/* $NetBSD: dpti.c,v 1.24 2006/03/29 06:45:05 thorpej Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Andrew Doran. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1996-2000 Distributed Processing Technology Corporation * Copyright (c) 2000 Adaptec Corporation * All rights reserved. * * TERMS AND CONDITIONS OF USE * * Redistribution and use in source form, with or without modification, are * permitted provided that redistributions of source code must retain the * above copyright notice, this list of conditions and the following disclaimer. * * This software is provided `as is' by Adaptec and any express or implied * warranties, including, but not limited to, the implied warranties of * merchantability and fitness for a particular purpose, are disclaimed. In no * event shall Adaptec be liable for any direct, indirect, incidental, special, * exemplary or consequential damages (including, but not limited to, * procurement of substitute goods or services; loss of use, data, or profits; * or business interruptions) however caused and on any theory of liability, * whether in contract, strict liability, or tort (including negligence or * otherwise) arising in any way out of the use of this driver software, even * if advised of the possibility of such damage. */ /* * Adaptec/DPT I2O control interface. */ #include __KERNEL_RCSID(0, "$NetBSD: dpti.c,v 1.24 2006/03/29 06:45:05 thorpej Exp $"); #include "opt_i2o.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __i386__ #include #endif #include #include #include #include #include #ifdef I2ODEBUG #define DPRINTF(x) printf x #else #define DPRINTF(x) #endif static struct dpt_sig dpti_sig = { { 'd', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION, #if defined(__i386__) PROC_INTEL, #elif defined(__powerpc__) PROC_POWERPC, #elif defined(__alpha__) PROC_ALPHA, #elif defined(__mips__) PROC_MIPS, #elif defined(__sparc64__) PROC_ULTRASPARC, #endif #if defined(__i386__) PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM, #else 0, #endif FT_HBADRVR, 0, OEM_DPT, OS_FREE_BSD, /* XXX */ CAP_ABOVE16MB, DEV_ALL, ADF_ALL_SC5, 0, 0, DPTI_VERSION, DPTI_REVISION, DPTI_SUBREVISION, DPTI_MONTH, DPTI_DAY, DPTI_YEAR, "" /* Will be filled later */ }; void dpti_attach(struct device *, struct device *, void *); int dpti_blinkled(struct dpti_softc *); int dpti_ctlrinfo(struct dpti_softc *, int, caddr_t); int dpti_match(struct device *, struct cfdata *, void *); int dpti_passthrough(struct dpti_softc *, caddr_t, struct proc *); int dpti_sysinfo(struct dpti_softc *, int, caddr_t); dev_type_open(dptiopen); dev_type_ioctl(dptiioctl); const struct cdevsw dpti_cdevsw = { dptiopen, nullclose, noread, nowrite, dptiioctl, nostop, notty, nopoll, nommap, nokqfilter, }; extern struct cfdriver dpti_cd; CFATTACH_DECL(dpti, sizeof(struct dpti_softc), dpti_match, dpti_attach, NULL, NULL); int dpti_match(struct device *parent, struct cfdata *match, void *aux) { struct iop_attach_args *ia; struct iop_softc *iop; ia = aux; iop = (struct iop_softc *)parent; if (ia->ia_class != I2O_CLASS_ANY || ia->ia_tid != I2O_TID_IOP) return (0); if (le16toh(iop->sc_status.orgid) != I2O_ORG_DPT) return (0); return (1); } void dpti_attach(struct device *parent, struct device *self, void *aux) { struct iop_softc *iop; struct dpti_softc *sc; struct { struct i2o_param_op_results pr; struct i2o_param_read_results prr; struct i2o_dpt_param_exec_iop_buffers dib; } __attribute__ ((__packed__)) param; int rv; sc = device_private(self); iop = device_private(parent); /* * Tell the world what we are. The description in the signature * must be no more than 46 bytes long (see dptivar.h). */ printf(": DPT/Adaptec RAID management interface\n"); snprintf(dpti_sig.dsDescription, sizeof(dpti_sig.dsDescription), "NetBSD %s I2O OSM", osrelease); rv = iop_field_get_all(iop, I2O_TID_IOP, I2O_DPT_PARAM_EXEC_IOP_BUFFERS, ¶m, sizeof(param), NULL); if (rv != 0) return; sc->sc_blinkled = le32toh(param.dib.serialoutputoff) + 8; } int dptiopen(dev_t dev, int flag, int mode, struct lwp *l) { if (securelevel > 1) return (EPERM); if (device_lookup(&dpti_cd, minor(dev)) == NULL) return (ENXIO); return (0); } int dptiioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct lwp *l) { struct iop_softc *iop; struct dpti_softc *sc; struct ioctl_pt *pt; int i, size, rv, linux; sc = device_lookup(&dpti_cd, minor(dev)); iop = (struct iop_softc *)device_parent(&sc->sc_dv); rv = 0; if (cmd == PTIOCLINUX) { pt = (struct ioctl_pt *)data; size = IOCPARM_LEN(pt->com); cmd = pt->com & 0xffff; data = pt->data; linux = 1; } else { size = IOCPARM_LEN(cmd); cmd = cmd & 0xffff; linux = 0; } switch (cmd) { case DPT_SIGNATURE: if (size > sizeof(dpti_sig)) size = sizeof(dpti_sig); memcpy(data, &dpti_sig, size); break; case DPT_CTRLINFO: rv = dpti_ctlrinfo(sc, size, data); break; case DPT_SYSINFO: rv = dpti_sysinfo(sc, size, data); break; case DPT_BLINKLED: if ((i = dpti_blinkled(sc)) == -1) i = 0; if (size == 0) { rv = copyout(&i, *(caddr_t *)data, sizeof(i)); break; } *(int *)data = i; break; case DPT_TARGET_BUSY: /* * XXX This is here to stop linux_machdepioctl() from * whining about an unknown ioctl. */ rv = EIO; break; case DPT_I2OUSRCMD: if (sc->sc_nactive++ >= 2) tsleep(&sc->sc_nactive, PRIBIO, "dptislp", 0); if (linux) rv = dpti_passthrough(sc, data, l->l_proc); else rv = dpti_passthrough(sc, *(caddr_t *)data, l->l_proc); sc->sc_nactive--; wakeup_one(&sc->sc_nactive); break; case DPT_I2ORESETCMD: printf("%s: I2ORESETCMD not implemented\n", sc->sc_dv.dv_xname); rv = EOPNOTSUPP; break; case DPT_I2ORESCANCMD: if ((rv = lockmgr(&iop->sc_conflock, LK_EXCLUSIVE, NULL)) != 0) break; rv = iop_reconfigure(iop, 0); lockmgr(&iop->sc_conflock, LK_RELEASE, NULL); break; default: rv = ENOTTY; break; } return (rv); } int dpti_blinkled(struct dpti_softc *sc) { struct iop_softc *iop; u_int v; iop = (struct iop_softc *)device_parent(&sc->sc_dv); v = bus_space_read_1(iop->sc_iot, iop->sc_ioh, sc->sc_blinkled + 0); if (v == 0xbc) { v = bus_space_read_1(iop->sc_iot, iop->sc_ioh, sc->sc_blinkled + 1); return (v); } return (-1); } int dpti_ctlrinfo(struct dpti_softc *sc, int size, caddr_t data) { struct dpt_ctlrinfo info; struct iop_softc *iop; int rv, i; iop = (struct iop_softc *)device_parent(&sc->sc_dv); memset(&info, 0, sizeof(info)); info.length = sizeof(info) - sizeof(u_int16_t); info.drvrHBAnum = device_unit(&sc->sc_dv); info.baseAddr = iop->sc_memaddr; if ((i = dpti_blinkled(sc)) == -1) i = 0; info.blinkState = i; info.pciBusNum = iop->sc_pcibus; info.pciDeviceNum = iop->sc_pcidev; info.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O; info.Interrupt = 10; /* XXX */ if (size > sizeof(*data)) { memcpy(data, &info, min(sizeof(info), size)); rv = 0; } else rv = copyout(&info, *(caddr_t *)data, sizeof(info)); return (rv); } int dpti_sysinfo(struct dpti_softc *sc, int size, caddr_t data) { struct dpt_sysinfo info; int rv; #ifdef __i386__ int i, j; #endif memset(&info, 0, sizeof(info)); #ifdef __i386__ outb (0x70, 0x12); i = inb(0x71); j = i >> 4; if (i == 0x0f) { outb (0x70, 0x19); j = inb (0x71); } info.drive0CMOS = j; j = i & 0x0f; if (i == 0x0f) { outb (0x70, 0x1a); j = inb (0x71); } info.drive1CMOS = j; info.processorFamily = dpti_sig.dsProcessorFamily; /* * Get the conventional memory size from CMOS. */ outb(0x70, 0x16); j = inb(0x71); j <<= 8; outb(0x70, 0x15); j |= inb(0x71); info.conventionalMemSize = j; /* * Get the extended memory size from CMOS. */ outb(0x70, 0x31); j = inb(0x71); j <<= 8; outb(0x70, 0x30); j |= inb(0x71); info.extendedMemSize = j; switch (cpu_class) { case CPUCLASS_386: info.processorType = PROC_386; break; case CPUCLASS_486: info.processorType = PROC_486; break; case CPUCLASS_586: info.processorType = PROC_PENTIUM; break; case CPUCLASS_686: default: info.processorType = PROC_SEXIUM; break; } info.flags = SI_CMOS_Valid | SI_BusTypeValid | SI_MemorySizeValid | SI_NO_SmartROM; #else info.flags = SI_BusTypeValid | SI_NO_SmartROM; #endif info.busType = SI_PCI_BUS; /* * Copy out the info structure to the user. */ if (size > sizeof(*data)) { memcpy(data, &info, min(sizeof(info), size)); rv = 0; } else rv = copyout(&info, *(caddr_t *)data, sizeof(info)); return (rv); } int dpti_passthrough(struct dpti_softc *sc, caddr_t data, struct proc *proc) { struct iop_softc *iop; struct i2o_msg mh, *mf; struct i2o_reply rh; struct iop_msg *im; struct dpti_ptbuf bufs[IOP_MAX_MSG_XFERS]; u_int32_t mbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)]; u_int32_t rbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)]; int rv, msgsize, repsize, sgoff, i, mapped, nbuf, nfrag, j, sz; u_int32_t *p, *pmax; iop = (struct iop_softc *)device_parent(&sc->sc_dv); im = NULL; if ((rv = dpti_blinkled(sc)) != -1) { if (rv != 0) { printf("%s: adapter blinkled = 0x%02x\n", sc->sc_dv.dv_xname, rv); return (EIO); } } /* * Copy in the message frame header and determine the size of the * full message frame. */ if ((rv = copyin(data, &mh, sizeof(mh))) != 0) { DPRINTF(("%s: message copyin failed\n", sc->sc_dv.dv_xname)); return (rv); } msgsize = (mh.msgflags >> 14) & ~3; if (msgsize < sizeof(mh) || msgsize >= IOP_MAX_MSG_SIZE) { DPRINTF(("%s: bad message frame size\n", sc->sc_dv.dv_xname)); return (EINVAL); } /* * Handle special commands. */ switch (mh.msgfunc >> 24) { case I2O_EXEC_IOP_RESET: printf("%s: I2O_EXEC_IOP_RESET not implemented\n", sc->sc_dv.dv_xname); return (EOPNOTSUPP); case I2O_EXEC_OUTBOUND_INIT: printf("%s: I2O_EXEC_OUTBOUND_INIT not implemented\n", sc->sc_dv.dv_xname); return (EOPNOTSUPP); case I2O_EXEC_SYS_TAB_SET: printf("%s: I2O_EXEC_SYS_TAB_SET not implemented\n", sc->sc_dv.dv_xname); return (EOPNOTSUPP); case I2O_EXEC_STATUS_GET: if ((rv = iop_status_get(iop, 0)) == 0) rv = copyout(&iop->sc_status, data + msgsize, sizeof(iop->sc_status)); return (rv); } /* * Copy in the full message frame. */ if ((rv = copyin(data, mbtmp, msgsize)) != 0) { DPRINTF(("%s: full message copyin failed\n", sc->sc_dv.dv_xname)); return (rv); } /* * Determine the size of the reply frame, and copy it in. */ if ((rv = copyin(data + msgsize, &rh, sizeof(rh))) != 0) { DPRINTF(("%s: reply copyin failed\n", sc->sc_dv.dv_xname)); return (rv); } repsize = (rh.msgflags >> 14) & ~3; if (repsize < sizeof(rh) || repsize >= IOP_MAX_MSG_SIZE) { DPRINTF(("%s: bad reply header size\n", sc->sc_dv.dv_xname)); return (EINVAL); } if ((rv = copyin(data + msgsize, rbtmp, repsize)) != 0) { DPRINTF(("%s: reply too large\n", sc->sc_dv.dv_xname)); return (rv); } /* * If the message has a scatter gather list, it must be comprised of * simple elements. If any one transfer contains multiple segments, * we allocate a temporary buffer for it; otherwise, the buffer will * be mapped directly. */ mapped = 0; if ((sgoff = ((mh.msgflags >> 4) & 15)) != 0) { if ((sgoff + 2) > (msgsize >> 2)) { DPRINTF(("%s: invalid message size fields\n", sc->sc_dv.dv_xname)); return (EINVAL); } memset(bufs, 0, sizeof(bufs)); p = mbtmp + sgoff; pmax = mbtmp + (msgsize >> 2) - 2; for (nbuf = 0; nbuf < IOP_MAX_MSG_XFERS; nbuf++, p += 2) { if (p > pmax) { DPRINTF(("%s: invalid SGL (1)\n", sc->sc_dv.dv_xname)); goto bad; } if ((p[0] & 0x30000000) != I2O_SGL_SIMPLE) { DPRINTF(("%s: invalid SGL (2)\n", sc->sc_dv.dv_xname)); goto bad; } bufs[nbuf].db_out = (p[0] & I2O_SGL_DATA_OUT) != 0; bufs[nbuf].db_ptr = NULL; if ((p[0] & I2O_SGL_END_BUFFER) != 0) { if ((p[0] & 0x00ffffff) > IOP_MAX_XFER) { DPRINTF(("%s: buffer too large\n", sc->sc_dv.dv_xname)); goto bad; } bufs[nbuf].db_ptr = (caddr_t)p[1]; bufs[nbuf].db_proc = proc; bufs[nbuf].db_size = p[0] & 0x00ffffff; if ((p[0] & I2O_SGL_END) != 0) break; continue; } /* * The buffer has multiple segments. Determine the * total size. */ nfrag = 0; sz = 0; for (; p <= pmax; p += 2) { if (nfrag == DPTI_MAX_SEGS) { DPRINTF(("%s: too many segments\n", sc->sc_dv.dv_xname)); goto bad; } bufs[nbuf].db_frags[nfrag].iov_len = p[0] & 0x00ffffff; bufs[nbuf].db_frags[nfrag].iov_base = (void *)p[1]; sz += p[0] & 0x00ffffff; nfrag++; if ((p[0] & I2O_SGL_END) != 0) { if ((p[0] & I2O_SGL_END_BUFFER) == 0) { DPRINTF(( "%s: invalid SGL (3)\n", sc->sc_dv.dv_xname)); goto bad; } break; } if ((p[0] & I2O_SGL_END_BUFFER) != 0) break; } bufs[nbuf].db_nfrag = nfrag; if (p > pmax) { DPRINTF(("%s: invalid SGL (4)\n", sc->sc_dv.dv_xname)); goto bad; } if (sz > IOP_MAX_XFER) { DPRINTF(("%s: buffer too large\n", sc->sc_dv.dv_xname)); goto bad; } bufs[nbuf].db_size = sz; bufs[nbuf].db_ptr = malloc(sz, M_DEVBUF, M_WAITOK); if (bufs[nbuf].db_ptr == NULL) { DPRINTF(("%s: allocation failure\n", sc->sc_dv.dv_xname)); rv = ENOMEM; goto bad; } for (i = 0, sz = 0; i < bufs[nbuf].db_nfrag; i++) { rv = copyin(bufs[nbuf].db_frags[i].iov_base, bufs[nbuf].db_ptr + sz, bufs[nbuf].db_frags[i].iov_len); if (rv != 0) { DPRINTF(("%s: frag copyin\n", sc->sc_dv.dv_xname)); goto bad; } sz += bufs[nbuf].db_frags[i].iov_len; } if ((p[0] & I2O_SGL_END) != 0) break; } if (nbuf == IOP_MAX_MSG_XFERS) { DPRINTF(("%s: too many transfers\n", sc->sc_dv.dv_xname)); goto bad; } } else nbuf = -1; /* * Allocate a wrapper, and adjust the message header fields to * indicate that no scatter-gather list is currently present. */ im = iop_msg_alloc(iop, IM_WAIT | IM_NOSTATUS); im->im_rb = (struct i2o_reply *)rbtmp; mf = (struct i2o_msg *)mbtmp; mf->msgictx = IOP_ICTX; mf->msgtctx = im->im_tctx; if (sgoff != 0) mf->msgflags = (mf->msgflags & 0xff0f) | (sgoff << 16); /* * Map the data transfer(s). */ for (i = 0; i <= nbuf; i++) { rv = iop_msg_map(iop, im, mbtmp, bufs[i].db_ptr, bufs[i].db_size, bufs[i].db_out, bufs[i].db_proc); if (rv != 0) { DPRINTF(("%s: msg_map failed, rv = %d\n", sc->sc_dv.dv_xname, rv)); goto bad; } mapped = 1; } /* * Start the command and sleep until it completes. */ if ((rv = iop_msg_post(iop, im, mbtmp, 5*60*1000)) != 0) goto bad; /* * Copy out the reply frame. */ if ((rv = copyout(rbtmp, data + msgsize, repsize)) != 0) DPRINTF(("%s: reply copyout() failed\n", sc->sc_dv.dv_xname)); bad: /* * Free resources and return to the caller. */ if (im != NULL) { if (mapped) iop_msg_unmap(iop, im); iop_msg_free(iop, im); } for (i = 0; i <= nbuf; i++) { if (bufs[i].db_proc != NULL) continue; if (!bufs[i].db_out && rv == 0) { for (j = 0, sz = 0; j < bufs[i].db_nfrag; j++) { rv = copyout(bufs[i].db_ptr + sz, bufs[i].db_frags[j].iov_base, bufs[i].db_frags[j].iov_len); if (rv != 0) break; sz += bufs[i].db_frags[j].iov_len; } } if (bufs[i].db_ptr != NULL) free(bufs[i].db_ptr, M_DEVBUF); } return (rv); }