/* $NetBSD: nca_isa.c,v 1.7 2001/04/25 17:53:35 bouyer Exp $ */ /*- * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by John M. Ruschmeyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * FreeBSD generic NCR-5380/NCR-53C400 SCSI driver * * Copyright (C) 1994 Serge Vakulenko (vak@cronyx.ru) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPERS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct nca_isa_softc { struct ncr5380_softc sc_ncr5380; /* glue to MI code */ void *sc_ih; int sc_irq; int sc_options; }; struct nca_isa_probe_data { struct device sc_dev; int sc_reg_offset; int sc_host_type; }; int nca_isa_find __P((bus_space_tag_t, bus_space_handle_t, bus_size_t, struct nca_isa_probe_data *)); int nca_isa_match __P((struct device *, struct cfdata *, void *)); void nca_isa_attach __P((struct device *, struct device *, void *)); int nca_isa_test __P((bus_space_tag_t, bus_space_handle_t, bus_size_t)); struct cfattach nca_isa_ca = { sizeof(struct nca_isa_softc), nca_isa_match, nca_isa_attach }; /* Supported controller types */ #define MAX_NCA_CONTROLLER 3 #define CTLR_NCR_5380 1 #define CTLR_NCR_53C400 2 #define CTLR_PAS16 3 #define NCA_ISA_IOSIZE 16 #define MIN_DMA_LEN 128 /* Options for disconnect/reselect, DMA, and interrupts. */ #define NCA_NO_DISCONNECT 0xff #define NCA_NO_PARITY_CHK 0xff00 #define NCA_FORCE_POLLING 0x10000 /* * Initialization and test function used by nca_isa_find() */ int nca_isa_test(iot, ioh, reg_offset) bus_space_tag_t iot; bus_space_handle_t ioh; bus_size_t reg_offset; { /* Reset the SCSI bus. */ bus_space_write_1(iot, ioh, reg_offset + C80_ICR, SCI_ICMD_RST); bus_space_write_1(iot, ioh, reg_offset + C80_ODR, 0); /* Hold reset for at least 25 microseconds. */ delay(500); /* Check that status cleared. */ if (bus_space_read_1(iot, ioh, reg_offset + C80_CSBR) != SCI_BUS_RST) { #ifdef DEBUG printf("nca_isa_find: reset status not cleared [0x%x]\n", bus_space_read_1(iot, ioh, reg_offset+C80_CSBR)); #endif bus_space_write_1(iot, ioh, reg_offset+C80_ICR, 0); return 0; } /* Clear reset. */ bus_space_write_1(iot, ioh, reg_offset + C80_ICR, 0); /* Wait a Bus Clear Delay (800 ns + bus free delay 800 ns). */ delay(16000); /* Read RPI port, resetting parity/interrupt state. */ bus_space_read_1(iot, ioh, reg_offset + C80_RPIR); /* Test BSR: parity error, interrupt request and busy loss state * should be cleared. */ if (bus_space_read_1(iot, ioh, reg_offset + C80_BSR) & (SCI_CSR_PERR | SCI_CSR_INT | SCI_CSR_DISC)) { #ifdef DEBUG printf("nca_isa_find: Parity/Interrupt/Busy not cleared [0x%x]\n", bus_space_read_1(iot, ioh, reg_offset+C80_BSR)); #endif return 0; } /* We must have found one */ return 1; } /* * Look for the board */ int nca_isa_find(iot, ioh, max_offset, epd) bus_space_tag_t iot; bus_space_handle_t ioh; bus_size_t max_offset; struct nca_isa_probe_data *epd; { /* * We check for the existence of a board by trying to initialize it, * Then sending the commands to reset the SCSI bus. * (Unfortunately, this duplicates code which is already in the MI * driver. Unavoidable as that code is not suited to this task.) * This is largely stolen from FreeBSD. */ int cont_type; bus_size_t base_offset, reg_offset = 0; /* * Some notes: * In the case of a port-mapped board, we should be pointing * right at the chip registers (if they are there at all). * For a memory-mapped card, we loop through the 16K paragraph, * 8 bytes at a time, until we either find it or run out * of region. This means we will probably be doing things like * trying to write to ROMS, etc. Hopefully, this is not a problem. */ for (base_offset = 0; base_offset < max_offset; base_offset += 0x08) { #ifdef DEBUG printf("nca_isa_find: testing offset 0x%x\n", (int)base_offset); #endif /* See if anything is there */ if (bus_space_read_1(iot, ioh, base_offset) == 0xff) continue; /* Loop around for each board type */ for (cont_type = 1; cont_type <= MAX_NCA_CONTROLLER; cont_type++) { /* Per-controller initialization */ switch (cont_type) { case CTLR_NCR_5380: /* No special inits */ reg_offset = 0; break; case CTLR_NCR_53C400: /* Reset into 5380-compat. mode */ bus_space_write_1(iot, ioh, base_offset + C400_CSR, C400_CSR_5380_ENABLE); reg_offset = C400_5380_REG_OFFSET; break; case CTLR_PAS16: /* Not currently supported */ reg_offset = 0; cont_type = 0; continue; } /* Initialize controller and bus */ if (nca_isa_test(iot, ioh, base_offset+reg_offset)) { epd->sc_reg_offset = base_offset; epd->sc_host_type = cont_type; return cont_type; /* This must be it */ } } } /* If we got here, we didn't find one */ return 0; } /* * See if there is anything at the config'd address. * If so, call the real probe to see what it is. */ int nca_isa_match(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct isa_attach_args *ia = aux; bus_space_tag_t iot = ia->ia_iot; bus_space_tag_t memt = ia->ia_memt; bus_space_handle_t ioh; struct nca_isa_probe_data epd; int rv = 0; /* See if we are looking for a port- or memory-mapped adapter */ if (ia->ia_iobase != -1) { /* Port-mapped card */ if (bus_space_map(iot, ia->ia_iobase, NCA_ISA_IOSIZE, 0, &ioh)) return 0; /* See if a 53C80/53C400 is there */ rv = nca_isa_find(iot, ioh, 0x07, &epd); bus_space_unmap(iot, ioh, NCA_ISA_IOSIZE); } else { /* Memory-mapped card */ if (bus_space_map(memt, ia->ia_maddr, 0x4000, 0, &ioh)) return 0; /* See if a 53C80/53C400 is somewhere in this para. */ rv = nca_isa_find(memt, ioh, 0x03ff0, &epd); bus_space_unmap(memt, ioh, 0x04000); } /* Adjust the attachment args if we found one */ if (rv) { if (ia->ia_iobase != -1) { /* Port-mapped */ ia->ia_iosize = NCA_ISA_IOSIZE; } else { /* Memory-mapped */ ia->ia_maddr += epd.sc_reg_offset; ia->ia_msize = NCA_ISA_IOSIZE; ia->ia_iosize = 0; } } return rv; } /* * Attach this instance, and then all the sub-devices */ void nca_isa_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct isa_attach_args *ia = aux; struct nca_isa_softc *esc = (void *)self; struct ncr5380_softc *sc = &esc->sc_ncr5380; bus_space_tag_t iot = ia->ia_iot; bus_space_handle_t ioh; struct nca_isa_probe_data epd; isa_chipset_tag_t ic = ia->ia_ic; printf("\n"); if (ia->ia_iobase != -1) { iot = ia->ia_iot; if (bus_space_map(iot, ia->ia_iobase, NCA_ISA_IOSIZE, 0, &ioh)) { printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname); return; } } else { iot = ia->ia_memt; if (bus_space_map(iot, ia->ia_maddr, NCA_ISA_IOSIZE, 0, &ioh)) { printf("%s: can't map mem space\n", sc->sc_dev.dv_xname); return; } } switch (nca_isa_find(iot, ioh, NCA_ISA_IOSIZE, &epd)) { case 0: /* Not found- must have gone away */ printf("%s: nca_isa_find failed\n", sc->sc_dev.dv_xname); return; case CTLR_NCR_5380: printf("%s: NCR 53C80 detected\n", sc->sc_dev.dv_xname); sc->sci_r0 = 0; sc->sci_r1 = 1; sc->sci_r2 = 2; sc->sci_r3 = 3; sc->sci_r4 = 4; sc->sci_r5 = 5; sc->sci_r6 = 6; sc->sci_r7 = 7; sc->sc_rev = NCR_VARIANT_NCR5380; break; case CTLR_NCR_53C400: printf("%s: NCR 53C400 detected\n", sc->sc_dev.dv_xname); sc->sci_r0 = C400_5380_REG_OFFSET + 0; sc->sci_r1 = C400_5380_REG_OFFSET + 1; sc->sci_r2 = C400_5380_REG_OFFSET + 2; sc->sci_r3 = C400_5380_REG_OFFSET + 3; sc->sci_r4 = C400_5380_REG_OFFSET + 4; sc->sci_r5 = C400_5380_REG_OFFSET + 5; sc->sci_r6 = C400_5380_REG_OFFSET + 6; sc->sci_r7 = C400_5380_REG_OFFSET + 7; sc->sc_rev = NCR_VARIANT_NCR53C400; break; case CTLR_PAS16: printf("%s: ProAudio Spectrum 16 detected\n", sc->sc_dev.dv_xname); sc->sc_rev = NCR_VARIANT_PAS16; break; } /* * MD function pointers used by the MI code. */ sc->sc_pio_out = ncr5380_pio_out; sc->sc_pio_in = ncr5380_pio_in; sc->sc_dma_alloc = NULL; sc->sc_dma_free = NULL; sc->sc_dma_setup = NULL; sc->sc_dma_start = NULL; sc->sc_dma_poll = NULL; sc->sc_dma_eop = NULL; sc->sc_dma_stop = NULL; sc->sc_intr_on = NULL; sc->sc_intr_off = NULL; if (ia->ia_irq != IRQUNK) { esc->sc_ih = isa_intr_establish(ic, ia->ia_irq, IST_EDGE, IPL_BIO, ncr5380_intr, esc); if (esc->sc_ih == NULL) { printf("nca: couldn't establish interrupt\n"); return; } } else sc->sc_flags |= NCR5380_FORCE_POLLING; /* * Support the "options" (config file flags). * Disconnect/reselect is a per-target mask. * Interrupts and DMA are per-controller. */ #if 0 esc->sc_options = 0x00000; /* no options */ #else esc->sc_options = 0x0ffff; /* all options except force poll */ #endif sc->sc_no_disconnect = (esc->sc_options & NCA_NO_DISCONNECT); sc->sc_parity_disable = (esc->sc_options & NCA_NO_PARITY_CHK) >> 8; if (esc->sc_options & NCA_FORCE_POLLING) sc->sc_flags |= NCR5380_FORCE_POLLING; sc->sc_min_dma_len = MIN_DMA_LEN; /* * Initialize fields used by the MI code */ sc->sc_regt = iot; sc->sc_regh = ioh; /* * Fill in our portion of the scsipi_adapter. */ sc->sc_adapter.adapt_request = ncr5380_scsipi_request; sc->sc_adapter.adapt_minphys = minphys; /* * Fill in our portion of the scsipi_channel. */ sc->sc_channel.chan_id = 7; /* * Initialize nca board itself. */ ncr5380_attach(sc); }