/* $NetBSD: dbrireg.h,v 1.3 2005/12/11 12:23:44 christos Exp $ */ /* * Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de) * Copyright (c) 1998, 1999 Brent Baccala (baccala@freesoft.org) * Copyright (c) 2001, 2002 Jared D. McNeill * Copyright (c) 2005 Michael Lorenz * All rights reserved. * * This driver is losely based on a Linux driver written by Rudolf Koenig and * Brent Baccala who kindly gave their permission to use their code in a * BSD-licensed driver. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Rudolf Koenig, Brent * Baccala, Jared D. McNeill. * 4. Neither the name of the author nor the names of any contributors may * be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #define DBRI_REG0 0x00L /* status and control */ #define DBRI_COMMAND_VALID (1<<15) #define DBRI_BURST_4 (1<<14) /* allow 4-word sbus bursts */ #define DBRI_BURST_16 (1<<13) /* allow 16-word sbus bursts */ #define DBRI_BURST_8 (1<<12) /* allow 8-word sbus bursts */ #define DBRI_CHI_ACTIVATE (1<<4) /* allow activation of CHI interface */ #define DBRI_DISABLE_MASTER (1<<2) /* disable master mode */ #define DBRI_SOFT_RESET (1<<0) /* soft reset */ #define DBRI_REG1 0x04UL /* mode and interrupt */ #define DBRI_MRR (1<<4) /* multiple error ack on sbus */ #define DBRI_MLE (1<<3) /* multiple late error on sbus */ #define DBRI_LBG (1<<2) /* lost bus grant on sbus */ #define DBRI_MBE (1<<1) /* burst error on sbus */ #define DBRI_REG2 0x08UL /* parallel I/O */ #define DBRI_PIO2_ENABLE (1<<6) /* enable pin 2 */ #define DBRI_PIO_ENABLE_ALL (0xf0) /* enable all the pins */ #define DBRI_PIO3 (1<<3) /* pin 3: 1: data mode, 0: ctrl mode */ #define DBRI_PIO2 (1<<2) /* pin 2: 1: onboard PDN */ /* XXX according to SPARCbook manual this is RESET */ #define DBRI_PIO1 (1<<1) /* pin 1: 0: reset */ /* XXX according to SPARCbook manual this is PDN */ #define DBRI_PIO0 (1<<0) /* pin 0: 1: speakerbox PDN */ #define DBRI_REG8 0x20UL /* command queue pointer */ #define DBRI_COMMAND_WAIT 0x0 #define DBRI_COMMAND_PAUSE 0x1 #define DBRI_COMMAND_IIQ 0x3 #define DBRI_COMMAND_SDP 0x5 #define DBRI_COMMAND_CDP 0x6 #define DBRI_COMMAND_DTS 0x7 #define DBRI_COMMAND_SSP 0x8 #define DBRI_COMMAND_CHI 0x9 #define DBRI_COMMAND_CDM 0xe /* CHI data mode */ /* interrupts */ #define DBRI_INTR_BRDY 1 /* buffer ready for processing */ #define DBRI_INTR_XCMP 8 /* transmission of frame complete */ #define DBRI_INTR_SBRI 9 /* BRI status change info */ #define DBRI_INTR_FXDT 10 /* fixed data change */ #define DBRI_INTR_UNDR 15 /* DMA underrun */ #define DBRI_INTR_CMD 38 /* setup data pipe */ /* IRM */ #define DBRI_SDP_2SAME (1<<18) /* report 2nd time in a row recv val */ #define DBRI_SDP_CHANGE (2<<18) /* report any changes */ #define DBRI_SDP_EVERY (3<<18) /* report any changes */ /* pipe data mode */ #define DBRI_SDP_FIXED (6<<13) /* short only */ #define DBRI_SDP_TO_SER (1<<12) /* direction */ #define DBRI_SDP_FROM_SER (0<<12) /* direction */ #define DBRI_SDP_CLEAR (1<<7) /* clear */ #define DBRI_SDP_VALID_POINTER (1<<10) /* pointer valid */ #define DBRI_SDP_MEM (0<<13) /* to/from memory */ #define DBRI_SDP_MSB (1<<11) /* bit order */ #define DBRI_SDP_LSB (0<<11) /* bit order */ /* define time slot */ #define DBRI_DTS_VI (1<<17) /* valid input time-slot descriptor */ #define DBRI_DTS_VO (1<<16) /* valid output time-slot descriptor */ #define DBRI_DTS_INS (1<<15) /* insert time-slot */ #define DBRI_DTS_DEL (0<<15) /* delete time-slot */ #define DBRI_DTS_PRVIN(v) ((v)<<10) /* previous in-pipe */ #define DBRI_DTS_PRVOUT(v) ((v)<<5) /* previous out-pipe */ /* time slot defines */ #define DBRI_TS_ANCHOR (7<<10) /* starting short pipes */ #define DBRI_TS_NEXT(v) ((v)<<0) /* pipe #: 0-15 long, 16-21 short */ #define DBRI_TS_LEN(v) ((v)<<24) /* # of bits in this timeslot */ #define DBRI_TS_CYCLE(v) ((v)<<14) /* bit count at start of cycle */ /* concentration highway interface (CHI) modes */ #define DBRI_CHI_CHICM(v) ((v)<<16) /* clock mode */ #define DBRI_CHI_BPF(v) ((v)<<0) /* bits per frame */ #define DBRI_CHI_FD (1<<11) /* frame drive */ /* CHI data mode */ #define DBRI_CDM_XCE (1<<2) /* transmit on rising edge of CHICK */ #define DBRI_CDM_XEN (1<<1) /* transmit highway enable */ #define DBRI_CDM_REN (1<<0) /* receive highway enable */ /* transmit descriptor defines */ #define DBRI_TD_CNT(v) ((v)<<16) /* # valid bytes in buffer */ #define DBRI_TD_STATUS(v) ((v)&0xff) /* transmit status */ #define DBRI_TD_EOF (1<<31) /* end of frame */ #define DBRI_TD_FINAL (1<<15) /* final interrupt */ #define DBRI_TD_IDLE (1<<13) /* transmit idle characters */ #define DBRI_TD_TBC (1<<0) /* transmit buffer complete */