */ }; /* * The first structure member has to be the ncr5380_softc * so we can just cast to go back and forth between them. */ struct sbc_softc { struct ncr5380_softc ncr_sc; volatile struct sbc_regs *sc_regs; volatile vm_offset_t sc_drq_addr; volatile vm_offset_t sc_nodrq_addr; volatile u_int8_t *sc_ienable; volatile u_int8_t *sc_iflag; int sc_options; /* options for this instance. */ struct sbc_pdma_handle sc_pdma[SCI_OPENINGS]; }; /* * Options. By default, SCSI interrupts and reselect are disabled. * You may enable either of these features with the `flags' directive * in your kernel's configuration file. * * Alternatively, you can patch your kernel with DDB or some other * mechanism. The sc_options member of the softc is OR'd with * the value in sbc_options. * * The options code is based on the sparc 'si' driver's version of * the same. */ #define SBC_PDMA 0x01 /* Use PDMA for polled transfers */ #define SBC_INTR 0x02 /* Allow SCSI IRQ/DRQ interrupts */ #define SBC_RESELECT 0x04 /* Allow disconnect/reselect */ #define SBC_OPTIONS_MASK (SBC_RESELECT|SBC_INTR|SBC_PDMA) #define SBC_OPTIONS_BITS "\10\3RESELECT\2INTR\1PDMA" int sbc_options = SBC_PDMA; static int sbc_match __P((struct device *, struct cfdata *, void *)); static void sbc_attach __P((struct device *, struct device *, void *)); static void sbc_minphys __P((struct buf *bp)); static int sbc_wait_busy __P((struct ncr5380_softc *)); static int sbc_ready __P((struct ncr5380_softc *)); static int sbc_wait_dreq __P((struct ncr5380_softc *)); static int sbc_pdma_in __P((struct ncr5380_softc *, int, int, u_char *)); static int sbc_pdma_out __P((struct ncr5380_softc *, int, int, u_char *)); #ifdef SBC_DEBUG static void decode_5380_intr __P((struct ncr5380_softc *)); #endif void sbc_intr_enable __P((struct ncr5380_softc *)); void sbc_intr_disable __P((struct ncr5380_softc *)); void sbc_irq_intr __P((void *)); void sbc_drq_intr __P((void *)); void sbc_dma_alloc __P((struct ncr5380_softc *)); void sbc_dma_free __P((struct ncr5380_softc *)); void sbc_dma_poll __P((struct ncr5380_softc *)); void sbc_dma_setup __P((struct ncr5380_softc *)); void sbc_dma_start __P((struct ncr5380_softc *)); void sbc_dma_eop __P((struct ncr5380_softc *)); void sbc_dma_stop __P((struct ncr5380_softc *)); static struct scsi_adapter sbc_ops = { ncr5380_scsi_cmd, /* scsi_cmd() */ sbc_minphys, /* scsi_minphys() */ NULL, /* open_target_lu() */ NULL, /* close_target_lu() */ }; /* This is copied from julian's bt driver */ /* "so we have a default dev struct for our link struct." */ static struct scsi_device sbc_dev = { NULL, /* Use default error handler. */ NULL, /* Use default start handler. */ NULL, /* Use default async handler. */ NULL, /* Use default "done" routine. */ }; struct cfattach sbc_ca = { sizeof(struct sbc_softc), sbc_match, sbc_attach }; struct cfdriver sbc_cd = { NULL, "sbc", DV_DULL }; static int sbc_match(parent, cf, args) struct device *parent; struct cfdata *cf; void *args; { switch (current_mac_model->machineid) { case MACH_MACIIFX: /* Note: the IIfx isn't (yet) supported. */ break; case MACH_MACPB210: case MACH_MACPB230: case MACH_MACPB250: case MACH_MACPB270: case MACH_MACPB280: case MACH_MACPB280C: if (cf->cf_unit == 1) return 1; /*FALLTHROUGH*/ default: if (cf->cf_unit == 0 && mac68k_machine.scsi80) return 1; } return 0; } static void sbc_attach(parent, self, args) struct device *parent, *self; void *args; { struct sbc_softc *sc = (struct sbc_softc *) self; struct ncr5380_softc *ncr_sc = (struct ncr5380_softc *) sc; char bits[64]; extern vm_offset_t SCSIBase; /* Pull in the options flags. */ sc->sc_options = ((ncr_sc->sc_dev.dv_cfdata->cf_flags | sbc_options) & SBC_OPTIONS_MASK); /* * Set up offsets to 5380 registers and GLUE I/O space, and turn * off options we know we can't support on certain models. */ switch (current_mac_model->machineid) { case MACH_MACIIFX: /* Note: the IIfx isn't (yet) supported. */ sc->sc_regs = (struct sbc_regs *)(SCSIBase + SBC_REG_OFS_IIFX); sc->sc_drq_addr = (vm_offset_t)(SCSIBase + SBC_HSK_OFS_IIFX); sc->sc_nodrq_addr = (vm_offset_t)(SCSIBase + SBC_DMA_OFS_IIFX); sc->sc_options &= ~(SBC_INTR | SBC_RESELECT); break; case MACH_MACPB500: sc->sc_regs = (struct sbc_regs *)(SCSIBase + SBC_REG_OFS); sc->sc_drq_addr = (vm_offset_t)(SCSIBase + SBC_HSK_OFS); /*??*/ sc->sc_nodrq_addr = (vm_offset_t)(SCSIBase + SBC_DMA_OFS_PB500); sc->sc_options &= ~(SBC_INTR | SBC_RESELECT); break; case MACH_MACPB210: case MACH_MACPB230: case MACH_MACPB250: case MACH_MACPB270: case MACH_MACPB280: case MACH_MACPB280C: if (ncr_sc->sc_dev.dv_unit == 1) { sc->sc_regs = (struct sbc_regs *)(0xfee00000 + SBC_REG_OFS_DUO2); sc->sc_drq_addr = (vm_offset_t)(0xfee00000 + SBC_HSK_OFS_DUO2); sc->sc_nodrq_addr = (vm_offset_t)(0xfee00000 + SBC_DMA_OFS_DUO2); break; } /*FALLTHROUGH*/ default: sc->sc_regs = (struct sbc_regs *)(SCSIBase + SBC_REG_OFS); sc->sc_drq_addr = (vm_offset_t)(SCSIBase + SBC_HSK_OFS); sc->sc_nodrq_addr = (vm_offset_t)(SCSIBase + SBC_DMA_OFS); break; } /* * Fill in the prototype scsi_link. */ ncr_sc->sc_link.channel = SCSI_CHANNEL_ONLY_ONE; ncr_sc->sc_link.adapter_softc = sc; ncr_sc->sc_link.adapter_target = 7; ncr_sc->sc_link.adapter = &sbc_ops; ncr_sc->sc_link.device = &sbc_dev; /* * Initialize fields used by the MI code */ ncr_sc->sci_r0 = &sc->sc_regs->sci_pr0.sci_reg; ncr_sc->sci_r1 = &sc->sc_regs->sci_pr1.sci_reg; ncr_sc->sci_r2 = &sc->sc_regs->sci_pr2.sci_reg; ncr_sc->sci_r3 = &sc->sc_regs->sci_pr3.sci_reg; ncr_sc->sci_r4 = &sc->sc_regs->sci_pr4.sci_reg; ncr_sc->sci_r5 = &sc->sc_regs->sci_pr5.sci_reg; ncr_sc->sci_r6 = &sc->sc_regs->sci_pr6.sci_reg; ncr_sc->sci_r7 = &sc->sc_regs->sci_pr7.sci_reg; /* * MD function pointers used by the MI code. */ if (sc->sc_options & SBC_PDMA) { ncr_sc->sc_pio_out = sbc_pdma_out; ncr_sc->sc_pio_in = sbc_pdma_in; } else { ncr_sc->sc_pio_out = ncr5380_pio_out; ncr_sc->sc_pio_in = ncr5380_pio_in; } ncr_sc->sc_dma_alloc = NULL; ncr_sc->sc_dma_free = NULL; ncr_sc->sc_dma_poll = NULL; ncr_sc->sc_intr_on = NULL; ncr_sc->sc_intr_off = NULL; ncr_sc->sc_dma_setup = NULL; ncr_sc->sc_dma_start = NULL; ncr_sc->sc_dma_eop = NULL; ncr_sc->sc_dma_stop = NULL; ncr_sc->sc_flags = 0; ncr_sc->sc_min_dma_len = MIN_DMA_LEN; if (sc->sc_options & SBC_INTR) { if (sc->sc_options & SBC_RESELECT) ncr_sc->sc_flags |= NCR5380_PERMIT_RESELECT; ncr_sc->sc_dma_alloc = sbc_dma_alloc; ncr_sc->sc_dma_free = sbc_dma_free; ncr_sc->sc_dma_poll = sbc_dma_poll; ncr_sc->sc_dma_setup = sbc_dma_setup; ncr_sc->sc_dma_start = sbc_dma_start; ncr_sc->sc_dma_eop = sbc_dma_eop; ncr_sc->sc_dma_stop = sbc_dma_stop; mac68k_register_scsi_drq(sbc_drq_intr, ncr_sc); mac68k_register_scsi_irq(sbc_irq_intr, ncr_sc); } else ncr_sc->sc_flags |= NCR5380_FORCE_POLLING; /* * Initialize fields used only here in the MD code. */ if (VIA2 == VIA2OFF) { sc->sc_ienable = Via1Base + VIA2 * 0x2000 + vIER; sc->sc_iflag = Via1Base + VIA2 * 0x2000 + vIFR; } else { sc->sc_ienable = Via1Base + VIA2 * 0x2000 + rIER; sc->sc_iflag = Via1Base + VIA2 * 0x2000 + rIFR; } if (sc->sc_options) printf(": options=%s", bitmask_snprintf(sc->sc_options, SBC_OPTIONS_BITS, bits, sizeof(bits))); printf("\n"); /* Now enable SCSI interrupts through VIA2, if appropriate */ if (sc->sc_options & SBC_INTR) sbc_intr_enable(ncr_sc); #ifdef SBC_DEBUG if (sbc_debug) printf("%s: softc=%p regs=%p\n", ncr_sc->sc_dev.dv_xname, sc, sc->sc_regs); ncr_sc->sc_link.flags |= sbc_link_flags; #endif /* * Initialize the SCSI controller itself. */ ncr5380_init(ncr_sc); ncr5380_reset_scsibus(ncr_sc); config_found(self, &(ncr_sc->sc_link), scsiprint); } static void sbc_minphys(struct buf *bp) { if (bp->b_bcount > MAX_DMA_LEN) bp->b_bcount = MAX_DMA_LEN; return (minphys(bp)); } /*** * General support for Mac-specific SCSI logic. ***/ /* These are used in the following inline functions. */ int sbc_wait_busy_timo = 1000 * 5000; /* X2 = 10 S. */ int sbc_ready_timo = 1000 * 5000; /* X2 = 10 S. */ int sbc_wait_dreq_timo = 1000 * 5000; /* X2 = 10 S. */ /* Return zero on success. */ static __inline__ int sbc_wait_busy(sc) struct ncr5380_softc *sc; { register int timo = sbc_wait_busy_timo; for (;;) { if (SCI_BUSY(sc)) { timo = 0; /* return 0 */ break; } if (--timo < 0) break; /* return -1 */ delay(2); } return (timo); } static __inline__ int sbc_ready(sc) struct ncr5380_softc *sc; { register int timo = sbc_ready_timo; for (;;) { if ((*sc->sci_csr & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) == (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) { timo = 0; break; } if (((*sc->sci_csr & SCI_CSR_PHASE_MATCH) == 0) || (SCI_BUSY(sc) == 0)) { timo = -1; break; } if (--timo < 0) break; /* return -1 */ delay(2); } return (timo); } static __inline__ int sbc_wait_dreq(sc) struct ncr5380_softc *sc; { register int timo = sbc_wait_dreq_timo; for (;;) { if ((*sc->sci_csr & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) == (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) { timo = 0; break; } if (--timo < 0) break; /* return -1 */ delay(2); } return (timo); } /*** * Macintosh SCSI interrupt support routines. ***/ void sbc_intr_enable(ncr_sc) struct ncr5380_softc *ncr_sc; { register struct sbc_softc *sc = (struct sbc_softc *) ncr_sc; int s; s = splhigh(); *sc->sc_ienable = 0x80 | (V2IF_SCSIIRQ | V2IF_SCSIDRQ); splx(s); } void sbc_intr_disable(ncr_sc) struct ncr5380_softc *ncr_sc; { register struct sbc_softc *sc = (struct sbc_softc *) ncr_sc; int s; s = splhigh(); *sc->sc_ienable = (V2IF_SCSIIRQ | V2IF_SCSIDRQ); splx(s); } void sbc_irq_intr(p) void *p; { register struct ncr5380_softc *ncr_sc = p; register int claimed = 0; /* How we ever arrive here without IRQ set is a mystery... */ if (*ncr_sc->sci_csr & SCI_CSR_INT) { #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_INTR) decode_5380_intr(ncr_sc); #endif claimed = ncr5380_intr(ncr_sc); if (!claimed) { if (((*ncr_sc->sci_csr & ~SCI_CSR_PHASE_MATCH) == SCI_CSR_INT) && ((*ncr_sc->sci_bus_csr & ~SCI_BUS_RST) == 0)) SCI_CLR_INTR(ncr_sc); /* RST interrupt */ #ifdef SBC_DEBUG else { printf("%s: spurious intr\n", ncr_sc->sc_dev.dv_xname); SBC_BREAK; } #endif } } } #ifdef SBC_DEBUG void decode_5380_intr(ncr_sc) struct ncr5380_softc *ncr_sc; { register u_char csr = *ncr_sc->sci_csr; register u_char bus_csr = *ncr_sc->sci_bus_csr; if (((csr & ~(SCI_CSR_PHASE_MATCH | SCI_CSR_ATN)) == SCI_CSR_INT) && ((bus_csr & ~(SCI_BUS_MSG | SCI_BUS_CD | SCI_BUS_IO | SCI_BUS_DBP)) == SCI_BUS_SEL)) { if (csr & SCI_BUS_IO) printf("%s: reselect\n", ncr_sc->sc_dev.dv_xname); else printf("%s: select\n", ncr_sc->sc_dev.dv_xname); } else if (((csr & ~SCI_CSR_ACK) == (SCI_CSR_DONE | SCI_CSR_INT)) && ((bus_csr & (SCI_BUS_RST | SCI_BUS_BSY | SCI_BUS_SEL)) == SCI_BUS_BSY)) printf("%s: dma eop\n", ncr_sc->sc_dev.dv_xname); else if (((csr & ~SCI_CSR_PHASE_MATCH) == SCI_CSR_INT) && ((bus_csr & ~SCI_BUS_RST) == 0)) printf("%s: bus reset\n", ncr_sc->sc_dev.dv_xname); else if (((csr & ~(SCI_CSR_DREQ | SCI_CSR_ATN | SCI_CSR_ACK)) == (SCI_CSR_PERR | SCI_CSR_INT | SCI_CSR_PHASE_MATCH)) && ((bus_csr & (SCI_BUS_RST | SCI_BUS_BSY | SCI_BUS_SEL)) == SCI_BUS_BSY)) printf("%s: parity error\n", ncr_sc->sc_dev.dv_xname); else if (((csr & ~SCI_CSR_ATN) == SCI_CSR_INT) && ((bus_csr & (SCI_BUS_RST | SCI_BUS_BSY | SCI_BUS_REQ | SCI_BUS_SEL)) == (SCI_BUS_BSY | SCI_BUS_REQ))) printf("%s: phase mismatch\n", ncr_sc->sc_dev.dv_xname); else if (((csr & ~SCI_CSR_PHASE_MATCH) == (SCI_CSR_INT | SCI_CSR_DISC)) && (bus_csr == 0)) printf("%s: disconnect\n", ncr_sc->sc_dev.dv_xname); else printf("%s: unknown intr: csr=%x, bus_csr=%x\n", ncr_sc->sc_dev.dv_xname, csr, bus_csr); } #endif /*** * The following code implements polled PDMA. ***/ static int sbc_pdma_out(ncr_sc, phase, count, data) struct ncr5380_softc *ncr_sc; int phase; int count; u_char *data; { struct sbc_softc *sc = (struct sbc_softc *)ncr_sc; register volatile long *long_data = (long *) sc->sc_drq_addr; register volatile u_char *byte_data = (u_char *) sc->sc_nodrq_addr; register int len = count; if (count < ncr_sc->sc_min_dma_len || (sc->sc_options & SBC_PDMA) == 0) return ncr5380_pio_out(ncr_sc, phase, count, data); if (sbc_wait_busy(ncr_sc) == 0) { *ncr_sc->sci_mode |= SCI_MODE_DMA; *ncr_sc->sci_icmd |= SCI_ICMD_DATA; *ncr_sc->sci_dma_send = 0; #define W1 *byte_data = *data++ #define W4 *long_data = *((long*)data)++ while (len >= 64) { if (sbc_ready(ncr_sc)) goto timeout; W1; if (sbc_ready(ncr_sc)) goto timeout; W1; if (sbc_ready(ncr_sc)) goto timeout; W1; if (sbc_ready(ncr_sc)) goto timeout; W1; if (sbc_ready(ncr_sc)) goto timeout; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; len -= 64; } while (len) { if (sbc_ready(ncr_sc)) goto timeout; W1; len--; } #undef W1 #undef W4 if (sbc_wait_dreq(ncr_sc)) printf("%s: timeout waiting for DREQ.\n", ncr_sc->sc_dev.dv_xname); *byte_data = 0; SCI_CLR_INTR(ncr_sc); *ncr_sc->sci_mode &= ~SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; } return count - len; timeout: printf("%s: pdma_out: timeout len=%d count=%d\n", ncr_sc->sc_dev.dv_xname, len, count); if ((*ncr_sc->sci_csr & SCI_CSR_PHASE_MATCH) == 0) { *ncr_sc->sci_icmd &= ~SCI_ICMD_DATA; --len; } SCI_CLR_INTR(ncr_sc); *ncr_sc->sci_mode &= ~SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; return count - len; } static int sbc_pdma_in(ncr_sc, phase, count, data) struct ncr5380_softc *ncr_sc; int phase; int count; u_char *data; { struct sbc_softc *sc = (struct sbc_softc *)ncr_sc; register volatile long *long_data = (long *) sc->sc_drq_addr; register volatile u_char *byte_data = (u_char *) sc->sc_nodrq_addr; register int len = count; if (count < ncr_sc->sc_min_dma_len || (sc->sc_options & SBC_PDMA) == 0) return ncr5380_pio_in(ncr_sc, phase, count, data); if (sbc_wait_busy(ncr_sc) == 0) { *ncr_sc->sci_mode |= SCI_MODE_DMA; *ncr_sc->sci_icmd |= SCI_ICMD_DATA; *ncr_sc->sci_irecv = 0; #define R4 *((long *)data)++ = *long_data #define R1 *data++ = *byte_data while (len >= 1024) { if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 128 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 256 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 384 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 512 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 640 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 768 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 896 */ if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 1024 */ len -= 1024; } while (len >= 128) { if (sbc_ready(ncr_sc)) goto timeout; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 128 */ len -= 128; } while (len) { if (sbc_ready(ncr_sc)) goto timeout; R1; len--; } #undef R4 #undef R1 SCI_CLR_INTR(ncr_sc); *ncr_sc->sci_mode &= ~SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; } return count - len; timeout: printf("%s: pdma_in: timeout len=%d count=%d\n", ncr_sc->sc_dev.dv_xname, len, count); SCI_CLR_INTR(ncr_sc); *ncr_sc->sci_mode &= ~SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; return count - len; } /*** * The following code implements interrupt-driven PDMA. ***/ /* * This is the meat of the PDMA transfer. * When we get here, we shove data as fast as the mac can take it. * We depend on several things: * * All macs after the Mac Plus that have a 5380 chip should have a general * logic IC that handshakes data for blind transfers. * * If the SCSI controller finishes sending/receiving data before we do, * the same general logic IC will generate a /BERR for us in short order. * * The fault address for said /BERR minus the base address for the * transfer will be the amount of data that was actually written. * * We use the nofault flag and the setjmp/longjmp in locore.s so we can * detect and handle the bus error for early termination of a command. * This is usually caused by a disconnecting target. */ void sbc_drq_intr(p) void *p; { extern int *nofault, mac68k_buserr_addr; register struct sbc_softc *sc = (struct sbc_softc *) p; register struct ncr5380_softc *ncr_sc = (struct ncr5380_softc *) p; register struct sci_req *sr = ncr_sc->sc_current; register struct sbc_pdma_handle *dh = sr->sr_dma_hand; label_t faultbuf; volatile u_int32_t *long_drq; u_int32_t *long_data; volatile u_int8_t *drq; u_int8_t *data; register int count; int dcount, resid; #ifdef SBC_WRITE_HACK u_int8_t tmp; #endif /* * If we're not ready to xfer data, or have no more, just return. */ if ((*ncr_sc->sci_csr & SCI_CSR_DREQ) == 0 || dh->dh_len == 0) return; #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_INTR) printf("%s: drq intr, dh_len=0x%x, dh_flags=0x%x\n", ncr_sc->sc_dev.dv_xname, dh->dh_len, dh->dh_flags); #endif /* * Setup for a possible bus error caused by SCSI controller * switching out of DATA-IN/OUT before we're done with the * current transfer. */ nofault = (int *) &faultbuf; if (setjmp((label_t *) nofault)) { nofault = (int *) 0; if ((dh->dh_flags & SBC_DH_DONE) == 0) { count = (( (u_long) mac68k_buserr_addr - (u_long) sc->sc_drq_addr)); if ((count < 0) || (count > dh->dh_len)) { printf("%s: complete=0x%x (pending 0x%x)\n", ncr_sc->sc_dev.dv_xname, count, dh->dh_len); panic("something is wrong"); } dh->dh_addr += count; dh->dh_len -= count; } else count = 0; #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_INTR) printf("%s: drq /berr, complete=0x%x (pending 0x%x)\n", ncr_sc->sc_dev.dv_xname, count, dh->dh_len); #endif mac68k_buserr_addr = 0; return; } if (dh->dh_flags & SBC_DH_OUT) { /* Data Out */ #if notyet /* XXX */ /* * Get the source address aligned. */ resid = count = min(dh->dh_len, 4 - (((int) dh->dh_addr) & 0x3)); if (count && count < 4) { drq = (volatile u_int8_t *) sc->sc_drq_addr; data = (u_int8_t *) dh->dh_addr; #define W1 *drq++ = *data++ while (count) { W1; count--; } #undef W1 dh->dh_addr += resid; dh->dh_len -= resid; } /* * Start the transfer. */ while (dh->dh_len) { dcount = count = min(dh->dh_len, MAX_DMA_LEN); long_drq = (volatile u_int32_t *) sc->sc_drq_addr; long_data = (u_int32_t *) dh->dh_addr; #define W4 *long_drq++ = *long_data++ while (count >= 64) { W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; W4; /* 64 */ count -= 64; } while (count >= 4) { W4; count -= 4; } #undef W4 data = (u_int8_t *) long_data; drq = (u_int8_t *) long_drq; #else /* notyet */ /* * Start the transfer. */ while (dh->dh_len) { dcount = count = min(dh->dh_len, MAX_DMA_LEN); drq = (volatile u_int8_t *) sc->sc_drq_addr; data = (u_int8_t *) dh->dh_addr; #endif /* notyet */ #define W1 *drq++ = *data++ while (count) { W1; count--; } #undef W1 dh->dh_len -= dcount; dh->dh_addr += dcount; } dh->dh_flags |= SBC_DH_DONE; #ifdef SBC_WRITE_HACK /* * XXX -- Read a byte from the SBC to trigger a /BERR. * This seems to be necessary for us to notice that * the target has disconnected. Ick. 06 jun 1996 (sr) */ if (dcount >= MAX_DMA_LEN) { #if 0 while ((*ncr_sc->sci_csr & SCI_CSR_ACK) == 0) ; #endif drq = (volatile u_int8_t *) sc->sc_drq_addr; } tmp = *drq; #endif } else { /* Data In */ /* * Get the dest address aligned. */ resid = count = min(dh->dh_len, 4 - (((int) dh->dh_addr) & 0x3)); if (count && count < 4) { data = (u_int8_t *) dh->dh_addr; drq = (volatile u_int8_t *) sc->sc_drq_addr; #define R1 *data++ = *drq++ while (count) { R1; count--; } #undef R1 dh->dh_addr += resid; dh->dh_len -= resid; } /* * Start the transfer. */ while (dh->dh_len) { dcount = count = min(dh->dh_len, MAX_DMA_LEN); long_data = (u_int32_t *) dh->dh_addr; long_drq = (volatile u_int32_t *) sc->sc_drq_addr; #define R4 *long_data++ = *long_drq++ while (count >= 64) { R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; R4; /* 64 */ count -= 64; } while (count >= 4) { R4; count -= 4; } #undef R4 data = (u_int8_t *) long_data; drq = (volatile u_int8_t *) long_drq; #define R1 *data++ = *drq++ while (count) { R1; count--; } #undef R1 dh->dh_len -= dcount; dh->dh_addr += dcount; } dh->dh_flags |= SBC_DH_DONE; } /* * OK. No bus error occurred above. Clear the nofault flag * so we no longer short-circuit bus errors. */ nofault = (int *) 0; #ifdef SBC_DEBUG if (sbc_debug & (SBC_DB_REG | SBC_DB_INTR)) printf("%s: drq intr complete: csr=0x%x, bus_csr=0x%x\n", ncr_sc->sc_dev.dv_xname, *ncr_sc->sci_csr, *ncr_sc->sci_bus_csr); #endif } void sbc_dma_alloc(ncr_sc) struct ncr5380_softc *ncr_sc; { struct sbc_softc *sc = (struct sbc_softc *) ncr_sc; struct sci_req *sr = ncr_sc->sc_current; struct scsi_xfer *xs = sr->sr_xs; struct sbc_pdma_handle *dh; int i, xlen; #ifdef DIAGNOSTIC if (sr->sr_dma_hand != NULL) panic("sbc_dma_alloc: already have PDMA handle"); #endif /* Polled transfers shouldn't allocate a PDMA handle. */ if (sr->sr_flags & SR_IMMED) return; xlen = ncr_sc->sc_datalen; /* Make sure our caller checked sc_min_dma_len. */ if (xlen < MIN_DMA_LEN) panic("sbc_dma_alloc: len=0x%x\n", xlen); /* * Find free PDMA handle. Guaranteed to find one since we * have as many PDMA handles as the driver has processes. * (instances?) */ for (i = 0; i < SCI_OPENINGS; i++) { if ((sc->sc_pdma[i].dh_flags & SBC_DH_BUSY) == 0) goto found; } panic("sbc: no free PDMA handles"); found: dh = &sc->sc_pdma[i]; dh->dh_flags = SBC_DH_BUSY; dh->dh_addr = ncr_sc->sc_dataptr; dh->dh_len = xlen; /* Copy the 'write' flag for convenience. */ if (xs->flags & SCSI_DATA_OUT) dh->dh_flags |= SBC_DH_OUT; sr->sr_dma_hand = dh; } void sbc_dma_free(ncr_sc) struct ncr5380_softc *ncr_sc; { struct sci_req *sr = ncr_sc->sc_current; struct sbc_pdma_handle *dh = sr->sr_dma_hand; #ifdef DIAGNOSTIC if (sr->sr_dma_hand == NULL) panic("sbc_dma_free: no DMA handle"); #endif if (ncr_sc->sc_state & NCR_DOINGDMA) panic("sbc_dma_free: free while in progress"); if (dh->dh_flags & SBC_DH_BUSY) { dh->dh_flags = 0; dh->dh_addr = NULL; dh->dh_len = 0; } sr->sr_dma_hand = NULL; } void sbc_dma_poll(ncr_sc) struct ncr5380_softc *ncr_sc; { struct sci_req *sr = ncr_sc->sc_current; /* * We shouldn't arrive here; if SR_IMMED is set, then * dma_alloc() should have refused to allocate a handle * for the transfer. This forces the polled PDMA code * to handle the request... */ #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_DMA) printf("%s: lost DRQ interrupt?\n", ncr_sc->sc_dev.dv_xname); #endif sr->sr_flags |= SR_OVERDUE; } void sbc_dma_setup(ncr_sc) struct ncr5380_softc *ncr_sc; { /* Not needed; we don't have real DMA */ } void sbc_dma_start(ncr_sc) struct ncr5380_softc *ncr_sc; { register struct sbc_softc *sc = (struct sbc_softc *) ncr_sc; struct sci_req *sr = ncr_sc->sc_current; struct sbc_pdma_handle *dh = sr->sr_dma_hand; /* * Match bus phase, clear pending interrupts, set DMA mode, and * assert data bus (for writing only), then start the transfer. */ if (dh->dh_flags & SBC_DH_OUT) { *ncr_sc->sci_tcmd = PHASE_DATA_OUT; SCI_CLR_INTR(ncr_sc); *sc->sc_iflag = 0x80 | (V2IF_SCSIIRQ | V2IF_SCSIDRQ); *ncr_sc->sci_mode |= SCI_MODE_DMA; *ncr_sc->sci_icmd = SCI_ICMD_DATA; *ncr_sc->sci_dma_send = 0; } else { *ncr_sc->sci_tcmd = PHASE_DATA_IN; SCI_CLR_INTR(ncr_sc); *sc->sc_iflag = 0x80 | (V2IF_SCSIIRQ | V2IF_SCSIDRQ); *ncr_sc->sci_mode |= SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; *ncr_sc->sci_irecv = 0; } ncr_sc->sc_state |= NCR_DOINGDMA; #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_DMA) printf("%s: PDMA started, va=%p, len=0x%x\n", ncr_sc->sc_dev.dv_xname, dh->dh_addr, dh->dh_len); #endif } void sbc_dma_eop(ncr_sc) struct ncr5380_softc *ncr_sc; { /* Not used; the EOP pin is wired high (GMFH, pp. 389-390) */ } void sbc_dma_stop(ncr_sc) struct ncr5380_softc *ncr_sc; { register struct sbc_softc *sc = (struct sbc_softc *) ncr_sc; struct sci_req *sr = ncr_sc->sc_current; struct sbc_pdma_handle *dh = sr->sr_dma_hand; register int ntrans; if ((ncr_sc->sc_state & NCR_DOINGDMA) == 0) { #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_DMA) printf("%s: dma_stop: DMA not running\n", ncr_sc->sc_dev.dv_xname); #endif return; } ncr_sc->sc_state &= ~NCR_DOINGDMA; if ((ncr_sc->sc_state & NCR_ABORTING) == 0) { ntrans = ncr_sc->sc_datalen - dh->dh_len; #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_DMA) printf("%s: dma_stop: ntrans=0x%x\n", ncr_sc->sc_dev.dv_xname, ntrans); #endif if (ntrans > ncr_sc->sc_datalen) panic("sbc_dma_stop: excess transfer\n"); /* Adjust data pointer */ ncr_sc->sc_dataptr += ntrans; ncr_sc->sc_datalen -= ntrans; /* Clear any pending interrupts. */ SCI_CLR_INTR(ncr_sc); *sc->sc_iflag = 0x80 | V2IF_SCSIIRQ; } /* Put SBIC back into PIO mode. */ *ncr_sc->sci_mode &= ~SCI_MODE_DMA; *ncr_sc->sci_icmd = 0; #ifdef SBC_DEBUG if (sbc_debug & SBC_DB_REG) printf("%s: dma_stop: csr=0x%x, bus_csr=0x%x\n", ncr_sc->sc_dev.dv_xname, *ncr_sc->sci_csr, *ncr_sc->sci_bus_csr); #endif }