/* $NetBSD: ahc_pci.c,v 1.11 1997/03/13 01:04:02 cgd Exp $ */ /* * Product specific probe and attach routines for: * 3940, 2940, aic7880, aic7870, aic7860 and aic7850 SCSI controllers * * Copyright (c) 1995, 1996 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from Id: aic7870.c,v 1.37 1996/06/08 06:55:55 gibbs Exp */ #if defined(__FreeBSD__) #include #endif #if NPCI > 0 || defined(__NetBSD__) #include #include #include #include #include #if defined(__NetBSD__) #include #include #include #endif /* defined(__NetBSD__) */ #include #include #if defined(__FreeBSD__) #include #include #include #include #include #include #define PCI_BASEADR0 PCI_MAP_REG_START #elif defined(__NetBSD__) #include #include #include #include #include /* * Under normal circumstances, these messages are unnecessary * and not terribly cosmetic. */ #ifdef DEBUG #define bootverbose 1 #else #define bootverbose 0 #endif #define PCI_BASEADR0 PCI_MAPREG_START #endif /* defined(__NetBSD__) */ #define PCI_DEVICE_ID_ADAPTEC_3940U 0x82789004ul #define PCI_DEVICE_ID_ADAPTEC_2944U 0x84789004ul #define PCI_DEVICE_ID_ADAPTEC_2940U 0x81789004ul #define PCI_DEVICE_ID_ADAPTEC_2940AU 0x61789004ul #define PCI_DEVICE_ID_ADAPTEC_3940 0x72789004ul #define PCI_DEVICE_ID_ADAPTEC_2944 0x74789004ul #define PCI_DEVICE_ID_ADAPTEC_2940 0x71789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7880 0x80789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7870 0x70789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7860 0x60789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7855 0x55789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7850 0x50789004ul #define DEVCONFIG 0x40 #define MPORTMODE 0x00000400ul /* aic7870 only */ #define RAMPSM 0x00000200ul /* aic7870 only */ #define VOLSENSE 0x00000100ul #define SCBRAMSEL 0x00000080ul #define MRDCEN 0x00000040ul #define EXTSCBTIME 0x00000020ul /* aic7870 only */ #define EXTSCBPEN 0x00000010ul /* aic7870 only */ #define BERREN 0x00000008ul #define DACEN 0x00000004ul #define STPWLEVEL 0x00000002ul #define DIFACTNEGEN 0x00000001ul /* aic7870 only */ #define CSIZE_LATTIME 0x0c #define CACHESIZE 0x0000003ful /* only 5 bits */ #define LATTIME 0x0000ff00ul /* * Define the format of the aic78X0 SEEPROM registers (16 bits). * */ struct seeprom_config { /* * SCSI ID Configuration Flags */ #define CFXFER 0x0007 /* synchronous transfer rate */ #define CFSYNCH 0x0008 /* enable synchronous transfer */ #define CFDISC 0x0010 /* enable disconnection */ #define CFWIDEB 0x0020 /* wide bus device */ /* UNUSED 0x00C0 */ #define CFSTART 0x0100 /* send start unit SCSI command */ #define CFINCBIOS 0x0200 /* include in BIOS scan */ #define CFRNFOUND 0x0400 /* report even if not found */ /* UNUSED 0xf800 */ u_int16_t device_flags[16]; /* words 0-15 */ /* * BIOS Control Bits */ #define CFSUPREM 0x0001 /* support all removeable drives */ #define CFSUPREMB 0x0002 /* support removeable drives for boot only */ #define CFBIOSEN 0x0004 /* BIOS enabled */ /* UNUSED 0x0008 */ #define CFSM2DRV 0x0010 /* support more than two drives */ /* UNUSED 0x0060 */ #define CFEXTEND 0x0080 /* extended translation enabled */ /* UNUSED 0xff00 */ u_int16_t bios_control; /* word 16 */ /* * Host Adapter Control Bits */ /* UNUSED 0x0001 */ #define CFULTRAEN 0x0002 /* Ultra SCSI speed enable (Ultra cards) */ #define CFSTERM 0x0004 /* SCSI low byte termination (non-wide cards) */ #define CFWSTERM 0x0008 /* SCSI high byte termination (wide card) */ #define CFSPARITY 0x0010 /* SCSI parity */ /* UNUSED 0x0020 */ #define CFRESETB 0x0040 /* reset SCSI bus at IC initialization */ /* UNUSED 0xff80 */ u_int16_t adapter_control; /* word 17 */ /* * Bus Release, Host Adapter ID */ #define CFSCSIID 0x000f /* host adapter SCSI ID */ /* UNUSED 0x00f0 */ #define CFBRTIME 0xff00 /* bus release time */ u_int16_t brtime_id; /* word 18 */ /* * Maximum targets */ #define CFMAXTARG 0x00ff /* maximum targets */ /* UNUSED 0xff00 */ u_int16_t max_targets; /* word 19 */ u_int16_t res_1[11]; /* words 20-30 */ u_int16_t checksum; /* word 31 */ }; static void load_seeprom __P((struct ahc_data *ahc)); static int acquire_seeprom __P((struct seeprom_descriptor *sd)); static void release_seeprom __P((struct seeprom_descriptor *sd)); static u_char aic3940_count; #if defined(__FreeBSD__) static char* aic7870_probe __P((pcici_t tag, pcidi_t type)); static void aic7870_attach __P((pcici_t config_id, int unit)); static struct pci_device ahc_pci_driver = { "ahc", aic7870_probe, aic7870_attach, &ahc_unit, NULL }; DATA_SET (pcidevice_set, ahc_pci_driver); static char* aic7870_probe (pcici_t tag, pcidi_t type) { switch(type) { case PCI_DEVICE_ID_ADAPTEC_3940U: return ("Adaptec 3940 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_3940: return ("Adaptec 3940 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944U: return ("Adaptec 2944 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940U: return ("Adaptec 2940 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944: return ("Adaptec 2944 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940: return ("Adaptec 2940 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940AU: return ("Adaptec 2940A Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7880: return ("Adaptec aic7880 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7870: return ("Adaptec aic7870 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7860: return ("Adaptec aic7860 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7855: return ("Adaptec aic7855 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7850: return ("Adaptec aic7850 SCSI host adapter"); break; default: break; } return (0); } #elif defined(__NetBSD__) #ifdef __BROKEN_INDIRECT_CONFIG int ahc_pci_probe __P((struct device *, void *, void *)); #else int ahc_pci_probe __P((struct device *, struct cfdata *, void *)); #endif void ahc_pci_attach __P((struct device *, struct device *, void *)); struct cfattach ahc_pci_ca = { sizeof(struct ahc_data), ahc_pci_probe, ahc_pci_attach }; int ahc_pci_probe(parent, match, aux) struct device *parent; #ifdef __BROKEN_INDIRECT_CONFIG void *match; #else struct cfdata *match; #endif void *aux; { struct pci_attach_args *pa = aux; switch (pa->pa_id) { case PCI_DEVICE_ID_ADAPTEC_3940U: case PCI_DEVICE_ID_ADAPTEC_2944U: case PCI_DEVICE_ID_ADAPTEC_2940U: case PCI_DEVICE_ID_ADAPTEC_2940AU: case PCI_DEVICE_ID_ADAPTEC_3940: case PCI_DEVICE_ID_ADAPTEC_2944: case PCI_DEVICE_ID_ADAPTEC_2940: case PCI_DEVICE_ID_ADAPTEC_AIC7880: case PCI_DEVICE_ID_ADAPTEC_AIC7870: case PCI_DEVICE_ID_ADAPTEC_AIC7860: case PCI_DEVICE_ID_ADAPTEC_AIC7855: case PCI_DEVICE_ID_ADAPTEC_AIC7850: return 1; } return 0; } #endif /* defined(__NetBSD__) */ #if defined(__FreeBSD__) static void aic7870_attach(config_id, unit) pcici_t config_id; int unit; #elif defined(__NetBSD__) void ahc_pci_attach(parent, self, aux) struct device *parent, *self; void *aux; #endif { #if defined(__FreeBSD__) u_long io_port; int unit = ahc->sc_dev.dv_unit; #elif defined(__NetBSD__) struct pci_attach_args *pa = aux; struct ahc_data *ahc = (void *)self; bus_addr_t iobase; bus_size_t iosize; bus_space_handle_t ioh; pci_intr_handle_t ih; const char *intrstr; #endif u_long id; unsigned opri = 0; ahc_type ahc_t = AHC_NONE; ahc_flag ahc_f = AHC_FNONE; #if defined(__FreeBSD__) struct ahc_data *ahc; #endif u_char ultra_enb = 0; u_char our_id = 0; #if defined(__FreeBSD__) if(!(io_port = pci_conf_read(config_id, PCI_BASEADR0))) return; /* * The first bit of PCI_BASEADR0 is always * set hence we mask it off. */ io_port &= 0xfffffffe; #elif defined(__NetBSD__) if (pci_io_find(pa->pa_pc, pa->pa_tag, PCI_BASEADR0, &iobase, &iosize)) return; if (bus_space_map(pa->pa_iot, iobase, iosize, 0, &ioh)) return; #endif #if defined(__FreeBSD__) switch ((id = pci_conf_read(config_id, PCI_ID_REG))) { #elif defined(__NetBSD__) switch (id = pa->pa_id) { #endif case PCI_DEVICE_ID_ADAPTEC_3940U: case PCI_DEVICE_ID_ADAPTEC_3940: if (id == PCI_DEVICE_ID_ADAPTEC_3940U) ahc_t = AHC_394U; else ahc_t = AHC_394; aic3940_count++; if(!(aic3940_count & 0x01)) /* Even count implies second channel */ ahc_f |= AHC_CHNLB; break; case PCI_DEVICE_ID_ADAPTEC_2944U: case PCI_DEVICE_ID_ADAPTEC_2940U: ahc_t = AHC_294U; break; case PCI_DEVICE_ID_ADAPTEC_2944: case PCI_DEVICE_ID_ADAPTEC_2940: ahc_t = AHC_294; break; case PCI_DEVICE_ID_ADAPTEC_2940AU: ahc_t = AHC_294AU; break; case PCI_DEVICE_ID_ADAPTEC_AIC7880: ahc_t = AHC_AIC7880; break; case PCI_DEVICE_ID_ADAPTEC_AIC7870: ahc_t = AHC_AIC7870; break; case PCI_DEVICE_ID_ADAPTEC_AIC7860: ahc_t = AHC_AIC7860; break; case PCI_DEVICE_ID_ADAPTEC_AIC7855: case PCI_DEVICE_ID_ADAPTEC_AIC7850: ahc_t = AHC_AIC7850; break; default: break; } /* On all PCI adapters, we allow SCB paging */ ahc_f |= AHC_PAGESCBS; /* Remeber how the card was setup in case there is no SEEPROM */ #if defined(__FreeBSD__) our_id = inb(SCSIID + io_port) & OID; if(ahc_t & AHC_ULTRA) ultra_enb = inb(SXFRCTL0 + io_port) & ULTRAEN; #else our_id = bus_space_read_1(pa->pa_iot, ioh, SCSIID) & OID; if(ahc_t & AHC_ULTRA) ultra_enb = bus_space_read_1(pa->pa_iot, ioh, SXFRCTL0) & ULTRAEN; #endif #if defined(__FreeBSD__) ahc_reset(io_port); #elif defined(__NetBSD__) printf("\n"); ahc_reset(ahc->sc_dev.dv_xname, pa->pa_iot, ioh); #endif if(ahc_t & AHC_AIC7870){ #if defined(__FreeBSD__) u_long devconfig = pci_conf_read(config_id, DEVCONFIG); #elif defined(__NetBSD__) u_long devconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG); #endif if(devconfig & (RAMPSM)) { /* * External SRAM present. Have the probe walk * the SCBs to see how much SRAM we have and set * the number of SCBs accordingly. We have to * turn off SCBRAMSEL to access the external * SCB SRAM. * * It seems that early versions of the aic7870 * didn't use these bits, hence the hack for the * 3940 above. I would guess that recent 3940s * using later aic7870 or aic7880 chips do * actually set RAMPSM. * * The documentation isn't clear, but it sounds * like the value written to devconfig must not * have RAMPSM set. The second sixteen bits of * the register are R/O anyway, so it shouldn't * affect RAMPSM either way. */ devconfig &= ~(RAMPSM|SCBRAMSEL); #if defined(__FreeBSD__) pci_conf_write(config_id, DEVCONFIG, devconfig); #elif defined(__NetBSD__) pci_conf_write(pa->pa_pc, pa->pa_tag, DEVCONFIG, devconfig); #endif } } #if defined(__FreeBSD__) if(!(ahc = ahc_alloc(unit, io_port, ahc_t, ahc_f))) return; /* XXX PCI code should take return status */ if(!(pci_map_int(config_id, ahc_intr, (void *)ahc, &bio_imask))) { ahc_free(ahc); return; } #elif defined(__NetBSD__) ahc_construct(ahc, pa->pa_iot, ioh, ahc_t, ahc_f); if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline, &ih)) { printf("%s: couldn't map interrupt\n", ahc->sc_dev.dv_xname); ahc_free(ahc); return; } intrstr = pci_intr_string(pa->pa_pc, ih); #if defined(__OpenBSD__) ahc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahc_intr, ahc, ahc->sc_dev.dv_xname); #else ahc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahc_intr, ahc); #endif if (ahc->sc_ih == NULL) { printf("%s: couldn't establish interrupt", ahc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); ahc_free(ahc); return; } if (intrstr != NULL) printf("%s: interrupting at %s\n", ahc->sc_dev.dv_xname, intrstr); #endif /* * Protect ourself from spurrious interrupts during * intialization. */ opri = splbio(); /* * Do aic7870/aic7880/aic7850 specific initialization */ { u_char sblkctl; char *id_string; switch(ahc->type) { case AHC_394U: case AHC_294U: case AHC_AIC7880: { id_string = "aic7880 "; load_seeprom(ahc); break; } case AHC_394: case AHC_294: case AHC_AIC7870: { id_string = "aic7870 "; load_seeprom(ahc); break; } case AHC_294AU: case AHC_AIC7860: { id_string = "aic7860 "; load_seeprom(ahc); break; } case AHC_AIC7850: { id_string = "aic7850 "; /* * Use defaults, if the chip wasn't initialized by * a BIOS. */ ahc->flags |= AHC_USEDEFAULTS; break; } default: { printf("ahc: Unknown controller type. Ignoring.\n"); ahc_free(ahc); splx(opri); return; } } /* * Take the LED out of diagnostic mode */ sblkctl = AHC_INB(ahc, SBLKCTL); AHC_OUTB(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); /* * I don't know where this is set in the SEEPROM or by the * BIOS, so we default to 100%. */ AHC_OUTB(ahc, DSPCISTATUS, DFTHRSH_100); if(ahc->flags & AHC_USEDEFAULTS) { /* * PCI Adapter default setup * Should only be used if the adapter does not have * an SEEPROM. */ /* See if someone else set us up already */ u_long i; for(i = TARG_SCRATCH; i < 0x60; i++) { if(AHC_INB(ahc, i) != 0x00) break; } if(i == TARG_SCRATCH) { /* * Try looking for all ones. You can get * either. */ for (i = TARG_SCRATCH; i < 0x60; i++) { if(AHC_INB(ahc, i) != 0xff) break; } } if((i != 0x60) && (our_id != 0)) { printf("%s: Using left over BIOS settings\n", ahc_name(ahc)); ahc->flags &= ~AHC_USEDEFAULTS; } else our_id = 0x07; AHC_OUTB(ahc, SCSICONF, (our_id & 0x07)|ENSPCHK|RESET_SCSI); /* In case we are a wide card */ AHC_OUTB(ahc, SCSICONF + 1, our_id); if(!ultra_enb || (ahc->flags & AHC_USEDEFAULTS)) { /* * If there wasn't a BIOS or the board * wasn't in this mode to begin with, * turn off ultra. */ ahc->type &= ~AHC_ULTRA; } } printf("%s: %s", ahc_name(ahc), id_string); } if(ahc_init(ahc)){ ahc_free(ahc); splx(opri); return; /* XXX PCI code should take return status */ } splx(opri); ahc_attach(ahc); } /* * Read the SEEPROM. Return 0 on failure */ void load_seeprom(ahc) struct ahc_data *ahc; { struct seeprom_descriptor sd; struct seeprom_config sc; u_short *scarray = (u_short *)≻ u_short checksum = 0; u_char scsi_conf; u_char host_id; int have_seeprom; #if defined(__FreeBSD__) sd.sd_iobase = ahc->baseport + SEECTL; #elif defined(__NetBSD__) sd.sd_iot = ahc->sc_iot; sd.sd_ioh = ahc->sc_ioh; sd.sd_offset = SEECTL; #endif sd.sd_MS = SEEMS; sd.sd_RDY = SEERDY; sd.sd_CS = SEECS; sd.sd_CK = SEECK; sd.sd_DO = SEEDO; sd.sd_DI = SEEDI; if(bootverbose) printf("%s: Reading SEEPROM...", ahc_name(ahc)); have_seeprom = acquire_seeprom(&sd); if (have_seeprom) { have_seeprom = read_seeprom(&sd, (u_int16_t *)&sc, ahc->flags & AHC_CHNLB, sizeof(sc)/2); release_seeprom(&sd); if (have_seeprom) { /* Check checksum */ int i; for (i = 0;i < (sizeof(sc)/2 - 1);i = i + 1) checksum = checksum + scarray[i]; if (checksum != sc.checksum) { if(bootverbose) printf ("checksum error"); have_seeprom = 0; } else if(bootverbose) printf("done.\n"); } } if (!have_seeprom) { if(bootverbose) printf("\n%s: No SEEPROM availible\n", ahc_name(ahc)); ahc->flags |= AHC_USEDEFAULTS; } else { /* * Put the data we've collected down into SRAM * where ahc_init will find it. */ int i; int max_targ = sc.max_targets & CFMAXTARG; for(i = 0; i < max_targ; i++){ u_char target_settings; target_settings = (sc.device_flags[i] & CFXFER) << 4; if (sc.device_flags[i] & CFSYNCH) target_settings |= SOFS; if (sc.device_flags[i] & CFWIDEB) target_settings |= WIDEXFER; if (sc.device_flags[i] & CFDISC) ahc->discenable |= (0x01 << i); AHC_OUTB(ahc, TARG_SCRATCH+i, target_settings); } AHC_OUTB(ahc, DISC_DSB, ~(ahc->discenable & 0xff)); AHC_OUTB(ahc, DISC_DSB + 1, ~((ahc->discenable >> 8) & 0xff)); host_id = sc.brtime_id & CFSCSIID; scsi_conf = (host_id & 0x7); if(sc.adapter_control & CFSPARITY) scsi_conf |= ENSPCHK; if(sc.adapter_control & CFRESETB) scsi_conf |= RESET_SCSI; if(ahc->type & AHC_ULTRA) { /* Should we enable Ultra mode? */ if(!(sc.adapter_control & CFULTRAEN)) /* Treat us as a non-ultra card */ ahc->type &= ~AHC_ULTRA; } /* Set the host ID */ AHC_OUTB(ahc, SCSICONF, scsi_conf); /* In case we are a wide card */ AHC_OUTB(ahc, SCSICONF + 1, host_id); } } static int acquire_seeprom(sd) struct seeprom_descriptor *sd; { int wait; /* * Request access of the memory port. When access is * granted, SEERDY will go high. We use a 1 second * timeout which should be near 1 second more than * is needed. Reason: after the chip reset, there * should be no contention. */ SEEPROM_OUTB(sd, sd->sd_MS); wait = 1000; /* 1 second timeout in msec */ while (--wait && ((SEEPROM_INB(sd) & sd->sd_RDY) == 0)) { DELAY (1000); /* delay 1 msec */ } if ((SEEPROM_INB(sd) & sd->sd_RDY) == 0) { SEEPROM_OUTB(sd, 0); return (0); } return(1); } static void release_seeprom(sd) struct seeprom_descriptor *sd; { /* Release access to the memory port and the serial EEPROM. */ SEEPROM_OUTB(sd, 0); } #endif /* NPCI > 0 */