# $NetBSD: GENERIC,v 1.57 2000/01/23 23:46:20 hubertf Exp $ # # GENERIC VAX configuration file; all supported devices. # include "arch/vax/conf/std.vax" #ident "GENERIC-$Revision: 1.57 $" # Here are all different supported CPU types listed. options "VAX8600" options "VAX8200" options "VAX780" options "VAX750" options "VAX630" # MV II options "VAX650" # MV III, 3600, 3800, 3900 options "VAX670" # VAX 4000/300 options "VAX410" # VS 2000 options "VAX43" # VS 3100/76 options "VAX46" # VS 4000/60 options "VAX48" # VS 4000 VLC options "VAX49" # VS 4000/90 # Max users on system; this is just a hint maxusers 8 # Kernel compiled-in symbolic debugger & system call tracer #options DDB #options DDB_HISTORY_SIZE=100 # enable history editing in DDB options KTRACE #options DIAGNOSTIC,DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG #options SCSIVERBOSE # Verbose SCSI errors # Pull in config fragments for kernel crypto. This is required for # options IPSEC etc. to work. If you want to run with IPSEC, uncomment # one of these, based on whether you use crypto-us or crypto-intl, and # adjust the prefixes as necessary. #prefix ../crypto-us/sys #cinclude "conf/files.crypto-us" #prefix #prefix ../crypto-intl/sys #cinclude "conf/files.crypto-intl" #prefix # Network support #options GATEWAY options INET options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) #options IPSEC_DEBUG # debug for IP security # All supported filesystem types file-system FFS file-system LFS file-system MFS file-system NFS file-system FDESC file-system KERNFS file-system NULLFS file-system OVERLAY # overlay file system file-system PROCFS file-system UMAPFS file-system UNION file-system CD9660 options QUOTA #options FFS_EI # FFS Endian Independant support #options SOFTDEP # FFS soft updates support. options NFSSERVER options NFS_BOOT_BOOTP,NFS_BOOT_DHCP # Use bootp <> dhcp options NFS_BOOT_BOOTPARAM # Use the Sun way for netbooting. # WS console uses VT100 terminal emulation options WSEMUL_VT100 options WSDISPLAY_DEFAULTSCREENS=8 # System V shared memory & semaphores support. options SYSVMSG options SYSVSEM options SYSVSHM # Old compat stuff; needed to run 4.3BSD Reno programs. # Note that if COMPAT_ULTRIX is set, you lose compatibility with # 4.3BSD Reno programs and get Ultrix compatibility instead. # (They cannot coexist). options COMPAT_VAX1K # Must be present to run pre-1.4 binaries. options COMPAT_43 options COMPAT_09 options COMPAT_10 options COMPAT_11 options COMPAT_12 options COMPAT_13 options COMPAT_14 #options COMPAT_ULTRIX options COMPAT_IBCS2 # DEC SVR.3 compatilibity options LKM # Kernel(s) to compile config netbsd root on ? type ? mainbus0 at root # All buses; from the beginning attached to mainbus. abus0 at mainbus0 # Master bus on VAX 8600 sbi0 at mainbus0 # SBI, master bus on 11/780. cmi0 at mainbus0 # 11/750 internal bus. bi0 at mainbus0 # VAX 8200 vsbus0 at mainbus0 # All VAXstations ibus0 at mainbus0 # All Microvax #nbi0 at mainbus0 # VAX 8800 #xmi0 at mainbus0 # VAX 6000 # Vsbus, the virtual VAXstation bus, and possible devices. le0 at vsbus0 csr 0x200e0000 # LANCE ethernet ze0 at vsbus0 csr 0x20008000 # SGEC ethernet dz0 at vsbus0 csr 0x200a0000 # DC-367 DZ-11 lookalike ctlr dz0 at vsbus0 csr 0x25000000 # VS4000/90 serial line #hdc0 at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr ncr0 at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-ctlr ncr1 at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-ctlr smg0 at vsbus0 csr 0x200f0000 # Small monochrome display ctlr. #clr0 at vsbus0 csr 0x30000000 # 4- or 8-bitplans color graphics #rd* at hdc0 drive? # RD5x disks #ry* at hdc0 drive? # RX floppies # Ibus, the internal bus on most Microvaxen uba0 at ibus0 # Qbus adapter ze0 at ibus0 # SGEC on-board ethernet #shac0 at ibus0 # DSSI controller # Devices connected at VAXBI cpu* at bi? node? # KA820/KA825 cpu mem* at bi? node? # Memory subsystems #uba* at bi? node? # DWBUA BI-Unibus adapter #ni* at bi? node? # DEBNA/DEBNT ethernet adapter #kdb* at bi? node? # KDB50 MSCP disk ctlr #mscpbus* at kdb? # CMI (VAX 11/750) mem* at cmi? tr? # Memory subsystems uba* at cmi? tr? # Unibus adapters mba* at cmi? tr? # Massbus adapters # SBI (VAX 11/780, VAX 8600) sbi* at abus0 # VAX 8600 can have up to 4 SBI's. mem* at sbi? tr? # Memory subsystems uba* at sbi? tr? # Unibus adapters mba* at sbi? tr? # Massbus adapters # Devices on Massbus adapters hp* at mba? drive? # RM/RP disk drives # Devices on Unibus/Qbus adapters uda0 at uba? csr 0172150 # UDA50/RQDX? uda1 at uba? csr 0160334 mtc0 at uba? csr 0174500 # Tape MSCP ctlr #ts0 at uba? csr 0172520 # TS11/TSV05 tape. #qd0 at uba? csr 0177400 # 4- or 8-bitplans color graphics #qv0 at uba? csr 0177400 # Monochrome graphics #de0 at uba? csr 0174510 # DELUA/DEUNA qe0 at uba? csr 0174440 # DEQNA/DELQA dhu0 at uba? csr 0160440 # DHU-11 dz0 at uba? csr 0160100 # DZ-11 dl0 at uba? csr 0176500 # DL-11 # MSCP devices mscpbus* at uda? mscpbus* at mtc? #mscpbus* at kdb? ra* at mscpbus? drive? # MSCP disk rx* at mscpbus? drive? # MSCP floppy mt* at mscpbus? drive? # MSCP tape # VS2000 builtin MFM controller (HDC9224) #hdc0 at vsbus0 # The strange builtin MFM controller # SCSI devices scsibus* at ncr? sd* at scsibus? target? lun? st* at scsibus? target? lun? cd* at scsibus? target? lun? ch* at scsibus? target? lun? ss* at scsibus? target? lun? uk* at scsibus? target? lun? # VAXstation graphics support wsdisplay0 at smg0 #wsdisplay0 at clr0 #wsdisplay0 at qd0 #wsdisplay0 at qv0 lkc0 at dz0 pseudo-device loop 1 pseudo-device pty 48 pseudo-device bpfilter 8 # Not supported by de yet. pseudo-device sl 2 pseudo-device ppp 2 pseudo-device tun 2 #pseudo-device gre 2 # generic L3 over IP tunnel pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith 1 # IPv[46] tcp relay translation i/f pseudo-device tb 1 pseudo-device vnd 4 pseudo-device ccd 4 #pseudo-device raid 4 # RAIDframe disk driver # rnd is EXPERIMENTAL #pseudo-device rnd # /dev/random and in-kernel generator