/* $NetBSD: wdcvar.h,v 1.55 2004/01/03 23:59:58 thorpej Exp $ */ /*- * Copyright (c) 1998, 2003 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_IC_WDCVAR_H_ #define _DEV_IC_WDCVAR_H_ /* XXX For scsipi_adapter and scsipi_channel. */ #include #include #include #define WAITTIME (10 * hz) /* time to wait for a completion */ /* this is a lot for hard drives, but not for cdroms */ #define WDC_NREG 8 /* number of command registers */ /* * Per-channel data */ struct wdc_channel { struct callout ch_callout; /* callout handle */ int ch_channel; /* location */ struct wdc_softc *ch_wdc; /* controller's softc */ /* Our registers */ bus_space_tag_t cmd_iot; bus_space_handle_t cmd_baseioh; bus_space_handle_t cmd_iohs[WDC_NREG]; bus_space_tag_t ctl_iot; bus_space_handle_t ctl_ioh; /* data32{iot,ioh} are only used for 32 bit data xfers */ bus_space_tag_t data32iot; bus_space_handle_t data32ioh; /* Our state */ int ch_flags; #define WDCF_ACTIVE 0x01 /* channel is active */ #define WDCF_SHUTDOWN 0x02 /* channel is shutting down */ #define WDCF_IRQ_WAIT 0x10 /* controller is waiting for irq */ #define WDCF_DMA_WAIT 0x20 /* controller is waiting for DMA */ #define WDCF_DISABLED 0x80 /* channel is disabled */ #define WDCF_TH_RUN 0x100 /* the kenrel thread is working */ #define WDCF_TH_RESET 0x200 /* someone ask the thread to reset */ u_int8_t ch_status; /* copy of status register */ u_int8_t ch_error; /* copy of error register */ /* per-drive info */ struct ata_drive_datas ch_drive[2]; struct device *atabus; /* self */ /* ATAPI children */ struct device *atapibus; struct scsipi_channel ch_atapi_channel; /* ATA children */ struct device *ata_drives[2]; /* * Channel queues. May be the same for all channels, if hw * channels are not independent. */ struct ata_queue *ch_queue; /* The channel kernel thread */ struct proc *ch_thread; }; /* * Per-controller data */ struct wdc_softc { struct device sc_dev; /* generic device info */ int cap; /* controller capabilities */ #define WDC_CAPABILITY_DATA16 0x0001 /* can do 16-bit data access */ #define WDC_CAPABILITY_DATA32 0x0002 /* can do 32-bit data access */ #define WDC_CAPABILITY_MODE 0x0004 /* controller knows its PIO/DMA modes */ #define WDC_CAPABILITY_DMA 0x0008 /* DMA */ #define WDC_CAPABILITY_UDMA 0x0010 /* Ultra-DMA/33 */ #define WDC_CAPABILITY_HWLOCK 0x0020 /* Needs to lock HW */ #define WDC_CAPABILITY_ATA_NOSTREAM 0x0040 /* Don't use stream funcs on ATA */ #define WDC_CAPABILITY_ATAPI_NOSTREAM 0x0080 /* Don't use stream f on ATAPI */ #define WDC_CAPABILITY_NO_EXTRA_RESETS 0x0100 /* only reset once */ #define WDC_CAPABILITY_PREATA 0x0200 /* ctrl can be a pre-ata one */ #define WDC_CAPABILITY_IRQACK 0x0400 /* callback to ack interrupt */ #define WDC_CAPABILITY_NOIRQ 0x1000 /* Controller never interrupts */ #define WDC_CAPABILITY_SELECT 0x2000 /* Controller selects target */ #define WDC_CAPABILITY_RAID 0x4000 /* Controller "supports" RAID */ u_int8_t PIO_cap; /* highest PIO mode supported */ u_int8_t DMA_cap; /* highest DMA mode supported */ u_int8_t UDMA_cap; /* highest UDMA mode supported */ int nchannels; /* # channels on this controller */ struct wdc_channel **channels; /* channel-specific data (array) */ /* * The reference count here is used for both IDE and ATAPI devices. */ struct atapi_adapter sc_atapi_adapter; /* Function used to probe for drives. */ void (*drv_probe)(struct wdc_channel *); /* if WDC_CAPABILITY_DMA set in 'cap' */ void *dma_arg; int (*dma_init)(void *, int, int, void *, size_t, int); void (*dma_start)(void *, int, int); int (*dma_finish)(void *, int, int, int); /* flags passed to dma_init */ #define WDC_DMA_READ 0x01 #define WDC_DMA_IRQW 0x02 #define WDC_DMA_LBA48 0x04 int dma_status; /* status returned from dma_finish() */ #define WDC_DMAST_NOIRQ 0x01 /* missing IRQ */ #define WDC_DMAST_ERR 0x02 /* DMA error */ #define WDC_DMAST_UNDER 0x04 /* DMA underrun */ /* if WDC_CAPABILITY_HWLOCK set in 'cap' */ int (*claim_hw)(void *, int); void (*free_hw)(void *); /* if WDC_CAPABILITY_MODE set in 'cap' */ void (*set_modes)(struct wdc_channel *); /* if WDC_CAPABILITY_SELECT set in 'cap' */ void (*select)(struct wdc_channel *,int); /* if WDC_CAPABILITY_IRQACK set in 'cap' */ void (*irqack)(struct wdc_channel *); }; /* * Public functions which can be called by ATA or ATAPI specific parts, * or bus-specific backends. */ int wdcprobe(struct wdc_channel *); void wdcattach(struct wdc_channel *); int wdcdetach(struct device *, int); int wdcactivate(struct device *, enum devact); int wdcintr(void *); void wdc_exec_xfer(struct wdc_channel *, struct ata_xfer *); struct ata_xfer *wdc_get_xfer(int); /* int = WDC_NOSLEEP/CANSLEEP */ #define WDC_CANSLEEP 0x00 #define WDC_NOSLEEP 0x01 void wdc_free_xfer (struct wdc_channel *, struct ata_xfer *); void wdcstart(struct wdc_channel *); void wdcrestart(void*); int wdcreset(struct wdc_channel *, int); #define RESET_POLL 1 #define RESET_SLEEP 0 /* wdcreset will use tsleep() */ int wdcwait(struct wdc_channel *, int, int, int, int); #define WDCWAIT_OK 0 /* we have what we asked */ #define WDCWAIT_TOUT -1 /* timed out */ #define WDCWAIT_THR 1 /* return, the kernel thread has been awakened */ int wdc_dmawait(struct wdc_channel *, struct ata_xfer *, int); void wdcbit_bucket( struct wdc_channel *, int); void wdccommand(struct wdc_channel *, u_int8_t, u_int8_t, u_int16_t, u_int8_t, u_int8_t, u_int8_t, u_int8_t); void wdccommandext(struct wdc_channel *, u_int8_t, u_int8_t, u_int64_t, u_int16_t); void wdccommandshort(struct wdc_channel *, int, int); void wdctimeout(void *arg); void wdc_reset_channel(struct ata_drive_datas *, int); int wdc_exec_command(struct ata_drive_datas *, struct wdc_command*); #define WDC_COMPLETE 0x01 #define WDC_QUEUED 0x02 #define WDC_TRY_AGAIN 0x03 int wdc_addref(struct wdc_channel *); void wdc_delref(struct wdc_channel *); void wdc_kill_pending(struct wdc_channel *); void wdc_print_modes (struct wdc_channel *); void wdc_probe_caps(struct ata_drive_datas*); /* * ST506 spec says that if READY or SEEKCMPLT go off, then the read or write * command is aborted. */ #define wdc_wait_for_drq(chp, timeout, flags) \ wdcwait((chp), WDCS_DRQ, WDCS_DRQ, (timeout), (flags)) #define wdc_wait_for_unbusy(chp, timeout, flags) \ wdcwait((chp), 0, 0, (timeout), (flags)) #define wdc_wait_for_ready(chp, timeout, flags) \ wdcwait((chp), WDCS_DRDY, WDCS_DRDY, (timeout), (flags)) /* ATA/ATAPI specs says a device can take 31s to reset */ #define WDC_RESET_WAIT 31000 void wdc_atapibus_attach(struct atabus_softc *); /* XXX */ struct atabus_softc; void atabusconfig(struct atabus_softc *); #endif /* _DEV_IC_WDCVAR_H_ */