#!/bin/sh

# Sample Postfix installation script. Run this from the top-level
# Postfix source directory.

PATH=/bin:/usr/bin:/usr/sbin:/usr/etc:/sbin:/etc
umask 022

test -t 0 &&
cat <<EOF

Warning: this script replaces existing sendmail or Postfix programs.
Make backups if you want to be able to recover.

In addition to doing a fresh install, this script can change an
existing installation from using a world-writable maildrop to a
group-writable one. It cannot be used to change Postfix queue
file/directory ownership.

Before installing files, this script prompts you for some definitions.
Most definitions will be remembered, so you have to specify them
only once. All definitions have a reasonable default value.

    install_root - prefix for installed file names (for package building)

    tempdir - where to write scratch files

    config_directory - directory with Postfix configuration files.
    daemon_directory - directory with Postfix daemon programs.
    command_directory - directory with Postfix administrative commands.
    queue_directory - directory with Postfix queues.

    sendmail_path - full pathname of the Postfix sendmail command.
    newaliases_path - full pathname of the Postfix newaliases command.
    mailq_path - full pathname of the Postfix mailq command.

    mail_owner - owner of Postfix queue files.

    setgid - groupname, e.g., postdrop (default: no). See INSTALL section 12.
    manpages - "no" or path to man tree. Example: /usr/local/man.

EOF

# By now, shells must have functions. Ultrix users must use sh5 or lose.
# The following shell functions replace files/symlinks while minimizing
# the time that a file does not exist, and avoid copying over programs
# in order to not disturb running programs.

censored_ls() {
    ls "$@" | egrep -v '^\.|/\.|CVS|RCS|SCCS'
}

compare_or_replace() {
    (cmp $2 $3 >/dev/null 2>&1 && echo Skipping $3...) || {
	echo Updating $3...
	rm -f $tempdir/junk || exit 1
	cp $2 $tempdir/junk || exit 1
	chmod $1 $tempdir/junk || exit 1
	mv -f $tempdir/junk $3 || exit 1
	chmod $1 $3 || exit 1
    }
}

compare_or_symlink() {
    (cmp $1 $2 >/dev/null 2>&1 && echo Skipping $2...) || {
	echo Updating $2...
	rm -f $tempdir/junk || exit 1
	dest=`echo $1 | sed '
	    s;^'$install_root';;
	    s;/\./;/;g
	    s;//*;/;g
	    s;^/;;
	'`
	link=`echo $2 | sed '
	    s;^'$install_root';;
	    s;/\./;/;g
	    s;//*;/;g
	    s;^/;;
	    s;/[^/]*$;/;
	    s;[^/]*/;../;g
	    s;$;'$dest';
	'`
	ln -s $link $tempdir/junk || exit 1
	mv -f $tempdir/junk $2 || { 
	    echo Error: your mv command is unable to rename symlinks. 1>&2
	    echo If you run Linux, upgrade to GNU fileutils-4.0 or better, 1>&2
	    echo or choose a tempdir that is in the same file system as $2. 1>&2
	    exit 1
	}
    }
}

compare_or_move() {
    (cmp $2 $3 >/dev/null 2>&1 && echo Skipping $3...) || {
	echo Updating $3...
	mv -f $2 $3 || exit 1
	chmod $1 $3 || exit 1
    }
}

# How to supress newlines in echo

case `echo -n` in
"") n=-n; c=;;
 *) n=; c='\c';;
esac

# Default settings. Most are clobbered by remembered settings.

: ${install_root=/}
: ${tempdir=`pwd`}
: ${config_directory=/etc/postfix}
: ${daemon_directory=/usr/libexec/postfix}
: ${command_directory=/usr/sbin}
: ${queue_directory=/var/spool/postfix}
if [ -f /usr/lib/sendmail ]
    then : ${sendmail_path=/usr/lib/sendmail}
    else : ${sendmail_path=/usr/sbin/sendmail}
fi
: ${newaliases_path=/usr/bin/newaliases}
: ${mailq_path=/usr/bin/mailq}
: ${mail_owner=postfix}
: ${setgid=no}
: ${manpages=/usr/local/man}

# Find out the location of configuration files.

test -t 0 &&
for name in install_root tempdir config_directory
do
    while :
    do
	eval echo \$n "$name: [\$$name]\  \$c"
	read ans
	case $ans in
	"") break;;
	 *) eval $name=\$ans; break;;
	esac
    done
done

# Sanity checks

for path in $tempdir $install_root $config_directory
do
   case $path in
   /*) ;;
    *) echo Error: $path should be an absolute path name. 1>&2; exit 1;;
   esac
done

# In case some systems special-case pathnames beginning with //.

case $install_root in
/) install_root=
esac

# Load defaults from existing installation.

CONFIG_DIRECTORY=$install_root$config_directory

test -f $CONFIG_DIRECTORY/main.cf && {
    for name in daemon_directory command_directory queue_directory mail_owner 
    do
	eval $name='"`bin/postconf -c $CONFIG_DIRECTORY -h $name`"' || kill $$
    done
}

if [ -f $CONFIG_DIRECTORY/install.cf ]
then
    . $CONFIG_DIRECTORY/install.cf
elif [ ! -t 0 -a -z "$install_root" ]
then
    echo Non-interactive install needs the $CONFIG_DIRECTORY/install.cf 1>&2
    echo file from a previous Postfix installation. 1>&2
    echo 1>&2
    echo Use interactive installation instead. 1>&2
    exit 1
fi

# Override default settings.

test -t 0 &&
for name in daemon_directory command_directory \
    queue_directory sendmail_path newaliases_path mailq_path mail_owner\
    setgid manpages
do
    while :
    do
	eval echo \$n "$name: [\$$name]\  \$c"
	read ans
	case $ans in
	"") break;;
	 *) eval $name=\$ans; break;;
	esac
    done
done

# Sanity checks

for path in $daemon_directory $command_directory \
    $queue_directory $sendmail_path $newaliases_path $mailq_path $manpages
do
   case $path in
   /*) ;;
   no) ;;
    *) echo Error: $path should be an absolute path name. 1>&2; exit 1;;
   esac
done

test -d $tempdir || mkdir -p $tempdir || exit 1

( rm -f $tempdir/junk && touch $tempdir/junk ) || {
    echo Error: you have no write permission to $tempdir. 1>&2
    echo Specify an alternative directory for scratch files. 1>&2
    exit 1
}

chown root $tempdir/junk >/dev/null 2>&1 || {
    echo Error: you have no permission to change file ownership. 1>&2
    exit 1
}

chown "$mail_owner" $tempdir/junk >/dev/null 2>&1 || {
    echo Error: $mail_owner needs an entry in the passwd file. 1>&2
    echo Remember, $mail_owner must have a dedicated user id and group id. 1>&2
    exit 1
}

case $setgid in
no) ;;
 *) chgrp "$setgid" $tempdir/junk >/dev/null 2>&1 || {
        echo Error: $setgid needs an entry in the group file. 1>&2
        echo Remember, $setgid must have a dedicated group id. 1>&2
        exit 1
    }
esac

rm -f $tempdir/junk

# Avoid clumsiness.

DAEMON_DIRECTORY=$install_root$daemon_directory
COMMAND_DIRECTORY=$install_root$command_directory
QUEUE_DIRECTORY=$install_root$queue_directory
SENDMAIL_PATH=$install_root$sendmail_path
NEWALIASES_PATH=$install_root$newaliases_path
MAILQ_PATH=$install_root$mailq_path
MANPAGES=$install_root$manpages

# Create any missing directories.

test -d $CONFIG_DIRECTORY || mkdir -p $CONFIG_DIRECTORY || exit 1
test -d $DAEMON_DIRECTORY || mkdir -p $DAEMON_DIRECTORY || exit 1
test -d $COMMAND_DIRECTORY || mkdir -p $COMMAND_DIRECTORY || exit 1
test -d $QUEUE_DIRECTORY || mkdir -p $QUEUE_DIRECTORY || exit 1
for path in $SENDMAIL_PATH $NEWALIASES_PATH $MAILQ_PATH
do
    dir=`echo $path|sed -e 's/[/][/]*[^/]*$//' -e 's/^$/\//'`
    test -d $dir || mkdir -p $dir || exit 1
done

# Install files. Be careful to not copy over running programs.

for file in `censored_ls libexec`
do
    compare_or_replace a+x,go-w libexec/$file $DAEMON_DIRECTORY/$file || exit 1
done

for file in `censored_ls bin | grep '^post'`
do
    compare_or_replace a+x,go-w bin/$file $COMMAND_DIRECTORY/$file || exit 1
done

test -f bin/sendmail && {
    compare_or_replace a+x,go-w bin/sendmail $SENDMAIL_PATH || exit 1
    compare_or_symlink $SENDMAIL_PATH $NEWALIASES_PATH
    compare_or_symlink $SENDMAIL_PATH $MAILQ_PATH
}

if [ -f $CONFIG_DIRECTORY/main.cf ]
then
    for file in LICENSE `cd conf; censored_ls sample*` main.cf.default
    do
	compare_or_replace a+r,go-w conf/$file $CONFIG_DIRECTORY/$file || exit 1
    done
else
    cp `censored_ls conf/*` $CONFIG_DIRECTORY || exit 1
    chmod a+r,go-w $CONFIG_DIRECTORY/* || exit 1

    test -z "$install_root" && need_config=1
fi

# Save settings.

bin/postconf -c $CONFIG_DIRECTORY -e \
    "daemon_directory = $daemon_directory" \
    "command_directory = $command_directory" \
    "queue_directory = $queue_directory" \
    "mail_owner = $mail_owner" \
|| exit 1

(echo "# This file was generated by $0"
for name in sendmail_path newaliases_path mailq_path setgid manpages
do
    eval echo $name=\$$name
done) >$tempdir/junk || exit 1
compare_or_move a+x,go-w $tempdir/junk $CONFIG_DIRECTORY/install.cf || exit 1
rm -f $tempdir/junk

# Use set-gid privileges instead of writable maildrop (optional).

test -d $QUEUE_DIRECTORY/maildrop || {
    mkdir -p $QUEUE_DIRECTORY/maildrop || exit 1
    chown $mail_owner $QUEUE_DIRECTORY/maildrop || exit 1
}

case $setgid in
no)
    chmod 1733 $QUEUE_DIRECTORY/maildrop || exit 1
    chmod g-s $COMMAND_DIRECTORY/postdrop || exit 1
    postfix_script=conf/postfix-script-nosgid
    ;;
 *) 
    chgrp $setgid $COMMAND_DIRECTORY/postdrop || exit 1
    chmod g+s $COMMAND_DIRECTORY/postdrop || exit 1
    chgrp $setgid $QUEUE_DIRECTORY/maildrop || exit 1
    chmod 1730 $QUEUE_DIRECTORY/maildrop || exit 1
    postfix_script=conf/postfix-script-sgid
    ;;
esac

compare_or_replace a+x,go-w $postfix_script $CONFIG_DIRECTORY/postfix-script ||
    exit 1

# Install manual pages (optional).

case $manpages in
no) ;;
 *) (
     cd man || exit 1
     for dir in man?
	 do test -d $MANPAGES/$dir || mkdir -p $MANPAGES/$dir || exit 1
     done
     for file in `censored_ls man?/*`
     do
	 (test -f $MANPAGES/$file && cmp -s $file $MANPAGES/$file &&
	  echo Skipping $MANPAGES/$file...) || {
	     echo Updating $MANPAGES/$file...
	     rm -f $MANPAGES/$file
	     cp $file $MANPAGES/$file || exit 1
	     chmod 644 $MANPAGES/$file || exit 1
	 }
     done
    )
esac

test "$need_config" = 1 || exit 0

ALIASES=`bin/postconf -h alias_database | sed 's/^[^:]*://'`
cat <<EOF 1>&2
    
    Warning: you still need to edit myorigin/mydestination/mynetworks
    in $CONFIG_DIRECTORY/main.cf. See also html/faq.html for dialup
    sites or for sites inside a firewalled network.
    
    BTW: Check your $ALIASES file and be sure to set up aliases
    for root and postmaster that direct mail to a real person, then
    run $NEWALIASES_PATH.

EOF

exit 0