/*	$NetBSD: ncr_5380.h,v 1.4 1995/08/25 07:30:37 phil Exp $	*/

/*
 * Mach Operating System
 * Copyright (c) 1991,1990,1989 Carnegie Mellon University
 * All Rights Reserved.
 * 
 * Permission to use, copy, modify and distribute this software and its
 * documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 * 
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS 
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
 * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 * 
 * Carnegie Mellon requests users of this software to return to
 * 
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 * 
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */
/*
 *	File: scsi_5380.h
 * 	Author: Alessandro Forin, Carnegie Mellon University
 *	Date:	5/91
 *
 *	Defines for the NCR 5380 (SCSI chip), aka Am5380
 *
 *      Modified for the pc532 by Phil Nelson.  1/94
 */

/*
 * Register map
 */

typedef struct {
	volatile unsigned char sci_data;	/* r:  Current data */
#define	sci_odata sci_data			/* w:  Out data */

	volatile unsigned char sci_icmd;	/* rw: Initiator command */

	volatile unsigned char sci_mode;	/* rw: Mode */

	volatile unsigned char sci_tcmd;	/* rw: Target command */

	volatile unsigned char sci_bus_csr;	/* r:  Bus Status */
#define	sci_sel_enb sci_bus_csr			/* w:  Select enable */

	volatile unsigned char sci_csr;		/* r:  Status */
#define	sci_dma_send sci_csr			/* w:  Start dma send data */

	volatile unsigned char sci_idata;	/* r:  Input data */
#define	sci_trecv sci_idata			/* w:  Start dma receive, target */

	volatile unsigned char sci_iack;	/* r:  Interrupt Acknowledge  */
#define	sci_irecv sci_iack			/* w:  Start dma receive, initiator */
} sci_regmap_t;


/*
 * Initiator command register
 */

#define SCI_ICMD_DATA		0x01		/* rw: Assert data bus   */
#define SCI_ICMD_ATN		0x02		/* rw: Assert ATN signal */
#define SCI_ICMD_SEL		0x04		/* rw: Assert SEL signal */
#define SCI_ICMD_BSY		0x08		/* rw: Assert BSY signal */
#define SCI_ICMD_ACK		0x10		/* rw: Assert ACK signal */
#define SCI_ICMD_LST		0x20		/* r:  Lost arbitration */
#define SCI_ICMD_DIFF	SCI_ICMD_LST		/* w:  Differential cable */
#define SCI_ICMD_AIP		0x40		/* r:  Arbitration in progress */
#define SCI_ICMD_TEST	SCI_ICMD_AIP		/* w:  Test mode */
#define SCI_ICMD_RST		0x80		/* rw: Assert RST signal */


/*
 * Mode register
 */

#define SCI_MODE_ARB		0x01		/* rw: Start arbitration */
#define SCI_MODE_DMA		0x02		/* rw: Enable DMA xfers */
#define SCI_MODE_MONBSY		0x04		/* rw: Monitor BSY signal */
#define SCI_MODE_DMA_IE		0x08		/* rw: Enable DMA complete interrupt */
#define SCI_MODE_PERR_IE	0x10		/* rw: Interrupt on parity errors */
#define SCI_MODE_PAR_CHK	0x20		/* rw: Check parity */
#define SCI_MODE_TARGET		0x40		/* rw: Target mode (Initiator if 0) */
#define SCI_MODE_BLOCKDMA	0x80		/* rw: Block-mode DMA handshake (MBZ) */


/*
 * Target command register
 */

#define SCI_TCMD_IO		0x01		/* rw: Assert I/O signal */
#define SCI_TCMD_CD		0x02		/* rw: Assert C/D signal */
#define SCI_TCMD_MSG		0x04		/* rw: Assert MSG signal */
#define SCI_TCMD_PHASE_MASK	0x07		/* r:  Mask for current bus phase */
#define SCI_TCMD_REQ		0x08		/* rw: Assert REQ signal */
#define	SCI_TCMD_LAST_SENT	0x80		/* ro: Last byte was xferred
						 *     (not on 5380/1) */

#define	SCI_PHASE(x)		SCSI_PHASE(x)

/*
 * Current (SCSI) Bus status
 */

#define SCI_BUS_DBP		0x01		/* r:  Data Bus parity */
#define SCI_BUS_SEL		0x02		/* r:  SEL signal */
#define SCI_BUS_IO		0x04		/* r:  I/O signal */
#define SCI_BUS_CD		0x08		/* r:  C/D signal */
#define SCI_BUS_MSG		0x10		/* r:  MSG signal */
#define SCI_BUS_REQ		0x20		/* r:  REQ signal */
#define SCI_BUS_BSY		0x40		/* r:  BSY signal */
#define SCI_BUS_RST		0x80		/* r:  RST signal */

#define	SCI_CUR_PHASE(x)	SCSI_PHASE((x)>>2)

/*
 * Bus and Status register
 */

#define SCI_CSR_ACK		0x01		/* r:  ACK signal */
#define SCI_CSR_ATN		0x02		/* r:  ATN signal */
#define SCI_CSR_DISC		0x04		/* r:  Disconnected (BSY==0) */
#define SCI_CSR_PHASE_MATCH	0x08		/* r:  Bus and SCI_TCMD match */
#define SCI_CSR_INT		0x10		/* r:  Interrupt request */
#define SCI_CSR_PERR		0x20		/* r:  Parity error */
#define SCI_CSR_DREQ		0x40		/* r:  DMA request */
#define SCI_CSR_DONE		0x80		/* r:  DMA count is zero */


/* icu scsi chip switching */

#define ICU_ADR		0xfffffe00
#define ICU_IO		(ICU_ADR+20)
#define ICU_DIR		(ICU_ADR+21)
#define ICU_DATA	(ICU_ADR+19)
#define ICU_SCSI_BIT	0x80