/* $NetBSD: umass.c,v 1.26 2000/03/24 22:16:42 augustss Exp $ */ /*- * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1999 MAEKAWA Masahide , * Nick Hibma * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * FreeBSD: src/sys/dev/usb/umass.c,v 1.8 1999/06/20 15:46:13 n_hibma Exp */ /* * Universal Serial Bus Mass Storage Class Control/Interrupt/Bulk (CBI) * Specification: * * http://www.usb.org/developers/data/usbmass-cbi10.pdf * * Universal Serial Bus Mass Storage Bulk Only 1.0rc4 Specification: * * http://www.usb.org/developers/data/usbmassbulk_10rc4.pdf * * Relevant parts of the old spec (Bulk-only 0.9) have been quoted * in the source. */ /* To do: * x The umass_usb_transfer routine uses synchroneous transfers. This * should be changed to async and state handling. * * x Should handle more than just Iomega USB Zip drives. There are * a fair number of USB->SCSI dongles out there. * * x Need to implement SCSI command timeout/abort handling. * * x Add support for other than Bulk. * * x Add support for other than SCSI. */ /* Authors: (with short acronyms for comments) * NWH - Nick Hibma * JRT - Jason R. Thorpe */ #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(USB_DEBUG) && !defined(UMASS_DEBUG) #define UMASS_DEBUG 1 #endif #ifdef UMASS_DEBUG #define DPRINTF(m, x) if (umassdebug & (m)) logprintf x #define UDMASS_SCSI 0x00020000 #define UDMASS_USB 0x00040000 #define UDMASS_BULK 0x00080000 #define UDMASS_ALL 0xffff0000 int umassdebug = /* UDMASS_SCSI|UDMASS_BULK|UDMASS_USB */ 0; #else #define DPRINTF(m, x) #endif typedef struct umass_softc { USBBASEDEVICE sc_dev; /* base device */ usbd_device_handle sc_udev; usbd_interface_handle sc_iface; /* the interface we use */ u_int8_t sc_subclass; /* our USB subclass */ u_int8_t sc_protocol; /* our USB protocol */ u_int8_t sc_bulkout; /* bulk-out Endpoint Address */ usbd_pipe_handle sc_bulkout_pipe; u_int8_t sc_bulkin; /* bulk-in Endpoint Address */ usbd_pipe_handle sc_bulkin_pipe; struct scsipi_link sc_link; /* prototype for devs */ struct scsipi_adapter sc_adapter; device_ptr_t sc_child; /* child device, for detach */ int sc_refcnt; char sc_dying; } umass_softc_t; #define USBD_COMMAND_FAILED USBD_INVAL /* redefine some errors for */ #define UMASS_SCSIID_HOST 0x00 #define UMASS_SCSIID_DEVICE 0x01 #define DIR_OUT 0 #define DIR_IN 1 #define DIR_NONE 2 /* Bulk-Only specific request */ #define UR_RESET 0xff #define UR_GET_MAX_LUN 0xfe /* Bulk-Only Mass Storage features */ /* Command Block Wrapper */ typedef struct { uDWord dCBWSignature; #define CBWSIGNATURE 0x43425355 uDWord dCBWTag; uDWord dCBWDataTransferLength; uByte bCBWFlags; #define CBWFLAGS_OUT 0x00 #define CBWFLAGS_IN 0x80 uByte bCBWLUN; uByte bCDBLength; uByte CBWCDB[16]; } usb_bulk_cbw_t; #define USB_BULK_CBW_SIZE 31 /* Command Status Wrapper */ typedef struct { uDWord dCSWSignature; #define CSWSIGNATURE 0x53425355 uDWord dCSWTag; uDWord dCSWDataResidue; uByte bCSWStatus; #define CSWSTATUS_GOOD 0x0 #define CSWSTATUS_FAILED 0x1 #define CSWSTATUS_PHASE 0x2 } usb_bulk_csw_t; #define USB_BULK_CSW_SIZE 13 USB_DECLARE_DRIVER(umass); /* USB related functions */ usbd_status umass_usb_transfer __P((umass_softc_t *, usbd_pipe_handle pipe, void *buf, int buflen, int flags, int *xfer_size)); /* Bulk-Only related functions */ usbd_status umass_bulk_reset __P((umass_softc_t *sc)); usbd_status umass_bulk_get_max_lun __P((umass_softc_t *sc, u_int8_t *maxlun)); usbd_status umass_bulk_transfer __P((umass_softc_t *sc, int lun, void *cmd, int cmdlen, void *data, int datalen, int dir, int *residue)); /* SCSIPI related functions */ struct scsipi_device umass_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default `done' routine */ }; void umass_scsipi_minphys __P((struct buf *)); int umass_scsipi_scsi_cmd __P((struct scsipi_xfer *)); USB_MATCH(umass) { USB_MATCH_START(umass, uaa); usb_interface_descriptor_t *id; if (uaa->iface == NULL) return(UMATCH_NONE); id = usbd_get_interface_descriptor(uaa->iface); if (id != NULL && id->bInterfaceClass == UICLASS_MASS && id->bInterfaceSubClass == UISUBCLASS_SCSI && id->bInterfaceProtocol == UIPROTO_MASS_BBB_P) return(UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO); return(UMATCH_NONE); } USB_ATTACH(umass) { USB_ATTACH_START(umass, sc, uaa); usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; char devinfo[1024]; usbd_status err; int i; u_int8_t maxlun; const char *subclass, *protocol; sc->sc_udev = uaa->device; sc->sc_iface = uaa->iface; sc->sc_bulkout_pipe = NULL; sc->sc_bulkin_pipe = NULL; usbd_devinfo(uaa->device, 0, devinfo); USB_ATTACH_SETUP; id = usbd_get_interface_descriptor(sc->sc_iface); sc->sc_subclass = id->bInterfaceSubClass; sc->sc_protocol = id->bInterfaceProtocol; switch (sc->sc_subclass) { #if 0 case UISUBCLASS_RBC: subclass = "RBC"; break; case UISUBCLASS_SFF8020I: subclass = "8020i"; break; case UISUBCLASS_QIC157: subclass = "QIC157"; break; case UISUBCLASS_UFI: subclass = "UFI"; break; case UISUBCLASS_SFF8070I: subclass = "8070i"; break; #endif case UISUBCLASS_SCSI: subclass = "SCSI"; break; default: panic("umass_attach: impossible subclass"); } switch (sc->sc_protocol) { #if 0 case UIPROTO_MASS_CBI_I: protocol = "CBI with CCI"; break; case UIPROTO_MASS_CBI: protocol = "CBI"; break; #endif case UIPROTO_MASS_BBB: /* XXX Is this really right? */ case UIPROTO_MASS_BBB_P: protocol = "Bulk-Only"; break; default: panic("umass_attach: impossible protocol"); } printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo); printf("%s: %s over %s (iclass %d/%d/%d)\n", USBDEVNAME(sc->sc_dev), subclass, protocol, id->bInterfaceClass, id->bInterfaceSubClass, id->bInterfaceProtocol); /* * A Bulk-Only Mass Storage device supports the following endpoints, * in addition to the Endpoint 0 for Control transfer that is required * of all USB devices: * (a) bulk-in endpoint. * (b) bulk-out endpoint. * * The endpoint addresses are not fixed, so we have to read them * from the device descriptors of the current interface. */ for (i = 0 ; i < id->bNumEndpoints ; i++) { ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); if (ed == NULL) { printf("%s: could not read endpoint descriptor\n", USBDEVNAME(sc->sc_dev)); USB_ATTACH_ERROR_RETURN; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { sc->sc_bulkin = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { sc->sc_bulkout = ed->bEndpointAddress; } } /* * Get the maximum LUN supported by the device. */ err = umass_bulk_get_max_lun(sc, &maxlun); if (err) { printf("%s: unable to get Max Lun: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); USB_ATTACH_ERROR_RETURN; } /* Open the bulk-in and -out pipe */ err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout, USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe); if (err) { DPRINTF(UDMASS_USB,("cannot open bulk out pipe (address %d)\n", sc->sc_bulkout)); USB_ATTACH_ERROR_RETURN; } err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin, USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe); if (err) { DPRINTF(UDMASS_USB,("cannot open bulk in pipe (address %d)\n", sc->sc_bulkin)); usbd_close_pipe(sc->sc_bulkout_pipe); USB_ATTACH_ERROR_RETURN; } /* attach the device to the SCSIPI layer */ sc->sc_adapter.scsipi_cmd = umass_scsipi_scsi_cmd; sc->sc_adapter.scsipi_minphys = umass_scsipi_minphys; sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE; sc->sc_link.adapter_softc = sc; sc->sc_link.scsipi_scsi.adapter_target = UMASS_SCSIID_HOST; sc->sc_link.adapter = &sc->sc_adapter; sc->sc_link.device = &umass_dev; sc->sc_link.openings = 1; sc->sc_link.scsipi_scsi.max_target = UMASS_SCSIID_DEVICE; /* XXX */ sc->sc_link.scsipi_scsi.max_lun = maxlun; sc->sc_link.type = BUS_SCSI; sc->sc_child = config_found(&sc->sc_dev, &sc->sc_link, scsiprint); if (sc->sc_child == NULL) { usbd_close_pipe(sc->sc_bulkout_pipe); usbd_close_pipe(sc->sc_bulkin_pipe); /* XXX Not really an error. */ USB_ATTACH_ERROR_RETURN; } usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, USBDEV(sc->sc_dev)); USB_ATTACH_SUCCESS_RETURN; } int umass_activate(self, act) struct device *self; enum devact act; { struct umass_softc *sc = (struct umass_softc *) self; int s, rv = 0; DPRINTF(UDMASS_USB, ("%s: umass_activate: %d\n", USBDEVNAME(sc->sc_dev), act)); s = splhigh(); switch (act) { case DVACT_ACTIVATE: rv = EOPNOTSUPP; break; case DVACT_DEACTIVATE: if (sc->sc_child == NULL || sc->sc_dying) break; rv = config_deactivate(sc->sc_child); DPRINTF(UDMASS_USB, ("%s: umass_activate: child " "returned %d\n", USBDEVNAME(sc->sc_dev), rv)); if (rv == 0) sc->sc_dying = 1; break; } splx(s); return (rv); } USB_DETACH(umass) { USB_DETACH_START(umass, sc); int s, rv = 0; DPRINTF(UDMASS_USB, ("%s: umass_detach: flags 0x%x\n", USBDEVNAME(sc->sc_dev), flags)); if (sc->sc_child != NULL) rv = config_detach(sc->sc_child, flags); if (rv != 0) return (rv); /* Abort the pipes to wake up any waiting processes. */ if (sc->sc_bulkin_pipe != NULL) usbd_abort_pipe(sc->sc_bulkin_pipe); if (sc->sc_bulkout_pipe != NULL) usbd_abort_pipe(sc->sc_bulkout_pipe); s = splusb(); if (--sc->sc_refcnt >= 0) { /* Wait for processes to go away. */ usb_detach_wait(USBDEV(sc->sc_dev)); } splx(s); if (sc->sc_bulkin_pipe != NULL) { usbd_close_pipe(sc->sc_bulkin_pipe); sc->sc_bulkin_pipe = NULL; } if (sc->sc_bulkout_pipe != NULL) { usbd_close_pipe(sc->sc_bulkout_pipe); sc->sc_bulkout_pipe = NULL; } usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, USBDEV(sc->sc_dev)); return (rv); } /* Performs a request over a pipe. * * flags: Can be set to USBD_SHORT_XFER_OK * xfer_size: if not null returns the nr. of bytes transferred * * If the returned error is USBD_STALLED the pipe stall has * been cleared again. */ usbd_status umass_usb_transfer(umass_softc_t *sc, usbd_pipe_handle pipe, void *buf, int buflen, int flags, int *xfer_size) { usbd_xfer_handle xfer; usbd_private_handle priv; void *buffer; int size; usbd_status err; /* A transfer is done synchronously. We create and schedule the * transfer and then wait for it to complete */ xfer = usbd_alloc_xfer(usbd_pipe2device_handle(pipe)); if (xfer == NULL) { DPRINTF(UDMASS_USB, ("%s: not enough memory\n", USBDEVNAME(sc->sc_dev))); return USBD_NOMEM; } usbd_setup_xfer(xfer, pipe, 0, buf, buflen,flags, 3000/*ms*/, NULL); err = usbd_sync_transfer(xfer); if (err) { DPRINTF(UDMASS_USB, ("%s: transfer failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err))); usbd_free_xfer(xfer); return(err); } usbd_get_xfer_status(xfer, &priv, &buffer, &size, &err); if (xfer_size != NULL) *xfer_size = size; usbd_free_xfer(xfer); return(USBD_NORMAL_COMPLETION); } usbd_status umass_bulk_get_max_lun(umass_softc_t *sc, u_int8_t *maxlun) { usbd_device_handle dev; usb_device_request_t req; usbd_status err; usb_interface_descriptor_t *id; *maxlun = 0; /* Default to 0. */ DPRINTF(UDMASS_BULK, ("%s: Get Max Lun\n", USBDEVNAME(sc->sc_dev))); usbd_interface2device_handle(sc->sc_iface, &dev); id = usbd_get_interface_descriptor(sc->sc_iface); /* The Get Max Lun command is a class-specific request. */ req.bmRequestType = UT_READ_CLASS_INTERFACE; req.bRequest = UR_GET_MAX_LUN; USETW(req.wValue, 0); USETW(req.wIndex, id->bInterfaceNumber); USETW(req.wLength, 1); err = usbd_do_request(dev, &req, maxlun); switch (err) { case USBD_NORMAL_COMPLETION: DPRINTF(UDMASS_BULK, ("%s: Max Lun %d\n", USBDEVNAME(sc->sc_dev), *maxlun)); break; case USBD_STALLED: /* * Device doesn't support Get Max Lun request. */ err = USBD_NORMAL_COMPLETION; DPRINTF(UDMASS_BULK, ("%s: Get Max Lun not supported\n", USBDEVNAME(sc->sc_dev))); break; case USBD_SHORT_XFER: /* * XXX This must mean Get Max Lun is not supported, too! */ err = USBD_NORMAL_COMPLETION; DPRINTF(UDMASS_BULK, ("%s: Get Max Lun SHORT_XFER\n", USBDEVNAME(sc->sc_dev))); break; default: printf("%s: Get Max Lun failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); /* XXX Should we port_reset the device? */ break; } return (err); } usbd_status umass_bulk_reset(umass_softc_t *sc) { usbd_device_handle dev; usb_device_request_t req; usbd_status err; usb_interface_descriptor_t *id; /* * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) * * For Reset Recovery the host shall issue in the following order: * a) a Bulk-Only Mass Storage Reset * b) a Clear Feature HALT to the Bulk-In endpoint * c) a Clear Feature HALT to the Bulk-Out endpoint */ DPRINTF(UDMASS_BULK, ("%s: Reset\n", USBDEVNAME(sc->sc_dev))); usbd_interface2device_handle(sc->sc_iface, &dev); id = usbd_get_interface_descriptor(sc->sc_iface); /* the reset command is a class specific interface request */ req.bmRequestType = UT_WRITE_CLASS_INTERFACE; req.bRequest = UR_RESET; USETW(req.wValue, 0); USETW(req.wIndex, id->bInterfaceNumber); USETW(req.wLength, 0); err = usbd_do_request(dev, &req, 0); if (err) { printf("%s: Reset failed, %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); /* XXX we should port_reset the device */ return(err); } usbd_clear_endpoint_stall(sc->sc_bulkout_pipe); usbd_clear_endpoint_stall(sc->sc_bulkin_pipe); #if 0 /* * XXX we should convert this into a more friendly delay. * Perhaps a tsleep (or is this routine run from int context?) */ DELAY(2500000 /*us*/); #else usbd_delay_ms(dev, 2500); #endif return(USBD_NORMAL_COMPLETION); } /* * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly * a data phase of datalen bytes from/to data and finally a csw read * phase. * * If the data direction was inbound a maximum of datalen bytes * is stored in the buffer pointed to by data. * The status returned is USBD_NORMAL_COMPLETION, * USBD_IOERROR, USBD_COMMAND_FAILED. * In the last case *residue is set to the residue from the CSW, * otherwise to 0. * * For the functionality of this subroutine see the Mass Storage * Spec., the graphs on page 14 and page 19 and beyong (v0.9 of * the spec). */ usbd_status umass_bulk_transfer(umass_softc_t *sc, int lun, void *cmd, int cmdlen, void *data, int datalen, int dir, int *residue) { static int dCBWtag = 42; /* tag to be used in transfers, * incremented at each transfer */ usb_bulk_cbw_t cbw; /* command block wrapper struct */ usb_bulk_csw_t csw; /* command status wrapper struct */ u_int32_t n = 0; /* number of bytes transported */ usbd_status err; #ifdef UMASS_DEBUG u_int8_t *c = cmd; /* check the given arguments */ if (data == NULL && datalen > 0) { /* no buffer for transfer */ DPRINTF(UDMASS_BULK, ("%s: no buffer, but datalen > 0 !\n", USBDEVNAME(sc->sc_dev))); return USBD_IOERROR; } DPRINTF(UDMASS_BULK, ("%s: cmd: %d bytes (0x%02x%02x%02x%02x%02x%02x%s)" ", data: %d bytes, dir: %s\n", USBDEVNAME(sc->sc_dev), cmdlen, c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6? "...":""), datalen, (dir == DIR_IN? "in":"out"))); #endif if (dir == DIR_NONE || datalen == 0) { /* make sure they correspond */ datalen = 0; dir = DIR_NONE; } if (residue != NULL) *residue = 0; /* reset residue */ /* * Determine the direction of transferring data and data length. * * dCBWDataTransferLength (datalen) : * This field indicates the number of bytes of data that the host * intends to transfer on the IN or OUT Bulk endpoint(as indicated by * the Direction bit) during the execution of this command. If this * field is set to 0, the device will expect that no data will be * transferred IN or OUT during this command, regardless of the value * of the Direction bit defined in dCBWFlags. * * dCBWFlags (dir) : * The bits of the Flags field are defined as follows: * Bits 0-6 reserved * Bit 7 Direction - this bit shall be ignored if the * dCBWDataTransferLength field is zero. * 0 = data Out from host to device * 1 = data In from device to host */ /* * Command transport phase */ /* Fill in the Command Block Wrapper */ USETDW(cbw.dCBWSignature, CBWSIGNATURE); USETDW(cbw.dCBWTag, dCBWtag++); USETDW(cbw.dCBWDataTransferLength, datalen); /* we do not check for DIR_NONE below (see text on dCBWFlags above) */ cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT); cbw.bCBWLUN = lun; cbw.bCDBLength = cmdlen; bcopy(cmd, cbw.CBWCDB, cmdlen); /* Send the CBW from host to device via bulk-out endpoint. */ err = umass_usb_transfer(sc, sc->sc_bulkout_pipe, &cbw, USB_BULK_CBW_SIZE, 0, NULL); if (err) { DPRINTF(UDMASS_BULK, ("%s: failed to send CBW\n", USBDEVNAME(sc->sc_dev))); /* If the device detects that the CBW is invalid, then the * device may STALL both bulk endpoints and require a * Bulk-Only MS Reset */ if (!sc->sc_dying) umass_bulk_reset(sc); return(USBD_IOERROR); } /* * Data transport phase (only if there is data to be sent/received) */ if (dir == DIR_IN) { /* we allow short transfers for bulk-in pipes */ err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, data, datalen, USBD_SHORT_XFER_OK, &n); if (err) DPRINTF(UDMASS_BULK, ("%s: failed to receive data, " "(%d bytes, n = %d), %s\n", USBDEVNAME(sc->sc_dev), datalen, n, usbd_errstr(err))); } else if (dir == DIR_OUT) { err = umass_usb_transfer(sc, sc->sc_bulkout_pipe, data, datalen, 0, &n); if (err) DPRINTF(UDMASS_BULK, ("%s: failed to send data, " "(%d bytes, n = %d), %s\n", USBDEVNAME(sc->sc_dev), datalen, n, usbd_errstr(err))); } if (err && err != USBD_STALLED) return(USBD_IOERROR); /* * Status transport phase */ /* Read the Command Status Wrapper via bulk-in endpoint. */ err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, &csw, USB_BULK_CSW_SIZE, 0, NULL); /* Try again if the bulk-in pipe was stalled */ if (err == USBD_STALLED) { err = usbd_clear_endpoint_stall(sc->sc_bulkin_pipe); if (!err) { err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, &csw, USB_BULK_CSW_SIZE, 0, NULL); } } if (err && err != USBD_STALLED) return(USBD_IOERROR); /* * Check the CSW for status and validity, and check for fatal errors */ /* Invalid CSW: Wrong signature or wrong tag might indicate * that the device is confused -> reset it. * Other fatal errors: STALL on read of CSW and Phase error * or unknown status. */ if (err == USBD_STALLED || UGETDW(csw.dCSWSignature) != CSWSIGNATURE || UGETDW(csw.dCSWTag) != UGETDW(cbw.dCBWTag) || csw.bCSWStatus == CSWSTATUS_PHASE || csw.bCSWStatus > CSWSTATUS_PHASE) { if (err) { printf("%s: failed to read CSW, %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); } else if (csw.bCSWStatus == CSWSTATUS_PHASE) { printf("%s: Phase Error, residue = %d, n = %d\n", USBDEVNAME(sc->sc_dev), UGETDW(csw.dCSWDataResidue), n); } else if (csw.bCSWStatus > CSWSTATUS_PHASE) { printf("%s: Unknown status %d in CSW\n", USBDEVNAME(sc->sc_dev), csw.bCSWStatus); } else { printf("%s: invalid CSW, sig = 0x%08x, tag = %d (!= %d)\n", USBDEVNAME(sc->sc_dev), UGETDW(csw.dCSWSignature), UGETDW(csw.dCSWTag), UGETDW(cbw.dCBWTag)); } umass_bulk_reset(sc); return(USBD_IOERROR); } if (csw.bCSWStatus == CSWSTATUS_FAILED) { DPRINTF(UDMASS_BULK, ("%s: Command Failed, " "residue = %d, n = %d\n", USBDEVNAME(sc->sc_dev), UGETDW(csw.dCSWDataResidue), n)); if (residue != NULL) *residue = UGETDW(csw.dCSWDataResidue); return(USBD_COMMAND_FAILED); } /* * XXX a residue not equal to 0 might indicate that something * is wrong. Does CAM high level drivers check this for us? */ return(USBD_NORMAL_COMPLETION); } /* * SCSIPI specific functions */ int umass_scsipi_scsi_cmd(xs) struct scsipi_xfer *xs; { struct scsipi_link *sc_link = xs->sc_link; struct umass_softc *sc = sc_link->adapter_softc; int residue, dir; usbd_status err; struct scsipi_sense sense_cmd; DPRINTF(UDMASS_SCSI, ("%s: umass_scsi_cmd %d:%d\n", USBDEVNAME(sc->sc_dev), sc_link->scsipi_scsi.target, sc_link->scsipi_scsi.lun)); if (sc->sc_dying) { xs->xs_status |= XS_STS_DONE; xs->error = XS_DRIVER_STUFFUP; scsipi_done(xs); if (xs->xs_control & XS_CTL_POLL) return (SUCCESSFULLY_QUEUED); else return (COMPLETE); } #ifdef UMASS_DEBUG if (sc_link->scsipi_scsi.target != UMASS_SCSIID_DEVICE) { DPRINTF(UDMASS_SCSI, ("%s: Wrong SCSI ID %d\n", USBDEVNAME(sc->sc_dev), sc_link->scsipi_scsi.target)); xs->error = XS_DRIVER_STUFFUP; return (COMPLETE); } #endif dir = DIR_NONE; if (xs->datalen) { switch (xs->xs_control & (XS_CTL_DATA_IN|XS_CTL_DATA_OUT)) { case XS_CTL_DATA_IN: dir = DIR_IN; break; case XS_CTL_DATA_OUT: dir = DIR_OUT; break; } } /* Make sure we don't lose our softc. */ sc->sc_refcnt++; err = umass_bulk_transfer(sc, sc_link->scsipi_scsi.lun, xs->cmd, xs->cmdlen, xs->data, xs->datalen, dir, &residue); /* * FAILED commands are supposed to be SCSI failed commands * and are therefore considered to be successfull CDW/CSW * transfers. PHASE errors are more serious and should return * an error to the SCSIPI system. * * XXX This is however more based on empirical evidence than on * hard proof from the Bulk-Only spec. */ if (err == USBD_NORMAL_COMPLETION) { xs->error = XS_NOERROR; } else if (sc->sc_dying) { /* We are being detached, no use talking to the device. */ xs->error = XS_DRIVER_STUFFUP; } else { DPRINTF(UDMASS_USB|UDMASS_SCSI, ("%s: bulk transfer completed " "with error %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err))); /* * Probably have a CHECK CONDITION here. Issue a * REQUEST SENSE. */ memset(&sense_cmd, 0, sizeof(sense_cmd)); sense_cmd.opcode = REQUEST_SENSE; sense_cmd.byte2 = sc_link->scsipi_scsi.lun << SCSI_CMD_LUN_SHIFT; sense_cmd.length = sizeof(xs->sense); if ((err = umass_bulk_transfer(sc, sc_link->scsipi_scsi.lun, (struct scsipi_generic *)&sense_cmd, sizeof(sense_cmd), &xs->sense, sizeof(xs->sense), DIR_IN, NULL)) != USBD_NORMAL_COMPLETION) { DPRINTF(UDMASS_SCSI, ("%s: REQUEST SENSE failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err))); xs->error = XS_DRIVER_STUFFUP; /* XXX */ } else xs->error = XS_SENSE; } xs->resid = residue; DPRINTF(UDMASS_SCSI, ("%s: umass_scsi_cmd: error = %d, resid = 0x%x\n", USBDEVNAME(sc->sc_dev), xs->error, xs->resid)); xs->xs_status |= XS_STS_DONE; scsipi_done(xs); /* We are done with the softc for now. */ if (--sc->sc_refcnt < 0) usb_detach_wakeup(USBDEV(sc->sc_dev)); /* * XXXJRT We must return successfully queued if we're an * XXXJRT `asynchronous' command, otherwise `xs' will be * XXXJRT freed twice: once in scsipi_done(), and once in * XXXJRT scsi_scsipi_cmd(). */ if ((xs->xs_control & XS_CTL_POLL) == 0) return (SUCCESSFULLY_QUEUED); return (COMPLETE); } void umass_scsipi_minphys(bp) struct buf *bp; { /* No limit here. */ minphys(bp); }