/* $NetBSD: pciide.c,v 1.110 2001/03/20 17:56:46 bouyer Exp $ */ /* * Copyright (c) 1999 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Christopher G. Demetriou * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * PCI IDE controller driver. * * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD * sys/dev/pci/ppb.c, revision 1.16). * * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and * "Programming Interface for Bus Master IDE Controller, Revision 1.0 * 5/16/94" from the PCI SIG. * */ #ifndef WDCDEBUG #define WDCDEBUG #endif #define DEBUG_DMA 0x01 #define DEBUG_XFERS 0x02 #define DEBUG_FUNCS 0x08 #define DEBUG_PROBE 0x10 #ifdef WDCDEBUG int wdcdebug_pciide_mask = 0; #define WDCDEBUG_PRINT(args, level) \ if (wdcdebug_pciide_mask & (level)) printf args #else #define WDCDEBUG_PRINT(args, level) #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_pciide.h" /* inlines for reading/writing 8-bit PCI registers */ static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t, int)); static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t, int, u_int8_t)); static __inline u_int8_t pciide_pci_read(pc, pa, reg) pci_chipset_tag_t pc; pcitag_t pa; int reg; { return (pci_conf_read(pc, pa, (reg & ~0x03)) >> ((reg & 0x03) * 8) & 0xff); } static __inline void pciide_pci_write(pc, pa, reg, val) pci_chipset_tag_t pc; pcitag_t pa; int reg; u_int8_t val; { pcireg_t pcival; pcival = pci_conf_read(pc, pa, (reg & ~0x03)); pcival &= ~(0xff << ((reg & 0x03) * 8)); pcival |= (val << ((reg & 0x03) * 8)); pci_conf_write(pc, pa, (reg & ~0x03), pcival); } void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void piix_setup_channel __P((struct channel_softc*)); void piix3_4_setup_channel __P((struct channel_softc*)); static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t)); static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*)); static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t)); void amd756_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void amd756_setup_channel __P((struct channel_softc*)); void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void apollo_setup_channel __P((struct channel_softc*)); void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void cmd0643_9_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void cmd0643_9_setup_channel __P((struct channel_softc*)); void cmd_channel_map __P((struct pci_attach_args *, struct pciide_softc *, int)); int cmd_pci_intr __P((void *)); void cmd646_9_irqack __P((struct channel_softc *)); void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void cy693_setup_channel __P((struct channel_softc*)); void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void sis_setup_channel __P((struct channel_softc*)); void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void acer_setup_channel __P((struct channel_softc*)); int acer_pci_intr __P((void *)); void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void pdc202xx_setup_channel __P((struct channel_softc*)); int pdc202xx_pci_intr __P((void *)); int pdc20265_pci_intr __P((void *)); void opti_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void opti_setup_channel __P((struct channel_softc*)); void hpt_chip_map __P((struct pciide_softc*, struct pci_attach_args*)); void hpt_setup_channel __P((struct channel_softc*)); int hpt_pci_intr __P((void *)); void pciide_channel_dma_setup __P((struct pciide_channel *)); int pciide_dma_table_setup __P((struct pciide_softc*, int, int)); int pciide_dma_init __P((void*, int, int, void *, size_t, int)); void pciide_dma_start __P((void*, int, int)); int pciide_dma_finish __P((void*, int, int, int)); void pciide_irqack __P((struct channel_softc *)); void pciide_print_modes __P((struct pciide_channel *)); struct pciide_product_desc { u_int32_t ide_product; int ide_flags; const char *ide_name; /* map and setup chip, probe drives */ void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*)); }; /* Flags for ide_flags */ #define IDE_PCI_CLASS_OVERRIDE 0x0001 /* accept even if class != pciide */ #define IDE_16BIT_IOSPACE 0x0002 /* I/O space BARS ignore upper word */ /* Default product description for devices not known from this controller */ const struct pciide_product_desc default_product_desc = { 0, 0, "Generic PCI IDE controller", default_chip_map, }; const struct pciide_product_desc pciide_intel_products[] = { { PCI_PRODUCT_INTEL_82092AA, 0, "Intel 82092AA IDE controller", default_chip_map, }, { PCI_PRODUCT_INTEL_82371FB_IDE, 0, "Intel 82371FB IDE controller (PIIX)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82371SB_IDE, 0, "Intel 82371SB IDE Interface (PIIX3)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82371AB_IDE, 0, "Intel 82371AB IDE controller (PIIX4)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82440MX_IDE, 0, "Intel 82440MX IDE controller", piix_chip_map }, { PCI_PRODUCT_INTEL_82801AA_IDE, 0, "Intel 82801AA IDE Controller (ICH)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82801AB_IDE, 0, "Intel 82801AB IDE Controller (ICH0)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82801BA_IDE, 0, "Intel 82801BA IDE Controller (ICH2)", piix_chip_map, }, { PCI_PRODUCT_INTEL_82801BAM_IDE, 0, "Intel 82801BAM IDE Controller (ICH2)", piix_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_amd_products[] = { { PCI_PRODUCT_AMD_PBC756_IDE, 0, "Advanced Micro Devices AMD756 IDE Controller", amd756_chip_map }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_cmd_products[] = { { PCI_PRODUCT_CMDTECH_640, 0, "CMD Technology PCI0640", cmd_chip_map }, { PCI_PRODUCT_CMDTECH_643, 0, "CMD Technology PCI0643", cmd0643_9_chip_map, }, { PCI_PRODUCT_CMDTECH_646, 0, "CMD Technology PCI0646", cmd0643_9_chip_map, }, { PCI_PRODUCT_CMDTECH_648, IDE_PCI_CLASS_OVERRIDE, "CMD Technology PCI0648", cmd0643_9_chip_map, }, { PCI_PRODUCT_CMDTECH_649, IDE_PCI_CLASS_OVERRIDE, "CMD Technology PCI0649", cmd0643_9_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_via_products[] = { { PCI_PRODUCT_VIATECH_VT82C586_IDE, 0, "VIA Tech VT82C586 IDE Controller", apollo_chip_map, }, { PCI_PRODUCT_VIATECH_VT82C586A_IDE, 0, "VIA Tech VT82C586A IDE Controller", apollo_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_cypress_products[] = { { PCI_PRODUCT_CONTAQ_82C693, IDE_16BIT_IOSPACE, "Cypress 82C693 IDE Controller", cy693_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_sis_products[] = { { PCI_PRODUCT_SIS_5597_IDE, 0, "Silicon Integrated System 5597/5598 IDE controller", sis_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_acer_products[] = { { PCI_PRODUCT_ALI_M5229, 0, "Acer Labs M5229 UDMA IDE Controller", acer_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_promise_products[] = { { PCI_PRODUCT_PROMISE_ULTRA33, IDE_PCI_CLASS_OVERRIDE, "Promise Ultra33/ATA Bus Master IDE Accelerator", pdc202xx_chip_map, }, { PCI_PRODUCT_PROMISE_ULTRA66, IDE_PCI_CLASS_OVERRIDE, "Promise Ultra66/ATA Bus Master IDE Accelerator", pdc202xx_chip_map, }, { PCI_PRODUCT_PROMISE_ULTRA100, IDE_PCI_CLASS_OVERRIDE, "Promise Ultra100/ATA Bus Master IDE Accelerator", pdc202xx_chip_map, }, { PCI_PRODUCT_PROMISE_ULTRA100X, IDE_PCI_CLASS_OVERRIDE, "Promise Ultra100/ATA Bus Master IDE Accelerator", pdc202xx_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_opti_products[] = { { PCI_PRODUCT_OPTI_82C621, 0, "OPTi 82c621 PCI IDE controller", opti_chip_map, }, { PCI_PRODUCT_OPTI_82C568, 0, "OPTi 82c568 (82c621 compatible) PCI IDE controller", opti_chip_map, }, { PCI_PRODUCT_OPTI_82D568, 0, "OPTi 82d568 (82c621 compatible) PCI IDE controller", opti_chip_map, }, { 0, 0, NULL, } }; const struct pciide_product_desc pciide_triones_products[] = { { PCI_PRODUCT_TRIONES_HPT366, IDE_PCI_CLASS_OVERRIDE, "Triones/Highpoint HPT366/370 IDE Controller", hpt_chip_map, }, { 0, 0, NULL, } }; struct pciide_vendor_desc { u_int32_t ide_vendor; const struct pciide_product_desc *ide_products; }; const struct pciide_vendor_desc pciide_vendors[] = { { PCI_VENDOR_INTEL, pciide_intel_products }, { PCI_VENDOR_CMDTECH, pciide_cmd_products }, { PCI_VENDOR_VIATECH, pciide_via_products }, { PCI_VENDOR_CONTAQ, pciide_cypress_products }, { PCI_VENDOR_SIS, pciide_sis_products }, { PCI_VENDOR_ALI, pciide_acer_products }, { PCI_VENDOR_PROMISE, pciide_promise_products }, { PCI_VENDOR_AMD, pciide_amd_products }, { PCI_VENDOR_OPTI, pciide_opti_products }, { PCI_VENDOR_TRIONES, pciide_triones_products }, { 0, NULL } }; /* options passed via the 'flags' config keyword */ #define PCIIDE_OPTIONS_DMA 0x01 int pciide_match __P((struct device *, struct cfdata *, void *)); void pciide_attach __P((struct device *, struct device *, void *)); struct cfattach pciide_ca = { sizeof(struct pciide_softc), pciide_match, pciide_attach }; int pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *)); int pciide_mapregs_compat __P(( struct pci_attach_args *, struct pciide_channel *, int, bus_size_t *, bus_size_t*)); int pciide_mapregs_native __P((struct pci_attach_args *, struct pciide_channel *, bus_size_t *, bus_size_t *, int (*pci_intr) __P((void *)))); void pciide_mapreg_dma __P((struct pciide_softc *, struct pci_attach_args *)); int pciide_chansetup __P((struct pciide_softc *, int, pcireg_t)); void pciide_mapchan __P((struct pci_attach_args *, struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *, int (*pci_intr) __P((void *)))); int pciide_chan_candisable __P((struct pciide_channel *)); void pciide_map_compat_intr __P(( struct pci_attach_args *, struct pciide_channel *, int, int)); int pciide_print __P((void *, const char *pnp)); int pciide_compat_intr __P((void *)); int pciide_pci_intr __P((void *)); const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t)); const struct pciide_product_desc * pciide_lookup_product(id) u_int32_t id; { const struct pciide_product_desc *pp; const struct pciide_vendor_desc *vp; for (vp = pciide_vendors; vp->ide_products != NULL; vp++) if (PCI_VENDOR(id) == vp->ide_vendor) break; if ((pp = vp->ide_products) == NULL) return NULL; for (; pp->ide_name != NULL; pp++) if (PCI_PRODUCT(id) == pp->ide_product) break; if (pp->ide_name == NULL) return NULL; return pp; } int pciide_match(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct pci_attach_args *pa = aux; const struct pciide_product_desc *pp; /* * Check the ID register to see that it's a PCI IDE controller. * If it is, we assume that we can deal with it; it _should_ * work in a standardized way... */ if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) { return (1); } /* * Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE * controllers. Let see if we can deal with it anyway. */ pp = pciide_lookup_product(pa->pa_id); if (pp && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) { return (1); } return (0); } void pciide_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; pcitag_t tag = pa->pa_tag; struct pciide_softc *sc = (struct pciide_softc *)self; pcireg_t csr; char devinfo[256]; const char *displaydev; sc->sc_pp = pciide_lookup_product(pa->pa_id); if (sc->sc_pp == NULL) { sc->sc_pp = &default_product_desc; pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo); displaydev = devinfo; } else displaydev = sc->sc_pp->ide_name; printf(": %s (rev. 0x%02x)\n", displaydev, PCI_REVISION(pa->pa_class)); sc->sc_pc = pa->pa_pc; sc->sc_tag = pa->pa_tag; #ifdef WDCDEBUG if (wdcdebug_pciide_mask & DEBUG_PROBE) pci_conf_print(sc->sc_pc, sc->sc_tag, NULL); #endif sc->sc_pp->chip_map(sc, pa); if (sc->sc_dma_ok) { csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG); csr |= PCI_COMMAND_MASTER_ENABLE; pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr); } WDCDEBUG_PRINT(("pciide: command/status register=%x\n", pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE); } /* tell wether the chip is enabled or not */ int pciide_chipen(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { pcireg_t csr; if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) { csr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG); printf("%s: device disabled (at %s)\n", sc->sc_wdcdev.sc_dev.dv_xname, (csr & PCI_COMMAND_IO_ENABLE) == 0 ? "device" : "bridge"); return 0; } return 1; } int pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep) struct pci_attach_args *pa; struct pciide_channel *cp; int compatchan; bus_size_t *cmdsizep, *ctlsizep; { struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct channel_softc *wdc_cp = &cp->wdc_channel; cp->compat = 1; *cmdsizep = PCIIDE_COMPAT_CMD_SIZE; *ctlsizep = PCIIDE_COMPAT_CTL_SIZE; wdc_cp->cmd_iot = pa->pa_iot; if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan), PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) { printf("%s: couldn't map %s channel cmd regs\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); return (0); } wdc_cp->ctl_iot = pa->pa_iot; if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan), PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) { printf("%s: couldn't map %s channel ctl regs\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, PCIIDE_COMPAT_CMD_SIZE); return (0); } return (1); } int pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr) struct pci_attach_args * pa; struct pciide_channel *cp; bus_size_t *cmdsizep, *ctlsizep; int (*pci_intr) __P((void *)); { struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct channel_softc *wdc_cp = &cp->wdc_channel; const char *intrstr; pci_intr_handle_t intrhandle; cp->compat = 0; if (sc->sc_pci_ih == NULL) { if (pci_intr_map(pa, &intrhandle) != 0) { printf("%s: couldn't map native-PCI interrupt\n", sc->sc_wdcdev.sc_dev.dv_xname); return 0; } intrstr = pci_intr_string(pa->pa_pc, intrhandle); sc->sc_pci_ih = pci_intr_establish(pa->pa_pc, intrhandle, IPL_BIO, pci_intr, sc); if (sc->sc_pci_ih != NULL) { printf("%s: using %s for native-PCI interrupt\n", sc->sc_wdcdev.sc_dev.dv_xname, intrstr ? intrstr : "unknown interrupt"); } else { printf("%s: couldn't establish native-PCI interrupt", sc->sc_wdcdev.sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return 0; } } cp->ih = sc->sc_pci_ih; if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel), PCI_MAPREG_TYPE_IO, 0, &wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) { printf("%s: couldn't map %s channel cmd regs\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); return 0; } if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel), PCI_MAPREG_TYPE_IO, 0, &wdc_cp->ctl_iot, &cp->ctl_baseioh, NULL, ctlsizep) != 0) { printf("%s: couldn't map %s channel ctl regs\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep); return 0; } /* * In native mode, 4 bytes of I/O space are mapped for the control * register, the control register is at offset 2. Pass the generic * code a handle for only one byte at the rigth offset. */ if (bus_space_subregion(wdc_cp->ctl_iot, cp->ctl_baseioh, 2, 1, &wdc_cp->ctl_ioh) != 0) { printf("%s: unable to subregion %s channel ctl regs\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep); bus_space_unmap(wdc_cp->cmd_iot, cp->ctl_baseioh, *ctlsizep); return 0; } return (1); } void pciide_mapreg_dma(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { pcireg_t maptype; bus_addr_t addr; /* * Map DMA registers * * Note that sc_dma_ok is the right variable to test to see if * DMA can be done. If the interface doesn't support DMA, * sc_dma_ok will never be non-zero. If the DMA regs couldn't * be mapped, it'll be zero. I.e., sc_dma_ok will only be * non-zero if the interface supports DMA and the registers * could be mapped. * * XXX Note that despite the fact that the Bus Master IDE specs * XXX say that "The bus master IDE function uses 16 bytes of IO * XXX space," some controllers (at least the United * XXX Microelectronics UM8886BF) place it in memory space. */ maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, PCIIDE_REG_BUS_MASTER_DMA); switch (maptype) { case PCI_MAPREG_TYPE_IO: sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag, PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO, &addr, NULL, NULL) == 0); if (sc->sc_dma_ok == 0) { printf(", but unused (couldn't query registers)"); break; } if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE) && addr >= 0x10000) { sc->sc_dma_ok = 0; printf(", but unused (registers at unsafe address %#lx)", (unsigned long)addr); break; } /* FALLTHROUGH */ case PCI_MAPREG_MEM_TYPE_32BIT: sc->sc_dma_ok = (pci_mapreg_map(pa, PCIIDE_REG_BUS_MASTER_DMA, maptype, 0, &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0); sc->sc_dmat = pa->pa_dmat; if (sc->sc_dma_ok == 0) { printf(", but unused (couldn't map registers)"); } else { sc->sc_wdcdev.dma_arg = sc; sc->sc_wdcdev.dma_init = pciide_dma_init; sc->sc_wdcdev.dma_start = pciide_dma_start; sc->sc_wdcdev.dma_finish = pciide_dma_finish; } break; default: sc->sc_dma_ok = 0; printf(", but unsupported register maptype (0x%x)", maptype); } } int pciide_compat_intr(arg) void *arg; { struct pciide_channel *cp = arg; #ifdef DIAGNOSTIC /* should only be called for a compat channel */ if (cp->compat == 0) panic("pciide compat intr called for non-compat chan %p\n", cp); #endif return (wdcintr(&cp->wdc_channel)); } int pciide_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int i, rv, crv; rv = 0; for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; /* If a compat channel skip. */ if (cp->compat) continue; /* if this channel not waiting for intr, skip */ if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0) continue; crv = wdcintr(wdc_cp); if (crv == 0) ; /* leave rv alone */ else if (crv == 1) rv = 1; /* claim the intr */ else if (rv == 0) /* crv should be -1 in this case */ rv = crv; /* if we've done no better, take it */ } return (rv); } void pciide_channel_dma_setup(cp) struct pciide_channel *cp; { int drive; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct ata_drive_datas *drvp; for (drive = 0; drive < 2; drive++) { drvp = &cp->wdc_channel.ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* setup DMA if needed */ if (((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0) || sc->sc_dma_ok == 0) { drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA); continue; } if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive) != 0) { /* Abort DMA setup */ drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA); continue; } } } int pciide_dma_table_setup(sc, channel, drive) struct pciide_softc *sc; int channel, drive; { bus_dma_segment_t seg; int error, rseg; const bus_size_t dma_table_size = sizeof(struct idedma_table) * NIDEDMA_TABLES; struct pciide_dma_maps *dma_maps = &sc->pciide_channels[channel].dma_maps[drive]; /* If table was already allocated, just return */ if (dma_maps->dma_table) return 0; /* Allocate memory for the DMA tables and map it */ if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size, IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { printf("%s:%d: unable to allocate table DMA for " "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, dma_table_size, (caddr_t *)&dma_maps->dma_table, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { printf("%s:%d: unable to map table DMA for" "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, " "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size, (unsigned long)seg.ds_addr), DEBUG_PROBE); /* Create and load table DMA map for this disk */ if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size, 1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT, &dma_maps->dmamap_table)) != 0) { printf("%s:%d: unable to create table DMA map for " "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } if ((error = bus_dmamap_load(sc->sc_dmat, dma_maps->dmamap_table, dma_maps->dma_table, dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) { printf("%s:%d: unable to load table DMA map for " "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n", (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr), DEBUG_PROBE); /* Create a xfer DMA map for this drive */ if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX, NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, &dma_maps->dmamap_xfer)) != 0) { printf("%s:%d: unable to create xfer DMA map for " "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } return 0; } int pciide_dma_init(v, channel, drive, databuf, datalen, flags) void *v; int channel, drive; void *databuf; size_t datalen; int flags; { struct pciide_softc *sc = v; int error, seg; struct pciide_dma_maps *dma_maps = &sc->pciide_channels[channel].dma_maps[drive]; error = bus_dmamap_load(sc->sc_dmat, dma_maps->dmamap_xfer, databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING); if (error) { printf("%s:%d: unable to load xfer DMA map for" "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, error); return error; } bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0, dma_maps->dmamap_xfer->dm_mapsize, (flags & WDC_DMA_READ) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) { #ifdef DIAGNOSTIC /* A segment must not cross a 64k boundary */ { u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr; u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len; if ((phys & ~IDEDMA_BYTE_COUNT_MASK) != ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) { printf("pciide_dma: segment %d physical addr 0x%lx" " len 0x%lx not properly aligned\n", seg, phys, len); panic("pciide_dma: buf align"); } } #endif dma_maps->dma_table[seg].base_addr = htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr); dma_maps->dma_table[seg].byte_count = htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len & IDEDMA_BYTE_COUNT_MASK); WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n", seg, le32toh(dma_maps->dma_table[seg].byte_count), le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA); } dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |= htole32(IDEDMA_BYTE_COUNT_EOT); bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0, dma_maps->dmamap_table->dm_mapsize, BUS_DMASYNC_PREWRITE); /* Maps are ready. Start DMA function */ #ifdef DIAGNOSTIC if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) { printf("pciide_dma_init: addr 0x%lx not properly aligned\n", (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr); panic("pciide_dma_init: table align"); } #endif /* Clear status bits */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel)); /* Write table addr */ bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel, dma_maps->dmamap_table->dm_segs[0].ds_addr); /* set read/write */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel, (flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0); /* remember flags */ dma_maps->dma_flags = flags; return 0; } void pciide_dma_start(v, channel, drive) void *v; int channel, drive; { struct pciide_softc *sc = v; WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS); bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel, bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START); } int pciide_dma_finish(v, channel, drive, force) void *v; int channel, drive; int force; { struct pciide_softc *sc = v; u_int8_t status; int error = 0; struct pciide_dma_maps *dma_maps = &sc->pciide_channels[channel].dma_maps[drive]; status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel); WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status), DEBUG_XFERS); if (force == 0 && (status & IDEDMA_CTL_INTR) == 0) return WDC_DMAST_NOIRQ; /* stop DMA channel */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel, bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START); /* Unload the map of the data buffer */ bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0, dma_maps->dmamap_xfer->dm_mapsize, (dma_maps->dma_flags & WDC_DMA_READ) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer); if ((status & IDEDMA_CTL_ERR) != 0) { printf("%s:%d:%d: bus-master DMA error: status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status); error |= WDC_DMAST_ERR; } if ((status & IDEDMA_CTL_INTR) == 0) { printf("%s:%d:%d: bus-master DMA error: missing interrupt, " "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status); error |= WDC_DMAST_NOIRQ; } if ((status & IDEDMA_CTL_ACT) != 0) { /* data underrun, may be a valid condition for ATAPI */ error |= WDC_DMAST_UNDER; } return error; } void pciide_irqack(chp) struct channel_softc *chp; { struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; /* clear status bits in IDE DMA registers */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel, bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel)); } /* some common code used by several chip_map */ int pciide_chansetup(sc, channel, interface) struct pciide_softc *sc; int channel; pcireg_t interface; { struct pciide_channel *cp = &sc->pciide_channels[channel]; sc->wdc_chanarray[channel] = &cp->wdc_channel; cp->name = PCIIDE_CHANNEL_NAME(channel); cp->wdc_channel.channel = channel; cp->wdc_channel.wdc = &sc->sc_wdcdev; cp->wdc_channel.ch_queue = malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT); if (cp->wdc_channel.ch_queue == NULL) { printf("%s %s channel: " "can't allocate memory for command queue", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); return 0; } printf("%s: %s channel %s to %s mode\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name, (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ? "configured" : "wired", (interface & PCIIDE_INTERFACE_PCI(channel)) ? "native-PCI" : "compatibility"); return 1; } /* some common code used by several chip channel_map */ void pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr) struct pci_attach_args *pa; struct pciide_channel *cp; pcireg_t interface; bus_size_t *cmdsizep, *ctlsizep; int (*pci_intr) __P((void *)); { struct channel_softc *wdc_cp = &cp->wdc_channel; if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr); else cp->hw_ok = pciide_mapregs_compat(pa, cp, wdc_cp->channel, cmdsizep, ctlsizep); if (cp->hw_ok == 0) return; wdc_cp->data32iot = wdc_cp->cmd_iot; wdc_cp->data32ioh = wdc_cp->cmd_ioh; wdcattach(wdc_cp); } /* * Generic code to call to know if a channel can be disabled. Return 1 * if channel can be disabled, 0 if not */ int pciide_chan_candisable(cp) struct pciide_channel *cp; { struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct channel_softc *wdc_cp = &cp->wdc_channel; if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 && (wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) { printf("%s: disabling %s channel (no drives)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); cp->hw_ok = 0; return 1; } return 0; } /* * generic code to map the compat intr if hw_ok=1 and it is a compat channel. * Set hw_ok=0 on failure */ void pciide_map_compat_intr(pa, cp, compatchan, interface) struct pci_attach_args *pa; struct pciide_channel *cp; int compatchan, interface; { struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct channel_softc *wdc_cp = &cp->wdc_channel; if (cp->hw_ok == 0) return; if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0) return; cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev, pa, compatchan, pciide_compat_intr, cp); if (cp->ih == NULL) { printf("%s: no compatibility interrupt for use by %s " "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); cp->hw_ok = 0; } } void pciide_print_modes(cp) struct pciide_channel *cp; { wdc_print_modes(&cp->wdc_channel); } void default_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; pcireg_t interface = PCI_INTERFACE(pa->pa_class); pcireg_t csr; int channel, drive; struct ata_drive_datas *drvp; u_int8_t idedma_ctl; bus_size_t cmdsize, ctlsize; char *failreason; if (pciide_chipen(sc, pa) == 0) return; if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) { printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); if (sc->sc_pp == &default_product_desc && (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags & PCIIDE_OPTIONS_DMA) == 0) { printf(", but unused (no driver support)"); sc->sc_dma_ok = 0; } else { pciide_mapreg_dma(sc, pa); if (sc->sc_dma_ok != 0) printf(", used without full driver " "support"); } } else { printf("%s: hardware does not support DMA", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_dma_ok = 0; } printf("\n"); if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 0; sc->sc_wdcdev.DMA_cap = 0; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16; for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if (interface & PCIIDE_INTERFACE_PCI(channel)) { cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize, pciide_pci_intr); } else { cp->hw_ok = pciide_mapregs_compat(pa, cp, channel, &cmdsize, &ctlsize); } if (cp->hw_ok == 0) continue; /* * Check to see if something appears to be there. */ failreason = NULL; if (!wdcprobe(&cp->wdc_channel)) { failreason = "not responding; disabled or no drives?"; goto next; } /* * Now, make sure it's actually attributable to this PCI IDE * channel by trying to access the channel again while the * PCI IDE controller's I/O space is disabled. (If the * channel no longer appears to be there, it belongs to * this controller.) YUCK! */ csr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG); pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG, csr & ~PCI_COMMAND_IO_ENABLE); if (wdcprobe(&cp->wdc_channel)) failreason = "other hardware responding at addresses"; pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG, csr); next: if (failreason) { printf("%s: %s channel ignored (%s)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name, failreason); cp->hw_ok = 0; bus_space_unmap(cp->wdc_channel.cmd_iot, cp->wdc_channel.cmd_ioh, cmdsize); bus_space_unmap(cp->wdc_channel.ctl_iot, cp->wdc_channel.ctl_ioh, ctlsize); } else { pciide_map_compat_intr(pa, cp, channel, interface); } if (cp->hw_ok) { cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot; cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh; wdcattach(&cp->wdc_channel); } } if (sc->sc_dma_ok == 0) return; /* Allocate DMA maps */ for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { idedma_ctl = 0; cp = &sc->pciide_channels[channel]; for (drive = 0; drive < 2; drive++) { drvp = &cp->wdc_channel.ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; if ((drvp->drive_flags & DRIVE_DMA) == 0) continue; if (pciide_dma_table_setup(sc, channel, drive) != 0) { /* Abort DMA setup */ printf("%s:%d:%d: can't allocate DMA maps, " "using PIO transfers\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive); drvp->drive_flags &= ~DRIVE_DMA; } printf("%s:%d:%d: using DMA data transfers\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, drive); idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel), idedma_ctl); } } } void piix_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int channel; u_int32_t idetim; bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; switch(sc->sc_pp->ide_product) { case PCI_PRODUCT_INTEL_82371AB_IDE: case PCI_PRODUCT_INTEL_82440MX_IDE: case PCI_PRODUCT_INTEL_82801AA_IDE: case PCI_PRODUCT_INTEL_82801AB_IDE: case PCI_PRODUCT_INTEL_82801BA_IDE: case PCI_PRODUCT_INTEL_82801BAM_IDE: sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; } } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; switch(sc->sc_pp->ide_product) { case PCI_PRODUCT_INTEL_82801AA_IDE: sc->sc_wdcdev.UDMA_cap = 4; break; case PCI_PRODUCT_INTEL_82801BA_IDE: case PCI_PRODUCT_INTEL_82801BAM_IDE: sc->sc_wdcdev.UDMA_cap = 5; break; default: sc->sc_wdcdev.UDMA_cap = 2; } if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE) sc->sc_wdcdev.set_modes = piix_setup_channel; else sc->sc_wdcdev.set_modes = piix3_4_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)), DEBUG_PROBE); if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) { WDCDEBUG_PRINT((", sidetim=0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)), DEBUG_PROBE); if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) { WDCDEBUG_PRINT((", udamreg 0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)), DEBUG_PROBE); } if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE) { WDCDEBUG_PRINT((", IDE_CONTROL 0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)), DEBUG_PROBE); } } WDCDEBUG_PRINT(("\n"), DEBUG_PROBE); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; /* PIIX is compat-only */ if (pciide_chansetup(sc, channel, 0) == 0) continue; idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM); if ((PIIX_IDETIM_READ(idetim, channel) & PIIX_IDETIM_IDE) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } /* PIIX are compat-only pciide devices */ pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr); if (cp->hw_ok == 0) continue; if (pciide_chan_candisable(cp)) { idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE, channel); pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim); } pciide_map_compat_intr(pa, cp, channel, 0); if (cp->hw_ok == 0) continue; sc->sc_wdcdev.set_modes(&cp->wdc_channel); } WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)), DEBUG_PROBE); if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) { WDCDEBUG_PRINT((", sidetim=0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)), DEBUG_PROBE); if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) { WDCDEBUG_PRINT((", udamreg 0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)), DEBUG_PROBE); } if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE) { WDCDEBUG_PRINT((", IDE_CONTROL 0x%x", pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)), DEBUG_PROBE); } } WDCDEBUG_PRINT(("\n"), DEBUG_PROBE); } void piix_setup_channel(chp) struct channel_softc *chp; { u_int8_t mode[2], drive; u_int32_t oidetim, idetim, idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive; oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM); idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel); idedma_ctl = 0; /* set up new idetim: Enable IDE registers decode */ idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, chp->channel); /* setup DMA */ pciide_channel_dma_setup(cp); /* * Here we have to mess up with drives mode: PIIX can't have * different timings for master and slave drives. * We need to find the best combination. */ /* If both drives supports DMA, take the lower mode */ if ((drvp[0].drive_flags & DRIVE_DMA) && (drvp[1].drive_flags & DRIVE_DMA)) { mode[0] = mode[1] = min(drvp[0].DMA_mode, drvp[1].DMA_mode); drvp[0].DMA_mode = mode[0]; drvp[1].DMA_mode = mode[1]; goto ok; } /* * If only one drive supports DMA, use its mode, and * put the other one in PIO mode 0 if mode not compatible */ if (drvp[0].drive_flags & DRIVE_DMA) { mode[0] = drvp[0].DMA_mode; mode[1] = drvp[1].PIO_mode; if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] || piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]]) mode[1] = drvp[1].PIO_mode = 0; goto ok; } if (drvp[1].drive_flags & DRIVE_DMA) { mode[1] = drvp[1].DMA_mode; mode[0] = drvp[0].PIO_mode; if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] || piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]]) mode[0] = drvp[0].PIO_mode = 0; goto ok; } /* * If both drives are not DMA, takes the lower mode, unless * one of them is PIO mode < 2 */ if (drvp[0].PIO_mode < 2) { mode[0] = drvp[0].PIO_mode = 0; mode[1] = drvp[1].PIO_mode; } else if (drvp[1].PIO_mode < 2) { mode[1] = drvp[1].PIO_mode = 0; mode[0] = drvp[0].PIO_mode; } else { mode[0] = mode[1] = min(drvp[1].PIO_mode, drvp[0].PIO_mode); drvp[0].PIO_mode = mode[0]; drvp[1].PIO_mode = mode[1]; } ok: /* The modes are setup */ for (drive = 0; drive < 2; drive++) { if (drvp[drive].drive_flags & DRIVE_DMA) { idetim |= piix_setup_idetim_timings( mode[drive], 1, chp->channel); goto end; } } /* If we are there, none of the drives are DMA */ if (mode[0] >= 2) idetim |= piix_setup_idetim_timings( mode[0], 0, chp->channel); else idetim |= piix_setup_idetim_timings( mode[1], 0, chp->channel); end: /* * timing mode is now set up in the controller. Enable * it per-drive */ for (drive = 0; drive < 2; drive++) { /* If no drive, skip */ if ((drvp[drive].drive_flags & DRIVE) == 0) continue; idetim |= piix_setup_idetim_drvs(&drvp[drive]); if (drvp[drive].drive_flags & DRIVE_DMA) idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel), idedma_ctl); } pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim); pciide_print_modes(cp); } void piix3_4_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; int drive; int channel = chp->channel; oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM); sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM); udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG); ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG); idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel); sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) | PIIX_SIDETIM_RTC_MASK(channel)); idedma_ctl = 0; /* If channel disabled, no need to go further */ if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0) return; /* set up new idetim: Enable IDE registers decode */ idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel); /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) | PIIX_UDMATIM_SET(0x3, channel, drive)); drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; if (((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0)) goto pio; if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE) { ideconf |= PIIX_CONFIG_PINGPONG; } if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE || sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE) { /* setup Ultra/100 */ if (drvp->UDMA_mode > 2 && (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0) drvp->UDMA_mode = 2; if (drvp->UDMA_mode > 4) { ideconf |= PIIX_CONFIG_UDMA100(channel, drive); } else { ideconf &= ~PIIX_CONFIG_UDMA100(channel, drive); if (drvp->UDMA_mode > 2) { ideconf |= PIIX_CONFIG_UDMA66(channel, drive); } else { ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive); } } } if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) { /* setup Ultra/66 */ if (drvp->UDMA_mode > 2 && (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0) drvp->UDMA_mode = 2; if (drvp->UDMA_mode > 2) ideconf |= PIIX_CONFIG_UDMA66(channel, drive); else ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive); } if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) && (drvp->drive_flags & DRIVE_UDMA)) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive); udmareg |= PIIX_UDMATIM_SET( piix4_sct_udma[drvp->UDMA_mode], channel, drive); } else { /* use Multiword DMA */ drvp->drive_flags &= ~DRIVE_UDMA; if (drive == 0) { idetim |= piix_setup_idetim_timings( drvp->DMA_mode, 1, channel); } else { sidetim |= piix_setup_sidetim_timings( drvp->DMA_mode, 1, channel); idetim =PIIX_IDETIM_SET(idetim, PIIX_IDETIM_SITRE, channel); } } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); pio: /* use PIO mode */ idetim |= piix_setup_idetim_drvs(drvp); if (drive == 0) { idetim |= piix_setup_idetim_timings( drvp->PIO_mode, 0, channel); } else { sidetim |= piix_setup_sidetim_timings( drvp->PIO_mode, 0, channel); idetim =PIIX_IDETIM_SET(idetim, PIIX_IDETIM_SITRE, channel); } } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel), idedma_ctl); } pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim); pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim); pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg); pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf); pciide_print_modes(cp); } /* setup ISP and RTC fields, based on mode */ static u_int32_t piix_setup_idetim_timings(mode, dma, channel) u_int8_t mode; u_int8_t dma; u_int8_t channel; { if (dma) return PIIX_IDETIM_SET(0, PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) | PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]), channel); else return PIIX_IDETIM_SET(0, PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) | PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]), channel); } /* setup DTE, PPE, IE and TIME field based on PIO mode */ static u_int32_t piix_setup_idetim_drvs(drvp) struct ata_drive_datas *drvp; { u_int32_t ret = 0; struct channel_softc *chp = drvp->chnl_softc; u_int8_t channel = chp->channel; u_int8_t drive = drvp->drive; /* * If drive is using UDMA, timings setups are independant * So just check DMA and PIO here. */ if (drvp->drive_flags & DRIVE_DMA) { /* if mode = DMA mode 0, use compatible timings */ if ((drvp->drive_flags & DRIVE_DMA) && drvp->DMA_mode == 0) { drvp->PIO_mode = 0; return ret; } ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel); /* * PIO and DMA timings are the same, use fast timings for PIO * too, else use compat timings. */ if ((piix_isp_pio[drvp->PIO_mode] != piix_isp_dma[drvp->DMA_mode]) || (piix_rtc_pio[drvp->PIO_mode] != piix_rtc_dma[drvp->DMA_mode])) drvp->PIO_mode = 0; /* if PIO mode <= 2, use compat timings for PIO */ if (drvp->PIO_mode <= 2) { ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive), channel); return ret; } } /* * Now setup PIO modes. If mode < 2, use compat timings. * Else enable fast timings. Enable IORDY and prefetch/post * if PIO mode >= 3. */ if (drvp->PIO_mode < 2) return ret; ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel); if (drvp->PIO_mode >= 3) { ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel); ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel); } return ret; } /* setup values in SIDETIM registers, based on mode */ static u_int32_t piix_setup_sidetim_timings(mode, dma, channel) u_int8_t mode; u_int8_t dma; u_int8_t channel; { if (dma) return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) | PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel); else return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) | PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel); } void amd756_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; pcireg_t interface = PCI_INTERFACE(pa->pa_class); int channel; pcireg_t chanenable; bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA; sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.UDMA_cap = 4; sc->sc_wdcdev.set_modes = amd756_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN); WDCDEBUG_PRINT(("amd756_chip_map: Channel enable=0x%x\n", chanenable), DEBUG_PROBE); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if ((chanenable & AMD756_CHAN_EN(channel)) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pciide_pci_intr); if (pciide_chan_candisable(cp)) chanenable &= ~AMD756_CHAN_EN(channel); pciide_map_compat_intr(pa, cp, channel, interface); if (cp->hw_ok == 0) continue; amd756_setup_channel(&cp->wdc_channel); } pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN, chanenable); return; } void amd756_setup_channel(chp) struct channel_softc *chp; { u_int32_t udmatim_reg, datatim_reg; u_int8_t idedma_ctl; int mode, drive; struct ata_drive_datas *drvp; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; #ifndef PCIIDE_AMD756_ENABLEDMA int rev = PCI_REVISION( pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG)); #endif idedma_ctl = 0; datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_DATATIM); udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_UDMA); datatim_reg &= ~AMD756_DATATIM_MASK(chp->channel); udmatim_reg &= ~AMD756_UDMA_MASK(chp->channel); /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ if (((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0)) { mode = drvp->PIO_mode; goto pio; } if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) && (drvp->drive_flags & DRIVE_UDMA)) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; udmatim_reg |= AMD756_UDMA_EN(chp->channel, drive) | AMD756_UDMA_EN_MTH(chp->channel, drive) | AMD756_UDMA_TIME(chp->channel, drive, amd756_udma_tim[drvp->UDMA_mode]); /* can use PIO timings, MW DMA unused */ mode = drvp->PIO_mode; } else { /* use Multiword DMA, but only if revision is OK */ drvp->drive_flags &= ~DRIVE_UDMA; #ifndef PCIIDE_AMD756_ENABLEDMA /* * The workaround doesn't seem to be necessary * with all drives, so it can be disabled by * PCIIDE_AMD756_ENABLEDMA. It causes a hard hang if * triggered. */ if (AMD756_CHIPREV_DISABLEDMA(rev)) { printf("%s:%d:%d: multi-word DMA disabled due " "to chip revision\n", sc->sc_wdcdev.sc_dev.dv_xname, chp->channel, drive); mode = drvp->PIO_mode; drvp->drive_flags &= ~DRIVE_DMA; goto pio; } #endif /* mode = min(pio, dma+2) */ if (drvp->PIO_mode <= (drvp->DMA_mode +2)) mode = drvp->PIO_mode; else mode = drvp->DMA_mode + 2; } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); pio: /* setup PIO mode */ if (mode <= 2) { drvp->DMA_mode = 0; drvp->PIO_mode = 0; mode = 0; } else { drvp->PIO_mode = mode; drvp->DMA_mode = mode - 2; } datatim_reg |= AMD756_DATATIM_PULSE(chp->channel, drive, amd756_pio_set[mode]) | AMD756_DATATIM_RECOV(chp->channel, drive, amd756_pio_rec[mode]); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel), idedma_ctl); } pciide_print_modes(cp); pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_DATATIM, datatim_reg); pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_UDMA, udmatim_reg); } void apollo_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; pcireg_t interface = PCI_INTERFACE(pa->pa_class); int rev = PCI_REVISION(pa->pa_class); int channel; u_int32_t ideconf, udma_conf, old_udma_conf; bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; if (sc->sc_pp->ide_product == PCI_PRODUCT_VIATECH_VT82C586A_IDE && rev >= 6) sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.UDMA_cap = 2; sc->sc_wdcdev.set_modes = apollo_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; old_udma_conf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA); WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, " "APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF), pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC), pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM), old_udma_conf), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, old_udma_conf | (APO_UDMA_PIO_MODE(0, 0) | APO_UDMA_EN(0, 0) | APO_UDMA_EN_MTH(0, 0) | APO_UDMA_CLK66(0)), APO_UDMA); udma_conf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA); WDCDEBUG_PRINT(("apollo_chip_map: APO_UDMA now 0x%x\n", udma_conf), DEBUG_PROBE); if ((udma_conf & (APO_UDMA_PIO_MODE(0, 0) | APO_UDMA_EN(0, 0) | APO_UDMA_EN_MTH(0, 0))) == (APO_UDMA_PIO_MODE(0, 0) | APO_UDMA_EN(0, 0) | APO_UDMA_EN_MTH(0, 0))) { if ((udma_conf & APO_UDMA_CLK66(0)) == APO_UDMA_CLK66(0)) { printf("%s: Ultra/66 capable\n", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_wdcdev.UDMA_cap = 4; } else { printf("%s: Ultra/33 capable\n", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_wdcdev.UDMA_cap = 2; } } else { sc->sc_wdcdev.cap &= ~WDC_CAPABILITY_UDMA; } pci_conf_write(sc->sc_pc, sc->sc_tag, old_udma_conf, APO_UDMA); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF); if ((ideconf & APO_IDECONF_EN(channel)) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pciide_pci_intr); if (cp->hw_ok == 0) continue; if (pciide_chan_candisable(cp)) { ideconf &= ~APO_IDECONF_EN(channel); pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF, ideconf); } pciide_map_compat_intr(pa, cp, channel, interface); if (cp->hw_ok == 0) continue; apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel); } WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM), pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE); } void apollo_setup_channel(chp) struct channel_softc *chp; { u_int32_t udmatim_reg, datatim_reg; u_int8_t idedma_ctl; int mode, drive; struct ata_drive_datas *drvp; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; idedma_ctl = 0; datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM); udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA); datatim_reg &= ~APO_DATATIM_MASK(chp->channel); udmatim_reg &= ~APO_UDMA_MASK(chp->channel); /* setup DMA if needed */ pciide_channel_dma_setup(cp); /* * We can't mix Ultra/33 and Ultra/66 on the same channel, so * downgrade to Ultra/33 if needed */ if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA) && (chp->ch_drive[1].drive_flags & DRIVE_UDMA)) { /* both drives UDMA */ if (chp->ch_drive[0].UDMA_mode > 2 && chp->ch_drive[1].UDMA_mode <= 2) { /* drive 0 Ultra/66, drive 1 Ultra/33 */ chp->ch_drive[0].UDMA_mode = 2; } else if (chp->ch_drive[1].UDMA_mode > 2 && chp->ch_drive[0].UDMA_mode <= 2) { /* drive 1 Ultra/66, drive 0 Ultra/33 */ chp->ch_drive[1].UDMA_mode = 2; } } for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ if (((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0)) { mode = drvp->PIO_mode; goto pio; } if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) && (drvp->drive_flags & DRIVE_UDMA)) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; udmatim_reg |= APO_UDMA_EN(chp->channel, drive) | APO_UDMA_EN_MTH(chp->channel, drive) | APO_UDMA_TIME(chp->channel, drive, apollo_udma_tim[drvp->UDMA_mode]); if (drvp->UDMA_mode > 2) udmatim_reg |= APO_UDMA_CLK66(chp->channel); /* can use PIO timings, MW DMA unused */ mode = drvp->PIO_mode; } else { /* use Multiword DMA */ drvp->drive_flags &= ~DRIVE_UDMA; /* mode = min(pio, dma+2) */ if (drvp->PIO_mode <= (drvp->DMA_mode +2)) mode = drvp->PIO_mode; else mode = drvp->DMA_mode + 2; } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); pio: /* setup PIO mode */ if (mode <= 2) { drvp->DMA_mode = 0; drvp->PIO_mode = 0; mode = 0; } else { drvp->PIO_mode = mode; drvp->DMA_mode = mode - 2; } datatim_reg |= APO_DATATIM_PULSE(chp->channel, drive, apollo_pio_set[mode]) | APO_DATATIM_RECOV(chp->channel, drive, apollo_pio_rec[mode]); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel), idedma_ctl); } pciide_print_modes(cp); pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg); pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg); } void cmd_channel_map(pa, sc, channel) struct pci_attach_args *pa; struct pciide_softc *sc; int channel; { struct pciide_channel *cp = &sc->pciide_channels[channel]; bus_size_t cmdsize, ctlsize; u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL); int interface; /* * The 0648/0649 can be told to identify as a RAID controller. * In this case, we have to fake interface */ if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) { interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1); if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) & CMD_CONF_DSA1) interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1); } else { interface = PCI_INTERFACE(pa->pa_class); } sc->wdc_chanarray[channel] = &cp->wdc_channel; cp->name = PCIIDE_CHANNEL_NAME(channel); cp->wdc_channel.channel = channel; cp->wdc_channel.wdc = &sc->sc_wdcdev; if (channel > 0) { cp->wdc_channel.ch_queue = sc->pciide_channels[0].wdc_channel.ch_queue; } else { cp->wdc_channel.ch_queue = malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT); } if (cp->wdc_channel.ch_queue == NULL) { printf("%s %s channel: " "can't allocate memory for command queue", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); return; } printf("%s: %s channel %s to %s mode\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name, (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ? "configured" : "wired", (interface & PCIIDE_INTERFACE_PCI(channel)) ? "native-PCI" : "compatibility"); /* * with a CMD PCI64x, if we get here, the first channel is enabled: * there's no way to disable the first channel without disabling * the whole device */ if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); return; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr); if (cp->hw_ok == 0) return; if (channel == 1) { if (pciide_chan_candisable(cp)) { ctrl &= ~CMD_CTRL_2PORT; pciide_pci_write(pa->pa_pc, pa->pa_tag, CMD_CTRL, ctrl); } } pciide_map_compat_intr(pa, cp, channel, interface); } int cmd_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int i, rv, crv; u_int32_t priirq, secirq; rv = 0; priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF); secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23); for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; /* If a compat channel skip. */ if (cp->compat) continue; if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) || (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) { crv = wdcintr(wdc_cp); if (crv == 0) printf("%s:%d: bogus intr\n", sc->sc_wdcdev.sc_dev.dv_xname, i); else rv = 1; } } return rv; } void cmd_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { int channel; /* * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE * and base adresses registers can be disabled at * hardware level. In this case, the device is wired * in compat mode and its first channel is always enabled, * but we can't rely on PCI_COMMAND_IO_ENABLE. * In fact, it seems that the first channel of the CMD PCI0640 * can't be disabled. */ #ifdef PCIIDE_CMD064x_DISABLE if (pciide_chipen(sc, pa) == 0) return; #endif printf("%s: hardware does not support DMA\n", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_dma_ok = 0; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16; for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cmd_channel_map(pa, sc, channel); } } void cmd0643_9_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int channel; int rev = PCI_REVISION( pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG)); /* * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE * and base adresses registers can be disabled at * hardware level. In this case, the device is wired * in compat mode and its first channel is always enabled, * but we can't rely on PCI_COMMAND_IO_ENABLE. * In fact, it seems that the first channel of the CMD PCI0640 * can't be disabled. */ #ifdef PCIIDE_CMD064x_DISABLE if (pciide_chipen(sc, pa) == 0) return; #endif printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; switch (sc->sc_pp->ide_product) { case PCI_PRODUCT_CMDTECH_649: case PCI_PRODUCT_CMDTECH_648: sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; sc->sc_wdcdev.UDMA_cap = 4; sc->sc_wdcdev.irqack = cmd646_9_irqack; break; case PCI_PRODUCT_CMDTECH_646: if (rev >= CMD0646U2_REV) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; sc->sc_wdcdev.UDMA_cap = 2; } else if (rev >= CMD0646U_REV) { /* * Linux's driver claims that the 646U is broken * with UDMA. Only enable it if we know what we're * doing */ #ifdef PCIIDE_CMD0646U_ENABLEUDMA sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; sc->sc_wdcdev.UDMA_cap = 2; #endif /* explicitely disable UDMA */ pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(0), 0); pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(1), 0); } sc->sc_wdcdev.irqack = cmd646_9_irqack; break; default: sc->sc_wdcdev.irqack = pciide_irqack; } } sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.set_modes = cmd0643_9_setup_channel; WDCDEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54), pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)), DEBUG_PROBE); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; cmd_channel_map(pa, sc, channel); if (cp->hw_ok == 0) continue; cmd0643_9_setup_channel(&cp->wdc_channel); } /* * note - this also makes sure we clear the irq disable and reset * bits */ pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE); WDCDEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54), pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)), DEBUG_PROBE); } void cmd0643_9_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; u_int8_t tim; u_int32_t idedma_ctl, udma_reg; int drive; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; idedma_ctl = 0; /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ tim = cmd0643_9_data_tim_pio[drvp->PIO_mode]; if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) { if (drvp->drive_flags & DRIVE_UDMA) { /* UltraDMA on a 646U2, 0648 or 0649 */ drvp->drive_flags &= ~DRIVE_DMA; udma_reg = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(chp->channel)); if (drvp->UDMA_mode > 2 && (pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_BICSR) & CMD_BICSR_80(chp->channel)) == 0) drvp->UDMA_mode = 2; if (drvp->UDMA_mode > 2) udma_reg &= ~CMD_UDMATIM_UDMA33(drive); else if (sc->sc_wdcdev.UDMA_cap > 2) udma_reg |= CMD_UDMATIM_UDMA33(drive); udma_reg |= CMD_UDMATIM_UDMA(drive); udma_reg &= ~(CMD_UDMATIM_TIM_MASK << CMD_UDMATIM_TIM_OFF(drive)); udma_reg |= (cmd0646_9_tim_udma[drvp->UDMA_mode] << CMD_UDMATIM_TIM_OFF(drive)); pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(chp->channel), udma_reg); } else { /* * use Multiword DMA. * Timings will be used for both PIO and DMA, * so adjust DMA mode if needed * if we have a 0646U2/8/9, turn off UDMA */ if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) { udma_reg = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(chp->channel)); udma_reg &= ~CMD_UDMATIM_UDMA(drive); pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_UDMATIM(chp->channel), udma_reg); } if (drvp->PIO_mode >= 3 && (drvp->DMA_mode + 2) > drvp->PIO_mode) { drvp->DMA_mode = drvp->PIO_mode - 2; } tim = cmd0643_9_data_tim_dma[drvp->DMA_mode]; } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DATA_TIM(chp->channel, drive), tim); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel), idedma_ctl); } pciide_print_modes(cp); } void cmd646_9_irqack(chp) struct channel_softc *chp; { u_int32_t priirq, secirq; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; if (chp->channel == 0) { priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF); pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq); } else { secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23); pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq); } pciide_irqack(chp); } void cy693_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; pcireg_t interface = PCI_INTERFACE(pa->pa_class); bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; /* * this chip has 2 PCI IDE functions, one for primary and one for * secondary. So we need to call pciide_mapregs_compat() with * the real channel */ if (pa->pa_function == 1) { sc->sc_cy_compatchan = 0; } else if (pa->pa_function == 2) { sc->sc_cy_compatchan = 1; } else { printf("%s: unexpected PCI function %d\n", sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function); return; } if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) { printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); } else { printf("%s: hardware does not support DMA", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_dma_ok = 0; } printf("\n"); sc->sc_cy_handle = cy82c693_init(pa->pa_iot); if (sc->sc_cy_handle == NULL) { printf("%s: unable to map hyperCache control registers\n", sc->sc_wdcdev.sc_dev.dv_xname); sc->sc_dma_ok = 0; } sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.set_modes = cy693_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = 1; /* Only one channel for this chip; if we are here it's enabled */ cp = &sc->pciide_channels[0]; sc->wdc_chanarray[0] = &cp->wdc_channel; cp->name = PCIIDE_CHANNEL_NAME(0); cp->wdc_channel.channel = 0; cp->wdc_channel.wdc = &sc->sc_wdcdev; cp->wdc_channel.ch_queue = malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT); if (cp->wdc_channel.ch_queue == NULL) { printf("%s primary channel: " "can't allocate memory for command queue", sc->sc_wdcdev.sc_dev.dv_xname); return; } printf("%s: primary channel %s to ", sc->sc_wdcdev.sc_dev.dv_xname, (interface & PCIIDE_INTERFACE_SETTABLE(0)) ? "configured" : "wired"); if (interface & PCIIDE_INTERFACE_PCI(0)) { printf("native-PCI"); cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize, pciide_pci_intr); } else { printf("compatibility"); cp->hw_ok = pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan, &cmdsize, &ctlsize); } printf(" mode\n"); cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot; cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh; wdcattach(&cp->wdc_channel); if (pciide_chan_candisable(cp)) { pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG, 0); } pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan, interface); if (cp->hw_ok == 0) return; WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE); cy693_setup_channel(&cp->wdc_channel); WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE); } void cy693_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; int drive; u_int32_t cy_cmd_ctrl; u_int32_t idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; int dma_mode = -1; cy_cmd_ctrl = idedma_ctl = 0; /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ if (drvp->drive_flags & DRIVE_DMA) { idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); /* use Multiword DMA */ if (dma_mode == -1 || dma_mode > drvp->DMA_mode) dma_mode = drvp->DMA_mode; } cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] << CY_CMD_CTRL_IOW_PULSE_OFF(drive)); cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] << CY_CMD_CTRL_IOW_REC_OFF(drive)); cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] << CY_CMD_CTRL_IOR_PULSE_OFF(drive)); cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] << CY_CMD_CTRL_IOR_REC_OFF(drive)); } pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl); chp->ch_drive[0].DMA_mode = dma_mode; chp->ch_drive[1].DMA_mode = dma_mode; if (dma_mode == -1) dma_mode = 0; if (sc->sc_cy_handle != NULL) { /* Note: `multiple' is implied. */ cy82c693_write(sc->sc_cy_handle, (sc->sc_cy_compatchan == 0) ? CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode); } pciide_print_modes(cp); if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL, idedma_ctl); } } void sis_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int channel; u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0); pcireg_t interface = PCI_INTERFACE(pa->pa_class); pcireg_t rev = PCI_REVISION(pa->pa_class); bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; if (rev > 0xd0) sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) sc->sc_wdcdev.UDMA_cap = 2; sc->sc_wdcdev.set_modes = sis_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC, pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) | SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) || (channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pciide_pci_intr); if (cp->hw_ok == 0) continue; if (pciide_chan_candisable(cp)) { if (channel == 0) sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN; else sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN; pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0, sis_ctr0); } pciide_map_compat_intr(pa, cp, channel, interface); if (cp->hw_ok == 0) continue; sis_setup_channel(&cp->wdc_channel); } } void sis_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; int drive; u_int32_t sis_tim; u_int32_t idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for " "channel %d 0x%x\n", chp->channel, pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))), DEBUG_PROBE); sis_tim = 0; idedma_ctl = 0; /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ if ((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0) goto pio; if (drvp->drive_flags & DRIVE_UDMA) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; sis_tim |= sis_udma_tim[drvp->UDMA_mode] << SIS_TIM_UDMA_TIME_OFF(drive); sis_tim |= SIS_TIM_UDMA_EN(drive); } else { /* * use Multiword DMA * Timings will be used for both PIO and DMA, * so adjust DMA mode if needed */ if (drvp->PIO_mode > (drvp->DMA_mode + 2)) drvp->PIO_mode = drvp->DMA_mode + 2; if (drvp->DMA_mode + 2 > (drvp->PIO_mode)) drvp->DMA_mode = (drvp->PIO_mode > 2) ? drvp->PIO_mode - 2 : 0; if (drvp->DMA_mode == 0) drvp->PIO_mode = 0; } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); pio: sis_tim |= sis_pio_act[drvp->PIO_mode] << SIS_TIM_ACT_OFF(drive); sis_tim |= sis_pio_rec[drvp->PIO_mode] << SIS_TIM_REC_OFF(drive); } WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for " "channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim); if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL, idedma_ctl); } pciide_print_modes(cp); } void acer_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int channel; pcireg_t cr, interface; bus_size_t cmdsize, ctlsize; pcireg_t rev = PCI_REVISION(pa->pa_class); if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA; if (rev >= 0x20) sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA; sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.UDMA_cap = 2; sc->sc_wdcdev.set_modes = acer_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC, (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) | ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE); /* Enable "microsoft register bits" R/W. */ pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3, pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI); pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1, pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) & ~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1))); pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2, pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) & ~ACER_CHANSTATUSREGS_RO); cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG); cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT); pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr); /* Don't use cr, re-read the real register content instead */ interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG)); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if ((interface & PCIIDE_CHAN_EN(channel)) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, acer_pci_intr); if (cp->hw_ok == 0) continue; if (pciide_chan_candisable(cp)) { cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT); pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr); } pciide_map_compat_intr(pa, cp, channel, interface); acer_setup_channel(&cp->wdc_channel); } } void acer_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; int drive; u_int32_t acer_fifo_udma; u_int32_t idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; idedma_ctl = 0; acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA); WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n", acer_fifo_udma), DEBUG_PROBE); /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for " "channel %d drive %d 0x%x\n", chp->channel, drive, pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE); /* clear FIFO/DMA mode */ acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) | ACER_UDMA_EN(chp->channel, drive) | ACER_UDMA_TIM(chp->channel, drive, 0x7)); /* add timing values, setup DMA if needed */ if ((drvp->drive_flags & DRIVE_DMA) == 0 && (drvp->drive_flags & DRIVE_UDMA) == 0) { acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x1); goto pio; } acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2); if (drvp->drive_flags & DRIVE_UDMA) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive); acer_fifo_udma |= ACER_UDMA_TIM(chp->channel, drive, acer_udma[drvp->UDMA_mode]); } else { /* * use Multiword DMA * Timings will be used for both PIO and DMA, * so adjust DMA mode if needed */ if (drvp->PIO_mode > (drvp->DMA_mode + 2)) drvp->PIO_mode = drvp->DMA_mode + 2; if (drvp->DMA_mode + 2 > (drvp->PIO_mode)) drvp->DMA_mode = (drvp->PIO_mode > 2) ? drvp->PIO_mode - 2 : 0; if (drvp->DMA_mode == 0) drvp->PIO_mode = 0; } idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); pio: pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_IDETIM(chp->channel, drive), acer_pio[drvp->PIO_mode]); } WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n", acer_fifo_udma), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma); if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL, idedma_ctl); } pciide_print_modes(cp); } int acer_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int i, rv, crv; u_int32_t chids; rv = 0; chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS); for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; /* If a compat channel skip. */ if (cp->compat) continue; if (chids & ACER_CHIDS_INT(i)) { crv = wdcintr(wdc_cp); if (crv == 0) printf("%s:%d: bogus intr\n", sc->sc_wdcdev.sc_dev.dv_xname, i); else rv = 1; } } return rv; } void hpt_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int i, compatchan, revision; pcireg_t interface; bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; revision = PCI_REVISION(pa->pa_class); /* * when the chip is in native mode it identifies itself as a * 'misc mass storage'. Fake interface in this case. */ if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) { interface = PCI_INTERFACE(pa->pa_class); } else { interface = PCIIDE_INTERFACE_BUS_MASTER_DMA | PCIIDE_INTERFACE_PCI(0); if (revision == HPT370_REV) interface |= PCIIDE_INTERFACE_PCI(1); } printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA; sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; sc->sc_wdcdev.set_modes = hpt_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; if (revision == HPT366_REV) { sc->sc_wdcdev.UDMA_cap = 4; /* * The 366 has 2 PCI IDE functions, one for primary and one * for secondary. So we need to call pciide_mapregs_compat() * with the real channel */ if (pa->pa_function == 0) { compatchan = 0; } else if (pa->pa_function == 1) { compatchan = 1; } else { printf("%s: unexpected PCI function %d\n", sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function); return; } sc->sc_wdcdev.nchannels = 1; } else { sc->sc_wdcdev.nchannels = 2; sc->sc_wdcdev.UDMA_cap = 5; } for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; if (sc->sc_wdcdev.nchannels > 1) { compatchan = i; if((pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT370_CTRL1(i)) & HPT370_CTRL1_EN) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } } if (pciide_chansetup(sc, i, interface) == 0) continue; if (interface & PCIIDE_INTERFACE_PCI(i)) { cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize, hpt_pci_intr); } else { cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan, &cmdsize, &ctlsize); } if (cp->hw_ok == 0) return; cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot; cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh; wdcattach(&cp->wdc_channel); hpt_setup_channel(&cp->wdc_channel); } if (revision == HPT370_REV) { /* * HPT370_REV has a bit to disable interrupts, make sure * to clear it */ pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_CSEL, pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL) & ~HPT_CSEL_IRQDIS); } return; } void hpt_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; int drive; int cable; u_int32_t before, after; u_int32_t idedma_ctl; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; cable = pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL); /* setup DMA if needed */ pciide_channel_dma_setup(cp); idedma_ctl = 0; /* Per drive settings */ for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; before = pci_conf_read(sc->sc_pc, sc->sc_tag, HPT_IDETIM(chp->channel, drive)); /* add timing values, setup DMA if needed */ if (drvp->drive_flags & DRIVE_UDMA) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; if ((cable & HPT_CSEL_CBLID(chp->channel)) != 0 && drvp->UDMA_mode > 2) drvp->UDMA_mode = 2; after = (sc->sc_wdcdev.nchannels == 2) ? hpt370_udma[drvp->UDMA_mode] : hpt366_udma[drvp->UDMA_mode]; idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else if (drvp->drive_flags & DRIVE_DMA) { /* * use Multiword DMA. * Timings will be used for both PIO and DMA, so adjust * DMA mode if needed */ if (drvp->PIO_mode >= 3 && (drvp->DMA_mode + 2) > drvp->PIO_mode) { drvp->DMA_mode = drvp->PIO_mode - 2; } after = (sc->sc_wdcdev.nchannels == 2) ? hpt370_dma[drvp->DMA_mode] : hpt366_dma[drvp->DMA_mode]; idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else { /* PIO only */ after = (sc->sc_wdcdev.nchannels == 2) ? hpt370_pio[drvp->PIO_mode] : hpt366_pio[drvp->PIO_mode]; } pci_conf_write(sc->sc_pc, sc->sc_tag, HPT_IDETIM(chp->channel, drive), after); WDCDEBUG_PRINT(("%s: bus speed register set to 0x%08x " "(BIOS 0x%08x)\n", drvp->drv_softc->dv_xname, after, before), DEBUG_PROBE); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL, idedma_ctl); } pciide_print_modes(cp); } int hpt_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int rv = 0; int dmastat, i, crv; for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i); if((dmastat & IDEDMA_CTL_INTR) == 0) continue; cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; crv = wdcintr(wdc_cp); if (crv == 0) { printf("%s:%d: bogus intr\n", sc->sc_wdcdev.sc_dev.dv_xname, i); bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat); } else rv = 1; } return rv; } /* Macros to test product */ #define PDC_IS_262(sc) \ ((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66 || \ (sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 || \ (sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X) #define PDC_IS_265(sc) \ ((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 || \ (sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X) void pdc202xx_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; int channel; pcireg_t interface, st, mode; bus_size_t cmdsize, ctlsize; st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE); WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n", st), DEBUG_PROBE); if (pciide_chipen(sc, pa) == 0) return; /* turn off RAID mode */ st &= ~PDC2xx_STATE_IDERAID; /* * can't rely on the PCI_CLASS_REG content if the chip was in raid * mode. We have to fake interface */ interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1); if (st & PDC2xx_STATE_NATIVE) interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1); printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA; sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.PIO_cap = 4; sc->sc_wdcdev.DMA_cap = 2; if (PDC_IS_265(sc)) sc->sc_wdcdev.UDMA_cap = 5; else if (PDC_IS_262(sc)) sc->sc_wdcdev.UDMA_cap = 4; else sc->sc_wdcdev.UDMA_cap = 2; sc->sc_wdcdev.set_modes = pdc202xx_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; /* setup failsafe defaults */ mode = 0; mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]); mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]); mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]); mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 0 " "initial timings 0x%x, now 0x%x\n", channel, pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 0), mode | PDC2xx_TIM_IORDYp); WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 1 " "initial timings 0x%x, now 0x%x\n", channel, pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 1), mode); } mode = PDC2xx_SCR_DMA; if (PDC_IS_262(sc)) { mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT); } else { /* the BIOS set it up this way */ mode = PDC2xx_SCR_SET_GEN(mode, 0x1); } mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */ mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */ WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR 0x%x, now 0x%x\n", bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR), mode), DEBUG_PROBE); bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR, mode); /* controller initial state register is OK even without BIOS */ /* Set DMA mode to IDE DMA compatibility */ mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM); WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode ), DEBUG_PROBE); bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM, mode | 0x1); mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM); WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE); bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM, mode | 0x1); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if ((st & (PDC_IS_262(sc) ? PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } if (PDC_IS_265(sc)) pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pdc20265_pci_intr); else pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pdc202xx_pci_intr); if (cp->hw_ok == 0) continue; if (pciide_chan_candisable(cp)) st &= ~(PDC_IS_262(sc) ? PDC262_STATE_EN(channel):PDC246_STATE_EN(channel)); pciide_map_compat_intr(pa, cp, channel, interface); pdc202xx_setup_channel(&cp->wdc_channel); } WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state 0x%x\n", st), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st); return; } void pdc202xx_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; int drive; pcireg_t mode, st; u_int32_t idedma_ctl, scr, atapi; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; int channel = chp->channel; /* setup DMA if needed */ pciide_channel_dma_setup(cp); idedma_ctl = 0; WDCDEBUG_PRINT(("pdc202xx_setup_channel %s: scr 0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66)), DEBUG_PROBE); /* Per channel settings */ if (PDC_IS_262(sc)) { scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66); st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE); /* Trimm UDMA mode */ if ((st & PDC262_STATE_80P(channel)) != 0 || (chp->ch_drive[0].drive_flags & DRIVE_UDMA && chp->ch_drive[0].UDMA_mode <= 2) || (chp->ch_drive[1].drive_flags & DRIVE_UDMA && chp->ch_drive[1].UDMA_mode <= 2)) { if (chp->ch_drive[0].UDMA_mode > 2) chp->ch_drive[0].UDMA_mode = 2; if (chp->ch_drive[1].UDMA_mode > 2) chp->ch_drive[1].UDMA_mode = 2; } /* Set U66 if needed */ if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA && chp->ch_drive[0].UDMA_mode > 2) || (chp->ch_drive[1].drive_flags & DRIVE_UDMA && chp->ch_drive[1].UDMA_mode > 2)) scr |= PDC262_U66_EN(channel); else scr &= ~PDC262_U66_EN(channel); bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66, scr); WDCDEBUG_PRINT(("pdc202xx_setup_channel %s:%d: ATAPI 0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel, bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_ATAPI(channel))), DEBUG_PROBE); if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI || chp->ch_drive[1].drive_flags & DRIVE_ATAPI) { if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) && !(chp->ch_drive[1].drive_flags & DRIVE_UDMA) && (chp->ch_drive[1].drive_flags & DRIVE_DMA)) || ((chp->ch_drive[1].drive_flags & DRIVE_UDMA) && !(chp->ch_drive[0].drive_flags & DRIVE_UDMA) && (chp->ch_drive[0].drive_flags & DRIVE_DMA))) atapi = 0; else atapi = PDC262_ATAPI_UDMA; bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_ATAPI(channel), atapi); } } for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; mode = 0; if (drvp->drive_flags & DRIVE_UDMA) { /* use Ultra/DMA */ drvp->drive_flags &= ~DRIVE_DMA; mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_udma_mb[drvp->UDMA_mode]); mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_udma_mc[drvp->UDMA_mode]); drvp->drive_flags &= ~DRIVE_DMA; idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else if (drvp->drive_flags & DRIVE_DMA) { mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[drvp->DMA_mode]); mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[drvp->DMA_mode]); idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else { mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]); mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]); } mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]); mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]); if (drvp->drive_flags & DRIVE_ATA) mode |= PDC2xx_TIM_PRE; mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY; if (drvp->PIO_mode >= 3) { mode |= PDC2xx_TIM_IORDY; if (drive == 0) mode |= PDC2xx_TIM_IORDYp; } WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d " "timings 0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, chp->channel, drive, mode), DEBUG_PROBE); pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(chp->channel, drive), mode); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL, idedma_ctl); } pciide_print_modes(cp); } int pdc202xx_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int i, rv, crv; u_int32_t scr; rv = 0; scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR); for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; /* If a compat channel skip. */ if (cp->compat) continue; if (scr & PDC2xx_SCR_INT(i)) { crv = wdcintr(wdc_cp); if (crv == 0) printf("%s:%d: bogus intr (reg 0x%x)\n", sc->sc_wdcdev.sc_dev.dv_xname, i, scr); else rv = 1; } } return rv; } int pdc20265_pci_intr(arg) void *arg; { struct pciide_softc *sc = arg; struct pciide_channel *cp; struct channel_softc *wdc_cp; int i, rv, crv; u_int32_t dmastat; rv = 0; for (i = 0; i < sc->sc_wdcdev.nchannels; i++) { cp = &sc->pciide_channels[i]; wdc_cp = &cp->wdc_channel; /* If a compat channel skip. */ if (cp->compat) continue; /* * The Ultra/100 seems to assert PDC2xx_SCR_INT * spuriously, * however it asserts INT in IDEDMA_CTL even for non-DMA ops. * So use it instead (requires 2 reg reads instead of 1, * but we can't do it another way). */ dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i); if((dmastat & IDEDMA_CTL_INTR) == 0) continue; crv = wdcintr(wdc_cp); if (crv == 0) printf("%s:%d: bogus intr\n", sc->sc_wdcdev.sc_dev.dv_xname, i); else rv = 1; } return rv; } void opti_chip_map(sc, pa) struct pciide_softc *sc; struct pci_attach_args *pa; { struct pciide_channel *cp; bus_size_t cmdsize, ctlsize; pcireg_t interface; u_int8_t init_ctrl; int channel; if (pciide_chipen(sc, pa) == 0) return; printf("%s: bus-master DMA support present", sc->sc_wdcdev.sc_dev.dv_xname); pciide_mapreg_dma(sc, pa); printf("\n"); sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE; sc->sc_wdcdev.PIO_cap = 4; if (sc->sc_dma_ok) { sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK; sc->sc_wdcdev.irqack = pciide_irqack; sc->sc_wdcdev.DMA_cap = 2; } sc->sc_wdcdev.set_modes = opti_setup_channel; sc->sc_wdcdev.channels = sc->wdc_chanarray; sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_INIT_CONTROL); interface = PCI_INTERFACE(pa->pa_class); for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { cp = &sc->pciide_channels[channel]; if (pciide_chansetup(sc, channel, interface) == 0) continue; if (channel == 1 && (init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) { printf("%s: %s channel ignored (disabled)\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name); continue; } pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pciide_pci_intr); if (cp->hw_ok == 0) continue; pciide_map_compat_intr(pa, cp, channel, interface); if (cp->hw_ok == 0) continue; opti_setup_channel(&cp->wdc_channel); } } void opti_setup_channel(chp) struct channel_softc *chp; { struct ata_drive_datas *drvp; struct pciide_channel *cp = (struct pciide_channel*)chp; struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc; int drive, spd; int mode[2]; u_int8_t rv, mr; /* * The `Delay' and `Address Setup Time' fields of the * Miscellaneous Register are always zero initially. */ mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK; mr &= ~(OPTI_MISC_DELAY_MASK | OPTI_MISC_ADDR_SETUP_MASK | OPTI_MISC_INDEX_MASK); /* Prime the control register before setting timing values */ opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE); /* Determine the clockrate of the PCIbus the chip is attached to */ spd = (int) opti_read_config(chp, OPTI_REG_STRAP); spd &= OPTI_STRAP_PCI_SPEED_MASK; /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) { mode[drive] = -1; continue; } if ((drvp->drive_flags & DRIVE_DMA)) { /* * Timings will be used for both PIO and DMA, * so adjust DMA mode if needed */ if (drvp->PIO_mode > (drvp->DMA_mode + 2)) drvp->PIO_mode = drvp->DMA_mode + 2; if (drvp->DMA_mode + 2 > (drvp->PIO_mode)) drvp->DMA_mode = (drvp->PIO_mode > 2) ? drvp->PIO_mode - 2 : 0; if (drvp->DMA_mode == 0) drvp->PIO_mode = 0; mode[drive] = drvp->DMA_mode + 5; } else mode[drive] = drvp->PIO_mode; if (drive && mode[0] >= 0 && (opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) { /* * Can't have two drives using different values * for `Address Setup Time'. * Slow down the faster drive to compensate. */ int d = (opti_tim_as[spd][mode[0]] > opti_tim_as[spd][mode[1]]) ? 0 : 1; mode[d] = mode[1-d]; chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode; chp->ch_drive[d].DMA_mode = 0; chp->ch_drive[d].drive_flags &= DRIVE_DMA; } } for (drive = 0; drive < 2; drive++) { int m; if ((m = mode[drive]) < 0) continue; /* Set the Address Setup Time and select appropriate index */ rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT; rv |= OPTI_MISC_INDEX(drive); opti_write_config(chp, OPTI_REG_MISC, mr | rv); /* Set the pulse width and recovery timing parameters */ rv = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT; rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT; opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv); opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv); /* Set the Enhanced Mode register appropriately */ rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE); rv &= ~OPTI_ENH_MODE_MASK(chp->channel, drive); rv |= OPTI_ENH_MODE(chp->channel, drive, opti_tim_em[m]); pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv); } /* Finally, enable the timings */ opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE); pciide_print_modes(cp); }