/* $NetBSD: refclock_hpgps.c,v 1.1.1.1 2000/03/29 12:38:53 simonb Exp $ */ /* * refclock_hpgps - clock driver for HP 58503A GPS receiver */ #ifdef HAVE_CONFIG_H #include #endif #if defined(REFCLOCK) && defined(CLOCK_HPGPS) #include #include #include #include "ntpd.h" #include "ntp_io.h" #include "ntp_refclock.h" #include "ntp_stdlib.h" /* Version 0.1 April 1, 1995 * 0.2 April 25, 1995 * tolerant of missing timecode response prompt and sends * clear status if prompt indicates error; * can use either local time or UTC from receiver; * can get receiver status screen via flag4 * * WARNING!: This driver is UNDER CONSTRUCTION * Everything in here should be treated with suspicion. * If it looks wrong, it probably is. * * Comments and/or questions to: Dave Vitanye * Hewlett Packard Company * dave@scd.hp.com * (408) 553-2856 * * Thanks to the author of the PST driver, which was the starting point for * this one. * * This driver supports the HP 58503A Time and Frequency Reference Receiver. * This receiver uses HP SmartClock (TM) to implement an Enhanced GPS receiver. * The receiver accuracy when locked to GPS in normal operation is better * than 1 usec. The accuracy when operating in holdover is typically better * than 10 usec. per day. * * The receiver should be operated with factory default settings. * Initial driver operation: expects the receiver to be already locked * to GPS, configured and able to output timecode format 2 messages. * * The driver uses the poll sequence :PTIME:TCODE? to get a response from * the receiver. The receiver responds with a timecode string of ASCII * printing characters, followed by a , followed by a prompt string * issued by the receiver, in the following format: * T#yyyymmddhhmmssMFLRVccscpi > * * The driver processes the response at the and , so what the * driver sees is the prompt from the previous poll, followed by this * timecode. The prompt from the current poll is (usually) left unread until * the next poll. So (except on the very first poll) the driver sees this: * * scpi > T#yyyymmddhhmmssMFLRVcc * * The T is the on-time character, at 980 msec. before the next 1PPS edge. * The # is the timecode format type. We look for format 2. * Without any of the CLK or PPS stuff, then, the receiver buffer timestamp * at the is 24 characters later, which is about 25 msec. at 9600 bps, * so the first approximation for fudge time1 is nominally -0.955 seconds. * This number probably needs adjusting for each machine / OS type, so far: * -0.955000 on an HP 9000 Model 712/80 HP-UX 9.05 * -0.953175 on an HP 9000 Model 370 HP-UX 9.10 * * This receiver also provides a 1PPS signal, but I haven't figured out * how to deal with any of the CLK or PPS stuff yet. Stay tuned. * */ /* * Fudge Factors * * Fudge time1 is used to accomodate the timecode serial interface adjustment. * Fudge flag4 can be set to request a receiver status screen summary, which * is recorded in the clockstats file. */ /* * Interface definitions */ #define DEVICE "/dev/hpgps%d" /* device name and unit */ #define SPEED232 B9600 /* uart speed (9600 baud) */ #define PRECISION (-10) /* precision assumed (about 1 ms) */ #define REFID "GPS\0" /* reference ID */ #define DESCRIPTION "HP 58503A GPS Time and Frequency Reference Receiver" #define SMAX 23*80+1 /* for :SYSTEM:PRINT? status screen response */ #define MTZONE 2 /* number of fields in timezone reply */ #define MTCODET2 12 /* number of fields in timecode format T2 */ #define NTCODET2 21 /* number of chars to checksum in format T2 */ /* * Tables to compute the day of year from yyyymmdd timecode. * Viva la leap. */ static int day1tab[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; static int day2tab[] = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; /* * Unit control structure */ struct hpgpsunit { int pollcnt; /* poll message counter */ int tzhour; /* timezone offset, hours */ int tzminute; /* timezone offset, minutes */ int linecnt; /* set for expected multiple line responses */ char *lastptr; /* pointer to receiver response data */ char statscrn[SMAX]; /* receiver status screen buffer */ }; /* * Function prototypes */ static int hpgps_start P((int, struct peer *)); static void hpgps_shutdown P((int, struct peer *)); static void hpgps_receive P((struct recvbuf *)); static void hpgps_poll P((int, struct peer *)); /* * Transfer vector */ struct refclock refclock_hpgps = { hpgps_start, /* start up driver */ hpgps_shutdown, /* shut down driver */ hpgps_poll, /* transmit poll message */ noentry, /* not used (old hpgps_control) */ noentry, /* initialize driver */ noentry, /* not used (old hpgps_buginfo) */ NOFLAGS /* not used */ }; /* * hpgps_start - open the devices and initialize data for processing */ static int hpgps_start( int unit, struct peer *peer ) { register struct hpgpsunit *up; struct refclockproc *pp; int fd; char device[20]; /* * Open serial port. Use CLK line discipline, if available. */ (void)sprintf(device, DEVICE, unit); if (!(fd = refclock_open(device, SPEED232, LDISC_CLK))) return (0); /* * Allocate and initialize unit structure */ if (!(up = (struct hpgpsunit *) emalloc(sizeof(struct hpgpsunit)))) { (void) close(fd); return (0); } memset((char *)up, 0, sizeof(struct hpgpsunit)); pp = peer->procptr; pp->io.clock_recv = hpgps_receive; pp->io.srcclock = (caddr_t)peer; pp->io.datalen = 0; pp->io.fd = fd; if (!io_addclock(&pp->io)) { (void) close(fd); free(up); return (0); } pp->unitptr = (caddr_t)up; /* * Initialize miscellaneous variables */ peer->precision = PRECISION; pp->clockdesc = DESCRIPTION; memcpy((char *)&pp->refid, REFID, 4); up->tzhour = 0; up->tzminute = 0; *up->statscrn = '\0'; up->lastptr = up->statscrn; up->pollcnt = 2; /* * Get the identifier string, which is logged but otherwise ignored, * and get the local timezone information */ up->linecnt = 1; if (write(pp->io.fd, "*IDN?\r:PTIME:TZONE?\r", 20) != 20) refclock_report(peer, CEVNT_FAULT); return (1); } /* * hpgps_shutdown - shut down the clock */ static void hpgps_shutdown( int unit, struct peer *peer ) { register struct hpgpsunit *up; struct refclockproc *pp; pp = peer->procptr; up = (struct hpgpsunit *)pp->unitptr; io_closeclock(&pp->io); free(up); } /* * hpgps_receive - receive data from the serial interface */ static void hpgps_receive( struct recvbuf *rbufp ) { register struct hpgpsunit *up; struct refclockproc *pp; struct peer *peer; l_fp trtmp; char tcodechar1; /* identifies timecode format */ char tcodechar2; /* identifies timecode format */ char timequal; /* time figure of merit: 0-9 */ char freqqual; /* frequency figure of merit: 0-3 */ char leapchar; /* leapsecond: + or 0 or - */ char servchar; /* request for service: 0 = no, 1 = yes */ char syncchar; /* time info is invalid: 0 = no, 1 = yes */ short expectedsm; /* expected timecode byte checksum */ short tcodechksm; /* computed timecode byte checksum */ int i,m,n; int month, day, lastday; char *tcp; /* timecode pointer (skips over the prompt) */ char prompt[BMAX]; /* prompt in response from receiver */ /* * Initialize pointers and read the receiver response */ peer = (struct peer *)rbufp->recv_srcclock; pp = peer->procptr; up = (struct hpgpsunit *)pp->unitptr; *pp->a_lastcode = '\0'; pp->lencode = refclock_gtlin(rbufp, pp->a_lastcode, BMAX, &trtmp); #ifdef DEBUG if (debug) printf("hpgps: lencode: %d timecode:%s\n", pp->lencode, pp->a_lastcode); #endif /* * If there's no characters in the reply, we can quit now */ if (pp->lencode == 0) return; /* * If linecnt is greater than zero, we are getting information only, * such as the receiver identification string or the receiver status * screen, so put the receiver response at the end of the status * screen buffer. When we have the last line, write the buffer to * the clockstats file and return without further processing. * * If linecnt is zero, we are expecting either the timezone * or a timecode. At this point, also write the response * to the clockstats file, and go on to process the prompt (if any), * timezone, or timecode and timestamp. */ if (up->linecnt-- > 0) { if ((int)(pp->lencode + 2) <= (SMAX - (up->lastptr - up->statscrn))) { *up->lastptr++ = '\n'; (void)strcpy(up->lastptr, pp->a_lastcode); up->lastptr += pp->lencode; } if (up->linecnt == 0) record_clock_stats(&peer->srcadr, up->statscrn); return; } record_clock_stats(&peer->srcadr, pp->a_lastcode); pp->lastrec = trtmp; up->lastptr = up->statscrn; *up->lastptr = '\0'; up->pollcnt = 2; /* * We get down to business: get a prompt if one is there, issue * a clear status command if it contains an error indication. * Next, check for either the timezone reply or the timecode reply * and decode it. If we don't recognize the reply, or don't get the * proper number of decoded fields, or get an out of range timezone, * or if the timecode checksum is bad, then we declare bad format * and exit. * * Timezone format (including nominal prompt): * scpi > -H,-M * * Timecode format (including nominal prompt): * scpi > T2yyyymmddhhmmssMFLRVcc * */ (void)strcpy(prompt,pp->a_lastcode); tcp = strrchr(pp->a_lastcode,'>'); if (tcp == NULL) tcp = pp->a_lastcode; else tcp++; prompt[tcp - pp->a_lastcode] = '\0'; while ((*tcp == ' ') || (*tcp == '\t')) tcp++; /* * deal with an error indication in the prompt here */ if (strrchr(prompt,'E') > strrchr(prompt,'s')){ #ifdef DEBUG if (debug) printf("hpgps: error indicated in prompt: %s\n", prompt); #endif if (write(pp->io.fd, "*CLS\r\r", 6) != 6) refclock_report(peer, CEVNT_FAULT); } /* * make sure we got a timezone or timecode format and * then process accordingly */ m = sscanf(tcp,"%c%c", &tcodechar1, &tcodechar2); if (m != 2){ #ifdef DEBUG if (debug) printf("hpgps: no format indicator\n"); #endif refclock_report(peer, CEVNT_BADREPLY); return; } switch (tcodechar1) { case '+': case '-': m = sscanf(tcp,"%d,%d", &up->tzhour, &up->tzminute); if (m != MTZONE) { #ifdef DEBUG if (debug) printf("hpgps: only %d fields recognized in timezone\n", m); #endif refclock_report(peer, CEVNT_BADREPLY); return; } if ((up->tzhour < -12) || (up->tzhour > 13) || (up->tzminute < -59) || (up->tzminute > 59)){ #ifdef DEBUG if (debug) printf("hpgps: timezone %d, %d out of range\n", up->tzhour, up->tzminute); #endif refclock_report(peer, CEVNT_BADREPLY); return; } return; case 'T': break; default: #ifdef DEBUG if (debug) printf("hpgps: unrecognized reply format %c%c\n", tcodechar1, tcodechar2); #endif refclock_report(peer, CEVNT_BADREPLY); return; } /* end of tcodechar1 switch */ switch (tcodechar2) { case '2': m = sscanf(tcp,"%*c%*c%4d%2d%2d%2d%2d%2d%c%c%c%c%c%2hx", &pp->year, &month, &day, &pp->hour, &pp->minute, &pp->second, &timequal, &freqqual, &leapchar, &servchar, &syncchar, &expectedsm); n = NTCODET2; if (m != MTCODET2){ #ifdef DEBUG if (debug) printf("hpgps: only %d fields recognized in timecode\n", m); #endif refclock_report(peer, CEVNT_BADREPLY); return; } break; default: #ifdef DEBUG if (debug) printf("hpgps: unrecognized timecode format %c%c\n", tcodechar1, tcodechar2); #endif refclock_report(peer, CEVNT_BADREPLY); return; } /* end of tcodechar2 format switch */ /* * Compute and verify the checksum. * Characters are summed starting at tcodechar1, ending at just * before the expected checksum. Bail out if incorrect. */ tcodechksm = 0; while (n-- > 0) tcodechksm += *tcp++; tcodechksm &= 0x00ff; if (tcodechksm != expectedsm) { #ifdef DEBUG if (debug) printf("hpgps: checksum %2hX doesn't match %2hX expected\n", tcodechksm, expectedsm); #endif refclock_report(peer, CEVNT_BADREPLY); return; } /* * Compute the day of year from the yyyymmdd format. */ if (month < 1 || month > 12 || day < 1) { refclock_report(peer, CEVNT_BADTIME); return; } if ( ! isleap_4(pp->year) ) { /* Y2KFixes */ /* not a leap year */ if (day > day1tab[month - 1]) { refclock_report(peer, CEVNT_BADTIME); return; } for (i = 0; i < month - 1; i++) day += day1tab[i]; lastday = 365; } else { /* a leap year */ if (day > day2tab[month - 1]) { refclock_report(peer, CEVNT_BADTIME); return; } for (i = 0; i < month - 1; i++) day += day2tab[i]; lastday = 366; } /* * Deal with the timezone offset here. The receiver timecode is in * local time = UTC + :PTIME:TZONE, so SUBTRACT the timezone values. * For example, Pacific Standard Time is -8 hours , 0 minutes. * Deal with the underflows and overflows. */ pp->minute -= up->tzminute; pp->hour -= up->tzhour; if (pp->minute < 0) { pp->minute += 60; pp->hour--; } if (pp->minute > 59) { pp->minute -= 60; pp->hour++; } if (pp->hour < 0) { pp->hour += 24; day--; if (day < 1) { pp->year--; if ( isleap_4(pp->year) ) /* Y2KFixes */ day = 366; else day = 365; } } if (pp->hour > 23) { pp->hour -= 24; day++; if (day > lastday) { pp->year++; day = 1; } } pp->day = day; /* * Decode the MFLRV indicators. * NEED TO FIGURE OUT how to deal with the request for service, * time quality, and frequency quality indicators some day. */ if (syncchar != '0') { pp->leap = LEAP_NOTINSYNC; } else { switch (leapchar) { case '+': pp->leap = LEAP_ADDSECOND; break; case '0': pp->leap = LEAP_NOWARNING; break; case '-': pp->leap = LEAP_DELSECOND; break; default: #ifdef DEBUG if (debug) printf("hpgps: unrecognized leap indicator: %c\n", leapchar); #endif refclock_report(peer, CEVNT_BADTIME); return; } /* end of leapchar switch */ } /* * Process the new sample in the median filter and determine the * reference clock offset and dispersion. We use lastrec as both * the reference time and receive time in order to avoid being * cute, like setting the reference time later than the receive * time, which may cause a paranoid protocol module to chuck out * the data. */ if (!refclock_process(pp)) { refclock_report(peer, CEVNT_BADTIME); return; } refclock_receive(peer); /* * If CLK_FLAG4 is set, ask for the status screen response. */ if (pp->sloppyclockflag & CLK_FLAG4){ up->linecnt = 22; if (write(pp->io.fd, ":SYSTEM:PRINT?\r", 15) != 15) refclock_report(peer, CEVNT_FAULT); } } /* * hpgps_poll - called by the transmit procedure */ static void hpgps_poll( int unit, struct peer *peer ) { register struct hpgpsunit *up; struct refclockproc *pp; /* * Time to poll the clock. The HP 58503A responds to a * ":PTIME:TCODE?" by returning a timecode in the format specified * above. If nothing is heard from the clock for two polls, * declare a timeout and keep going. */ pp = peer->procptr; up = (struct hpgpsunit *)pp->unitptr; if (up->pollcnt == 0) refclock_report(peer, CEVNT_TIMEOUT); else up->pollcnt--; if (write(pp->io.fd, ":PTIME:TCODE?\r", 14) != 14) { refclock_report(peer, CEVNT_FAULT); } else pp->polls++; } #else int refclock_hpgps_bs; #endif /* REFCLOCK */