/* $NetBSD: dp.c,v 1.9 1996/02/02 18:06:54 mycroft Exp $ */ /* Written by Phil Nelson for the pc532. Used source with the following * copyrights as a model. * * dp.c: A NCR DP8490 driver for the pc532. */ /* * (Mostly) Written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * */ /* * a FEW lines in this driver come from a MACH adaptec-disk driver * so the copyright below is included: * * Copyright 1990 by Open Software Foundation, * Grenoble, FRANCE * * All Rights Reserved * * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies and * that both the copyright notice and this permission notice appear in * supporting documentation, and that the name of OSF or Open Software * Foundation not be used in advertising or publicity pertaining to * distribution of the software without specific, written prior * permission. * * OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, * IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM * LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT, * NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "dpreg.h" #define DP_DEBUG 0 /* Some constants (may need to be changed!) */ #define DP_NSEG 16 int dpprobe(struct pc532_device *); int dpattach(struct pc532_device *); int dp_scsi_cmd(struct scsi_xfer *); void dpminphys(struct buf *); long int dp_adapter_info(int); void dp_intr(void); void dp_intr_work(void); struct scsidevs * scsi_probe(int masunit, struct scsi_switch *sw, int physid, int type, int want); struct pc532_driver dpdriver = { dpprobe, dpattach, "dp", }; struct scsi_switch dp_switch = { "dp", dp_scsi_cmd, dpminphys, 0, 0, dp_adapter_info, 0, 0, 0 }; /* Sense command. */ static u_char sense_cmd[] = { 3, 0, 0, 0, 0, 0}; /* Do we need to initialize. */ int dp_needs_init = 1; /* Do we need a reset . */ int dp_needs_reset = 1; /* SCSI phase we are currently in . . . */ int dp_scsi_phase; /* SCSI Driver state */ int dp_dvr_state = DP_DVR_READY; /* For polled error reporting. */ int dp_intr_retval; /* For counting the retries. */ int dp_try_count; /* Give the interrupt routine access to the current scsi_xfer info block. */ struct scsi_xfer *cur_xs = NULL; /* names of phases for debug printouts */ const char *dp_phase_names[] = { "DATA OUT", "DATA IN", "CMD", "STATUS", "PHASE 4", "PHASE 5", "MSG OUT", "MSG IN", }; /* Initial probe for a device. If it is using the dp controller, just say yes so that attach can be the one to find the real drive. */ int dpprobe(struct pc532_device *dvp) { /* If we call this, we need to add SPL_DP to the bio mask! */ PL_bio |= SPL_DP; PL_zero |= PL_bio; if (dp_needs_init) dp_initialize(); if (dp_needs_reset) dp_reset(); /* All pc532s should have one, so we don't check ! :) */ return (1); } int dpattach(struct pc532_device *dvp) { int r; r = scsi_attach(0, 7, &dp_switch, &dvp->pd_drive, &dvp->pd_unit, dvp->pd_flags); return(r); } void dpminphys(struct buf *bp) { if(bp->b_bcount > ((DP_NSEG - 1) * NBPG)) bp->b_bcount = ((DP_NSEG - 1) * NBPG); minphys(bp); } long int dp_adapter_info(int unit) { return (1); /* only 1 outstanding request. */ } #if DP_DEBUG void dp_print_stat1(u_char stat1) { printf("stat1="); if ( stat1 & 0x80 ) printf(" /RST"); if ( stat1 & 0x40 ) printf(" /BSY"); if ( stat1 & 0x20 ) printf(" /REQ"); if ( stat1 & 0x10 ) printf(" /MSG"); if ( stat1 & 0x08 ) printf(" /CD"); if ( stat1 & 0x04 ) printf(" /IO"); if ( stat1 & 0x02 ) printf(" /SEL"); if ( stat1 & 0x01 ) printf(" /DBP"); printf("\n"); } void dp_print_stat2(u_char stat2) { printf("stat2="); if ( stat2 & 0x80 ) printf(" EDMA"); if ( stat2 & 0x40 ) printf(" DRQ"); if ( stat2 & 0x20 ) printf(" SPER"); if ( stat2 & 0x10 ) printf(" INT"); if ( stat2 & 0x08 ) printf(" PHSM"); if ( stat2 & 0x04 ) printf(" BSY"); if ( stat2 & 0x02 ) printf(" /ATN"); if ( stat2 & 0x01 ) printf(" /ACK"); printf("\n"); } #endif #if DP_DEBUG void dp_print_regs() { u_char stat1 = RD_ADR(u_char, DP_STAT1); u_char stat2 = RD_ADR(u_char, DP_STAT2); dp_print_stat1(stat1); dp_print_stat2(stat2); } #endif /* Do a scsi command. */ int dp_scsi_cmd(struct scsi_xfer *xs) { struct iovec *iovp; int flags; int retval; /* Return values from functions. */ int x; /* for splbio() & splhigh() */ int dvr_state; int ti_val; /* For timeouts. */ #if DP_DEBUG printf("\n"); #endif x = splhigh(); if (dp_dvr_state == DP_DVR_READY) dp_dvr_state = DP_DVR_STARTED; dvr_state = dp_dvr_state; splx(x); if (dvr_state != DP_DVR_STARTED) return (TRY_AGAIN_LATER); cur_xs = xs; /* Some initial checks. */ flags = xs->flags; if (!(flags & INUSE)) { #if DP_DEBUG printf("dp xs not in use!\n"); #endif xs->flags |= INUSE; } if (flags & ITSDONE) { #if DP_DEBUG printf("dp xs already done!\n"); #endif xs->flags &= ~ITSDONE; } if (dp_needs_reset || (xs->flags & SCSI_RESET)) dp_reset(); #if DP_DEBUG printf ("scsi_cmd: flags=0x%x, targ=%d, lu=%d, cmdlen=%d, cmd=%x\n", xs->flags, xs->targ, xs->lu, xs->cmdlen, xs->cmd->opcode); #endif #if 1 /* we don't always get NOMASK passed in, so this hack fakes it. */ { if ( !initproc ) xs->flags |= SCSI_NOMASK; } #endif if (!(xs->flags & SCSI_NOMASK)) { x = splbio(); retval = dp_start_cmd(xs); splx(x); return retval; } /* No interrupts available! */ retval = dp_start_cmd(xs); if (retval != SUCCESSFULLY_QUEUED) return retval; #if DP_DEBUG > 1 printf("polling for interrupts\n"); #endif ti_val = WAIT_MUL * xs->timeout; while (dp_dvr_state != DP_DVR_READY) { if (RD_ADR(u_char, DP_STAT2) & DP_S_IRQ) { dp_intr_work(); ti_val = WAIT_MUL * xs->timeout; retval = dp_intr_retval; } if (--ti_val == 0) { /* Software Timeout! */ xs->error = XS_SWTIMEOUT; dp_dvr_state = DP_DVR_READY; retval = HAD_ERROR; } } if (xs->error == XS_SWTIMEOUT) { /* Software Timeout! */ printf ("scsi timeout!\n"); #if DP_DEBUG dp_print_regs(); printf("TCMD = 0x%x\n", RD_ADR(u_char, DP_TCMD)); #endif dp_reset(); } #if 1 /* another hack: read cannot handle anything but SUCCESSFULLY_QUEUED */ if (xs->cmd->opcode == 0x28) return SUCCESSFULLY_QUEUED; #endif return retval; } /*===========================================================================* * dp_intr * *===========================================================================*/ /* This is where a lot of the work happens! This is called in non-interrupt mode when an interrupt would have happened. It is also the real interrupt routine. It uses dp_dvr_state to determine the next actions along with cur_xs->flags. */ void dp_intr(void) { int x = splhigh(); #if DP_DEBUG printf("\n REAL dp_intr\n"); #endif dp_intr_work(); splx(x); } void dp_intr_work(void) { u_char isr; u_char new_phase; u_char stat1; u_char stat2; static u_char status; static u_char message; int ret; scsi_select_ctlr (DP8490); WR_ADR(u_char, DP_EMR_ISR, DP_EF_ISR_NEXT); isr = RD_ADR (u_char, DP_EMR_ISR); dp_clear_isr(); stat1 = RD_ADR(u_char, DP_STAT1); new_phase = (stat1 >> 2) & 7; #if DP_DEBUG printf ("dp_intr: dvr_state %d isr=0x%x new_phase = %d %s\n", dp_dvr_state, isr, new_phase, dp_phase_names[new_phase]); #if DP_DEBUG > 1 dp_print_regs(); #endif #endif #if 0 /* de-assert the bus */ WR_ADR(u_char, DP_ICMD, DP_EMODE); /* disable dma */ RD_ADR(u_char, DP_MODE) &= ~DP_M_DMA; #endif if (isr & DP_ISR_BSYERR) { #if DP_DEBUG printf("dp_intr: Busy error\n"); #endif } if (isr & DP_ISR_EDMA) { #if DP_DEBUG > 1 printf("dp_intr: EDMA detected\n"); #endif RD_ADR(u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR(u_char, DP_ICMD, DP_EMODE); } if (!(isr & DP_ISR_APHS)) { #if DP_DEBUG > 1 printf("dp_intr: Not an APHS!\n"); printf("dp_intr: dvr_state %d isr=0x%x (exit)\n", dp_dvr_state, isr); #endif return; } switch (dp_dvr_state) { case DP_DVR_ARB: /* Next comes the command phase! */ if (new_phase != DP_PHASE_CMD) { #if DP_DEBUG printf ("Phase mismatch cmd!\n"); #endif goto phase_mismatch; } dp_dvr_state = DP_DVR_CMD; ret = dp_pdma_out(cur_xs->cmd, cur_xs->cmdlen, DP_PHASE_CMD); dp_clear_isr(); break; case DP_DVR_CMD: /* Next comes the data i/o phase if needed. */ /* * This state can potentially accept data in, data out, * or status for new_phase. data in or data out could * be skipped (new_phase is status) if an error was detected * in the command. */ if (cur_xs->flags & SCSI_DATA_UIO) { /* UIO work. */ panic ("scsi uio"); } if (new_phase == DP_PHASE_DATAI) { #if 1 /* just a quick hack until we can trust flags to be correct */ if (!cur_xs->data) { #else if (!(cur_xs->flags & SCSI_DATA_IN)) { #endif #if DP_DEBUG printf("Phase mismatch in.\n"); #endif goto phase_mismatch; } /* expect STAT phase next */ dp_dvr_state = DP_DVR_DATA; ret = dp_pdma_in(cur_xs->data, cur_xs->datalen, DP_PHASE_DATAI); dp_clear_isr(); break; } else if (new_phase == DP_PHASE_DATAO) { #if 1 /* just a quick hack until we can trust flags to be correct */ if (!cur_xs->data) { #else if (!(cur_xs->flags & SCSI_DATA_OUT)) { #endif #if DP_DEBUG printf("Phase mismatch out.\n"); #endif goto phase_mismatch; } /* expect STAT phase next */ dp_dvr_state = DP_DVR_DATA; ret = dp_pdma_out(cur_xs->data, cur_xs->datalen, DP_PHASE_DATAO); dp_clear_isr(); break; } /* Fall through to next phase. */ case DP_DVR_DATA: /* Next comes the stat phase */ if (new_phase != DP_PHASE_STATUS) { #if DP_DEBUG printf("Phase mismatch stat.\n"); #endif goto phase_mismatch; } dp_dvr_state = DP_DVR_STAT; dp_pdma_in(&status, 1, DP_PHASE_STATUS); dp_clear_isr(); #if DP_DEBUG > 1 printf("status = 0x%x\n", status); #endif break; case DP_DVR_STAT: if (new_phase != DP_PHASE_MSGI) { #if DP_DEBUG printf ("msgi phase mismatch\n"); #endif goto phase_mismatch; } dp_dvr_state = DP_DVR_MSGI; dp_pdma_in(&message, 1, DP_PHASE_MSGI); dp_clear_isr(); #if DP_DEBUG > 1 printf("message = 0x%x\n", message); #endif #if 0 if (status != SCSI_OK && dp_try_count < cur_xs->retries) { printf("dp_intr: retry: dp_try_count = %d\n", dp_try_count); dp_restart_cmd(); } #endif break; default: phase_mismatch: /* TEMP error generation!!! */ dp_reset(); dp_dvr_state = DP_DVR_READY; cur_xs->error = XS_DRIVER_STUFFUP; dp_intr_retval = HAD_ERROR; /* If this true interrupt code, call the done routine. */ if (cur_xs->when_done) { (*(cur_xs->when_done))(cur_xs->done_arg, cur_xs->done_arg2); } } if (dp_dvr_state == DP_DVR_MSGI) { #if DP_DEBUG > 1 printf ("dvr_stat: dp_try_count = %d\n", dp_try_count); #endif WR_ADR (u_char, DP_MODE, 0); /* Turn off monbsy, dma, ... */ if (status == SCSI_OK) { cur_xs->error = XS_NOERROR; dp_intr_retval = COMPLETE; } else if (status & SCSI_BUSY) { cur_xs->error = XS_BUSY; dp_intr_retval = HAD_ERROR; } else if (status & SCSI_CHECK) { /* Do a sense command. */ cur_xs->error = XS_SENSE; dp_intr_retval = HAD_ERROR; dp_get_sense (cur_xs); } cur_xs->flags |= ITSDONE; dp_dvr_state = DP_DVR_READY; #if DP_DEBUG > 1 printf("calling wakeup on 0x%x\n", cur_xs); #endif wakeup((caddr_t) cur_xs); /* If this true interrupt code, call the done routine. */ if (cur_xs->when_done) { #if DP_DEBUG > 1 printf("dp_intr: calling when_done 0x%x\n", cur_xs->when_done); #endif (*(cur_xs->when_done))(cur_xs->done_arg, cur_xs->done_arg2); } } #if DP_DEBUG > 1 printf ("exit dp_intr.\n"); #endif } /*===========================================================================* * dp_initialize * *===========================================================================*/ dp_initialize() { #if DP_DEBUG printf("dp_initialize()\n"); #endif scsi_select_ctlr (DP8490); WR_ADR (u_char, DP_ICMD, DP_EMODE); /* Set Enhanced mode */ WR_ADR (u_char, DP_MODE, 0); /* Disable everything. */ WR_ADR (u_char, DP_EMR_ISR, DP_EF_RESETIP); WR_ADR (u_char, DP_EMR_ISR, DP_EF_NOP); WR_ADR (u_char, DP_SER, 0x80); /* scsi adr 7. */ dp_scsi_phase = DP_PHASE_NONE; dp_needs_init = 0; } /*===========================================================================* * dp_reset * *===========================================================================*/ /* * Reset dp SCSI bus. */ dp_reset() { volatile int i; int x = splbio(); scsi_select_ctlr (DP8490); WR_ADR (u_char, DP_MODE, 0); /* get into harmless state */ WR_ADR (u_char, DP_OUTDATA, 0); WR_ADR (u_char, DP_ICMD, DP_A_RST|DP_EMODE); /* assert RST on SCSI bus */ for (i = 55; i; --i); /* wait 25 usec */ WR_ADR (u_char, DP_ICMD, DP_EMODE); /* deassert RST, get off bus */ WR_ADR (u_char, DP_EMR_ISR, DP_EF_ISR_NEXT | DP_EMR_APHS); WR_ADR (u_char, DP_EMR_ISR, DP_INT_MASK); /* set interrupt mask */ splx(x); for (i = 800000; i; --i); /* wait 360 msec */ dp_needs_reset = 0; } /*===========================================================================* * dp_wait_bus_free * *===========================================================================*/ /* Wait for the SCSI bus to become free. Currently polled because I am * assuming a single initiator configuration -- so this code would not be * running if the bus were busy. */ int dp_wait_bus_free() { int i; u_char stat1; volatile int j; /* get into a harmless state */ WR_ADR (u_char, DP_TCMD, 0); WR_ADR (u_char, DP_MODE, 0); /* return to initiator mode */ WR_ADR (u_char, DP_ICMD, DP_EMODE); /* clear SEL, disable data out */ i = WAIT_MUL * 2000; while (i--) { /* Must be clear for 2 usec, so read twice */ stat1 = RD_ADR (u_char, DP_STAT1); if (stat1 & (DP_S_BSY | DP_S_SEL)) continue; for (j = 5; j; j--); stat1 = RD_ADR (u_char, DP_STAT1); if (stat1 & (DP_S_BSY | DP_S_SEL)) continue; return OK; } #if DP_DEBUG printf("wait bus free failed\n"); dp_print_stat1(stat1); #endif dp_needs_reset = 1; return NOT_OK; } /*===========================================================================* * dp_select * *===========================================================================*/ /* Select SCSI device, set up for command transfer. */ int dp_select(adr) long adr; { int i, stat1; #if DP_DEBUG > 1 printf("dp_select(0x%x)\n", adr); #endif WR_ADR (u_char, DP_TCMD, 0); /* get to harmless state */ WR_ADR (u_char, DP_MODE, 0); /* get to harmless state */ WR_ADR (u_char, DP_OUTDATA, adr); /* SCSI bus address */ WR_ADR (u_char, DP_ICMD, DP_A_SEL | DP_ENABLE_DB | DP_EMODE); for (i = 0;; ++i) { /* wait for target to assert SEL */ stat1 = RD_ADR (u_char, DP_STAT1); if (stat1 & DP_S_BSY) break; /* select successful */ if (i > WAIT_MUL * 2000) { /* timeout */ u_char isr; WR_ADR(u_char, DP_EMR_ISR, DP_EF_ISR_NEXT); isr = RD_ADR (u_char, DP_EMR_ISR); #if DP_DEBUG printf ("SCSI: SELECT timeout adr %d\n", adr); dp_print_regs(); printf("ICMD = 0x%x isr = 0x%x\n", RD_ADR(u_char, DP_ICMD), isr); #endif dp_reset(); return NOT_OK; } } WR_ADR (u_char, DP_ICMD, DP_EMODE); /* clear SEL, disable data out */ WR_ADR (u_char, DP_OUTDATA, 0); dp_clear_isr(); WR_ADR (u_char, DP_TCMD, 4); /* bogus phase, guarantee mismatch */ WR_ADR (u_char, DP_MODE, DP_M_BSY | DP_M_DMA); return OK; } /*===========================================================================* * scsi_select_ctlr *===========================================================================*/ /* Select a SCSI device. */ scsi_select_ctlr (ctlr) int ctlr; { /* May need other stuff here to syncronize between dp & aic. */ RD_ADR (u_char, ICU_IO) &= ~ICU_SCSI_BIT; /* i/o, not port */ RD_ADR (u_char, ICU_DIR) &= ~ICU_SCSI_BIT; /* output */ if (ctlr == DP8490) RD_ADR (u_char, ICU_DATA) &= ~ICU_SCSI_BIT; /* select = 0 for 8490 */ else RD_ADR (u_char, ICU_DATA) |= ICU_SCSI_BIT; /* select = 1 for AIC6250 */ } /*===========================================================================* * dp_start_cmd * *===========================================================================*/ int dp_start_cmd(struct scsi_xfer *xs) { #if 0 WR_ADR (u_char, DP_OUTDATA, 1 << xs->targ); /* SCSI bus address */ WR_ADR (u_char, DP_EMR_ISR, DP_EF_ARB); dp_dvr_state = DP_DVR_ARB; #else /* This is not the "right" way to start it. We should just have the chip do the select for us and interrupt at the end. */ if (!dp_wait_bus_free()) { #if DP_DEBUG printf("dp_start_cmd: DP DRIVER BUSY\n"); #endif xs->error = XS_BUSY; return TRY_AGAIN_LATER; } if (!dp_select(1 << xs->targ)) { #if DP_DEBUG printf("dp_start_cmd: DP DRIVER STUFFUP\n"); #endif xs->error = XS_DRIVER_STUFFUP; return HAD_ERROR; } #endif /* After selection, we now wait for the APHS interrupt! */ dp_dvr_state = DP_DVR_ARB; /* Just finished the select/arbitration */ dp_try_count = 1; if (!(xs->flags & SCSI_NOMASK)) { /* Set up the timeout! */ #if DP_DEBUG > 1 printf ("dp_start_cmd: dp timeouts not done\n"); #endif } return SUCCESSFULLY_QUEUED; } /*===========================================================================* * dp_restart_cmd * *===========================================================================*/ int dp_restart_cmd() { #if 0 WR_ADR (u_char, DP_OUTDATA, xs->targ); /* SCSI bus address */ WR_ADR (u_char, DP_EMR_ISR, DP_EF_ARB); dp_dvr_state = DP_DVR_ARB; #endif /* This is not the "right" way to start it. We should just have the chip do the select for us and interrupt at the end. */ DELAY(50); #if DP_DEBUG printf ("restart .. stat1=0x%x stat2=0x%x\n", RD_ADR(u_char, DP_STAT1), RD_ADR(u_char, DP_STAT2)); #endif if (!dp_wait_bus_free()) { cur_xs->error = XS_BUSY; return; } #if DP_DEBUG printf ("restart .1 stat1=0x%x stat2=0x%x\n", RD_ADR(u_char, DP_STAT1), RD_ADR(u_char, DP_STAT2)); printf ("cur_xs->targ=%d\n",cur_xs->targ); #endif if (!dp_select (1 << cur_xs->targ)) { cur_xs->error = XS_DRIVER_STUFFUP; return; } #if DP_DEBUG printf ("restart .2 stat1=0x%x stat2=0x%x\n", RD_ADR(u_char, DP_STAT1), RD_ADR(u_char, DP_STAT2)); #endif /* After selection, we now wait for the APHS interrupt! */ dp_dvr_state = DP_DVR_ARB; /* Just finished the select/arbitration */ dp_try_count++; if (!(cur_xs->flags & SCSI_NOMASK)) { /* Set up the timeout! */ #if DP_DEBUG printf ("dp_restart_cmd: dp timeouts not done\n"); #endif } } /*===========================================================================* * dp_pdma_out * *===========================================================================*/ /* Note: in NetBSD, the scsi dma addresses are set by the mapping hardware to inhibit cache. There is therefore, no need to worry about cache hits during access to dma addresses. */ int dp_pdma_out(char *buf, int count, int phase) { int cnt; int ret = OK; u_int stat2; #if DP_DEBUG printf("dp_pdma_out: write %d bytes\n", count); #endif #if DP_DEBUG > 1 if (RD_ADR(u_char, DP_STAT2) & DP_S_IRQ) printf("WARNING: stat2:IRQ set on call to dp_pdma_out\n"); #endif /* Set it up. */ WR_ADR(u_char, DP_TCMD, phase); RD_ADR(u_char, DP_MODE) |= DP_M_DMA; WR_ADR(u_char, DP_ICMD, DP_ENABLE_DB | DP_EMODE); WR_ADR(u_char, DP_START_SEND, 0); /* Do the pdma: first longs, then bytes. */ while (count > sizeof(long)) { WR_ADR(long, DP_DMA, *(((long *)buf)++)); count -= sizeof(long); } while (count-- > 1) { WR_ADR(u_char, DP_DMA, *(buf++)); } /* wait for DRQ to be asserted for the last byte, or an * interrupt request to be signaled */ while (1) { stat2 = RD_ADR(u_char, DP_STAT2); if (stat2 & (DP_S_IRQ | DP_S_DRQ)) break; } if (stat2 & DP_S_DRQ) { WR_ADR(u_char, DP_DMA_EOP, *buf); } else { /* dma error! */ #if DP_DEBUG printf ("dma write error!\n"); dp_print_stat1(RD_ADR(u_char, DP_STAT1)); dp_print_stat2(stat2); #endif cur_xs->error = XS_DRIVER_STUFFUP; /* Clear dma mode, just in case, and disable the bus. */ RD_ADR (u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR (u_char, DP_ICMD, DP_EMODE); ret = NOT_OK; } #if 0 /* Clear dma mode, just in case, and disable the bus. */ RD_ADR (u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR (u_char, DP_ICMD, DP_EMODE); #endif return ret; } /*===========================================================================* * dp_pdma_in * *===========================================================================*/ /* Note: in NetBSD, the scsi dma addresses are set by the mapping hardware to inhibit cache. There is therefore, no need to worry about cache hits during access to dma addresses. */ int dp_pdma_in(char *buf, int count, int phase) { int ret = OK; int i_count = count; u_int stat2; u_char *dma_adr = (u_char *) DP_DMA; /* Address for last few bytes. */ #if DP_DEBUG > 1 printf("dp_pdma_in: read %d bytes\n", count); #endif /* Set it up. */ WR_ADR(u_char, DP_TCMD, phase); RD_ADR(u_char, DP_MODE) |= DP_M_DMA; WR_ADR(u_char, DP_EMR_ISR, DP_EF_START_RCV | DP_EMR_APHS); /* Do the pdma */ while (count >= sizeof(long)) { *(((long *)buf)++) = RD_ADR(long, DP_DMA); count -= sizeof(long); } while (count-- > 0) { *(buf++) = RD_ADR(u_char, (dma_adr++)); } /* Clear dma mode, just in case, and disable the bus. */ RD_ADR(u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR(u_char, DP_ICMD, DP_EMODE); return ret; } dp_wait_for_edma() { int i; for (i = 0; i < 1000000; ++i) { u_char tcmd = RD_ADR(u_char, DP_TCMD); if (tcmd & DP_TCMD_EDMA) { #if DP_DEBUG > 1 printf("dp_wait_for_phase: EDMA detected\n"); #endif RD_ADR(u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR(u_char, DP_ICMD, DP_EMODE); return; } } printf("wait for edma timeout\n"); #if DP_DEBUG dp_print_regs(); #endif panic("dp: wait for edma"); } dp_wait_for_phase(u_char phase) { int i; u_char isr; #if DP_DEBUG > 1 printf("wait for phase %d...", phase); #endif /* set the TCR register */ WR_ADR(u_char, DP_TCMD, phase); /* wait for phase match */ for (i = 0; i < 1000000; ++i) { u_char stat2 = RD_ADR(u_char, DP_STAT2); if (stat2 & DP_S_PHASE) { #if DP_DEBUG > 1 printf("done\n"); #endif /* completely clear the isr */ WR_ADR(u_char, DP_EMR_ISR, DP_EF_ISR_NEXT); isr = RD_ADR (u_char, DP_EMR_ISR); dp_clear_isr(); return; } } printf("wait for phase %d timeout\n", phase); #if DP_DEBUG dp_print_regs(); #endif panic("dp: wait for phase"); } /*===========================================================================* * dp_get_sense * *===========================================================================*/ dp_get_sense (struct scsi_xfer *xs) { u_char status; u_char message; u_char isr; int ret; bzero((u_char *) &xs->sense, sizeof(xs->sense)); /* completely clear the isr on entry */ WR_ADR(u_char, DP_EMR_ISR, DP_EF_ISR_NEXT); isr = RD_ADR (u_char, DP_EMR_ISR); dp_clear_isr(); RD_ADR(u_char, DP_MODE) &= ~DP_M_DMA; WR_ADR(u_char, DP_ICMD, DP_EMODE); #if DP_DEBUG > 2 printf ("sense 1: wait bus free\n"); #endif if (!dp_wait_bus_free()) { #if DP_DEBUG > 2 printf("sense 1: wait-bus-free failed\n"); #endif xs->error = XS_BUSY; return; } #if DP_DEBUG > 2 printf ("sense 2: select device\n"); #endif if (!dp_select (1 << xs->targ)) { #if DP_DEBUG printf("sense 2: select failed\n"); #endif xs->error = XS_DRIVER_STUFFUP; return; } /* completely clear the isr */ WR_ADR(u_char, DP_EMR_ISR, DP_EF_ISR_NEXT); isr = RD_ADR (u_char, DP_EMR_ISR); dp_clear_isr(); /* send the command */ sense_cmd[1] = xs->lu << 5; #if 0 sense_cmd[4] = sizeof(struct scsi_sense_data); #else sense_cmd[4] = 0x04; #endif dp_wait_for_phase(DP_PHASE_CMD); ret = dp_pdma_out(sense_cmd, sizeof(sense_cmd), DP_PHASE_CMD); if (ret != OK) { #if DP_DEBUG printf("dp_pdma_out: ret=%d\n", ret); #endif return; } /* read sense data */ dp_wait_for_edma(); dp_wait_for_phase(DP_PHASE_DATAI); ret = dp_pdma_in((u_char *) &xs->sense, sense_cmd[4], DP_PHASE_DATAI); if (ret != OK) { #if DP_DEBUG printf ("dp_pdma_in: ret=%d\n", ret); #endif } /* read status */ dp_wait_for_phase(DP_PHASE_STATUS); ret = dp_pdma_in(&status, 1, DP_PHASE_STATUS); if (ret != OK) { #if DP_DEBUG printf ("dp_pdma_in: ret=%d\n", ret); #endif } /* read message */ dp_wait_for_phase(DP_PHASE_MSGI); ret = dp_pdma_in(&message, 1, DP_PHASE_MSGI); if (ret != OK) { #if DP_DEBUG printf ("dp_pdma_in: ret=%d\n", ret); #endif } #if DP_DEBUG printf("sense status = 0x%x\n", status); printf(" sense (0x%x) valid = %d code = 0x%x class = 0x%x\n", *(u_char *) &xs->sense, xs->sense.valid, xs->sense.error_code, xs->sense.error_class); #endif if (status & SCSI_BUSY) { xs->error = XS_BUSY; } WR_ADR (u_char, DP_MODE, 0); /* Turn off monbsy, dma, ... */ }