/* $NetBSD: if_le.c,v 1.9 1996/01/31 08:47:17 jonathan Exp $ */ /*- * Copyright (c) 1995 Charles M. Hannum. All rights reserved. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)if_le.c 8.2 (Berkeley) 11/16/93 */ #include "bpfilter.h" #include #include #include #include #include #include #include #ifdef INET #include #include #endif #include #include #include #include #ifdef pmax #define wbflush() MachEmptyWriteBuffer() /* This should be in a header file, but where? */ extern struct cfdriver mainbuscd; /* XXX really 3100/5100 b'board */ #include #include #include #else /* Alpha */ #include #endif /* Alpha */ #include #define LE_NEED_BUF_CONTIG #define LE_NEED_BUF_GAP2 #define LE_NEED_BUF_GAP16 #include /* access LANCE registers */ void lewritereg(); #define LERDWR(cntl, src, dst) { (dst) = (src); wbflush(); } #define LEWREG(src, dst) lewritereg(&(dst), (src)) #define LE_OFFSET_RAM 0x0 #define LE_OFFSET_LANCE 0x100000 #define LE_OFFSET_ROM 0x1c0000 extern caddr_t le_iomem; #define LE_SOFTC(unit) lecd.cd_devs[unit] #define LE_DELAY(x) DELAY(x) int lematch __P((struct device *, void *, void *)); void leattach __P((struct device *, struct device *, void *)); int leintr __P((void *sc)); struct cfdriver lecd = { NULL, "le", lematch, leattach, DV_IFNET, sizeof (struct le_softc) }; integrate void lewrcsr(sc, port, val) struct le_softc *sc; u_int16_t port, val; { struct lereg1 *ler1 = sc->sc_r1; LEWREG(port, ler1->ler1_rap); LERDWR(port, val, ler1->ler1_rdp); } integrate u_int16_t lerdcsr(sc, port) struct le_softc *sc; u_int16_t port; { struct lereg1 *ler1 = sc->sc_r1; u_int16_t val; LEWREG(port, ler1->ler1_rap); LERDWR(0, ler1->ler1_rdp, val); return (val); } int lematch(parent, match, aux) struct device *parent; void *match, *aux; { struct cfdata *cf = match; struct confargs *ca = aux; #ifdef notdef /* XXX */ struct tc_cfloc *tc_locp; struct asic_cfloc *asic_locp; #endif #ifdef notdef /* XXX */ tclocp = (struct tc_cfloc *)cf->cf_loc; #endif /* XXX CHECK BUS */ /* make sure that we're looking for this type of device. */ if (!TC_BUS_MATCHNAME(ca, "PMAD-BA ") && /* untested alpha TC option */ !TC_BUS_MATCHNAME(ca, "PMAD-AA ") && /* KN02 b'board, old option */ !TC_BUS_MATCHNAME(ca, "lance")) /* NetBSD name for b'board */ return (0); #ifdef notdef /* XXX */ /* make sure the unit matches the cfdata */ if ((cf->cf_unit != tap->ta_unit && tap->ta_unit != TA_ANYUNIT) || (tclocp->cf_slot != tap->ta_slot && tclocp->cf_slot != TC_SLOT_WILD) || (tclocp->cf_offset != tap->ta_offset && tclocp->cf_offset != TC_OFFSET_WILD)) return (0); #endif return (1); } void leattach(parent, self, aux) struct device *parent, *self; void *aux; { register struct le_softc *sc = (void *)self; struct confargs *ca = aux; u_char *cp; /* pointer to MAC address */ int i; if (parent->dv_cfdata->cf_driver == &ioasiccd) { /* It's on the system IOCTL ASIC */ volatile u_int *ldp; tc_addr_t dma_mask; sc->sc_r1 = (struct lereg1 *) MACH_PHYS_TO_UNCACHED(ca->ca_addr); #ifdef alpha sc->sc_r1 = TC_DENSE_TO_SPARSE(sc->sc_r1); #endif sc->sc_mem = (void *)MACH_PHYS_TO_UNCACHED(le_iomem); /* XXX */ cp = (u_char *)IOASIC_SYS_ETHER_ADDRESS(ioasic_base); sc->sc_copytodesc = copytobuf_gap2; sc->sc_copyfromdesc = copyfrombuf_gap2; sc->sc_copytobuf = copytobuf_gap16; sc->sc_copyfrombuf = copyfrombuf_gap16; sc->sc_zerobuf = zerobuf_gap16; /* * And enable Lance dma through the asic. */ ldp = (volatile u_int *) (IOASIC_REG_LANCE_DMAPTR(ioasic_base)); dma_mask = ((tc_addr_t)le_iomem << 3); #ifdef alpha /* Set upper 64 bits of DMA mask */ dma_mask = (dma_mask & ~(tc_addr_t)0x1f) | (((tc_addr_t)le_iomem >> 29) & 0x1f); #endif /*alpha*/ *ldp = dma_mask; *(volatile u_int *)IOASIC_REG_CSR(ioasic_base) |= IOASIC_CSR_DMAEN_LANCE; wbflush(); } else if (parent->dv_cfdata->cf_driver == &tccd) { /* It's on the turbochannel proper, or on KN02 baseboard. */ sc->sc_r1 = (struct lereg1 *) (ca->ca_addr + LE_OFFSET_LANCE); sc->sc_mem = (void *) (ca->ca_addr + LE_OFFSET_RAM); cp = (u_char *)(ca->ca_addr + LE_OFFSET_ROM + 2); sc->sc_copytodesc = copytobuf_contig; sc->sc_copyfromdesc = copyfrombuf_contig; sc->sc_copytobuf = copytobuf_contig; sc->sc_copyfrombuf = copyfrombuf_contig; sc->sc_zerobuf = zerobuf_contig; } #ifdef pmax else if (parent->dv_cfdata->cf_driver == &mainbuscd) { /* It's on the baseboard, attached directly to mainbus. */ sc->sc_r1 = (struct lereg1 *)(ca->ca_addr); /*XXX*/ sc->sc_mem = (void *)MACH_PHYS_TO_UNCACHED(0x19000000); /*XXX*/ cp = (u_char *)(MACH_PHYS_TO_UNCACHED(KN01_SYS_CLOCK) + 1); sc->sc_copytodesc = copytobuf_gap2; sc->sc_copyfromdesc = copyfrombuf_gap2; sc->sc_copytobuf = copytobuf_gap2; sc->sc_copyfrombuf = copyfrombuf_gap2; sc->sc_zerobuf = zerobuf_gap2; } #endif sc->sc_conf3 = 0; sc->sc_addr = 0; sc->sc_memsize = 65536; /* * Get the ethernet address out of rom */ for (i = 0; i < sizeof(sc->sc_arpcom.ac_enaddr); i++) { sc->sc_arpcom.ac_enaddr[i] = *cp; cp += 4; } sc->sc_arpcom.ac_if.if_name = lecd.cd_name; leconfig(sc); BUS_INTR_ESTABLISH(ca, leintr, sc); if (parent->dv_cfdata->cf_driver == &ioasiccd) { /* XXX YEECH!!! */ *(volatile u_int *)IOASIC_REG_IMSK(ioasic_base) |= IOASIC_INTR_LANCE; wbflush(); } } /* * Write a lance register port, reading it back to ensure success. This seems * to be necessary during initialization, since the chip appears to be a bit * pokey sometimes. */ void lewritereg(regptr, val) register volatile u_short *regptr; register u_short val; { register int i = 0; while (*regptr != val) { *regptr = val; wbflush(); if (++i > 10000) { printf("le: Reg did not settle (to x%x): x%x\n", val, *regptr); return; } DELAY(100); } } /* * Routines for accessing the transmit and receive buffers are provided * by am7990.c, because of the LE_NEED_BUF_* macros defined above. * Unfortunately, CPU addressing of these buffers is done in one of * 3 ways: * - contiguous (for the 3max and turbochannel option card) * - gap2, which means shorts (2 bytes) interspersed with short (2 byte) * spaces (for the pmax) * - gap16, which means 16bytes interspersed with 16byte spaces * for buffers which must begin on a 32byte boundary (for 3min and maxine) * The buffer offset is the logical byte offset, assuming contiguous storage. */ #include