/* $NetBSD: satareg.h,v 1.3 2004/05/23 23:07:59 wiz Exp $ */ /*- * Copyright (c) 2003 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_ATA_SATAREG_H_ #define _DEV_ATA_SATAREG_H_ /* * Serial ATA register definitions. * * Reference: * * Serial ATA: High Speed Serialized AT Attachment * Revision 1.0 29-August-2001 * Serial ATA Working Group */ /* * SStatus (SCR0) -- * Serial ATA interface status register */ /* * The DET value indicates the interface device detection and * PHY state. */ #define SStatus_DET_NODEV (0x0 << 0) /* no device connected */ #define SStatus_DET_DEV_NE (0x1 << 0) /* device, but PHY comm not established */ #define SStatus_DET_DEV (0x3 << 0) /* device, PHY comm established */ #define SStatus_DET_OFFLINE (0x4 << 0) /* PHY in offline mode */ #define SStatus_DET_mask (0xf << 0) #define SStatus_DET_shift 0 /* * The SPD value indicates the negotiated interface communication * speed established. */ #define SStatus_SPD_NONE (0x0 << 4) /* no negotiated speed */ #define SStatus_SPD_G1 (0x1 << 4) /* Generation 1 (1.5Gb/s) */ #define SStatus_SPD_G2 (0x2 << 4) /* Generation 2 (3.0Gb/s) */ #define SStatus_SPD_mask (0xf << 4) #define SStatus_SPD_shift 4 /* * The IPM value indicates the current interface power managemnt * state. */ #define SStatus_IPM_NODEV (0x0 << 8) /* no device connected */ #define SStatus_IPM_ACTIVE (0x1 << 8) /* ACTIVE state */ #define SStatus_IPM_PARTIAL (0x2 << 8) /* PARTIAL pm state */ #define SStatus_IPM_SLUMBER (0x6 << 8) /* SLUMBER pm state */ #define SStatus_IPM_mask (0xf << 8) #define SStatus_IPM_shift 8 /* * SError (SCR1) -- * Serial ATA interface error register */ #define SError_ERR_I (1U << 0) /* Recovered data integrity error */ #define SError_ERR_M (1U << 1) /* Recovered communications error */ #define SError_ERR_T (1U << 8) /* Non-recovered transient data integrity error */ #define SError_ERR_C (1U << 9) /* Non-recovered persistent communication or data integrity error */ #define SError_ERR_P (1U << 10) /* Protocol error */ #define SError_ERR_E (1U << 11) /* Internal error */ #define SError_DIAG_N (1U << 16) /* PhyRdy change */ #define SError_DIAG_I (1U << 17) /* PHY internal error */ #define SError_DIAG_W (1U << 18) /* Comm Wake */ #define SError_DIAG_B (1U << 19) /* 10b to 8b decode error */ #define SError_DIAG_D (1U << 20) /* Disparity error */ #define SError_DIAG_C (1U << 21) /* CRC error */ #define SError_DIAG_H (1U << 22) /* Handshake error */ #define SError_DIAG_S (1U << 23) /* Link sequence error */ #define SError_DIAG_T (1U << 24) /* Transport state transition error */ #define SError_DIAG_F (1U << 25) /* Unrecognized FIS type */ #define SError_DIAG_X (1U << 26) /* Device Exchanged */ /* * SControl (SCR2) -- * Serial ATA interface control register */ /* * The DET field controls the host adapter device detection * and interface initialization. */ #define SControl_DET_NONE (0x0 << 0) /* No device detection or initialization action requested */ #define SControl_DET_INIT (0x1 << 0) /* Initialize interface communication (equiv of a hard reset) */ #define SControl_DET_DISABLE (0x4 << 0) /* disable interface and take PHY offline */ /* * The SPD field represents the highest allowed communication * speed the interface is allowed to negotiate when communication * is established. */ #define SControl_SPD_ANY (0x0 << 4) /* No restrictions */ #define SControl_SPD_G1 (0x1 << 4) /* Generation 1 (1.5Gb/s) */ #define SControl_SPD_G2 (0x2 << 4) /* Generation 2 (3.0Gb/s) */ /* * The IPM field represents the enabled interface power management * states that can be invoked via the Serial ATA interface power * management capabilities. */ #define SControl_IPM_ANY (0x0 << 8) /* No restrictions */ #define SControl_IPM_NOPARTIAL (0x1 << 8) /* PARTIAL disabled */ #define SControl_IPM_NOSLUMBER (0x2 << 8) /* SLUMBER disabled */ #define SControl_IPM_NONE (0x3 << 8) /* No power management */ /* * The SPM field selects a power management state. A non-zero * value written to this field causes initiation of the selected * power management state. */ #define SControl_SPM_PARTIAL (0x1 << 12) /* transition to PARTIAL */ #define SControl_SPM_SLUMBER (0x2 << 12) /* transition to SLUBMER */ #define SControl_SPM_ComWake (0x4 << 12) /* transition from PM */ /* * The PMP field identifies the selected Port Multiplier Port * for accessing the SActive register. */ #define SControl_PMP(x) ((x) << 16) #endif /* _DEV_ATA_SATAREG_H_ */