/* $NetBSD: com.c,v 1.199 2002/09/06 13:18:43 gehenna Exp $ */ /*- * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)com.c 7.5 (Berkeley) 5/16/91 */ /* * COM driver, uses National Semiconductor NS16450/NS16550AF UART * Supports automatic hardware flow control on StarTech ST16C650A UART */ #include __KERNEL_RCSID(0, "$NetBSD: com.c,v 1.199 2002/09/06 13:18:43 gehenna Exp $"); #include "opt_com.h" #include "opt_ddb.h" #include "opt_kgdb.h" #include "rnd.h" #if NRND > 0 && defined(RND_COM) #include #endif /* * Override cnmagic(9) macro before including . * We need to know if cn_check_magic triggered debugger, so set a flag. * Callers of cn_check_magic must declare int cn_trapped = 0; * XXX: this is *ugly*! */ #define cn_trap() \ do { \ console_debugger(); \ cn_trapped = 1; \ } while (/* CONSTCOND */ 0) #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef COM_HAYESP #include #endif #define com_lcr com_cfcr #include #ifdef COM_HAYESP int comprobeHAYESP(bus_space_handle_t hayespioh, struct com_softc *sc); #endif static void com_enable_debugport(struct com_softc *); void com_config(struct com_softc *); void com_shutdown(struct com_softc *); int comspeed(long, long); static u_char cflag2lcr(tcflag_t); int comparam(struct tty *, struct termios *); void comstart(struct tty *); int comhwiflow(struct tty *, int); void com_loadchannelregs(struct com_softc *); void com_hwiflow(struct com_softc *); void com_break(struct com_softc *, int); void com_modem(struct com_softc *, int); void tiocm_to_com(struct com_softc *, u_long, int); int com_to_tiocm(struct com_softc *); void com_iflush(struct com_softc *); int com_common_getc(dev_t, bus_space_tag_t, bus_space_handle_t); void com_common_putc(dev_t, bus_space_tag_t, bus_space_handle_t, int); int cominit(bus_space_tag_t, bus_addr_t, int, int, tcflag_t, bus_space_handle_t *); int comcngetc(dev_t); void comcnputc(dev_t, int); void comcnpollc(dev_t, int); #define integrate static inline #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS void comsoft(void *); #else #ifndef __NO_SOFT_SERIAL_INTERRUPT void comsoft(void); #else void comsoft(void *); struct callout comsoft_callout = CALLOUT_INITIALIZER; #endif #endif integrate void com_rxsoft(struct com_softc *, struct tty *); integrate void com_txsoft(struct com_softc *, struct tty *); integrate void com_stsoft(struct com_softc *, struct tty *); integrate void com_schedrx(struct com_softc *); void comdiag(void *); extern struct cfdriver com_cd; dev_type_open(comopen); dev_type_close(comclose); dev_type_read(comread); dev_type_write(comwrite); dev_type_ioctl(comioctl); dev_type_stop(comstop); dev_type_tty(comtty); dev_type_poll(compoll); const struct cdevsw com_cdevsw = { comopen, comclose, comread, comwrite, comioctl, comstop, comtty, compoll, nommap, D_TTY }; /* * Make this an option variable one can patch. * But be warned: this must be a power of 2! */ u_int com_rbuf_size = COM_RING_SIZE; /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ u_int com_rbuf_hiwat = (COM_RING_SIZE * 1) / 4; u_int com_rbuf_lowat = (COM_RING_SIZE * 3) / 4; static bus_addr_t comconsaddr; static bus_space_tag_t comconstag; static bus_space_handle_t comconsioh; static int comconsattached; static int comconsrate; static tcflag_t comconscflag; static struct cnm_state com_cnm_state; static int ppscap = PPS_TSFMT_TSPEC | PPS_CAPTUREASSERT | PPS_CAPTURECLEAR | #ifdef PPS_SYNC PPS_HARDPPSONASSERT | PPS_HARDPPSONCLEAR | #endif /* PPS_SYNC */ PPS_OFFSETASSERT | PPS_OFFSETCLEAR; #ifndef __HAVE_GENERIC_SOFT_INTERRUPTS #ifdef __NO_SOFT_SERIAL_INTERRUPT volatile int com_softintr_scheduled; #endif #endif #ifdef KGDB #include static bus_addr_t com_kgdb_addr; static bus_space_tag_t com_kgdb_iot; static bus_space_handle_t com_kgdb_ioh; static int com_kgdb_attached; int com_kgdb_getc(void *); void com_kgdb_putc(void *, int); #endif /* KGDB */ #define COMUNIT_MASK 0x7ffff #define COMDIALOUT_MASK 0x80000 #define COMUNIT(x) (minor(x) & COMUNIT_MASK) #define COMDIALOUT(x) (minor(x) & COMDIALOUT_MASK) #define COM_ISALIVE(sc) ((sc)->enabled != 0 && \ ISSET((sc)->sc_dev.dv_flags, DVF_ACTIVE)) #define BR BUS_SPACE_BARRIER_READ #define BW BUS_SPACE_BARRIER_WRITE #define COM_BARRIER(t, h, f) bus_space_barrier((t), (h), 0, COM_NPORTS, (f)) #if (defined(MULTIPROCESSOR) || defined(LOCKDEBUG)) && defined(COM_MPLOCK) #define COM_LOCK(sc) simple_lock(&(sc)->sc_lock) #define COM_UNLOCK(sc) simple_unlock(&(sc)->sc_lock) #else #define COM_LOCK(sc) #define COM_UNLOCK(sc) #endif int comspeed(long speed, long frequency) { #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ int x, err; #if 0 if (speed == 0) return (0); #endif if (speed <= 0) return (-1); x = divrnd(frequency / 16, speed); if (x <= 0) return (-1); err = divrnd(((quad_t)frequency) * 1000 / 16, speed * x) - 1000; if (err < 0) err = -err; if (err > COM_TOLERANCE) return (-1); return (x); #undef divrnd } #ifdef COM_DEBUG int com_debug = 0; void comstatus(struct com_softc *, char *); void comstatus(struct com_softc *sc, char *str) { struct tty *tp = sc->sc_tty; printf("%s: %s %sclocal %sdcd %sts_carr_on %sdtr %stx_stopped\n", sc->sc_dev.dv_xname, str, ISSET(tp->t_cflag, CLOCAL) ? "+" : "-", ISSET(sc->sc_msr, MSR_DCD) ? "+" : "-", ISSET(tp->t_state, TS_CARR_ON) ? "+" : "-", ISSET(sc->sc_mcr, MCR_DTR) ? "+" : "-", sc->sc_tx_stopped ? "+" : "-"); printf("%s: %s %scrtscts %scts %sts_ttstop %srts %xrx_flags\n", sc->sc_dev.dv_xname, str, ISSET(tp->t_cflag, CRTSCTS) ? "+" : "-", ISSET(sc->sc_msr, MSR_CTS) ? "+" : "-", ISSET(tp->t_state, TS_TTSTOP) ? "+" : "-", ISSET(sc->sc_mcr, MCR_RTS) ? "+" : "-", sc->sc_rx_flags); } #endif int comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) { /* force access to id reg */ bus_space_write_1(iot, ioh, com_lcr, LCR_8BITS); bus_space_write_1(iot, ioh, com_iir, 0); if ((bus_space_read_1(iot, ioh, com_lcr) != LCR_8BITS) || (bus_space_read_1(iot, ioh, com_iir) & 0x38)) return (0); return (1); } #ifdef COM_HAYESP int comprobeHAYESP(bus_space_handle_t hayespioh, struct com_softc *sc) { char val, dips; int combaselist[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; bus_space_tag_t iot = sc->sc_iot; /* * Hayes ESP cards have two iobases. One is for compatibility with * 16550 serial chips, and at the same ISA PC base addresses. The * other is for ESP-specific enhanced features, and lies at a * different addressing range entirely (0x140, 0x180, 0x280, or 0x300). */ /* Test for ESP signature */ if ((bus_space_read_1(iot, hayespioh, 0) & 0xf3) == 0) return (0); /* * ESP is present at ESP enhanced base address; unknown com port */ /* Get the dip-switch configurations */ bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_GETDIPS); dips = bus_space_read_1(iot, hayespioh, HAYESP_STATUS1); /* Determine which com port this ESP card services: bits 0,1 of */ /* dips is the port # (0-3); combaselist[val] is the com_iobase */ if (sc->sc_iobase != combaselist[dips & 0x03]) return (0); printf(": ESP"); /* Check ESP Self Test bits. */ /* Check for ESP version 2.0: bits 4,5,6 == 010 */ bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_GETTEST); val = bus_space_read_1(iot, hayespioh, HAYESP_STATUS1); /* Clear reg1 */ val = bus_space_read_1(iot, hayespioh, HAYESP_STATUS2); if ((val & 0x70) < 0x20) { printf("-old (%o)", val & 0x70); /* we do not support the necessary features */ return (0); } /* Check for ability to emulate 16550: bit 8 == 1 */ if ((dips & 0x80) == 0) { printf(" slave"); /* XXX Does slave really mean no 16550 support?? */ return (0); } /* * If we made it this far, we are a full-featured ESP v2.0 (or * better), at the correct com port address. */ SET(sc->sc_hwflags, COM_HW_HAYESP); printf(", 1024 byte fifo\n"); return (1); } #endif static void com_enable_debugport(struct com_softc *sc) { int s; /* Turn on line break interrupt, set carrier. */ s = splserial(); COM_LOCK(sc); sc->sc_ier = IER_ERXRDY; bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier); SET(sc->sc_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); COM_UNLOCK(sc); splx(s); } void com_attach_subr(struct com_softc *sc) { bus_addr_t iobase = sc->sc_iobase; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp; #ifdef COM16650 u_int8_t lcr; #endif #ifdef COM_HAYESP int hayesp_ports[] = { 0x140, 0x180, 0x280, 0x300, 0 }; int *hayespp; #endif callout_init(&sc->sc_diag_callout); #if (defined(MULTIPROCESSOR) || defined(LOCKDEBUG)) && defined(COM_MPLOCK) simple_lock_init(&sc->sc_lock); #endif /* Disable interrupts before configuring the device. */ sc->sc_ier = 0; bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); if (iot == comconstag && iobase == comconsaddr) { comconsattached = 1; /* Make sure the console is always "hardwired". */ delay(1000); /* wait for output to finish */ SET(sc->sc_hwflags, COM_HW_CONSOLE); SET(sc->sc_swflags, TIOCFLAG_SOFTCAR); } #ifdef COM_HAYESP sc->sc_prescaler = 0; /* set prescaler to x1. */ /* Look for a Hayes ESP board. */ for (hayespp = hayesp_ports; *hayespp != 0; hayespp++) { bus_space_handle_t hayespioh; #define HAYESP_NPORTS 8 /* XXX XXX XXX ??? ??? ??? */ if (bus_space_map(iot, *hayespp, HAYESP_NPORTS, 0, &hayespioh)) continue; if (comprobeHAYESP(hayespioh, sc)) { sc->sc_hayespioh = hayespioh; sc->sc_fifolen = 1024; break; } bus_space_unmap(iot, hayespioh, HAYESP_NPORTS); } /* No ESP; look for other things. */ if (!ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { #endif sc->sc_fifolen = 1; /* look for a NS 16550AF UART with FIFOs */ bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); delay(100); if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_FIFO_MASK) == IIR_FIFO_MASK) if (ISSET(bus_space_read_1(iot, ioh, com_fifo), FIFO_TRIGGER_14) == FIFO_TRIGGER_14) { SET(sc->sc_hwflags, COM_HW_FIFO); #ifdef COM16650 /* * IIR changes into the EFR if LCR is set to LCR_EERS * on 16650s. We also know IIR != 0 at this point. * Write 0 into the EFR, and read it. If the result * is 0, we have a 16650. * * Older 16650s were broken; the test to detect them * is taken from the Linux driver. Apparently * setting DLAB enable gives access to the EFR on * these chips. */ lcr = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, LCR_EERS); bus_space_write_1(iot, ioh, com_efr, 0); if (bus_space_read_1(iot, ioh, com_efr) == 0) { bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); if (bus_space_read_1(iot, ioh, com_efr) == 0) { CLR(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 0; } else { SET(sc->sc_hwflags, COM_HW_FLOW); sc->sc_fifolen = 32; } } else #endif sc->sc_fifolen = 16; #ifdef COM16650 bus_space_write_1(iot, ioh, com_lcr, lcr); if (sc->sc_fifolen == 0) printf(": st16650, broken fifo\n"); else if (sc->sc_fifolen == 32) printf(": st16650a, working fifo\n"); else #endif printf(": ns16550a, working fifo\n"); } else printf(": ns16550, broken fifo\n"); else printf(": ns8250 or ns16450, no fifo\n"); bus_space_write_1(iot, ioh, com_fifo, 0); if (ISSET(sc->sc_hwflags, COM_HW_TXFIFO_DISABLE)) { sc->sc_fifolen = 1; printf("%s: txfifo disabled\n", sc->sc_dev.dv_xname); } #ifdef COM_HAYESP } #endif tp = ttymalloc(); tp->t_oproc = comstart; tp->t_param = comparam; tp->t_hwiflow = comhwiflow; sc->sc_tty = tp; sc->sc_rbuf = malloc(com_rbuf_size << 1, M_DEVBUF, M_NOWAIT); sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; sc->sc_rbavail = com_rbuf_size; if (sc->sc_rbuf == NULL) { printf("%s: unable to allocate ring buffer\n", sc->sc_dev.dv_xname); return; } sc->sc_ebuf = sc->sc_rbuf + (com_rbuf_size << 1); tty_attach(tp); if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) SET(sc->sc_mcr, MCR_IENABLE); if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { int maj; /* locate the major number */ maj = cdevsw_lookup_major(&com_cdevsw); cn_tab->cn_dev = makedev(maj, sc->sc_dev.dv_unit); printf("%s: console\n", sc->sc_dev.dv_xname); } #ifdef KGDB /* * Allow kgdb to "take over" this port. If this is * the kgdb device, it has exclusive use. */ if (iot == com_kgdb_iot && iobase == com_kgdb_addr) { com_kgdb_attached = 1; SET(sc->sc_hwflags, COM_HW_KGDB); printf("%s: kgdb\n", sc->sc_dev.dv_xname); } #endif #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS sc->sc_si = softintr_establish(IPL_SOFTSERIAL, comsoft, sc); #endif #if NRND > 0 && defined(RND_COM) rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname, RND_TYPE_TTY, 0); #endif /* if there are no enable/disable functions, assume the device is always enabled */ if (!sc->enable) sc->enabled = 1; com_config(sc); SET(sc->sc_hwflags, COM_HW_DEV_OK); } void com_config(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* Disable interrupts before configuring the device. */ sc->sc_ier = 0; bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); #ifdef COM_HAYESP /* Look for a Hayes ESP board. */ if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { sc->sc_fifolen = 1024; /* Set 16550 compatibility mode */ bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD1, HAYESP_SETMODE); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_MODE_FIFO|HAYESP_MODE_RTS| HAYESP_MODE_SCALE); /* Set RTS/CTS flow control */ bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD1, HAYESP_SETFLOWTYPE); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_FLOW_RTS); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_FLOW_CTS); /* Set flow control levels */ bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD1, HAYESP_SETRXFLOW); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_HIBYTE(HAYESP_RXHIWMARK)); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_LOBYTE(HAYESP_RXHIWMARK)); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_HIBYTE(HAYESP_RXLOWMARK)); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, HAYESP_LOBYTE(HAYESP_RXLOWMARK)); } #endif if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB)) com_enable_debugport(sc); } int com_detach(struct device *self, int flags) { struct com_softc *sc = (struct com_softc *)self; int maj, mn; /* locate the major number */ maj = cdevsw_lookup_major(&com_cdevsw); /* Nuke the vnodes for any open instances. */ mn = self->dv_unit; vdevgone(maj, mn, mn, VCHR); mn |= COMDIALOUT_MASK; vdevgone(maj, mn, mn, VCHR); if (sc->sc_rbuf == NULL) { /* * Ring buffer allocation failed in the com_attach_subr, * only the tty is allocated, and nothing else. */ ttyfree(sc->sc_tty); return 0; } /* Free the receive buffer. */ free(sc->sc_rbuf, M_DEVBUF); /* Detach and free the tty. */ tty_detach(sc->sc_tty); ttyfree(sc->sc_tty); #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS /* Unhook the soft interrupt handler. */ softintr_disestablish(sc->sc_si); #endif #if NRND > 0 && defined(RND_COM) /* Unhook the entropy source. */ rnd_detach_source(&sc->rnd_source); #endif return (0); } int com_activate(struct device *self, enum devact act) { struct com_softc *sc = (struct com_softc *)self; int s, rv = 0; s = splserial(); COM_LOCK(sc); switch (act) { case DVACT_ACTIVATE: rv = EOPNOTSUPP; break; case DVACT_DEACTIVATE: if (sc->sc_hwflags & (COM_HW_CONSOLE|COM_HW_KGDB)) { rv = EBUSY; break; } if (sc->disable != NULL && sc->enabled != 0) { (*sc->disable)(sc); sc->enabled = 0; } break; } COM_UNLOCK(sc); splx(s); return (rv); } void com_shutdown(struct com_softc *sc) { struct tty *tp = sc->sc_tty; int s; s = splserial(); COM_LOCK(sc); /* If we were asserting flow control, then deassert it. */ SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); com_hwiflow(sc); /* Clear any break condition set with TIOCSBRK. */ com_break(sc, 0); /* Turn off PPS capture on last close. */ sc->sc_ppsmask = 0; sc->ppsparam.mode = 0; /* * Hang up if necessary. Wait a bit, so the other side has time to * notice even if we immediately open the port again. * Avoid tsleeping above splhigh(). */ if (ISSET(tp->t_cflag, HUPCL)) { com_modem(sc, 0); COM_UNLOCK(sc); splx(s); /* XXX tsleep will only timeout */ (void) tsleep(sc, TTIPRI, ttclos, hz); s = splserial(); COM_LOCK(sc); } /* Turn off interrupts. */ if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) sc->sc_ier = IER_ERXRDY; /* interrupt on break */ else sc->sc_ier = 0; bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier); if (sc->disable) { #ifdef DIAGNOSTIC if (!sc->enabled) panic("com_shutdown: not enabled?"); #endif (*sc->disable)(sc); sc->enabled = 0; } COM_UNLOCK(sc); splx(s); } int comopen(dev_t dev, int flag, int mode, struct proc *p) { struct com_softc *sc; struct tty *tp; int s, s2; int error; sc = device_lookup(&com_cd, COMUNIT(dev)); if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK) || sc->sc_rbuf == NULL) return (ENXIO); if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0) return (ENXIO); #ifdef KGDB /* * If this is the kgdb port, no other use is permitted. */ if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) return (EBUSY); #endif tp = sc->sc_tty; if (ISSET(tp->t_state, TS_ISOPEN) && ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) return (EBUSY); s = spltty(); /* * Do the following iff this is a first open. */ if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { struct termios t; tp->t_dev = dev; s2 = splserial(); COM_LOCK(sc); if (sc->enable) { if ((*sc->enable)(sc)) { COM_UNLOCK(sc); splx(s2); splx(s); printf("%s: device enable failed\n", sc->sc_dev.dv_xname); return (EIO); } sc->enabled = 1; com_config(sc); } /* Turn on interrupts. */ sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC; bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier); /* Fetch the current modem control status, needed later. */ sc->sc_msr = bus_space_read_1(sc->sc_iot, sc->sc_ioh, com_msr); /* Clear PPS capture state on first open. */ sc->sc_ppsmask = 0; sc->ppsparam.mode = 0; COM_UNLOCK(sc); splx(s2); /* * Initialize the termios status to the defaults. Add in the * sticky bits from TIOCSFLAGS. */ t.c_ispeed = 0; if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { t.c_ospeed = comconsrate; t.c_cflag = comconscflag; } else { t.c_ospeed = TTYDEF_SPEED; t.c_cflag = TTYDEF_CFLAG; } if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) SET(t.c_cflag, CLOCAL); if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) SET(t.c_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) SET(t.c_cflag, MDMBUF); /* Make sure comparam() will do something. */ tp->t_ospeed = 0; (void) comparam(tp, &t); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_lflag = TTYDEF_LFLAG; ttychars(tp); ttsetwater(tp); s2 = splserial(); COM_LOCK(sc); /* * Turn on DTR. We must always do this, even if carrier is not * present, because otherwise we'd have to use TIOCSDTR * immediately after setting CLOCAL, which applications do not * expect. We always assert DTR while the device is open * unless explicitly requested to deassert it. */ com_modem(sc, 1); /* Clear the input ring, and unblock. */ sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; sc->sc_rbavail = com_rbuf_size; com_iflush(sc); CLR(sc->sc_rx_flags, RX_ANY_BLOCK); com_hwiflow(sc); #ifdef COM_DEBUG if (com_debug) comstatus(sc, "comopen "); #endif COM_UNLOCK(sc); splx(s2); } splx(s); error = ttyopen(tp, COMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); if (error) goto bad; error = (*tp->t_linesw->l_open)(dev, tp); if (error) goto bad; return (0); bad: if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { /* * We failed to open the device, and nobody else had it opened. * Clean up the state as appropriate. */ com_shutdown(sc); } return (error); } int comclose(dev_t dev, int flag, int mode, struct proc *p) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; /* XXX This is for cons.c. */ if (!ISSET(tp->t_state, TS_ISOPEN)) return (0); (*tp->t_linesw->l_close)(tp, flag); ttyclose(tp); if (COM_ISALIVE(sc) == 0) return (0); if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { /* * Although we got a last close, the device may still be in * use; e.g. if this was the dialout node, and there are still * processes waiting for carrier on the non-dialout node. */ com_shutdown(sc); } return (0); } int comread(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; if (COM_ISALIVE(sc) == 0) return (EIO); return ((*tp->t_linesw->l_read)(tp, uio, flag)); } int comwrite(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; if (COM_ISALIVE(sc) == 0) return (EIO); return ((*tp->t_linesw->l_write)(tp, uio, flag)); } int compoll(dev_t dev, int events, struct proc *p) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; if (COM_ISALIVE(sc) == 0) return (EIO); return ((*tp->t_linesw->l_poll)(tp, events, p)); } struct tty * comtty(dev_t dev) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; return (tp); } int comioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(dev)); struct tty *tp = sc->sc_tty; int error; int s; if (COM_ISALIVE(sc) == 0) return (EIO); error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, p); if (error != EPASSTHROUGH) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error != EPASSTHROUGH) return (error); error = 0; s = splserial(); COM_LOCK(sc); switch (cmd) { case TIOCSBRK: com_break(sc, 1); break; case TIOCCBRK: com_break(sc, 0); break; case TIOCSDTR: com_modem(sc, 1); break; case TIOCCDTR: com_modem(sc, 0); break; case TIOCGFLAGS: *(int *)data = sc->sc_swflags; break; case TIOCSFLAGS: error = suser(p->p_ucred, &p->p_acflag); if (error) break; sc->sc_swflags = *(int *)data; break; case TIOCMSET: case TIOCMBIS: case TIOCMBIC: tiocm_to_com(sc, cmd, *(int *)data); break; case TIOCMGET: *(int *)data = com_to_tiocm(sc); break; case PPS_IOC_CREATE: break; case PPS_IOC_DESTROY: break; case PPS_IOC_GETPARAMS: { pps_params_t *pp; pp = (pps_params_t *)data; *pp = sc->ppsparam; break; } case PPS_IOC_SETPARAMS: { pps_params_t *pp; int mode; pp = (pps_params_t *)data; if (pp->mode & ~ppscap) { error = EINVAL; break; } sc->ppsparam = *pp; /* * Compute msr masks from user-specified timestamp state. */ mode = sc->ppsparam.mode; #ifdef PPS_SYNC if (mode & PPS_HARDPPSONASSERT) { mode |= PPS_CAPTUREASSERT; /* XXX revoke any previous HARDPPS source */ } if (mode & PPS_HARDPPSONCLEAR) { mode |= PPS_CAPTURECLEAR; /* XXX revoke any previous HARDPPS source */ } #endif /* PPS_SYNC */ switch (mode & PPS_CAPTUREBOTH) { case 0: sc->sc_ppsmask = 0; break; case PPS_CAPTUREASSERT: sc->sc_ppsmask = MSR_DCD; sc->sc_ppsassert = MSR_DCD; sc->sc_ppsclear = -1; break; case PPS_CAPTURECLEAR: sc->sc_ppsmask = MSR_DCD; sc->sc_ppsassert = -1; sc->sc_ppsclear = 0; break; case PPS_CAPTUREBOTH: sc->sc_ppsmask = MSR_DCD; sc->sc_ppsassert = MSR_DCD; sc->sc_ppsclear = 0; break; default: error = EINVAL; break; } break; } case PPS_IOC_GETCAP: *(int*)data = ppscap; break; case PPS_IOC_FETCH: { pps_info_t *pi; pi = (pps_info_t *)data; *pi = sc->ppsinfo; break; } case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */ /* * Some GPS clocks models use the falling rather than * rising edge as the on-the-second signal. * The old API has no way to specify PPS polarity. */ sc->sc_ppsmask = MSR_DCD; #ifndef PPS_TRAILING_EDGE sc->sc_ppsassert = MSR_DCD; sc->sc_ppsclear = -1; TIMESPEC_TO_TIMEVAL((struct timeval *)data, &sc->ppsinfo.assert_timestamp); #else sc->sc_ppsassert = -1 sc->sc_ppsclear = 0; TIMESPEC_TO_TIMEVAL((struct timeval *)data, &sc->ppsinfo.clear_timestamp); #endif break; default: error = EPASSTHROUGH; break; } COM_UNLOCK(sc); splx(s); #ifdef COM_DEBUG if (com_debug) comstatus(sc, "comioctl "); #endif return (error); } integrate void com_schedrx(struct com_softc *sc) { sc->sc_rx_ready = 1; /* Wake up the poller. */ #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS softintr_schedule(sc->sc_si); #else #ifndef __NO_SOFT_SERIAL_INTERRUPT setsoftserial(); #else if (!com_softintr_scheduled) { com_softintr_scheduled = 1; callout_reset(&comsoft_callout, 1, comsoft, NULL); } #endif #endif } void com_break(struct com_softc *sc, int onoff) { if (onoff) SET(sc->sc_lcr, LCR_SBREAK); else CLR(sc->sc_lcr, LCR_SBREAK); if (!sc->sc_heldchange) { if (sc->sc_tx_busy) { sc->sc_heldtbc = sc->sc_tbc; sc->sc_tbc = 0; sc->sc_heldchange = 1; } else com_loadchannelregs(sc); } } void com_modem(struct com_softc *sc, int onoff) { if (sc->sc_mcr_dtr == 0) return; if (onoff) SET(sc->sc_mcr, sc->sc_mcr_dtr); else CLR(sc->sc_mcr, sc->sc_mcr_dtr); if (!sc->sc_heldchange) { if (sc->sc_tx_busy) { sc->sc_heldtbc = sc->sc_tbc; sc->sc_tbc = 0; sc->sc_heldchange = 1; } else com_loadchannelregs(sc); } } void tiocm_to_com(struct com_softc *sc, u_long how, int ttybits) { u_char combits; combits = 0; if (ISSET(ttybits, TIOCM_DTR)) SET(combits, MCR_DTR); if (ISSET(ttybits, TIOCM_RTS)) SET(combits, MCR_RTS); switch (how) { case TIOCMBIC: CLR(sc->sc_mcr, combits); break; case TIOCMBIS: SET(sc->sc_mcr, combits); break; case TIOCMSET: CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); SET(sc->sc_mcr, combits); break; } if (!sc->sc_heldchange) { if (sc->sc_tx_busy) { sc->sc_heldtbc = sc->sc_tbc; sc->sc_tbc = 0; sc->sc_heldchange = 1; } else com_loadchannelregs(sc); } } int com_to_tiocm(struct com_softc *sc) { u_char combits; int ttybits = 0; combits = sc->sc_mcr; if (ISSET(combits, MCR_DTR)) SET(ttybits, TIOCM_DTR); if (ISSET(combits, MCR_RTS)) SET(ttybits, TIOCM_RTS); combits = sc->sc_msr; if (ISSET(combits, MSR_DCD)) SET(ttybits, TIOCM_CD); if (ISSET(combits, MSR_CTS)) SET(ttybits, TIOCM_CTS); if (ISSET(combits, MSR_DSR)) SET(ttybits, TIOCM_DSR); if (ISSET(combits, MSR_RI | MSR_TERI)) SET(ttybits, TIOCM_RI); if (sc->sc_ier != 0) SET(ttybits, TIOCM_LE); return (ttybits); } static u_char cflag2lcr(tcflag_t cflag) { u_char lcr = 0; switch (ISSET(cflag, CSIZE)) { case CS5: SET(lcr, LCR_5BITS); break; case CS6: SET(lcr, LCR_6BITS); break; case CS7: SET(lcr, LCR_7BITS); break; case CS8: SET(lcr, LCR_8BITS); break; } if (ISSET(cflag, PARENB)) { SET(lcr, LCR_PENAB); if (!ISSET(cflag, PARODD)) SET(lcr, LCR_PEVEN); } if (ISSET(cflag, CSTOPB)) SET(lcr, LCR_STOPB); return (lcr); } int comparam(struct tty *tp, struct termios *t) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(tp->t_dev)); int ospeed; u_char lcr; int s; if (COM_ISALIVE(sc) == 0) return (EIO); #ifdef COM_HAYESP if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { int prescaler, speed; /* * Calculate UART clock prescaler. It should be in * range of 0 .. 3. */ for (prescaler = 0, speed = t->c_ospeed; prescaler < 4; prescaler++, speed /= 2) if ((ospeed = comspeed(speed, sc->sc_frequency)) > 0) break; if (prescaler == 4) return (EINVAL); sc->sc_prescaler = prescaler; } else #endif ospeed = comspeed(t->c_ospeed, sc->sc_frequency); /* Check requested parameters. */ if (ospeed < 0) return (EINVAL); if (t->c_ispeed && t->c_ispeed != t->c_ospeed) return (EINVAL); /* * For the console, always force CLOCAL and !HUPCL, so that the port * is always active. */ if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { SET(t->c_cflag, CLOCAL); CLR(t->c_cflag, HUPCL); } /* * If there were no changes, don't do anything. This avoids dropping * input and improves performance when all we did was frob things like * VMIN and VTIME. */ if (tp->t_ospeed == t->c_ospeed && tp->t_cflag == t->c_cflag) return (0); lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); s = splserial(); COM_LOCK(sc); sc->sc_lcr = lcr; /* * If we're not in a mode that assumes a connection is present, then * ignore carrier changes. */ if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) sc->sc_msr_dcd = 0; else sc->sc_msr_dcd = MSR_DCD; /* * Set the flow control pins depending on the current flow control * mode. */ if (ISSET(t->c_cflag, CRTSCTS)) { sc->sc_mcr_dtr = MCR_DTR; sc->sc_mcr_rts = MCR_RTS; sc->sc_msr_cts = MSR_CTS; sc->sc_efr = EFR_AUTORTS | EFR_AUTOCTS; } else if (ISSET(t->c_cflag, MDMBUF)) { /* * For DTR/DCD flow control, make sure we don't toggle DTR for * carrier detection. */ sc->sc_mcr_dtr = 0; sc->sc_mcr_rts = MCR_DTR; sc->sc_msr_cts = MSR_DCD; sc->sc_efr = 0; } else { /* * If no flow control, then always set RTS. This will make * the other side happy if it mistakenly thinks we're doing * RTS/CTS flow control. */ sc->sc_mcr_dtr = MCR_DTR | MCR_RTS; sc->sc_mcr_rts = 0; sc->sc_msr_cts = 0; sc->sc_efr = 0; if (ISSET(sc->sc_mcr, MCR_DTR)) SET(sc->sc_mcr, MCR_RTS); else CLR(sc->sc_mcr, MCR_RTS); } sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd; #if 0 if (ospeed == 0) CLR(sc->sc_mcr, sc->sc_mcr_dtr); else SET(sc->sc_mcr, sc->sc_mcr_dtr); #endif sc->sc_dlbl = ospeed; sc->sc_dlbh = ospeed >> 8; /* * Set the FIFO threshold based on the receive speed. * * * If it's a low speed, it's probably a mouse or some other * interactive device, so set the threshold low. * * If it's a high speed, trim the trigger level down to prevent * overflows. * * Otherwise set it a bit higher. */ if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) sc->sc_fifo = FIFO_DMA_MODE | FIFO_ENABLE | FIFO_TRIGGER_8; else if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) sc->sc_fifo = FIFO_ENABLE | (t->c_ospeed <= 1200 ? FIFO_TRIGGER_1 : t->c_ospeed <= 38400 ? FIFO_TRIGGER_8 : FIFO_TRIGGER_4); else sc->sc_fifo = 0; /* And copy to tty. */ tp->t_ispeed = 0; tp->t_ospeed = t->c_ospeed; tp->t_cflag = t->c_cflag; if (!sc->sc_heldchange) { if (sc->sc_tx_busy) { sc->sc_heldtbc = sc->sc_tbc; sc->sc_tbc = 0; sc->sc_heldchange = 1; } else com_loadchannelregs(sc); } if (!ISSET(t->c_cflag, CHWFLOW)) { /* Disable the high water mark. */ sc->sc_r_hiwat = 0; sc->sc_r_lowat = 0; if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); com_schedrx(sc); } if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { CLR(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); com_hwiflow(sc); } } else { sc->sc_r_hiwat = com_rbuf_hiwat; sc->sc_r_lowat = com_rbuf_lowat; } COM_UNLOCK(sc); splx(s); /* * Update the tty layer's idea of the carrier bit, in case we changed * CLOCAL or MDMBUF. We don't hang up here; we only do that by * explicit request. */ (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, MSR_DCD)); #ifdef COM_DEBUG if (com_debug) comstatus(sc, "comparam "); #endif if (!ISSET(t->c_cflag, CHWFLOW)) { if (sc->sc_tx_stopped) { sc->sc_tx_stopped = 0; comstart(tp); } } return (0); } void com_iflush(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; #ifdef DIAGNOSTIC int reg; #endif int timo; #ifdef DIAGNOSTIC reg = 0xffff; #endif timo = 50000; /* flush any pending I/O */ while (ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY) && --timo) #ifdef DIAGNOSTIC reg = #else (void) #endif bus_space_read_1(iot, ioh, com_data); #ifdef DIAGNOSTIC if (!timo) printf("%s: com_iflush timeout %02x\n", sc->sc_dev.dv_xname, reg); #endif } void com_loadchannelregs(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* XXXXX necessary? */ com_iflush(sc); bus_space_write_1(iot, ioh, com_ier, 0); if (ISSET(sc->sc_hwflags, COM_HW_FLOW)) { bus_space_write_1(iot, ioh, com_lcr, LCR_EERS); bus_space_write_1(iot, ioh, com_efr, sc->sc_efr); } bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr | LCR_DLAB); bus_space_write_1(iot, ioh, com_dlbl, sc->sc_dlbl); bus_space_write_1(iot, ioh, com_dlbh, sc->sc_dlbh); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr_active = sc->sc_mcr); bus_space_write_1(iot, ioh, com_fifo, sc->sc_fifo); #ifdef COM_HAYESP if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD1, HAYESP_SETPRESCALER); bus_space_write_1(iot, sc->sc_hayespioh, HAYESP_CMD2, sc->sc_prescaler); } #endif bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } int comhwiflow(struct tty *tp, int block) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(tp->t_dev)); int s; if (COM_ISALIVE(sc) == 0) return (0); if (sc->sc_mcr_rts == 0) return (0); s = splserial(); COM_LOCK(sc); if (block) { if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { SET(sc->sc_rx_flags, RX_TTY_BLOCKED); com_hwiflow(sc); } } else { if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); com_schedrx(sc); } if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { CLR(sc->sc_rx_flags, RX_TTY_BLOCKED); com_hwiflow(sc); } } COM_UNLOCK(sc); splx(s); return (1); } /* * (un)block input via hw flowcontrol */ void com_hwiflow(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (sc->sc_mcr_rts == 0) return; if (ISSET(sc->sc_rx_flags, RX_ANY_BLOCK)) { CLR(sc->sc_mcr, sc->sc_mcr_rts); CLR(sc->sc_mcr_active, sc->sc_mcr_rts); } else { SET(sc->sc_mcr, sc->sc_mcr_rts); SET(sc->sc_mcr_active, sc->sc_mcr_rts); } bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr_active); } void comstart(struct tty *tp) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(tp->t_dev)); bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s; if (COM_ISALIVE(sc) == 0) return; s = spltty(); if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) goto out; if (sc->sc_tx_stopped) goto out; if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup(&tp->t_outq); } selwakeup(&tp->t_wsel); if (tp->t_outq.c_cc == 0) goto out; } /* Grab the first contiguous region of buffer space. */ { u_char *tba; int tbc; tba = tp->t_outq.c_cf; tbc = ndqb(&tp->t_outq, 0); (void)splserial(); COM_LOCK(sc); sc->sc_tba = tba; sc->sc_tbc = tbc; } SET(tp->t_state, TS_BUSY); sc->sc_tx_busy = 1; /* Enable transmit completion interrupts if necessary. */ if (!ISSET(sc->sc_ier, IER_ETXRDY)) { SET(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } /* Output the first chunk of the contiguous buffer. */ if (!ISSET(sc->sc_hwflags, COM_HW_NO_TXPRELOAD)) { int n; n = sc->sc_tbc; if (n > sc->sc_fifolen) n = sc->sc_fifolen; bus_space_write_multi_1(iot, ioh, com_data, sc->sc_tba, n); sc->sc_tbc -= n; sc->sc_tba += n; } COM_UNLOCK(sc); out: splx(s); return; } /* * Stop output on a line. */ void comstop(struct tty *tp, int flag) { struct com_softc *sc = device_lookup(&com_cd, COMUNIT(tp->t_dev)); int s; s = splserial(); COM_LOCK(sc); if (ISSET(tp->t_state, TS_BUSY)) { /* Stop transmitting at the next chunk. */ sc->sc_tbc = 0; sc->sc_heldtbc = 0; if (!ISSET(tp->t_state, TS_TTSTOP)) SET(tp->t_state, TS_FLUSH); } COM_UNLOCK(sc); splx(s); } void comdiag(void *arg) { struct com_softc *sc = arg; int overflows, floods; int s; s = splserial(); COM_LOCK(sc); overflows = sc->sc_overflows; sc->sc_overflows = 0; floods = sc->sc_floods; sc->sc_floods = 0; sc->sc_errors = 0; COM_UNLOCK(sc); splx(s); log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n", sc->sc_dev.dv_xname, overflows, overflows == 1 ? "" : "s", floods, floods == 1 ? "" : "s"); } integrate void com_rxsoft(struct com_softc *sc, struct tty *tp) { int (*rint)(int, struct tty *) = tp->t_linesw->l_rint; u_char *get, *end; u_int cc, scc; u_char lsr; int code; int s; end = sc->sc_ebuf; get = sc->sc_rbget; scc = cc = com_rbuf_size - sc->sc_rbavail; if (cc == com_rbuf_size) { sc->sc_floods++; if (sc->sc_errors++ == 0) callout_reset(&sc->sc_diag_callout, 60 * hz, comdiag, sc); } while (cc) { code = get[0]; lsr = get[1]; if (ISSET(lsr, LSR_OE | LSR_BI | LSR_FE | LSR_PE)) { if (ISSET(lsr, LSR_OE)) { sc->sc_overflows++; if (sc->sc_errors++ == 0) callout_reset(&sc->sc_diag_callout, 60 * hz, comdiag, sc); } if (ISSET(lsr, LSR_BI | LSR_FE)) SET(code, TTY_FE); if (ISSET(lsr, LSR_PE)) SET(code, TTY_PE); } if ((*rint)(code, tp) == -1) { /* * The line discipline's buffer is out of space. */ if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { /* * We're either not using flow control, or the * line discipline didn't tell us to block for * some reason. Either way, we have no way to * know when there's more space available, so * just drop the rest of the data. */ get += cc << 1; if (get >= end) get -= com_rbuf_size << 1; cc = 0; } else { /* * Don't schedule any more receive processing * until the line discipline tells us there's * space available (through comhwiflow()). * Leave the rest of the data in the input * buffer. */ SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED); } break; } get += 2; if (get >= end) get = sc->sc_rbuf; cc--; } if (cc != scc) { sc->sc_rbget = get; s = splserial(); COM_LOCK(sc); cc = sc->sc_rbavail += scc - cc; /* Buffers should be ok again, release possible block. */ if (cc >= sc->sc_r_lowat) { if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); SET(sc->sc_ier, IER_ERXRDY); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier); } if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) { CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED); com_hwiflow(sc); } } COM_UNLOCK(sc); splx(s); } } integrate void com_txsoft(struct com_softc *sc, struct tty *tp) { CLR(tp->t_state, TS_BUSY); if (ISSET(tp->t_state, TS_FLUSH)) CLR(tp->t_state, TS_FLUSH); else ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); (*tp->t_linesw->l_start)(tp); } integrate void com_stsoft(struct com_softc *sc, struct tty *tp) { u_char msr, delta; int s; s = splserial(); COM_LOCK(sc); msr = sc->sc_msr; delta = sc->sc_msr_delta; sc->sc_msr_delta = 0; COM_UNLOCK(sc); splx(s); if (ISSET(delta, sc->sc_msr_dcd)) { /* * Inform the tty layer that carrier detect changed. */ (void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, MSR_DCD)); } if (ISSET(delta, sc->sc_msr_cts)) { /* Block or unblock output according to flow control. */ if (ISSET(msr, sc->sc_msr_cts)) { sc->sc_tx_stopped = 0; (*tp->t_linesw->l_start)(tp); } else { sc->sc_tx_stopped = 1; } } #ifdef COM_DEBUG if (com_debug) comstatus(sc, "com_stsoft"); #endif } #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS void comsoft(void *arg) { struct com_softc *sc = arg; struct tty *tp; if (COM_ISALIVE(sc) == 0) return; { #else void #ifndef __NO_SOFT_SERIAL_INTERRUPT comsoft(void) #else comsoft(void *arg) #endif { struct com_softc *sc; struct tty *tp; int unit; #ifdef __NO_SOFT_SERIAL_INTERRUPT int s; s = splsoftserial(); com_softintr_scheduled = 0; #endif for (unit = 0; unit < com_cd.cd_ndevs; unit++) { sc = device_lookup(&com_cd, unit); if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK)) continue; if (COM_ISALIVE(sc) == 0) continue; tp = sc->sc_tty; if (tp == NULL) continue; if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) continue; #endif tp = sc->sc_tty; if (sc->sc_rx_ready) { sc->sc_rx_ready = 0; com_rxsoft(sc, tp); } if (sc->sc_st_check) { sc->sc_st_check = 0; com_stsoft(sc, tp); } if (sc->sc_tx_done) { sc->sc_tx_done = 0; com_txsoft(sc, tp); } } #ifndef __HAVE_GENERIC_SOFT_INTERRUPTS #ifdef __NO_SOFT_SERIAL_INTERRUPT splx(s); #endif #endif } #ifdef __ALIGN_BRACKET_LEVEL_FOR_CTAGS /* there has got to be a better way to do comsoft() */ }} #endif int comintr(void *arg) { struct com_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char *put, *end; u_int cc; u_char lsr, iir; if (COM_ISALIVE(sc) == 0) return (0); COM_LOCK(sc); iir = bus_space_read_1(iot, ioh, com_iir); if (ISSET(iir, IIR_NOPEND)) { COM_UNLOCK(sc); return (0); } end = sc->sc_ebuf; put = sc->sc_rbput; cc = sc->sc_rbavail; again: do { u_char msr, delta; lsr = bus_space_read_1(iot, ioh, com_lsr); if (ISSET(lsr, LSR_BI)) { int cn_trapped = 0; cn_check_magic(sc->sc_tty->t_dev, CNC_BREAK, com_cnm_state); if (cn_trapped) continue; #if defined(KGDB) if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) { kgdb_connect(1); continue; } #endif } if (ISSET(lsr, LSR_RCV_MASK) && !ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { while (cc > 0) { int cn_trapped = 0; put[0] = bus_space_read_1(iot, ioh, com_data); put[1] = lsr; cn_check_magic(sc->sc_tty->t_dev, put[0], com_cnm_state); if (cn_trapped) { lsr = bus_space_read_1(iot, ioh, com_lsr); if (!ISSET(lsr, LSR_RCV_MASK)) break; continue; } put += 2; if (put >= end) put = sc->sc_rbuf; cc--; lsr = bus_space_read_1(iot, ioh, com_lsr); if (!ISSET(lsr, LSR_RCV_MASK)) break; } /* * Current string of incoming characters ended because * no more data was available or we ran out of space. * Schedule a receive event if any data was received. * If we're out of space, turn off receive interrupts. */ sc->sc_rbput = put; sc->sc_rbavail = cc; if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) sc->sc_rx_ready = 1; /* * See if we are in danger of overflowing a buffer. If * so, use hardware flow control to ease the pressure. */ if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) && cc < sc->sc_r_hiwat) { SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); com_hwiflow(sc); } /* * If we're out of space, disable receive interrupts * until the queue has drained a bit. */ if (!cc) { SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); CLR(sc->sc_ier, IER_ERXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } } else { if ((iir & IIR_IMASK) == IIR_RXRDY) { bus_space_write_1(iot, ioh, com_ier, 0); delay(10); bus_space_write_1(iot, ioh, com_ier,sc->sc_ier); continue; } } msr = bus_space_read_1(iot, ioh, com_msr); delta = msr ^ sc->sc_msr; sc->sc_msr = msr; /* * Pulse-per-second (PSS) signals on edge of DCD? * Process these even if line discipline is ignoring DCD. */ if (delta & sc->sc_ppsmask) { struct timeval tv; if ((msr & sc->sc_ppsmask) == sc->sc_ppsassert) { /* XXX nanotime() */ microtime(&tv); TIMEVAL_TO_TIMESPEC(&tv, &sc->ppsinfo.assert_timestamp); if (sc->ppsparam.mode & PPS_OFFSETASSERT) { timespecadd(&sc->ppsinfo.assert_timestamp, &sc->ppsparam.assert_offset, &sc->ppsinfo.assert_timestamp); } #ifdef PPS_SYNC if (sc->ppsparam.mode & PPS_HARDPPSONASSERT) hardpps(&tv, tv.tv_usec); #endif sc->ppsinfo.assert_sequence++; sc->ppsinfo.current_mode = sc->ppsparam.mode; } else if ((msr & sc->sc_ppsmask) == sc->sc_ppsclear) { /* XXX nanotime() */ microtime(&tv); TIMEVAL_TO_TIMESPEC(&tv, &sc->ppsinfo.clear_timestamp); if (sc->ppsparam.mode & PPS_OFFSETCLEAR) { timespecadd(&sc->ppsinfo.clear_timestamp, &sc->ppsparam.clear_offset, &sc->ppsinfo.clear_timestamp); } #ifdef PPS_SYNC if (sc->ppsparam.mode & PPS_HARDPPSONCLEAR) hardpps(&tv, tv.tv_usec); #endif sc->ppsinfo.clear_sequence++; sc->ppsinfo.current_mode = sc->ppsparam.mode; } } /* * Process normal status changes */ if (ISSET(delta, sc->sc_msr_mask)) { SET(sc->sc_msr_delta, delta); /* * Stop output immediately if we lose the output * flow control signal or carrier detect. */ if (ISSET(~msr, sc->sc_msr_mask)) { sc->sc_tbc = 0; sc->sc_heldtbc = 0; #ifdef COM_DEBUG if (com_debug) comstatus(sc, "comintr "); #endif } sc->sc_st_check = 1; } } while (ISSET((iir = bus_space_read_1(iot, ioh, com_iir)), IIR_RXRDY) || ((iir & IIR_IMASK) == 0)); /* * Done handling any receive interrupts. See if data can be * transmitted as well. Schedule tx done event if no data left * and tty was marked busy. */ if (ISSET(lsr, LSR_TXRDY)) { /* * If we've delayed a parameter change, do it now, and restart * output. */ if (sc->sc_heldchange) { com_loadchannelregs(sc); sc->sc_heldchange = 0; sc->sc_tbc = sc->sc_heldtbc; sc->sc_heldtbc = 0; } /* Output the next chunk of the contiguous buffer, if any. */ if (sc->sc_tbc > 0) { int n; n = sc->sc_tbc; if (n > sc->sc_fifolen) n = sc->sc_fifolen; bus_space_write_multi_1(iot, ioh, com_data, sc->sc_tba, n); sc->sc_tbc -= n; sc->sc_tba += n; } else { /* Disable transmit completion interrupts if necessary. */ if (ISSET(sc->sc_ier, IER_ETXRDY)) { CLR(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } if (sc->sc_tx_busy) { sc->sc_tx_busy = 0; sc->sc_tx_done = 1; } } } if (!ISSET((iir = bus_space_read_1(iot, ioh, com_iir)), IIR_NOPEND)) goto again; COM_UNLOCK(sc); /* Wake up the poller. */ #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS softintr_schedule(sc->sc_si); #else #ifndef __NO_SOFT_SERIAL_INTERRUPT setsoftserial(); #else if (!com_softintr_scheduled) { com_softintr_scheduled = 1; callout_reset(&comsoft_callout, 1, comsoft, NULL); } #endif #endif #if NRND > 0 && defined(RND_COM) rnd_add_uint32(&sc->rnd_source, iir | lsr); #endif return (1); } /* * The following functions are polled getc and putc routines, shared * by the console and kgdb glue. * * The read-ahead code is so that you can detect pending in-band * cn_magic in polled mode while doing output rather than having to * wait until the kernel decides it needs input. */ #define MAX_READAHEAD 20 static int com_readahead[MAX_READAHEAD]; static int com_readaheadcount = 0; int com_common_getc(dev_t dev, bus_space_tag_t iot, bus_space_handle_t ioh) { int s = splserial(); u_char stat, c; /* got a character from reading things earlier */ if (com_readaheadcount > 0) { int i; c = com_readahead[0]; for (i = 1; i < com_readaheadcount; i++) { com_readahead[i-1] = com_readahead[i]; } com_readaheadcount--; splx(s); return (c); } /* block until a character becomes available */ while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) ; c = bus_space_read_1(iot, ioh, com_data); stat = bus_space_read_1(iot, ioh, com_iir); { int cn_trapped = 0; /* unused */ #ifdef DDB extern int db_active; if (!db_active) #endif cn_check_magic(dev, c, com_cnm_state); } splx(s); return (c); } void com_common_putc(dev_t dev, bus_space_tag_t iot, bus_space_handle_t ioh, int c) { int s = splserial(); int timo; int cin, stat; if (com_readaheadcount < MAX_READAHEAD && ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) { int cn_trapped = 0; cin = bus_space_read_1(iot, ioh, com_data); stat = bus_space_read_1(iot, ioh, com_iir); cn_check_magic(dev, cin, com_cnm_state); com_readahead[com_readaheadcount++] = cin; } /* wait for any pending transmission to finish */ timo = 150000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) continue; bus_space_write_1(iot, ioh, com_data, c); COM_BARRIER(iot, ioh, BR | BW); /* wait for this transmission to complete */ timo = 1500000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) continue; splx(s); } /* * Initialize UART for use as console or KGDB line. */ int cominit(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag, bus_space_handle_t *iohp) { bus_space_handle_t ioh; if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) return (ENOMEM); /* ??? */ bus_space_write_1(iot, ioh, com_lcr, LCR_EERS); bus_space_write_1(iot, ioh, com_efr, 0); bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB); rate = comspeed(rate, frequency); bus_space_write_1(iot, ioh, com_dlbl, rate); bus_space_write_1(iot, ioh, com_dlbh, rate >> 8); bus_space_write_1(iot, ioh, com_lcr, cflag2lcr(cflag)); bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); bus_space_write_1(iot, ioh, com_ier, 0); *iohp = ioh; return (0); } /* * Following are all routines needed for COM to act as console */ struct consdev comcons = { NULL, NULL, comcngetc, comcnputc, comcnpollc, NULL, NODEV, CN_NORMAL }; int comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag) { int res; res = cominit(iot, iobase, rate, frequency, cflag, &comconsioh); if (res) return (res); cn_tab = &comcons; cn_init_magic(&com_cnm_state); cn_set_magic("\047\001"); /* default magic is BREAK */ comconstag = iot; comconsaddr = iobase; comconsrate = rate; comconscflag = cflag; return (0); } int comcngetc(dev_t dev) { return (com_common_getc(dev, comconstag, comconsioh)); } /* * Console kernel output character routine. */ void comcnputc(dev_t dev, int c) { com_common_putc(dev, comconstag, comconsioh, c); } void comcnpollc(dev_t dev, int on) { } #ifdef KGDB int com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag) { int res; if (iot == comconstag && iobase == comconsaddr) return (EBUSY); /* cannot share with console */ res = cominit(iot, iobase, rate, frequency, cflag, &com_kgdb_ioh); if (res) return (res); /* * XXXfvdl this shouldn't be needed, but the cn_magic goo * expects this to be initialized */ cn_init_magic(&com_cnm_state); cn_set_magic("\047\001"); kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL); kgdb_dev = 123; /* unneeded, only to satisfy some tests */ com_kgdb_iot = iot; com_kgdb_addr = iobase; return (0); } /* ARGSUSED */ int com_kgdb_getc(void *arg) { return (com_common_getc(NODEV, com_kgdb_iot, com_kgdb_ioh)); } /* ARGSUSED */ void com_kgdb_putc(void *arg, int c) { com_common_putc(NODEV, com_kgdb_iot, com_kgdb_ioh, c); } #endif /* KGDB */ /* helper function to identify the com ports used by console or KGDB (and not yet autoconf attached) */ int com_is_console(bus_space_tag_t iot, bus_addr_t iobase, bus_space_handle_t *ioh) { bus_space_handle_t help; if (!comconsattached && iot == comconstag && iobase == comconsaddr) help = comconsioh; #ifdef KGDB else if (!com_kgdb_attached && iot == com_kgdb_iot && iobase == com_kgdb_addr) help = com_kgdb_ioh; #endif else return (0); if (ioh) *ioh = help; return (1); }