/* $NetBSD: adb_direct.c,v 1.43 2000/07/03 08:59:26 scottr Exp $ */ /* From: adb_direct.c 2.02 4/18/97 jpw */ /* * Copyright (C) 1996, 1997 John P. Wittkoski * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by John P. Wittkoski. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code is rather messy, but I don't have time right now * to clean it up as much as I would like. * But it works, so I'm happy. :-) jpw */ /* * TO DO: * - We could reduce the time spent in the adb_intr_* routines * by having them save the incoming and outgoing data directly * in the adbInbound and adbOutbound queues, as it would reduce * the number of times we need to copy the data around. It * would also make the code more readable and easier to follow. * - (Related to above) Use the header part of adbCommand to * reduce the number of copies we have to do of the data. * - (Related to above) Actually implement the adbOutbound queue. * This is fairly easy once you switch all the intr routines * over to using adbCommand structs directly. * - There is a bug in the state machine of adb_intr_cuda * code that causes hangs, especially on 030 machines, probably * because of some timing issues. Because I have been unable to * determine the exact cause of this bug, I used the timeout function * to check for and recover from this condition. If anyone finds * the actual cause of this bug, the calls to timeout and the * adb_cuda_tickle routine can be removed. */ #ifdef __NetBSD__ #include "opt_adb.h" #include #include #include #include #include #include #include #include #include #include /* required for adbvar.h */ #include /* required for IOP support */ #include #include #define printf_intr printf #else /* !__NetBSD__, i.e. Mac OS */ #include "via.h" /* for macos based testing */ /* #define ADB_DEBUG */ /* more verbose for testing */ /* Types of ADB hardware that we support */ #define ADB_HW_UNKNOWN 0x0 /* don't know */ #define ADB_HW_II 0x1 /* Mac II series */ #define ADB_HW_IISI 0x2 /* Mac IIsi series */ #define ADB_HW_PB 0x3 /* PowerBook series */ #define ADB_HW_CUDA 0x4 /* Machines with a Cuda chip */ #endif /* __NetBSD__ */ /* some misc. leftovers */ #define vPB 0x0000 #define vPB3 0x08 #define vPB4 0x10 #define vPB5 0x20 #define vSR_INT 0x04 #define vSR_OUT 0x10 /* the type of ADB action that we are currently preforming */ #define ADB_ACTION_NOTREADY 0x1 /* has not been initialized yet */ #define ADB_ACTION_IDLE 0x2 /* the bus is currently idle */ #define ADB_ACTION_OUT 0x3 /* sending out a command */ #define ADB_ACTION_IN 0x4 /* receiving data */ #define ADB_ACTION_POLLING 0x5 /* polling - II only */ #define ADB_ACTION_RUNNING 0x6 /* running - IOP only */ /* * These describe the state of the ADB bus itself, although they * don't necessarily correspond directly to ADB states. * Note: these are not really used in the IIsi code. */ #define ADB_BUS_UNKNOWN 0x1 /* we don't know yet - all models */ #define ADB_BUS_IDLE 0x2 /* bus is idle - all models */ #define ADB_BUS_CMD 0x3 /* starting a command - II models */ #define ADB_BUS_ODD 0x4 /* the "odd" state - II models */ #define ADB_BUS_EVEN 0x5 /* the "even" state - II models */ #define ADB_BUS_ACTIVE 0x6 /* active state - IIsi models */ #define ADB_BUS_ACK 0x7 /* currently ACKing - IIsi models */ /* * Shortcuts for setting or testing the VIA bit states. * Not all shortcuts are used for every type of ADB hardware. */ #define ADB_SET_STATE_IDLE_II() via_reg(VIA1, vBufB) |= (vPB4 | vPB5) #define ADB_SET_STATE_IDLE_IISI() via_reg(VIA1, vBufB) &= ~(vPB4 | vPB5) #define ADB_SET_STATE_IDLE_CUDA() via_reg(VIA1, vBufB) |= (vPB4 | vPB5) #define ADB_SET_STATE_CMD() via_reg(VIA1, vBufB) &= ~(vPB4 | vPB5) #define ADB_SET_STATE_EVEN() via_reg(VIA1, vBufB) = ((via_reg(VIA1, \ vBufB) | vPB4) & ~vPB5) #define ADB_SET_STATE_ODD() via_reg(VIA1, vBufB) = ((via_reg(VIA1, \ vBufB) | vPB5) & ~vPB4) #define ADB_SET_STATE_ACTIVE() via_reg(VIA1, vBufB) |= vPB5 #define ADB_SET_STATE_INACTIVE() via_reg(VIA1, vBufB) &= ~vPB5 #define ADB_SET_STATE_TIP() via_reg(VIA1, vBufB) &= ~vPB5 #define ADB_CLR_STATE_TIP() via_reg(VIA1, vBufB) |= vPB5 #define ADB_SET_STATE_ACKON() via_reg(VIA1, vBufB) |= vPB4 #define ADB_SET_STATE_ACKOFF() via_reg(VIA1, vBufB) &= ~vPB4 #define ADB_TOGGLE_STATE_ACK_CUDA() via_reg(VIA1, vBufB) ^= vPB4 #define ADB_SET_STATE_ACKON_CUDA() via_reg(VIA1, vBufB) &= ~vPB4 #define ADB_SET_STATE_ACKOFF_CUDA() via_reg(VIA1, vBufB) |= vPB4 #define ADB_SET_SR_INPUT() via_reg(VIA1, vACR) &= ~vSR_OUT #define ADB_SET_SR_OUTPUT() via_reg(VIA1, vACR) |= vSR_OUT #define ADB_SR() via_reg(VIA1, vSR) #define ADB_VIA_INTR_ENABLE() via_reg(VIA1, vIER) = 0x84 #define ADB_VIA_INTR_DISABLE() via_reg(VIA1, vIER) = 0x04 #define ADB_VIA_CLR_INTR() via_reg(VIA1, vIFR) = 0x04 #define ADB_INTR_IS_OFF (vPB3 == (via_reg(VIA1, vBufB) & vPB3)) #define ADB_INTR_IS_ON (0 == (via_reg(VIA1, vBufB) & vPB3)) #define ADB_SR_INTR_IS_OFF (0 == (via_reg(VIA1, vIFR) & vSR_INT)) #define ADB_SR_INTR_IS_ON (vSR_INT == (via_reg(VIA1, \ vIFR) & vSR_INT)) /* * This is the delay that is required (in uS) between certain * ADB transactions. The actual timing delay for for each uS is * calculated at boot time to account for differences in machine speed. */ #define ADB_DELAY 150 /* * Maximum ADB message length; includes space for data, result, and * device code - plus a little for safety. */ #define ADB_MAX_MSG_LENGTH 16 #define ADB_MAX_HDR_LENGTH 8 #define ADB_QUEUE 32 #define ADB_TICKLE_TICKS 4 /* * A structure for storing information about each ADB device. */ struct ADBDevEntry { void (*ServiceRtPtr) __P((void)); void *DataAreaAddr; int devType; int origAddr; int currentAddr; }; /* * Used to hold ADB commands that are waiting to be sent out. */ struct adbCmdHoldEntry { u_char outBuf[ADB_MAX_MSG_LENGTH]; /* our message */ u_char *saveBuf; /* buffer to know where to save result */ u_char *compRout; /* completion routine pointer */ u_char *data; /* completion routine data pointer */ }; /* * Eventually used for two separate queues, the queue between * the upper and lower halves, and the outgoing packet queue. * TO DO: adbCommand can replace all of adbCmdHoldEntry eventually */ struct adbCommand { u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */ u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */ u_char *saveBuf; /* where to save result */ u_char *compRout; /* completion routine pointer */ u_char *compData; /* completion routine data pointer */ u_int cmd; /* the original command for this data */ u_int unsol; /* 1 if packet was unsolicited */ u_int ack_only; /* 1 for no special processing */ }; /* * Text representations of each hardware class */ char *adbHardwareDescr[MAX_ADB_HW + 1] = { "unknown", "II series", "IIsi series", "PowerBook", "Cuda", "IOP", }; /* * A few variables that we need and their initial values. */ int adbHardware = ADB_HW_UNKNOWN; int adbActionState = ADB_ACTION_NOTREADY; int adbBusState = ADB_BUS_UNKNOWN; int adbWaiting = 0; /* waiting for return data from the device */ int adbWriteDelay = 0; /* working on (or waiting to do) a write */ int adbOutQueueHasData = 0; /* something in the queue waiting to go out */ int adbNextEnd = 0; /* the next incoming bute is the last (II) */ int adbSoftPower = 0; /* machine supports soft power */ int adbWaitingCmd = 0; /* ADB command we are waiting for */ u_char *adbBuffer = (long)0; /* pointer to user data area */ void *adbCompRout = (long)0; /* pointer to the completion routine */ void *adbCompData = (long)0; /* pointer to the completion routine data */ long adbFakeInts = 0; /* keeps track of fake ADB interrupts for * timeouts (II) */ int adbStarting = 1; /* doing ADBReInit so do polling differently */ int adbSendTalk = 0; /* the intr routine is sending the talk, not * the user (II) */ int adbPolling = 0; /* we are polling for service request */ int adbPollCmd = 0; /* the last poll command we sent */ u_char adbInputBuffer[ADB_MAX_MSG_LENGTH]; /* data input buffer */ u_char adbOutputBuffer[ADB_MAX_MSG_LENGTH]; /* data output buffer */ struct adbCmdHoldEntry adbOutQueue; /* our 1 entry output queue */ int adbSentChars = 0; /* how many characters we have sent */ int adbLastDevice = 0; /* last ADB dev we heard from (II ONLY) */ int adbLastDevIndex = 0; /* last ADB dev loc in dev table (II ONLY) */ int adbLastCommand = 0; /* the last ADB command we sent (II) */ struct ADBDevEntry ADBDevTable[16]; /* our ADB device table */ int ADBNumDevices; /* num. of ADB devices found with ADBReInit */ struct adbCommand adbInbound[ADB_QUEUE]; /* incoming queue */ volatile int adbInCount = 0; /* how many packets in in queue */ int adbInHead = 0; /* head of in queue */ int adbInTail = 0; /* tail of in queue */ struct adbCommand adbOutbound[ADB_QUEUE]; /* outgoing queue - not used yet */ int adbOutCount = 0; /* how many packets in out queue */ int adbOutHead = 0; /* head of out queue */ int adbOutTail = 0; /* tail of out queue */ int tickle_count = 0; /* how many tickles seen for this packet? */ int tickle_serial = 0; /* the last packet tickled */ int adb_cuda_serial = 0; /* the current packet */ struct callout adb_cuda_tickle_ch = CALLOUT_INITIALIZER; extern struct mac68k_machine_S mac68k_machine; void pm_setup_adb __P((void)); void pm_hw_setup __P((void)); void pm_check_adb_devices __P((int)); void pm_intr __P((void *)); int pm_adb_op __P((u_char *, void *, void *, int)); void pm_init_adb_device __P((void)); /* * The following are private routines. */ #ifdef ADB_DEBUG void print_single __P((u_char *)); #endif void adb_intr __P((void *)); void adb_intr_II __P((void *)); void adb_intr_IIsi __P((void *)); void adb_intr_cuda __P((void *)); void adb_soft_intr __P((void)); int send_adb_II __P((u_char *, u_char *, void *, void *, int)); int send_adb_IIsi __P((u_char *, u_char *, void *, void *, int)); int send_adb_cuda __P((u_char *, u_char *, void *, void *, int)); void adb_intr_cuda_test __P((void)); void adb_cuda_tickle __P((void)); void adb_pass_up __P((struct adbCommand *)); void adb_op_comprout __P((void)); void adb_reinit __P((void)); int count_adbs __P((void)); int get_ind_adb_info __P((ADBDataBlock *, int)); int get_adb_info __P((ADBDataBlock *, int)); int set_adb_info __P((ADBSetInfoBlock *, int)); void adb_setup_hw_type __P((void)); int adb_op __P((Ptr, Ptr, Ptr, short)); void adb_read_II __P((u_char *)); void adb_hw_setup __P((void)); void adb_hw_setup_IIsi __P((u_char *)); void adb_comp_exec __P((void)); int adb_cmd_result __P((u_char *)); int adb_cmd_extra __P((u_char *)); int adb_guess_next_device __P((void)); int adb_prog_switch_enable __P((void)); int adb_prog_switch_disable __P((void)); /* we should create this and it will be the public version */ int send_adb __P((u_char *, void *, void *)); void adb_iop_recv __P((IOP *, struct iop_msg *)); int send_adb_iop __P((int, u_char *, void *, void *)); #ifdef ADB_DEBUG /* * print_single * Diagnostic display routine. Displays the hex values of the * specified elements of the u_char. The length of the "string" * is in [0]. */ void print_single(str) u_char *str; { int x; if (str == 0) { printf_intr("no data - null pointer\n"); return; } if (*str == 0) { printf_intr("nothing returned\n"); return; } if (*str > 20) { printf_intr("ADB: ACK > 20 no way!\n"); *str = (u_char)20; } printf_intr("(length=0x%x):", (u_int)*str); for (x = 1; x <= *str; x++) printf_intr(" 0x%02x", (u_int)*(str + x)); printf_intr("\n"); } #endif void adb_cuda_tickle(void) { volatile int s; if (adbActionState == ADB_ACTION_IN) { if (tickle_serial == adb_cuda_serial) { if (++tickle_count > 0) { s = splhigh(); adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; ADB_SET_STATE_IDLE_CUDA(); splx(s); } } else { tickle_serial = adb_cuda_serial; tickle_count = 0; } } else { tickle_serial = adb_cuda_serial; tickle_count = 0; } callout_reset(&adb_cuda_tickle_ch, ADB_TICKLE_TICKS, (void *)adb_cuda_tickle, NULL); } /* * called when when an adb interrupt happens * * Cuda version of adb_intr * TO DO: do we want to add some calls to intr_dispatch() here to * grab serial interrupts? */ void adb_intr_cuda(void *arg) { volatile int i, ending; volatile unsigned int s; struct adbCommand packet; s = splhigh(); /* can't be too careful - might be called */ /* from a routine, NOT an interrupt */ ADB_VIA_CLR_INTR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ switch_start: switch (adbActionState) { case ADB_ACTION_IDLE: /* * This is an unexpected packet, so grab the first (dummy) * byte, set up the proper vars, and tell the chip we are * starting to receive the packet by setting the TIP bit. */ adbInputBuffer[1] = ADB_SR(); adb_cuda_serial++; if (ADB_INTR_IS_OFF) /* must have been a fake start */ break; ADB_SET_SR_INPUT(); ADB_SET_STATE_TIP(); adbInputBuffer[0] = 1; adbActionState = ADB_ACTION_IN; #ifdef ADB_DEBUG if (adb_debug) printf_intr("idle 0x%02x ", adbInputBuffer[1]); #endif break; case ADB_ACTION_IN: adbInputBuffer[++adbInputBuffer[0]] = ADB_SR(); /* intr off means this is the last byte (end of frame) */ if (ADB_INTR_IS_OFF) ending = 1; else ending = 0; if (1 == ending) { /* end of message? */ #ifdef ADB_DEBUG if (adb_debug) { printf_intr("in end 0x%02x ", adbInputBuffer[adbInputBuffer[0]]); print_single(adbInputBuffer); } #endif /* * Are we waiting AND does this packet match what we * are waiting for AND is it coming from either the * ADB or RTC/PRAM sub-device? This section _should_ * recognize all ADB and RTC/PRAM type commands, but * there may be more... NOTE: commands are always at * [4], even for RTC/PRAM commands. */ /* set up data for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); if ((adbWaiting == 1) && (adbInputBuffer[4] == adbWaitingCmd) && ((adbInputBuffer[2] == 0x00) || (adbInputBuffer[2] == 0x01))) { packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.unsol = 0; packet.ack_only = 0; adb_pass_up(&packet); adbWaitingCmd = 0; /* reset "waiting" vars */ adbWaiting = 0; adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; } else { packet.unsol = 1; packet.ack_only = 0; adb_pass_up(&packet); } /* reset vars and signal the end of this frame */ adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; ADB_SET_STATE_IDLE_CUDA(); /*ADB_SET_SR_INPUT();*/ /* * If there is something waiting to be sent out, * the set everything up and send the first byte. */ if (adbWriteDelay == 1) { delay(ADB_DELAY); /* required */ adbSentChars = 0; adbActionState = ADB_ACTION_OUT; /* * If the interrupt is on, we were too slow * and the chip has already started to send * something to us, so back out of the write * and start a read cycle. */ if (ADB_INTR_IS_ON) { ADB_SET_SR_INPUT(); ADB_SET_STATE_IDLE_CUDA(); adbSentChars = 0; adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; break; } /* * If we got here, it's ok to start sending * so load the first byte and tell the chip * we want to send. */ ADB_SET_STATE_TIP(); ADB_SET_SR_OUTPUT(); ADB_SR() = adbOutputBuffer[adbSentChars + 1]; } } else { ADB_TOGGLE_STATE_ACK_CUDA(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("in 0x%02x ", adbInputBuffer[adbInputBuffer[0]]); #endif } break; case ADB_ACTION_OUT: i = ADB_SR(); /* reset SR-intr in IFR */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr out 0x%02x ", i); #endif adbSentChars++; if (ADB_INTR_IS_ON) { /* ADB intr low during write */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr was on "); #endif ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ ADB_SET_STATE_IDLE_CUDA(); adbSentChars = 0; /* must start all over */ adbActionState = ADB_ACTION_IDLE; /* new state */ adbInputBuffer[0] = 0; adbWriteDelay = 1; /* must retry when done with * read */ delay(ADB_DELAY); goto switch_start; /* process next state right * now */ break; } if (adbOutputBuffer[0] == adbSentChars) { /* check for done */ if (0 == adb_cmd_result(adbOutputBuffer)) { /* do we expect data * back? */ adbWaiting = 1; /* signal waiting for return */ adbWaitingCmd = adbOutputBuffer[2]; /* save waiting command */ } else { /* no talk, so done */ /* set up stuff for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.cmd = adbWaitingCmd; packet.unsol = 0; packet.ack_only = 1; adb_pass_up(&packet); /* reset "waiting" vars, just in case */ adbWaitingCmd = 0; adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; } adbWriteDelay = 0; /* done writing */ adbActionState = ADB_ACTION_IDLE; /* signal bus is idle */ ADB_SET_SR_INPUT(); ADB_SET_STATE_IDLE_CUDA(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("write done "); #endif } else { ADB_SR() = adbOutputBuffer[adbSentChars + 1]; /* send next byte */ ADB_TOGGLE_STATE_ACK_CUDA(); /* signal byte ready to * shift */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("toggle "); #endif } break; case ADB_ACTION_NOTREADY: #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: not yet initialized\n"); #endif break; default: #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr: unknown ADB state\n"); #endif } ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ splx(s); /* restore */ return; } /* end adb_intr_cuda */ int send_adb_cuda(u_char * in, u_char * buffer, void *compRout, void *data, int command) { int s, len; #ifdef ADB_DEBUG if (adb_debug) printf_intr("SEND\n"); #endif if (adbActionState == ADB_ACTION_NOTREADY) return 1; /* Don't interrupt while we are messing with the ADB */ s = splhigh(); if ((adbActionState == ADB_ACTION_IDLE) && /* ADB available? */ (ADB_INTR_IS_OFF)) { /* and no incoming interrupt? */ } else if (adbWriteDelay == 0) /* it's busy, but is anything waiting? */ adbWriteDelay = 1; /* if no, then we'll "queue" * it up */ else { splx(s); return 1; /* really busy! */ } #ifdef ADB_DEBUG if (adb_debug) printf_intr("QUEUE\n"); #endif if ((long)in == (long)0) { /* need to convert? */ /* * Don't need to use adb_cmd_extra here because this section * will be called ONLY when it is an ADB command (no RTC or * PRAM) */ if ((command & 0x0c) == 0x08) /* copy addl data ONLY if * doing a listen! */ len = buffer[0]; /* length of additional data */ else len = 0;/* no additional data */ adbOutputBuffer[0] = 2 + len; /* dev. type + command + addl. * data */ adbOutputBuffer[1] = 0x00; /* mark as an ADB command */ adbOutputBuffer[2] = (u_char)command; /* load command */ /* copy additional output data, if any */ memcpy(adbOutputBuffer + 3, buffer + 1, len); } else /* if data ready, just copy over */ memcpy(adbOutputBuffer, in, in[0] + 2); adbSentChars = 0; /* nothing sent yet */ adbBuffer = buffer; /* save buffer to know where to save result */ adbCompRout = compRout; /* save completion routine pointer */ adbCompData = data; /* save completion routine data pointer */ adbWaitingCmd = adbOutputBuffer[2]; /* save wait command */ if (adbWriteDelay != 1) { /* start command now? */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("out start NOW"); #endif delay(ADB_DELAY); adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[adbSentChars + 1]; /* load byte for output */ ADB_SET_STATE_ACKOFF_CUDA(); ADB_SET_STATE_TIP(); /* tell ADB that we want to send */ } adbWriteDelay = 1; /* something in the write "queue" */ splx(s); if (0x0100 <= (s & 0x0700)) /* were VIA1 interrupts blocked? */ /* poll until byte done */ while ((adbActionState != ADB_ACTION_IDLE) || (ADB_INTR_IS_ON) || (adbWaiting == 1)) if (ADB_SR_INTR_IS_ON) { /* wait for "interrupt" */ adb_intr_cuda(NULL); /* go process it */ if (adb_polling) adb_soft_intr(); } return 0; } /* send_adb_cuda */ void adb_intr_II(void *arg) { struct adbCommand packet; int i, intr_on = 0; int send = 0; unsigned int s; s = splhigh(); /* can't be too careful - might be called */ /* from a routine, NOT an interrupt */ ADB_VIA_CLR_INTR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ delay(ADB_DELAY); /* yuck (don't remove) */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ if (ADB_INTR_IS_ON) intr_on = 1; /* save for later */ switch_start: switch (adbActionState) { case ADB_ACTION_POLLING: if (!intr_on) { if (adbOutQueueHasData) { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("POLL-doing-out-queue. "); #endif ADB_SET_STATE_IDLE_II(); delay(ADB_DELAY); /* copy over data */ memcpy(adbOutputBuffer, adbOutQueue.outBuf, adbOutQueue.outBuf[0] + 2); adbBuffer = adbOutQueue.saveBuf; /* user data area */ adbCompRout = adbOutQueue.compRout; /* completion routine */ adbCompData = adbOutQueue.data; /* comp. rout. data */ adbOutQueueHasData = 0; /* currently processing * "queue" entry */ adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to send */ break; } else { #ifdef ADB_DEBUG if (adb_debug) printf_intr("pIDLE "); #endif adbActionState = ADB_ACTION_IDLE; } } else { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("pIN "); #endif adbActionState = ADB_ACTION_IN; } delay(ADB_DELAY); (void)intr_dispatch(0x70); /* grab any serial interrupts */ goto switch_start; break; case ADB_ACTION_IDLE: if (!intr_on) { i = ADB_SR(); adbBusState = ADB_BUS_IDLE; adbActionState = ADB_ACTION_IDLE; ADB_SET_STATE_IDLE_II(); break; } adbInputBuffer[0] = 1; adbInputBuffer[1] = ADB_SR(); /* get first byte */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("idle 0x%02x ", adbInputBuffer[1]); #endif ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ adbActionState = ADB_ACTION_IN; /* set next state */ ADB_SET_STATE_EVEN(); /* set bus state to even */ adbBusState = ADB_BUS_EVEN; break; case ADB_ACTION_IN: adbInputBuffer[++adbInputBuffer[0]] = ADB_SR(); /* get byte */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("in 0x%02x ", adbInputBuffer[adbInputBuffer[0]]); #endif ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ if (intr_on) { /* process last byte of packet */ adbInputBuffer[0]--; /* minus one */ /* * If intr_on was true, and it's the second byte, then * the byte we just discarded is really valid, so * adjust the count */ if (adbInputBuffer[0] == 2) { adbInputBuffer[0]++; } #ifdef ADB_DEBUG if (adb_debug & 0x80) { printf_intr("done: "); print_single(adbInputBuffer); } #endif adbLastDevice = ADB_CMDADDR(adbInputBuffer[1]); if (adbInputBuffer[0] == 1 && !adbWaiting) { /* SRQ!!!*/ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr(" xSRQ! "); #endif adb_guess_next_device(); #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("try 0x%0x ", adbLastDevice); #endif adbOutputBuffer[0] = 1; adbOutputBuffer[1] = ADBTALK(adbLastDevice, 0); adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_POLLING; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to */ break; } /* set up data for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); if (!adbWaiting && (adbInputBuffer[0] != 0)) { packet.unsol = 1; packet.ack_only = 0; adb_pass_up(&packet); } else { packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.unsol = 0; packet.ack_only = 0; adb_pass_up(&packet); } adbWaiting = 0; adbInputBuffer[0] = 0; adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; /* * Since we are done, check whether there is any data * waiting to do out. If so, start the sending the data. */ if (adbOutQueueHasData == 1) { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("XXX: DOING OUT QUEUE\n"); #endif /* copy over data */ memcpy(adbOutputBuffer, adbOutQueue.outBuf, adbOutQueue.outBuf[0] + 2); adbBuffer = adbOutQueue.saveBuf; /* user data area */ adbCompRout = adbOutQueue.compRout; /* completion routine */ adbCompData = adbOutQueue.data; /* comp. rout. data */ adbOutQueueHasData = 0; /* currently processing * "queue" entry */ send = 1; } else { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("XXending "); #endif adb_guess_next_device(); adbOutputBuffer[0] = 1; adbOutputBuffer[1] = ((adbLastDevice & 0x0f) << 4) | 0x0c; adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_POLLING; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to */ break; } } /* * If send is true then something above determined that * the message has ended and we need to start sending out * a new message immediately. This could be because there * is data waiting to go out or because an SRQ was seen. */ if (send) { adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to * send */ break; } /* We only get this far if the message hasn't ended yet. */ switch (adbBusState) { /* set to next state */ case ADB_BUS_EVEN: ADB_SET_STATE_ODD(); /* set state to odd */ adbBusState = ADB_BUS_ODD; break; case ADB_BUS_ODD: ADB_SET_STATE_EVEN(); /* set state to even */ adbBusState = ADB_BUS_EVEN; break; default: printf_intr("strange state!!!\n"); /* huh? */ break; } break; case ADB_ACTION_OUT: i = ADB_SR(); /* clear interrupt */ adbSentChars++; /* * If the outgoing data was a TALK, we must * switch to input mode to get the result. */ if ((adbOutputBuffer[1] & 0x0c) == 0x0c) { adbInputBuffer[0] = 1; adbInputBuffer[1] = i; adbActionState = ADB_ACTION_IN; ADB_SET_SR_INPUT(); adbBusState = ADB_BUS_EVEN; ADB_SET_STATE_EVEN(); #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("talk out 0x%02x ", i); #endif /* we want something back */ adbWaiting = 1; break; } /* * If it's not a TALK, check whether all data has been sent. * If so, call the completion routine and clean up. If not, * advance to the next state. */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("non-talk out 0x%0x ", i); #endif ADB_SET_SR_OUTPUT(); if (adbOutputBuffer[0] == adbSentChars) { /* check for done */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("done \n"); #endif /* set up stuff for adb_pass_up */ memcpy(packet.data, adbOutputBuffer, adbOutputBuffer[0] + 1); packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.cmd = adbWaitingCmd; packet.unsol = 0; packet.ack_only = 1; adb_pass_up(&packet); /* reset "waiting" vars, just in case */ adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; if (adbOutQueueHasData == 1) { /* copy over data */ memcpy(adbOutputBuffer, adbOutQueue.outBuf, adbOutQueue.outBuf[0] + 2); adbBuffer = adbOutQueue.saveBuf; /* user data area */ adbCompRout = adbOutQueue.compRout; /* completion routine */ adbCompData = adbOutQueue.data; /* comp. rout. data */ adbOutQueueHasData = 0; /* currently processing * "queue" entry */ adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to * send */ break; } else { /* send talk to last device instead */ adbOutputBuffer[0] = 1; adbOutputBuffer[1] = ADBTALK(ADB_CMDADDR(adbOutputBuffer[1]), 0); adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_IDLE; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[1]; /* load byte for output */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_STATE_CMD(); /* tell ADB that we want to */ break; } } ADB_SR() = adbOutputBuffer[adbSentChars + 1]; switch (adbBusState) { /* advance to next state */ case ADB_BUS_EVEN: ADB_SET_STATE_ODD(); /* set state to odd */ adbBusState = ADB_BUS_ODD; break; case ADB_BUS_CMD: case ADB_BUS_ODD: ADB_SET_STATE_EVEN(); /* set state to even */ adbBusState = ADB_BUS_EVEN; break; default: #ifdef ADB_DEBUG if (adb_debug) { printf_intr("strange state!!! (0x%x)\n", adbBusState); } #endif break; } break; default: #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: unknown ADB state (during intr)\n"); #endif } ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ splx(s); /* restore */ return; } /* * send_adb version for II series machines */ int send_adb_II(u_char * in, u_char * buffer, void *compRout, void *data, int command) { int s, len; if (adbActionState == ADB_ACTION_NOTREADY) /* return if ADB not * available */ return 1; /* Don't interrupt while we are messing with the ADB */ s = splhigh(); if (0 != adbOutQueueHasData) { /* right now, "has data" means "full" */ splx(s); /* sorry, try again later */ return 1; } if ((long)in == (long)0) { /* need to convert? */ /* * Don't need to use adb_cmd_extra here because this section * will be called ONLY when it is an ADB command (no RTC or * PRAM), especially on II series! */ if ((command & 0x0c) == 0x08) /* copy addl data ONLY if * doing a listen! */ len = buffer[0]; /* length of additional data */ else len = 0;/* no additional data */ adbOutQueue.outBuf[0] = 1 + len; /* command + addl. data */ adbOutQueue.outBuf[1] = (u_char)command; /* load command */ /* copy additional output data, if any */ memcpy(adbOutQueue.outBuf + 2, buffer + 1, len); } else /* if data ready, just copy over */ memcpy(adbOutQueue.outBuf, in, in[0] + 2); adbOutQueue.saveBuf = buffer; /* save buffer to know where to save * result */ adbOutQueue.compRout = compRout; /* save completion routine * pointer */ adbOutQueue.data = data;/* save completion routine data pointer */ if ((adbActionState == ADB_ACTION_IDLE) && /* is ADB available? */ (ADB_INTR_IS_OFF)) { /* and no incoming interrupts? */ /* then start command now */ memcpy(adbOutputBuffer, adbOutQueue.outBuf, adbOutQueue.outBuf[0] + 2); /* copy over data */ adbBuffer = adbOutQueue.saveBuf; /* pointer to user data * area */ adbCompRout = adbOutQueue.compRout; /* pointer to the * completion routine */ adbCompData = adbOutQueue.data; /* pointer to the completion * routine data */ adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_OUT; /* set next state */ adbBusState = ADB_BUS_CMD; /* set bus to cmd state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[adbSentChars + 1]; /* load byte for output */ ADB_SET_STATE_CMD(); /* tell ADB that we want to send */ adbOutQueueHasData = 0; /* currently processing "queue" entry */ } else adbOutQueueHasData = 1; /* something in the write "queue" */ splx(s); if (0x0100 <= (s & 0x0700)) /* were VIA1 interrupts blocked? */ /* poll until message done */ while ((adbActionState != ADB_ACTION_IDLE) || (ADB_INTR_IS_ON) || (adbWaiting == 1)) if (ADB_SR_INTR_IS_ON) { /* wait for "interrupt" */ adb_intr_II(NULL); /* go process it */ if (adb_polling) adb_soft_intr(); } return 0; } /* * This routine is called from the II series interrupt routine * to determine what the "next" device is that should be polled. */ int adb_guess_next_device(void) { int last, i, dummy; if (adbStarting) { /* * Start polling EVERY device, since we can't be sure there is * anything in the device table yet */ if (adbLastDevice < 1 || adbLastDevice > 15) adbLastDevice = 1; if (++adbLastDevice > 15) /* point to next one */ adbLastDevice = 1; } else { /* find the next device using the device table */ if (adbLastDevice < 1 || adbLastDevice > 15) /* let's be parinoid */ adbLastDevice = 2; last = 1; /* default index location */ for (i = 1; i < 16; i++) /* find index entry */ if (ADBDevTable[i].currentAddr == adbLastDevice) { /* look for device */ last = i; /* found it */ break; } dummy = last; /* index to start at */ for (;;) { /* find next device in index */ if (++dummy > 15) /* wrap around if needed */ dummy = 1; if (dummy == last) { /* didn't find any other * device! This can happen if * there are no devices on the * bus */ dummy = 1; break; } /* found the next device */ if (ADBDevTable[dummy].devType != 0) break; } adbLastDevice = ADBDevTable[dummy].currentAddr; } return adbLastDevice; } /* * Called when when an adb interrupt happens. * This routine simply transfers control over to the appropriate * code for the machine we are running on. */ void adb_intr(void *arg) { switch (adbHardware) { case ADB_HW_II: adb_intr_II(arg); break; case ADB_HW_IISI: adb_intr_IIsi(arg); break; case ADB_HW_PB: /* Should not come through here. */ break; case ADB_HW_CUDA: adb_intr_cuda(arg); break; case ADB_HW_IOP: /* Should not come through here. */ break; case ADB_HW_UNKNOWN: break; } } /* * called when when an adb interrupt happens * * IIsi version of adb_intr * */ void adb_intr_IIsi(void *arg) { struct adbCommand packet; int i, ending; unsigned int s; s = splhigh(); /* can't be too careful - might be called */ /* from a routine, NOT an interrupt */ ADB_VIA_CLR_INTR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ switch_start: switch (adbActionState) { case ADB_ACTION_IDLE: delay(ADB_DELAY); /* short delay is required before the * first byte */ ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ ADB_SET_STATE_ACTIVE(); /* signal start of data frame */ adbInputBuffer[1] = ADB_SR(); /* get byte */ adbInputBuffer[0] = 1; adbActionState = ADB_ACTION_IN; /* set next state */ ADB_SET_STATE_ACKON(); /* start ACK to ADB chip */ delay(ADB_DELAY); /* delay */ ADB_SET_STATE_ACKOFF(); /* end ACK to ADB chip */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ break; case ADB_ACTION_IN: ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ adbInputBuffer[++adbInputBuffer[0]] = ADB_SR(); /* get byte */ if (ADB_INTR_IS_OFF) /* check for end of frame */ ending = 1; else ending = 0; ADB_SET_STATE_ACKON(); /* start ACK to ADB chip */ delay(ADB_DELAY); /* delay */ ADB_SET_STATE_ACKOFF(); /* end ACK to ADB chip */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ if (1 == ending) { /* end of message? */ ADB_SET_STATE_INACTIVE(); /* signal end of frame */ /* * This section _should_ handle all ADB and RTC/PRAM * type commands, but there may be more... Note: * commands are always at [4], even for rtc/pram * commands */ /* set up data for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); if ((adbWaiting == 1) && /* are we waiting AND */ (adbInputBuffer[4] == adbWaitingCmd) && /* the cmd we sent AND */ ((adbInputBuffer[2] == 0x00) || /* it's from the ADB * device OR */ (adbInputBuffer[2] == 0x01))) { /* it's from the * PRAM/RTC device */ packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.unsol = 0; packet.ack_only = 0; adb_pass_up(&packet); adbWaitingCmd = 0; /* reset "waiting" vars */ adbWaiting = 0; adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; } else { packet.unsol = 1; packet.ack_only = 0; adb_pass_up(&packet); } adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; /* reset length */ if (adbWriteDelay == 1) { /* were we waiting to * write? */ adbSentChars = 0; /* nothing sent yet */ adbActionState = ADB_ACTION_OUT; /* set next state */ delay(ADB_DELAY); /* delay */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ if (ADB_INTR_IS_ON) { /* ADB intr low during * write */ ADB_SET_STATE_IDLE_IISI(); /* reset */ ADB_SET_SR_INPUT(); /* make sure SR is set * to IN */ adbSentChars = 0; /* must start all over */ adbActionState = ADB_ACTION_IDLE; /* new state */ adbInputBuffer[0] = 0; /* may be able to take this out later */ delay(ADB_DELAY); /* delay */ break; } ADB_SET_STATE_ACTIVE(); /* tell ADB that we want * to send */ ADB_SET_STATE_ACKOFF(); /* make sure */ ADB_SET_SR_OUTPUT(); /* set shift register * for OUT */ ADB_SR() = adbOutputBuffer[adbSentChars + 1]; ADB_SET_STATE_ACKON(); /* tell ADB byte ready * to shift */ } } break; case ADB_ACTION_OUT: i = ADB_SR(); /* reset SR-intr in IFR */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SET_STATE_ACKOFF(); /* finish ACK */ adbSentChars++; if (ADB_INTR_IS_ON) { /* ADB intr low during write */ ADB_SET_STATE_IDLE_IISI(); /* reset */ ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ adbSentChars = 0; /* must start all over */ adbActionState = ADB_ACTION_IDLE; /* new state */ adbInputBuffer[0] = 0; adbWriteDelay = 1; /* must retry when done with * read */ delay(ADB_DELAY); /* delay */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ goto switch_start; /* process next state right * now */ break; } delay(ADB_DELAY); /* required delay */ (void)intr_dispatch(0x70); /* grab any serial interrupts */ if (adbOutputBuffer[0] == adbSentChars) { /* check for done */ if (0 == adb_cmd_result(adbOutputBuffer)) { /* do we expect data * back? */ adbWaiting = 1; /* signal waiting for return */ adbWaitingCmd = adbOutputBuffer[2]; /* save waiting command */ } else {/* no talk, so done */ /* set up stuff for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.cmd = adbWaitingCmd; packet.unsol = 0; packet.ack_only = 1; adb_pass_up(&packet); /* reset "waiting" vars, just in case */ adbWaitingCmd = 0; adbBuffer = (long)0; adbCompRout = (long)0; adbCompData = (long)0; } adbWriteDelay = 0; /* done writing */ adbActionState = ADB_ACTION_IDLE; /* signal bus is idle */ ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ ADB_SET_STATE_INACTIVE(); /* end of frame */ } else { ADB_SR() = adbOutputBuffer[adbSentChars + 1]; /* send next byte */ ADB_SET_STATE_ACKON(); /* signal byte ready to shift */ } break; case ADB_ACTION_NOTREADY: #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: not yet initialized\n"); #endif break; default: #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr: unknown ADB state\n"); #endif } ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ splx(s); /* restore */ return; } /* end adb_intr_IIsi */ /***************************************************************************** * if the device is currently busy, and there is no data waiting to go out, then * the data is "queued" in the outgoing buffer. If we are already waiting, then * we return. * in: if (in == 0) then the command string is built from command and buffer * if (in != 0) then in is used as the command string * buffer: additional data to be sent (used only if in == 0) * this is also where return data is stored * compRout: the completion routine that is called when then return value * is received (if a return value is expected) * data: a data pointer that can be used by the completion routine * command: an ADB command to be sent (used only if in == 0) * */ int send_adb_IIsi(u_char * in, u_char * buffer, void *compRout, void *data, int command) { int s, len; if (adbActionState == ADB_ACTION_NOTREADY) return 1; /* Don't interrupt while we are messing with the ADB */ s = splhigh(); if ((adbActionState == ADB_ACTION_IDLE) && /* ADB available? */ (ADB_INTR_IS_OFF)) {/* and no incoming interrupt? */ } else if (adbWriteDelay == 0) /* it's busy, but is anything waiting? */ adbWriteDelay = 1; /* if no, then we'll "queue" * it up */ else { splx(s); return 1; /* really busy! */ } if ((long)in == (long)0) { /* need to convert? */ /* * Don't need to use adb_cmd_extra here because this section * will be called ONLY when it is an ADB command (no RTC or * PRAM) */ if ((command & 0x0c) == 0x08) /* copy addl data ONLY if * doing a listen! */ len = buffer[0]; /* length of additional data */ else len = 0;/* no additional data */ adbOutputBuffer[0] = 2 + len; /* dev. type + command + addl. * data */ adbOutputBuffer[1] = 0x00; /* mark as an ADB command */ adbOutputBuffer[2] = (u_char)command; /* load command */ /* copy additional output data, if any */ memcpy(adbOutputBuffer + 3, buffer + 1, len); } else /* if data ready, just copy over */ memcpy(adbOutputBuffer, in, in[0] + 2); adbSentChars = 0; /* nothing sent yet */ adbBuffer = buffer; /* save buffer to know where to save result */ adbCompRout = compRout; /* save completion routine pointer */ adbCompData = data; /* save completion routine data pointer */ adbWaitingCmd = adbOutputBuffer[2]; /* save wait command */ if (adbWriteDelay != 1) { /* start command now? */ adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_STATE_ACTIVE(); /* tell ADB that we want to send */ ADB_SET_STATE_ACKOFF(); /* make sure */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ ADB_SR() = adbOutputBuffer[adbSentChars + 1]; /* load byte for output */ ADB_SET_STATE_ACKON(); /* tell ADB byte ready to shift */ } adbWriteDelay = 1; /* something in the write "queue" */ splx(s); if (0x0100 <= (s & 0x0700)) /* were VIA1 interrupts blocked? */ /* poll until byte done */ while ((adbActionState != ADB_ACTION_IDLE) || (ADB_INTR_IS_ON) || (adbWaiting == 1)) if (ADB_SR_INTR_IS_ON) { /* wait for "interrupt" */ adb_intr_IIsi(NULL); /* go process it */ if (adb_polling) adb_soft_intr(); } return 0; } /* send_adb_IIsi */ void adb_iop_recv(IOP *iop, struct iop_msg *msg) { struct adbCommand pkt; unsigned flags; if (adbActionState != ADB_ACTION_RUNNING) return; switch (msg->status) { case IOP_MSGSTAT_SENT: if (0 == adb_cmd_result(msg->msg + 1)) { adbWaiting = 1; adbWaitingCmd = msg->msg[2]; } break; case IOP_MSGSTAT_RECEIVED: case IOP_MSGSTAT_UNEXPECTED: flags = msg->msg[0]; if (flags != 0) { printf("ADB FLAGS 0x%x", flags); break; } if (adbWaiting && (msg->msg[2] == adbWaitingCmd)) { pkt.saveBuf = msg->msg + 1; pkt.compRout = adbCompRout; pkt.compData = adbCompData; pkt.unsol = 0; pkt.ack_only = 0; adb_pass_up(&pkt); adbWaitingCmd = 0; adbWaiting = 0; } else { pkt.unsol = 1; pkt.ack_only = 0; adb_pass_up(&pkt); } break; default: return; } } int send_adb_iop(int cmd, u_char * buffer, void *compRout, void *data) { u_char buff[32]; int cnt; if (adbActionState != ADB_ACTION_RUNNING) return -1; buff[0] = IOP_ADB_FL_EXPLICIT; buff[1] = buffer[0]; buff[2] = cmd; cnt = (int) buff[1]; memcpy(buff + 3, buffer + 1, cnt); return iop_send_msg(ISM_IOP, IOP_CHAN_ADB, buff, cnt+3, adb_iop_recv, NULL); } /* * adb_pass_up is called by the interrupt-time routines. * It takes the raw packet data that was received from the * device and puts it into the queue that the upper half * processes. It then signals for a soft ADB interrupt which * will eventually call the upper half routine (adb_soft_intr). * * If in->unsol is 0, then this is either the notification * that the packet was sent (on a LISTEN, for example), or the * response from the device (on a TALK). The completion routine * is called only if the user specified one. * * If in->unsol is 1, then this packet was unsolicited and * so we look up the device in the ADB device table to determine * what it's default service routine is. * * If in->ack_only is 1, then we really only need to call * the completion routine, so don't do any other stuff. * * Note that in->data contains the packet header AND data, * while adbInbound[]->data contains ONLY data. * * Note: Called only at interrupt time. Assumes this. */ void adb_pass_up(struct adbCommand *in) { int start = 0, len = 0, cmd = 0; ADBDataBlock block; /* temp for testing */ /*u_char *buffer = 0;*/ /*u_char *compdata = 0;*/ /*u_char *comprout = 0;*/ if (adbInCount >= ADB_QUEUE) { #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: ring buffer overflow\n"); #endif return; } if (in->ack_only) { len = in->data[0]; cmd = in->cmd; start = 0; } else { switch (adbHardware) { case ADB_HW_IOP: case ADB_HW_II: cmd = in->data[1]; if (in->data[0] < 2) len = 0; else len = in->data[0]-1; start = 1; break; case ADB_HW_IISI: case ADB_HW_CUDA: /* If it's unsolicited, accept only ADB data for now */ if (in->unsol) if (0 != in->data[2]) return; cmd = in->data[4]; if (in->data[0] < 5) len = 0; else len = in->data[0]-4; start = 4; break; case ADB_HW_PB: cmd = in->data[1]; if (in->data[0] < 2) len = 0; else len = in->data[0]-1; start = 1; break; case ADB_HW_UNKNOWN: return; } /* Make sure there is a valid device entry for this device */ if (in->unsol) { /* ignore unsolicited data during adbreinit */ if (adbStarting) return; /* get device's comp. routine and data area */ if (-1 == get_adb_info(&block, ADB_CMDADDR(cmd))) return; } } /* * If this is an unsolicited packet, we need to fill in * some info so adb_soft_intr can process this packet * properly. If it's not unsolicited, then use what * the caller sent us. */ if (in->unsol) { adbInbound[adbInTail].compRout = (void *)block.dbServiceRtPtr; adbInbound[adbInTail].compData = (void *)block.dbDataAreaAddr; adbInbound[adbInTail].saveBuf = (void *)adbInbound[adbInTail].data; } else { adbInbound[adbInTail].compRout = (void *)in->compRout; adbInbound[adbInTail].compData = (void *)in->compData; adbInbound[adbInTail].saveBuf = (void *)in->saveBuf; } #ifdef ADB_DEBUG if (adb_debug && in->data[1] == 2) printf_intr("adb: caught error\n"); #endif /* copy the packet data over */ /* * TO DO: If the *_intr routines fed their incoming data * directly into an adbCommand struct, which is passed to * this routine, then we could eliminate this copy. */ memcpy(adbInbound[adbInTail].data + 1, in->data + start + 1, len); adbInbound[adbInTail].data[0] = len; adbInbound[adbInTail].cmd = cmd; adbInCount++; if (++adbInTail >= ADB_QUEUE) adbInTail = 0; /* * If the debugger is running, call upper half manually. * Otherwise, trigger a soft interrupt to handle the rest later. */ if (adb_polling) adb_soft_intr(); else setsoftadb(); return; } /* * Called to process the packets after they have been * placed in the incoming queue. * */ void adb_soft_intr(void) { int s; int cmd = 0; u_char *buffer = 0; u_char *comprout = 0; u_char *compdata = 0; #if 0 s = splhigh(); printf_intr("sr: %x\n", (s & 0x0700)); splx(s); #endif /*delay(2*ADB_DELAY);*/ while (adbInCount) { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("%x %x %x ", adbInCount, adbInHead, adbInTail); #endif /* get the data we need from the queue */ buffer = adbInbound[adbInHead].saveBuf; comprout = adbInbound[adbInHead].compRout; compdata = adbInbound[adbInHead].compData; cmd = adbInbound[adbInHead].cmd; /* copy over data to data area if it's valid */ /* * Note that for unsol packets we don't want to copy the * data anywhere, so buffer was already set to 0. * For ack_only buffer was set to 0, so don't copy. */ if (buffer) memcpy(buffer, adbInbound[adbInHead].data, adbInbound[adbInHead].data[0] + 1); #ifdef ADB_DEBUG if (adb_debug & 0x80) { printf_intr("%p %p %p %x ", buffer, comprout, compdata, (short)cmd); printf_intr("buf: "); print_single(adbInbound[adbInHead].data); } #endif /* call default completion routine if it's valid */ if (comprout) { #ifdef __NetBSD__ asm(" movml #0xffff,sp@- | save all registers movl %0,a2 | compdata movl %1,a1 | comprout movl %2,a0 | buffer movl %3,d0 | cmd jbsr a1@ | go call the routine movml sp@+,#0xffff | restore all registers" : : "g"(compdata), "g"(comprout), "g"(buffer), "g"(cmd) : "d0", "a0", "a1", "a2"); #else /* for macos based testing */ asm { movem.l a0/a1/a2/d0, -(a7) move.l compdata, a2 move.l comprout, a1 move.l buffer, a0 move.w cmd, d0 jsr(a1) movem.l(a7)+, d0/a2/a1/a0 } #endif } s = splhigh(); adbInCount--; if (++adbInHead >= ADB_QUEUE) adbInHead = 0; splx(s); } return; } /* * This is my version of the ADBOp routine. It mainly just calls the * hardware-specific routine. * * data : pointer to data area to be used by compRout * compRout : completion routine * buffer : for LISTEN: points to data to send - MAX 8 data bytes, * byte 0 = # of bytes * : for TALK: points to place to save return data * command : the adb command to send * result : 0 = success * : -1 = could not complete */ int adb_op(Ptr buffer, Ptr compRout, Ptr data, short command) { int result; switch (adbHardware) { case ADB_HW_II: result = send_adb_II((u_char *)0, (u_char *)buffer, (void *)compRout, (void *)data, (int)command); if (result == 0) return 0; else return -1; break; case ADB_HW_IOP: #ifdef __notyet__ result = send_adb_iop((int)command, (u_char *)buffer, (void *)compRout, (void *)data); if (result == 0) return 0; else #endif return -1; break; case ADB_HW_IISI: result = send_adb_IIsi((u_char *)0, (u_char *)buffer, (void *)compRout, (void *)data, (int)command); /* * I wish I knew why this delay is needed. It usually needs to * be here when several commands are sent in close succession, * especially early in device probes when doing collision * detection. It must be some race condition. Sigh. - jpw */ delay(100); if (result == 0) return 0; else return -1; break; case ADB_HW_PB: result = pm_adb_op((u_char *)buffer, (void *)compRout, (void *)data, (int)command); if (result == 0) return 0; else return -1; break; case ADB_HW_CUDA: result = send_adb_cuda((u_char *)0, (u_char *)buffer, (void *)compRout, (void *)data, (int)command); if (result == 0) return 0; else return -1; break; case ADB_HW_UNKNOWN: default: return -1; } } /* * adb_hw_setup * This routine sets up the possible machine specific hardware * config (mainly VIA settings) for the various models. */ void adb_hw_setup(void) { volatile int i; u_char send_string[ADB_MAX_MSG_LENGTH]; switch (adbHardware) { case ADB_HW_II: via1_register_irq(2, adb_intr_II, NULL); via_reg(VIA1, vDirB) |= 0x30; /* register B bits 4 and 5: * outputs */ via_reg(VIA1, vDirB) &= 0xf7; /* register B bit 3: input */ via_reg(VIA1, vACR) &= ~vSR_OUT; /* make sure SR is set * to IN (II, IIsi) */ adbActionState = ADB_ACTION_IDLE; /* used by all types of * hardware (II, IIsi) */ adbBusState = ADB_BUS_IDLE; /* this var. used in II-series * code only */ via_reg(VIA1, vIER) = 0x84; /* make sure VIA interrupts * are on (II, IIsi) */ ADB_SET_STATE_IDLE_II(); /* set ADB bus state to idle */ ADB_VIA_CLR_INTR(); /* clear interrupt */ break; case ADB_HW_IOP: via_reg(VIA1, vIER) = 0x84; via_reg(VIA1, vIFR) = 0x04; #ifdef __notyet__ adbActionState = ADB_ACTION_RUNNING; #endif break; case ADB_HW_IISI: via1_register_irq(2, adb_intr_IIsi, NULL); via_reg(VIA1, vDirB) |= 0x30; /* register B bits 4 and 5: * outputs */ via_reg(VIA1, vDirB) &= 0xf7; /* register B bit 3: input */ via_reg(VIA1, vACR) &= ~vSR_OUT; /* make sure SR is set * to IN (II, IIsi) */ adbActionState = ADB_ACTION_IDLE; /* used by all types of * hardware (II, IIsi) */ adbBusState = ADB_BUS_IDLE; /* this var. used in II-series * code only */ via_reg(VIA1, vIER) = 0x84; /* make sure VIA interrupts * are on (II, IIsi) */ ADB_SET_STATE_IDLE_IISI(); /* set ADB bus state to idle */ /* get those pesky clock ticks we missed while booting */ for (i = 0; i < 30; i++) { delay(ADB_DELAY); adb_hw_setup_IIsi(send_string); #ifdef ADB_DEBUG if (adb_debug) { printf_intr("adb: cleanup: "); print_single(send_string); } #endif delay(ADB_DELAY); if (ADB_INTR_IS_OFF) break; } break; case ADB_HW_PB: /* * XXX - really PM_VIA_CLR_INTR - should we put it in * pm_direct.h? */ pm_hw_setup(); break; case ADB_HW_CUDA: via1_register_irq(2, adb_intr_cuda, NULL); via_reg(VIA1, vDirB) |= 0x30; /* register B bits 4 and 5: * outputs */ via_reg(VIA1, vDirB) &= 0xf7; /* register B bit 3: input */ via_reg(VIA1, vACR) &= ~vSR_OUT; /* make sure SR is set * to IN */ via_reg(VIA1, vACR) = (via_reg(VIA1, vACR) | 0x0c) & ~0x10; adbActionState = ADB_ACTION_IDLE; /* used by all types of * hardware */ adbBusState = ADB_BUS_IDLE; /* this var. used in II-series * code only */ via_reg(VIA1, vIER) = 0x84; /* make sure VIA interrupts * are on */ ADB_SET_STATE_IDLE_CUDA(); /* set ADB bus state to idle */ /* sort of a device reset */ i = ADB_SR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* no interrupts while clearing */ ADB_SET_STATE_IDLE_CUDA(); /* reset state to idle */ delay(ADB_DELAY); ADB_SET_STATE_TIP(); /* signal start of frame */ delay(ADB_DELAY); ADB_TOGGLE_STATE_ACK_CUDA(); delay(ADB_DELAY); ADB_CLR_STATE_TIP(); delay(ADB_DELAY); ADB_SET_STATE_IDLE_CUDA(); /* back to idle state */ i = ADB_SR(); /* clear interrupt */ ADB_VIA_INTR_ENABLE(); /* ints ok now */ break; case ADB_HW_UNKNOWN: default: via_reg(VIA1, vIER) = 0x04; /* turn interrupts off - TO * DO: turn PB ints off? */ return; break; } } /* * adb_hw_setup_IIsi * This is sort of a "read" routine that forces the adb hardware through a read cycle * if there is something waiting. This helps "clean up" any commands that may have gotten * stuck or stopped during the boot process. * */ void adb_hw_setup_IIsi(u_char * buffer) { int i; int dummy; int s; long my_time; int endofframe; delay(ADB_DELAY); i = 1; /* skip over [0] */ s = splhigh(); /* block ALL interrupts while we are working */ ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ /* this is required, especially on faster machines */ delay(ADB_DELAY); if (ADB_INTR_IS_ON) { ADB_SET_STATE_ACTIVE(); /* signal start of data frame */ endofframe = 0; while (0 == endofframe) { /* * Poll for ADB interrupt and watch for timeout. * If time out, keep going in hopes of not hanging * the ADB chip - I think */ my_time = ADB_DELAY * 5; while ((ADB_SR_INTR_IS_OFF) && (my_time-- > 0)) dummy = via_reg(VIA1, vBufB); buffer[i++] = ADB_SR(); /* reset interrupt flag by * reading vSR */ /* * Perhaps put in a check here that ignores all data * after the first ADB_MAX_MSG_LENGTH bytes ??? */ if (ADB_INTR_IS_OFF) /* check for end of frame */ endofframe = 1; ADB_SET_STATE_ACKON(); /* send ACK to ADB chip */ delay(ADB_DELAY); /* delay */ ADB_SET_STATE_ACKOFF(); /* send ACK to ADB chip */ } ADB_SET_STATE_INACTIVE(); /* signal end of frame and * delay */ /* probably don't need to delay this long */ delay(ADB_DELAY); } buffer[0] = --i; /* [0] is length of message */ ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ splx(s); /* restore interrupts */ return; } /* adb_hw_setup_IIsi */ /* * adb_reinit sets up the adb stuff * */ void adb_reinit(void) { u_char send_string[ADB_MAX_MSG_LENGTH]; ADBDataBlock data; /* temp. holder for getting device info */ volatile int i, x; int s; int command; int result; int saveptr; /* point to next free relocation address */ int device; int nonewtimes; /* times thru loop w/o any new devices */ /* Make sure we are not interrupted while building the table. */ /* ints must be on for PB & IOP (at least, for now) */ if (adbHardware != ADB_HW_PB && adbHardware != ADB_HW_IOP) s = splhigh(); else s = 0; /* XXX shut the compiler up*/ ADBNumDevices = 0; /* no devices yet */ /* Let intr routines know we are running reinit */ adbStarting = 1; /* * Initialize the ADB table. For now, we'll always use the same table * that is defined at the beginning of this file - no mallocs. */ for (i = 0; i < 16; i++) { ADBDevTable[i].devType = 0; ADBDevTable[i].origAddr = ADBDevTable[i].currentAddr = 0; } adb_setup_hw_type(); /* setup hardware type */ adb_hw_setup(); /* init the VIA bits and hard reset ADB */ delay(1000); /* send an ADB reset first */ (void)adb_op_sync((Ptr)0, (Ptr)0, (Ptr)0, (short)0x00); delay(3000); /* * Probe for ADB devices. Probe devices 1-15 quickly to determine * which device addresses are in use and which are free. For each * address that is in use, move the device at that address to a higher * free address. Continue doing this at that address until no device * responds at that address. Then move the last device that was moved * back to the original address. Do this for the remaining addresses * that we determined were in use. * * When finished, do this entire process over again with the updated * list of in use addresses. Do this until no new devices have been * found in 20 passes though the in use address list. (This probably * seems long and complicated, but it's the best way to detect multiple * devices at the same address - sometimes it takes a couple of tries * before the collision is detected.) */ /* initial scan through the devices */ for (i = 1; i < 16; i++) { command = ADBTALK(i, 3); result = adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); if (result == 0 && send_string[0] != 0) { /* found a device */ ++ADBNumDevices; KASSERT(ADBNumDevices < 16); ADBDevTable[ADBNumDevices].devType = (int)(send_string[2]); ADBDevTable[ADBNumDevices].origAddr = i; ADBDevTable[ADBNumDevices].currentAddr = i; ADBDevTable[ADBNumDevices].DataAreaAddr = (long)0; ADBDevTable[ADBNumDevices].ServiceRtPtr = (void *)0; pm_check_adb_devices(i); /* tell pm driver device * is here */ } } /* find highest unused address */ for (saveptr = 15; saveptr > 0; saveptr--) if (-1 == get_adb_info(&data, saveptr)) break; #ifdef ADB_DEBUG if (adb_debug & 0x80) { printf_intr("first free is: 0x%02x\n", saveptr); printf_intr("devices: %i\n", ADBNumDevices); } #endif nonewtimes = 0; /* no loops w/o new devices */ while (saveptr > 0 && nonewtimes++ < 11) { for (i = 1;saveptr > 0 && i <= ADBNumDevices; i++) { device = ADBDevTable[i].currentAddr; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("moving device 0x%02x to 0x%02x " "(index 0x%02x) ", device, saveptr, i); #endif /* send TALK R3 to address */ command = ADBTALK(device, 3); (void)adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); /* move device to higher address */ command = ADBLISTEN(device, 3); send_string[0] = 2; send_string[1] = (u_char)(saveptr | 0x60); send_string[2] = 0xfe; (void)adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); delay(1000); /* send TALK R3 - anthing at new address? */ command = ADBTALK(saveptr, 3); send_string[0] = 0; result = adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); delay(1000); if (result != 0 || send_string[0] == 0) { /* * maybe there's a communication breakdown; * just in case, move it back from whence it * came, and we'll try again later */ command = ADBLISTEN(saveptr, 3); send_string[0] = 2; send_string[1] = (u_char)(device | 0x60); send_string[2] = 0x00; (void)adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("failed, continuing\n"); #endif delay(1000); continue; } /* send TALK R3 - anything at old address? */ command = ADBTALK(device, 3); send_string[0] = 0; result = adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); if (result == 0 && send_string[0] != 0) { /* new device found */ /* update data for previously moved device */ ADBDevTable[i].currentAddr = saveptr; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("old device at index %i\n",i); #endif /* add new device in table */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("new device found\n"); #endif if (saveptr > ADBNumDevices) { ++ADBNumDevices; KASSERT(ADBNumDevices < 16); } ADBDevTable[ADBNumDevices].devType = (int)(send_string[2]); ADBDevTable[ADBNumDevices].origAddr = device; ADBDevTable[ADBNumDevices].currentAddr = device; /* These will be set correctly in adbsys.c */ /* Until then, unsol. data will be ignored. */ ADBDevTable[ADBNumDevices].DataAreaAddr = (long)0; ADBDevTable[ADBNumDevices].ServiceRtPtr = (void *)0; /* find next unused address */ for (x = saveptr; x > 0; x--) { if (-1 == get_adb_info(&data, x)) { saveptr = x; break; } } if (x == 0) saveptr = 0; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("new free is 0x%02x\n", saveptr); #endif nonewtimes = 0; /* tell pm driver device is here */ pm_check_adb_devices(device); } else { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("moving back...\n"); #endif /* move old device back */ command = ADBLISTEN(saveptr, 3); send_string[0] = 2; send_string[1] = (u_char)(device | 0x60); send_string[2] = 0xfe; (void)adb_op_sync((Ptr)send_string, (Ptr)0, (Ptr)0, (short)command); delay(1000); } } } #ifdef ADB_DEBUG if (adb_debug) { for (i = 1; i <= ADBNumDevices; i++) { x = get_ind_adb_info(&data, i); if (x != -1) printf_intr("index 0x%x, addr 0x%x, type 0x%hx\n", i, x, data.devType); } } #endif #ifndef MRG_ADB /* enable the programmer's switch, if we have one */ adb_prog_switch_enable(); #endif #ifdef ADB_DEBUG if (adb_debug) { if (0 == ADBNumDevices) /* tell user if no devices found */ printf_intr("adb: no devices found\n"); } #endif adbStarting = 0; /* not starting anymore */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: ADBReInit complete\n"); #endif if (adbHardware == ADB_HW_CUDA) callout_reset(&adb_cuda_tickle_ch, ADB_TICKLE_TICKS, (void *)adb_cuda_tickle, NULL); /* ints must be on for PB & IOP (at least, for now) */ if (adbHardware != ADB_HW_PB && adbHardware != ADB_HW_IOP) splx(s); return; } /* * adb_comp_exec * This is a general routine that calls the completion routine if there is one. * NOTE: This routine is now only used by pm_direct.c * All the code in this file (adb_direct.c) uses * the adb_pass_up routine now. */ void adb_comp_exec(void) { if ((long)0 != adbCompRout) /* don't call if empty return location */ #ifdef __NetBSD__ asm(" movml #0xffff,sp@- | save all registers movl %0,a2 | adbCompData movl %1,a1 | adbCompRout movl %2,a0 | adbBuffer movl %3,d0 | adbWaitingCmd jbsr a1@ | go call the routine movml sp@+,#0xffff | restore all registers" : : "g"(adbCompData), "g"(adbCompRout), "g"(adbBuffer), "g"(adbWaitingCmd) : "d0", "a0", "a1", "a2"); #else /* for Mac OS-based testing */ asm { movem.l a0/a1/a2/d0, -(a7) move.l adbCompData, a2 move.l adbCompRout, a1 move.l adbBuffer, a0 move.w adbWaitingCmd, d0 jsr(a1) movem.l(a7) +, d0/a2/a1/a0 } #endif } /* * adb_cmd_result * * This routine lets the caller know whether the specified adb command string * should expect a returned result, such as a TALK command. * * returns: 0 if a result should be expected * 1 if a result should NOT be expected */ int adb_cmd_result(u_char *in) { switch (adbHardware) { case ADB_HW_IOP: case ADB_HW_II: /* was it an ADB talk command? */ if ((in[1] & 0x0c) == 0x0c) return 0; return 1; case ADB_HW_IISI: case ADB_HW_CUDA: /* was it an ADB talk command? */ if ((in[1] == 0x00) && ((in[2] & 0x0c) == 0x0c)) return 0; /* was it an RTC/PRAM read date/time? */ if ((in[1] == 0x01) && (in[2] == 0x03)) return 0; return 1; case ADB_HW_PB: return 1; case ADB_HW_UNKNOWN: default: return 1; } } /* * adb_cmd_extra * * This routine lets the caller know whether the specified adb command string * may have extra data appended to the end of it, such as a LISTEN command. * * returns: 0 if extra data is allowed * 1 if extra data is NOT allowed */ int adb_cmd_extra(u_char *in) { switch (adbHardware) { case ADB_HW_II: case ADB_HW_IOP: if ((in[1] & 0x0c) == 0x08) /* was it a listen command? */ return 0; return 1; case ADB_HW_IISI: case ADB_HW_CUDA: /* * TO DO: support needs to be added to recognize RTC and PRAM * commands */ if ((in[2] & 0x0c) == 0x08) /* was it a listen command? */ return 0; /* add others later */ return 1; case ADB_HW_PB: return 1; case ADB_HW_UNKNOWN: default: return 1; } } void adb_setup_hw_type(void) { long response; response = mac68k_machine.machineid; /* * Determine what type of ADB hardware we are running on. */ switch (response) { case MACH_MACC610: /* Centris 610 */ case MACH_MACC650: /* Centris 650 */ case MACH_MACII: /* II */ case MACH_MACIICI: /* IIci */ case MACH_MACIICX: /* IIcx */ case MACH_MACIIX: /* IIx */ case MACH_MACQ610: /* Quadra 610 */ case MACH_MACQ650: /* Quadra 650 */ case MACH_MACQ700: /* Quadra 700 */ case MACH_MACQ800: /* Quadra 800 */ case MACH_MACSE30: /* SE/30 */ adbHardware = ADB_HW_II; #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using II series hardware support\n"); #endif break; case MACH_MACCLASSICII: /* Classic II */ case MACH_MACLCII: /* LC II, Performa 400/405/430 */ case MACH_MACLCIII: /* LC III, Performa 450 */ case MACH_MACIISI: /* IIsi */ case MACH_MACIIVI: /* IIvi */ case MACH_MACIIVX: /* IIvx */ case MACH_MACP460: /* Performa 460/465/467 */ case MACH_MACP600: /* Performa 600 */ adbHardware = ADB_HW_IISI; #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using IIsi series hardware support\n"); #endif break; case MACH_MACPB140: /* PowerBook 140 */ case MACH_MACPB145: /* PowerBook 145 */ case MACH_MACPB150: /* PowerBook 150 */ case MACH_MACPB160: /* PowerBook 160 */ case MACH_MACPB165: /* PowerBook 165 */ case MACH_MACPB165C: /* PowerBook 165c */ case MACH_MACPB170: /* PowerBook 170 */ case MACH_MACPB180: /* PowerBook 180 */ case MACH_MACPB180C: /* PowerBook 180c */ adbHardware = ADB_HW_PB; pm_setup_adb(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using PowerBook 100-series hardware support\n"); #endif break; case MACH_MACPB210: /* PowerBook Duo 210 */ case MACH_MACPB230: /* PowerBook Duo 230 */ case MACH_MACPB250: /* PowerBook Duo 250 */ case MACH_MACPB270: /* PowerBook Duo 270 */ case MACH_MACPB280: /* PowerBook Duo 280 */ case MACH_MACPB280C: /* PowerBook Duo 280c */ case MACH_MACPB500: /* PowerBook 500 series */ adbHardware = ADB_HW_PB; pm_setup_adb(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using PowerBook Duo-series and PowerBook 500-series hardware support\n"); #endif break; case MACH_MACC660AV: /* Centris 660AV */ case MACH_MACCCLASSIC: /* Color Classic */ case MACH_MACCCLASSICII: /* Color Classic II */ case MACH_MACLC475: /* LC 475, Performa 475/476 */ case MACH_MACLC475_33: /* Clock-chipped 47x */ case MACH_MACLC520: /* LC 520 */ case MACH_MACLC575: /* LC 575, Performa 575/577/578 */ case MACH_MACP550: /* LC 550, Performa 550 */ case MACH_MACTV: /* Macintosh TV */ case MACH_MACP580: /* Performa 580/588 */ case MACH_MACQ605: /* Quadra 605 */ case MACH_MACQ605_33: /* Clock-chipped Quadra 605 */ case MACH_MACQ630: /* LC 630, Performa 630, Quadra 630 */ case MACH_MACQ840AV: /* Quadra 840AV */ adbHardware = ADB_HW_CUDA; #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using Cuda series hardware support\n"); #endif break; case MACH_MACQ900: /* Quadra 900 */ case MACH_MACQ950: /* Quadra 950 */ case MACH_MACIIFX: /* Mac IIfx */ adbHardware = ADB_HW_IOP; iop_register_listener(ISM_IOP, IOP_CHAN_ADB, adb_iop_recv, NULL); #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: using IOP-based ADB\n"); #endif break; default: adbHardware = ADB_HW_UNKNOWN; #ifdef ADB_DEBUG if (adb_debug) { printf_intr("adb: hardware type unknown for this machine\n"); printf_intr("adb: ADB support is disabled\n"); } #endif break; } /* * Determine whether this machine has ADB based soft power. */ switch (response) { case MACH_MACCCLASSIC: /* Color Classic */ case MACH_MACCCLASSICII: /* Color Classic II */ case MACH_MACIISI: /* IIsi */ case MACH_MACIIVI: /* IIvi */ case MACH_MACIIVX: /* IIvx */ case MACH_MACLC520: /* LC 520 */ case MACH_MACLC575: /* LC 575, Performa 575/577/578 */ case MACH_MACP550: /* LC 550, Performa 550 */ case MACH_MACTV: /* Macintosh TV */ case MACH_MACP580: /* Performa 580/588 */ case MACH_MACP600: /* Performa 600 */ case MACH_MACQ630: /* LC 630, Performa 630, Quadra 630 */ case MACH_MACQ840AV: /* Quadra 840AV */ adbSoftPower = 1; break; } } int count_adbs(void) { int i; int found; found = 0; for (i = 1; i < 16; i++) if (0 != ADBDevTable[i].currentAddr) found++; return found; } int get_ind_adb_info(ADBDataBlock * info, int index) { if ((index < 1) || (index > 15)) /* check range 1-15 */ return (-1); #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("index 0x%x devType is: 0x%x\n", index, ADBDevTable[index].devType); #endif if (0 == ADBDevTable[index].devType) /* make sure it's a valid entry */ return (-1); info->devType = (unsigned char)(ADBDevTable[index].devType); info->origADBAddr = (unsigned char)(ADBDevTable[index].origAddr); info->dbServiceRtPtr = (Ptr)ADBDevTable[index].ServiceRtPtr; info->dbDataAreaAddr = (Ptr)ADBDevTable[index].DataAreaAddr; return (ADBDevTable[index].currentAddr); } int get_adb_info(ADBDataBlock * info, int adbAddr) { int i; if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ return (-1); for (i = 1; i < 15; i++) if (ADBDevTable[i].currentAddr == adbAddr) { info->devType = (unsigned char)(ADBDevTable[i].devType); info->origADBAddr = (unsigned char)(ADBDevTable[i].origAddr); info->dbServiceRtPtr = (Ptr)ADBDevTable[i].ServiceRtPtr; info->dbDataAreaAddr = ADBDevTable[i].DataAreaAddr; return 0; /* found */ } return (-1); /* not found */ } int set_adb_info(ADBSetInfoBlock * info, int adbAddr) { int i; if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ return (-1); for (i = 1; i < 15; i++) if (ADBDevTable[i].currentAddr == adbAddr) { ADBDevTable[i].ServiceRtPtr = (void *)(info->siServiceRtPtr); ADBDevTable[i].DataAreaAddr = info->siDataAreaAddr; return 0; /* found */ } return (-1); /* not found */ } #ifndef MRG_ADB long mrg_adbintr(void) { adb_intr(NULL); return 1; /* mimic mrg_adbintr in macrom.h just in case */ } long mrg_pmintr(void) { pm_intr(NULL); return 1; /* mimic mrg_pmintr in macrom.h just in case */ } /* caller should really use machine-independant version: getPramTime */ /* this version does pseudo-adb access only */ int adb_read_date_time(unsigned long *time) { u_char output[ADB_MAX_MSG_LENGTH]; int result; volatile int flag = 0; switch (adbHardware) { case ADB_HW_II: return -1; case ADB_HW_IOP: return -1; case ADB_HW_IISI: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x03; /* read date/time */ result = send_adb_IIsi((u_char *)output, (u_char *)output, (void *)adb_op_comprout, (int *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for result */ ; *time = (long)(*(long *)(output + 1)); return 0; case ADB_HW_PB: return -1; case ADB_HW_CUDA: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x03; /* read date/time */ result = send_adb_cuda((u_char *)output, (u_char *)output, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for result */ ; *time = (long)(*(long *)(output + 1)); return 0; case ADB_HW_UNKNOWN: default: return -1; } } /* caller should really use machine-independant version: setPramTime */ /* this version does pseudo-adb access only */ int adb_set_date_time(unsigned long time) { u_char output[ADB_MAX_MSG_LENGTH]; int result; volatile int flag = 0; switch (adbHardware) { case ADB_HW_II: return -1; case ADB_HW_IOP: return -1; case ADB_HW_IISI: output[0] = 0x06; /* 6 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x09; /* set date/time */ output[3] = (u_char)(time >> 24); output[4] = (u_char)(time >> 16); output[5] = (u_char)(time >> 8); output[6] = (u_char)(time); result = send_adb_IIsi((u_char *)output, (u_char *)0, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for send to finish */ ; return 0; case ADB_HW_PB: return -1; case ADB_HW_CUDA: output[0] = 0x06; /* 6 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x09; /* set date/time */ output[3] = (u_char)(time >> 24); output[4] = (u_char)(time >> 16); output[5] = (u_char)(time >> 8); output[6] = (u_char)(time); result = send_adb_cuda((u_char *)output, (u_char *)0, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for send to finish */ ; return 0; case ADB_HW_UNKNOWN: default: return -1; } } int adb_poweroff(void) { u_char output[ADB_MAX_MSG_LENGTH]; int result; if (!adbSoftPower) return -1; adb_polling = 1; switch (adbHardware) { case ADB_HW_IISI: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x0a; /* set date/time */ result = send_adb_IIsi((u_char *)output, (u_char *)0, (void *)0, (void *)0, (int)0); if (result != 0) /* exit if not sent */ return -1; for (;;); /* wait for power off */ return 0; case ADB_HW_PB: return -1; case ADB_HW_CUDA: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x0a; /* set date/time */ result = send_adb_cuda((u_char *)output, (u_char *)0, (void *)0, (void *)0, (int)0); if (result != 0) /* exit if not sent */ return -1; for (;;); /* wait for power off */ return 0; case ADB_HW_II: /* II models don't do ADB soft power */ case ADB_HW_IOP: /* IOP models don't do ADB soft power */ case ADB_HW_UNKNOWN: default: return -1; } } int adb_prog_switch_enable(void) { u_char output[ADB_MAX_MSG_LENGTH]; int result; volatile int flag = 0; switch (adbHardware) { case ADB_HW_IISI: output[0] = 0x03; /* 3 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x1c; /* prog. switch control */ output[3] = 0x01; /* enable */ result = send_adb_IIsi((u_char *)output, (u_char *)0, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for send to finish */ ; return 0; case ADB_HW_PB: return -1; case ADB_HW_II: /* II models don't do prog. switch */ case ADB_HW_IOP: /* IOP models don't do prog. switch */ case ADB_HW_CUDA: /* cuda doesn't do prog. switch TO DO: verify this */ case ADB_HW_UNKNOWN: default: return -1; } } int adb_prog_switch_disable(void) { u_char output[ADB_MAX_MSG_LENGTH]; int result; volatile int flag = 0; switch (adbHardware) { case ADB_HW_IISI: output[0] = 0x03; /* 3 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x1c; /* prog. switch control */ output[3] = 0x01; /* disable */ result = send_adb_IIsi((u_char *)output, (u_char *)0, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for send to finish */ ; return 0; case ADB_HW_PB: return -1; case ADB_HW_II: /* II models don't do prog. switch */ case ADB_HW_IOP: /* IOP models don't do prog. switch */ case ADB_HW_CUDA: /* cuda doesn't do prog. switch */ case ADB_HW_UNKNOWN: default: return -1; } } int CountADBs(void) { return (count_adbs()); } void ADBReInit(void) { adb_reinit(); } int GetIndADB(ADBDataBlock * info, int index) { return (get_ind_adb_info(info, index)); } int GetADBInfo(ADBDataBlock * info, int adbAddr) { return (get_adb_info(info, adbAddr)); } int SetADBInfo(ADBSetInfoBlock * info, int adbAddr) { return (set_adb_info(info, adbAddr)); } int ADBOp(Ptr buffer, Ptr compRout, Ptr data, short commandNum) { return (adb_op(buffer, compRout, data, commandNum)); } #endif