# $NetBSD: files.arm26,v 1.9 2000/12/20 10:57:38 bjh21 Exp $

# Copyright (c) 1997, 1998, 2000 Ben Harris
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. The name of the author may not be used to endorse or promote products
#    derived from this software without specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# This file is part of NetBSD/arm26 -- a port of NetBSD to ARM2/3 machines.

maxpartitions 8
maxusers 2 8 64

include "dev/wscons/files.wscons"
include "dev/rasops/files.rasops"
include "dev/wsfont/files.wsfont"

include "dev/ata/files.ata"
major { wd = 4 }
include "dev/scsipi/files.scsipi"
major   {sd = 5}
major   {cd = 6}

# CPU
device	cpu
attach	cpu at root
defopt	opt_cputypes.h	CPU_ARM2 CPU_ARM250 CPU_ARM3
file	arch/arm26/arm26/cpu.c			cpu

# I/O bus (on the far side of the address and data latches)
device iobus { base = -1 }
attach iobus at root
file	arch/arm26/iobus/iobus.c		iobus

# 82C710/1 on A5000 etc will be at iobus0 base 0x00010000 (and 0x00012000???)

# I/O controller (Albion) (usually at iobus0 base 0x00200000)
device	ioc { [bank = -1], [offset = 0] }
attach	ioc at iobus
file	arch/arm26/iobus/ioc.c			ioc		needs-flag

# I^2C bus (bit-banged through IOC control register)
device	iic { addr = -1 }
attach	iic at ioc
file	arch/arm26/ioc/iic.c			iic

# PCF8583 I^2C Clock/calendar/RAM
device	rtc
attach	rtc at iic
file	arch/arm26/ioc/rtc.c			rtc
file	dev/clock_subr.c			rtc

# I/O Extension Block (usually at ioc0 bank 5)
device	ioeb { [offset = -1] }
attach	ioeb at ioc
file	arch/arm26/ioc/ioeb.c			ioeb		needs-flag

# A3010 joysticks
device joy
attach joy at ioeb

# Latches (random internal use) (usually at bank 5 offset 0x18 and 0x40)
device	latch
attach	latch at ioc

# On-board keyboard interface
device	arckbd { }
attach	arckbd at ioc
device	arcwskbd: wskbddev
attach	arcwskbd at arckbd
device	arcwsmouse: wsmousedev
attach	arcwsmouse at arckbd
file	arch/arm26/ioc/arckbd.c			arckbd		needs-flag
file	arch/arm26/ioc/arckbdmap.c		arckbd

# On-board WD 1772 floppy controller (usually at bank 1 irq 12 fiq 0/1)
# Not to be confused with fdc, which will be the PC-style one on A5k etc.
device	wfdc {drive = -1}
attach	wfdc at ioc
device	wf: disk
attach	wf at wfdc
# Steal code from arch/atari/dev/fd{.c,reg.h}
#major	{...}

# Econet module (Motorola 6854) (usually at bank 2 fiq 2)
device	ec: ifnet, arp
attach	ec at ioc

# On-board Rockwell 6551 serial (usually at bank 3 irq 10/1)
device	rs: tty
attach	rs at ioc
file	arch/arm26/arm26/rscons.c	rs needs-flag

# Podule interface (podules listed later) (usually at bank 4 irq 13 fiq 6)
#  Unix backplanes also use bank 6
#  MEMC podules also use the iobus directly
# XXX How on Earth do we codify all that?
device	unixbp
attach	unixbp at ioc
device	podulebus { [slot = -1] }
attach	podulebus at ioc
define	podloader
file	arch/arm26/podulebus/podulebus.c	podulebus
file	arch/arm26/podulebus/podloader_asm.S	podloader	needs-flag
file	arch/arm26/podulebus/unixbp.c		unixbp		needs-flag

# Acorn ST506 interface (usually at bank 5 irq 11, or sometimes on a podule)
device	hdc { drive = -1 }
attach	hdc at ioc with hdc_ioc
attach	hdc at podulebus with hdc_podulebus
device	hd: disk
attach	hd at hdc
#major	{hd = ?}

# On-board printer port (usually at bank 5 addr 0x10 irq 0/2)
device	arclpt
attach	arclpt at ioc

# VIDC/MEMC audio/video subsystems.
# XXX: should be rasops4 as well
device	arcvideo: rasops1, rasops2, rasops8, wsemuldisplaydev
attach	arcvideo at root
file	arch/arm26/vidc/arcvideo.c		arcvideo	needs-flag

device	arcaudio: audio
attach	arcaudio at root

###
# 82C7xx Universal Peripheral Controller
#

# This section belongs in sys/conf/files, but some ports have their own
# "lpt" devices, so it has to stay here.
device	lpt
file	dev/ic/lpt.c				lpt		needs-flag
attach	lpt at upc with lpt_upc
file	dev/ic/lpt_upc.c			lpt_upc

# This section belongs here
attach	upc at iobus with upc_iobus
file	arch/arm26/iobus/upc_iobus.c		upc_iobus

###
# Assorted podules
#

# Acorn Ether1
device	ei: ether, ifnet, arp, i82586
attach	ei at podulebus
file	arch/arm26/podulebus/if_ei.c		ei

# Acorn/Atomwide Ether3
device	ea: ether, ifnet, arp, seeq8005
attach	ea at podulebus
file	arch/arm26/podulebus/if_ea.c		ea

# i-cubed EtherLAN 100, 200 and 500
device	eh: ether, ifnet, arp, dp8390nic, podloader
attach	eh at podulebus
file	arch/arm26/podulebus/if_eh.c		eh

# D.T. software IDE
device	dtide {[channel = -1]}: wdc_base, ata, atapi
attach	dtide at podulebus
file	arch/arm26/podulebus/dtide.c		dtide

# Generic sbic (WD3393) driver
define	sbic
file	arch/arm26/podulebus/sbic.c		sbic

# Acorn SCSI I specific layer for sbic
device  asc: scsi, sbic
attach	asc at podulebus
file	arch/arm26/podulebus/asc.c		asc needs-flag


# Memory disk for installation (or ROM versions?)
file	arch/arm26/arm26/md_root.c		memory_disk_hooks
major	{ md = 1 }

####
# Other files
#

file	dev/cons.c
file	dev/cninit.c

file	arch/arm32/arm32/in_cksum_arm32.c	inet
file	netinet/in4_cksum.c			inet
file	netns/ns_cksum.c			ns

file	arch/arm26/arm26/db_disasm.c		ddb
file	arch/arm26/arm26/db_interface.c		ddb
file	arch/arm26/arm26/db_machdep.c		ddb
file	arch/arm26/arm26/db_trace.c		ddb

file	arch/arm26/arm26/disksubr.c		disk
file	arch/arm26/arm26/disksubr_mbr.c		disk
file	arch/arm26/arm26/disksubr_acorn.c	disk

file	arch/arm26/arm26/aout_machdep.c		exec_aout

file	arch/arm26/arm26/start.c
file	arch/arm26/arm26/autoconf.c
file	arch/arm26/arm26/bus.c
file	arch/arm26/arm26/conf.c
file	arch/arm26/arm26/cons_machdep.c
file	arch/arm26/arm26/copyinout.S
file	arch/arm26/arm26/except.c
file	arch/arm26/arm26/irq.c
file	arch/arm26/arm26/intrnames.S
file	arch/arm26/arm26/Locore.c
file	arch/arm26/arm26/machdep.c
file	arch/arm26/arm26/mem.c
file	arch/arm26/arm26/pmap.c
file	arch/arm26/arm26/process_machdep.c
#file	arch/arm26/arm26/rscons.c
file 	arch/arm26/arm26/softintr.c
file	arch/arm26/arm26/stubs.c
file	arch/arm26/arm26/vm_machdep.c
file	arch/arm32/arm32/disassem.c