/* $NetBSD: rf_driver.c,v 1.115 2007/12/05 08:39:46 ad Exp $ */ /*- * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Greg Oster * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1995 Carnegie-Mellon University. * All rights reserved. * * Author: Mark Holland, Khalil Amiri, Claudson Bornstein, William V. Courtright II, * Robby Findler, Daniel Stodolsky, Rachad Youssef, Jim Zelenka * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ /****************************************************************************** * * rf_driver.c -- main setup, teardown, and access routines for the RAID driver * * all routines are prefixed with rf_ (raidframe), to avoid conficts. * ******************************************************************************/ #include __KERNEL_RCSID(0, "$NetBSD: rf_driver.c,v 1.115 2007/12/05 08:39:46 ad Exp $"); #include "opt_raid_diagnostic.h" #include #include #include #include #include #include "rf_archs.h" #include "rf_threadstuff.h" #include #include "rf_raid.h" #include "rf_dag.h" #include "rf_aselect.h" #include "rf_diskqueue.h" #include "rf_parityscan.h" #include "rf_alloclist.h" #include "rf_dagutils.h" #include "rf_utils.h" #include "rf_etimer.h" #include "rf_acctrace.h" #include "rf_general.h" #include "rf_desc.h" #include "rf_states.h" #include "rf_decluster.h" #include "rf_map.h" #include "rf_revent.h" #include "rf_callback.h" #include "rf_engine.h" #include "rf_mcpair.h" #include "rf_nwayxor.h" #include "rf_copyback.h" #include "rf_driver.h" #include "rf_options.h" #include "rf_shutdown.h" #include "rf_kintf.h" #include #ifndef RF_ACCESS_DEBUG #define RF_ACCESS_DEBUG 0 #endif /* rad == RF_RaidAccessDesc_t */ RF_DECLARE_MUTEX(rf_rad_lock) #define RF_MAX_FREE_RAD 128 #define RF_MIN_FREE_RAD 32 /* debug variables */ char rf_panicbuf[2048]; /* a buffer to hold an error msg when we panic */ /* main configuration routines */ static int raidframe_booted = 0; static void rf_ConfigureDebug(RF_Config_t * cfgPtr); static void set_debug_option(char *name, long val); static void rf_UnconfigureArray(void); static void rf_ShutdownRDFreeList(void *); static int rf_ConfigureRDFreeList(RF_ShutdownList_t **); RF_DECLARE_MUTEX(rf_printf_mutex) /* debug only: avoids interleaved * printfs by different stripes */ #define SIGNAL_QUIESCENT_COND(_raid_) wakeup(&((_raid_)->accesses_suspended)) #define WAIT_FOR_QUIESCENCE(_raid_) \ ltsleep(&((_raid_)->accesses_suspended), PRIBIO, \ "raidframe quiesce", 0, &((_raid_)->access_suspend_mutex)) static int configureCount = 0; /* number of active configurations */ static int isconfigged = 0; /* is basic raidframe (non per-array) * stuff configged */ RF_DECLARE_LKMGR_STATIC_MUTEX(configureMutex) /* used to lock the configuration * stuff */ static RF_ShutdownList_t *globalShutdown; /* non array-specific * stuff */ static int rf_ConfigureRDFreeList(RF_ShutdownList_t ** listp); static int rf_AllocEmergBuffers(RF_Raid_t *); static void rf_FreeEmergBuffers(RF_Raid_t *); /* called at system boot time */ int rf_BootRaidframe() { if (raidframe_booted) return (EBUSY); raidframe_booted = 1; mutex_init(&configureMutex, MUTEX_DEFAULT, IPL_NONE); configureCount = 0; isconfigged = 0; globalShutdown = NULL; return (0); } /* * Called whenever an array is shutdown */ static void rf_UnconfigureArray() { RF_LOCK_LKMGR_MUTEX(configureMutex); if (--configureCount == 0) { /* if no active configurations, shut * everything down */ isconfigged = 0; rf_ShutdownList(&globalShutdown); /* * We must wait until now, because the AllocList module * uses the DebugMem module. */ #if RF_DEBUG_MEM if (rf_memDebug) rf_print_unfreed(); #endif } RF_UNLOCK_LKMGR_MUTEX(configureMutex); } /* * Called to shut down an array. */ int rf_Shutdown(RF_Raid_t *raidPtr) { if (!raidPtr->valid) { RF_ERRORMSG("Attempt to shut down unconfigured RAIDframe driver. Aborting shutdown\n"); return (EINVAL); } /* * wait for outstanding IOs to land * As described in rf_raid.h, we use the rad_freelist lock * to protect the per-array info about outstanding descs * since we need to do freelist locking anyway, and this * cuts down on the amount of serialization we've got going * on. */ RF_LOCK_MUTEX(rf_rad_lock); if (raidPtr->waitShutdown) { RF_UNLOCK_MUTEX(rf_rad_lock); return (EBUSY); } raidPtr->waitShutdown = 1; while (raidPtr->nAccOutstanding) { RF_WAIT_COND(raidPtr->outstandingCond, rf_rad_lock); } RF_UNLOCK_MUTEX(rf_rad_lock); /* Wait for any parity re-writes to stop... */ while (raidPtr->parity_rewrite_in_progress) { printf("Waiting for parity re-write to exit...\n"); tsleep(&raidPtr->parity_rewrite_in_progress, PRIBIO, "rfprwshutdown", 0); } raidPtr->valid = 0; rf_update_component_labels(raidPtr, RF_FINAL_COMPONENT_UPDATE); rf_UnconfigureVnodes(raidPtr); rf_FreeEmergBuffers(raidPtr); rf_ShutdownList(&raidPtr->shutdownList); rf_UnconfigureArray(); return (0); } #define DO_INIT_CONFIGURE(f) { \ rc = f (&globalShutdown); \ if (rc) { \ RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ rf_ShutdownList(&globalShutdown); \ configureCount--; \ RF_UNLOCK_LKMGR_MUTEX(configureMutex); \ return(rc); \ } \ } #define DO_RAID_FAIL() { \ rf_UnconfigureVnodes(raidPtr); \ rf_FreeEmergBuffers(raidPtr); \ rf_ShutdownList(&raidPtr->shutdownList); \ rf_UnconfigureArray(); \ } #define DO_RAID_INIT_CONFIGURE(f) { \ rc = f (&raidPtr->shutdownList, raidPtr, cfgPtr); \ if (rc) { \ RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ DO_RAID_FAIL(); \ return(rc); \ } \ } #define DO_RAID_MUTEX(_m_) { \ rf_mutex_init((_m_)); \ } int rf_Configure(RF_Raid_t *raidPtr, RF_Config_t *cfgPtr, RF_AutoConfig_t *ac) { RF_RowCol_t col; int rc; RF_LOCK_LKMGR_MUTEX(configureMutex); configureCount++; if (isconfigged == 0) { rf_mutex_init(&rf_printf_mutex); /* initialize globals */ DO_INIT_CONFIGURE(rf_ConfigureAllocList); /* * Yes, this does make debugging general to the whole * system instead of being array specific. Bummer, drag. */ rf_ConfigureDebug(cfgPtr); DO_INIT_CONFIGURE(rf_ConfigureDebugMem); #if RF_ACC_TRACE > 0 DO_INIT_CONFIGURE(rf_ConfigureAccessTrace); #endif DO_INIT_CONFIGURE(rf_ConfigureMapModule); DO_INIT_CONFIGURE(rf_ConfigureReconEvent); DO_INIT_CONFIGURE(rf_ConfigureCallback); DO_INIT_CONFIGURE(rf_ConfigureRDFreeList); DO_INIT_CONFIGURE(rf_ConfigureNWayXor); DO_INIT_CONFIGURE(rf_ConfigureStripeLockFreeList); DO_INIT_CONFIGURE(rf_ConfigureMCPair); DO_INIT_CONFIGURE(rf_ConfigureDAGs); DO_INIT_CONFIGURE(rf_ConfigureDAGFuncs); DO_INIT_CONFIGURE(rf_ConfigureReconstruction); DO_INIT_CONFIGURE(rf_ConfigureCopyback); DO_INIT_CONFIGURE(rf_ConfigureDiskQueueSystem); DO_INIT_CONFIGURE(rf_ConfigurePSStatus); isconfigged = 1; } RF_UNLOCK_LKMGR_MUTEX(configureMutex); DO_RAID_MUTEX(&raidPtr->mutex); /* set up the cleanup list. Do this after ConfigureDebug so that * value of memDebug will be set */ rf_MakeAllocList(raidPtr->cleanupList); if (raidPtr->cleanupList == NULL) { DO_RAID_FAIL(); return (ENOMEM); } rf_ShutdownCreate(&raidPtr->shutdownList, (void (*) (void *)) rf_FreeAllocList, raidPtr->cleanupList); raidPtr->numCol = cfgPtr->numCol; raidPtr->numSpare = cfgPtr->numSpare; raidPtr->status = rf_rs_optimal; raidPtr->reconControl = NULL; TAILQ_INIT(&(raidPtr->iodone)); simple_lock_init(&(raidPtr->iodone_lock)); DO_RAID_INIT_CONFIGURE(rf_ConfigureEngine); DO_RAID_INIT_CONFIGURE(rf_ConfigureStripeLocks); raidPtr->outstandingCond = 0; raidPtr->nAccOutstanding = 0; raidPtr->waitShutdown = 0; DO_RAID_MUTEX(&raidPtr->access_suspend_mutex); raidPtr->waitForReconCond = 0; if (ac!=NULL) { /* We have an AutoConfig structure.. Don't do the normal disk configuration... call the auto config stuff */ rf_AutoConfigureDisks(raidPtr, cfgPtr, ac); } else { DO_RAID_INIT_CONFIGURE(rf_ConfigureDisks); DO_RAID_INIT_CONFIGURE(rf_ConfigureSpareDisks); } /* do this after ConfigureDisks & ConfigureSpareDisks to be sure dev * no. is set */ DO_RAID_INIT_CONFIGURE(rf_ConfigureDiskQueues); DO_RAID_INIT_CONFIGURE(rf_ConfigureLayout); /* Initialize per-RAID PSS bits */ rf_InitPSStatus(raidPtr); #if RF_INCLUDE_CHAINDECLUSTER > 0 for (col = 0; col < raidPtr->numCol; col++) { /* * XXX better distribution */ raidPtr->hist_diskreq[col] = 0; } #endif raidPtr->numNewFailures = 0; raidPtr->copyback_in_progress = 0; raidPtr->parity_rewrite_in_progress = 0; raidPtr->adding_hot_spare = 0; raidPtr->recon_in_progress = 0; raidPtr->maxOutstanding = cfgPtr->maxOutstandingDiskReqs; /* autoconfigure and root_partition will actually get filled in after the config is done */ raidPtr->autoconfigure = 0; raidPtr->root_partition = 0; raidPtr->last_unit = raidPtr->raidid; raidPtr->config_order = 0; if (rf_keepAccTotals) { raidPtr->keep_acc_totals = 1; } /* Allocate a bunch of buffers to be used in low-memory conditions */ raidPtr->iobuf = NULL; rc = rf_AllocEmergBuffers(raidPtr); if (rc) { printf("raid%d: Unable to allocate emergency buffers.\n", raidPtr->raidid); DO_RAID_FAIL(); return(rc); } raidPtr->valid = 1; printf("raid%d: %s\n", raidPtr->raidid, raidPtr->Layout.map->configName); printf("raid%d: Components:", raidPtr->raidid); for (col = 0; col < raidPtr->numCol; col++) { printf(" %s", raidPtr->Disks[col].devname); if (RF_DEAD_DISK(raidPtr->Disks[col].status)) { printf("[**FAILED**]"); } } printf("\n"); printf("raid%d: Total Sectors: %lu (%lu MB)\n", raidPtr->raidid, (unsigned long) raidPtr->totalSectors, (unsigned long) (raidPtr->totalSectors / 1024 * (1 << raidPtr->logBytesPerSector) / 1024)); return (0); } /* Routines to allocate and free the "emergency buffers" for a given RAID set. These emergency buffers will be used when the kernel runs out of kernel memory. */ static int rf_AllocEmergBuffers(RF_Raid_t *raidPtr) { void *tmpbuf; RF_VoidPointerListElem_t *vple; int i; /* XXX next line needs tuning... */ raidPtr->numEmergencyBuffers = 10 * raidPtr->numCol; #if DEBUG printf("raid%d: allocating %d buffers of %d bytes.\n", raidPtr->raidid, raidPtr->numEmergencyBuffers, (int)(raidPtr->Layout.sectorsPerStripeUnit << raidPtr->logBytesPerSector)); #endif for (i = 0; i < raidPtr->numEmergencyBuffers; i++) { tmpbuf = malloc( raidPtr->Layout.sectorsPerStripeUnit << raidPtr->logBytesPerSector, M_RAIDFRAME, M_WAITOK); if (tmpbuf) { vple = rf_AllocVPListElem(); vple->p= tmpbuf; vple->next = raidPtr->iobuf; raidPtr->iobuf = vple; raidPtr->iobuf_count++; } else { printf("raid%d: failed to allocate emergency buffer!\n", raidPtr->raidid); return 1; } } /* XXX next line needs tuning too... */ raidPtr->numEmergencyStripeBuffers = 10; for (i = 0; i < raidPtr->numEmergencyStripeBuffers; i++) { tmpbuf = malloc( raidPtr->numCol * (raidPtr->Layout.sectorsPerStripeUnit << raidPtr->logBytesPerSector), M_RAIDFRAME, M_WAITOK); if (tmpbuf) { vple = rf_AllocVPListElem(); vple->p= tmpbuf; vple->next = raidPtr->stripebuf; raidPtr->stripebuf = vple; raidPtr->stripebuf_count++; } else { printf("raid%d: failed to allocate emergency stripe buffer!\n", raidPtr->raidid); return 1; } } return (0); } static void rf_FreeEmergBuffers(RF_Raid_t *raidPtr) { RF_VoidPointerListElem_t *tmp; /* Free the emergency IO buffers */ while (raidPtr->iobuf != NULL) { tmp = raidPtr->iobuf; raidPtr->iobuf = raidPtr->iobuf->next; free(tmp->p, M_RAIDFRAME); rf_FreeVPListElem(tmp); } /* Free the emergency stripe buffers */ while (raidPtr->stripebuf != NULL) { tmp = raidPtr->stripebuf; raidPtr->stripebuf = raidPtr->stripebuf->next; free(tmp->p, M_RAIDFRAME); rf_FreeVPListElem(tmp); } } static void rf_ShutdownRDFreeList(void *ignored) { pool_destroy(&rf_pools.rad); } static int rf_ConfigureRDFreeList(RF_ShutdownList_t **listp) { rf_pool_init(&rf_pools.rad, sizeof(RF_RaidAccessDesc_t), "rf_rad_pl", RF_MIN_FREE_RAD, RF_MAX_FREE_RAD); rf_ShutdownCreate(listp, rf_ShutdownRDFreeList, NULL); simple_lock_init(&rf_rad_lock); return (0); } RF_RaidAccessDesc_t * rf_AllocRaidAccDesc(RF_Raid_t *raidPtr, RF_IoType_t type, RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, void *bufPtr, void *bp, RF_RaidAccessFlags_t flags, const RF_AccessState_t *states) { RF_RaidAccessDesc_t *desc; desc = pool_get(&rf_pools.rad, PR_WAITOK); RF_LOCK_MUTEX(rf_rad_lock); if (raidPtr->waitShutdown) { /* * Actually, we're shutting the array down. Free the desc * and return NULL. */ RF_UNLOCK_MUTEX(rf_rad_lock); pool_put(&rf_pools.rad, desc); return (NULL); } raidPtr->nAccOutstanding++; RF_UNLOCK_MUTEX(rf_rad_lock); desc->raidPtr = (void *) raidPtr; desc->type = type; desc->raidAddress = raidAddress; desc->numBlocks = numBlocks; desc->bufPtr = bufPtr; desc->bp = bp; desc->flags = flags; desc->states = states; desc->state = 0; desc->dagList = NULL; desc->status = 0; desc->numRetries = 0; #if RF_ACC_TRACE > 0 memset((char *) &desc->tracerec, 0, sizeof(RF_AccTraceEntry_t)); #endif desc->callbackFunc = NULL; desc->callbackArg = NULL; desc->next = NULL; desc->iobufs = NULL; desc->stripebufs = NULL; return (desc); } void rf_FreeRaidAccDesc(RF_RaidAccessDesc_t *desc) { RF_Raid_t *raidPtr = desc->raidPtr; RF_DagList_t *dagList, *temp; RF_VoidPointerListElem_t *tmp; RF_ASSERT(desc); /* Cleanup the dagList(s) */ dagList = desc->dagList; while(dagList != NULL) { temp = dagList; dagList = dagList->next; rf_FreeDAGList(temp); } while (desc->iobufs) { tmp = desc->iobufs; desc->iobufs = desc->iobufs->next; rf_FreeIOBuffer(raidPtr, tmp); } while (desc->stripebufs) { tmp = desc->stripebufs; desc->stripebufs = desc->stripebufs->next; rf_FreeStripeBuffer(raidPtr, tmp); } pool_put(&rf_pools.rad, desc); RF_LOCK_MUTEX(rf_rad_lock); raidPtr->nAccOutstanding--; if (raidPtr->waitShutdown) { RF_SIGNAL_COND(raidPtr->outstandingCond); } RF_UNLOCK_MUTEX(rf_rad_lock); } /********************************************************************* * Main routine for performing an access. * Accesses are retried until a DAG can not be selected. This occurs * when either the DAG library is incomplete or there are too many * failures in a parity group. * * type should be read or write async_flag should be RF_TRUE or * RF_FALSE bp_in is a buf pointer. void *to facilitate ignoring it * outside the kernel ********************************************************************/ int rf_DoAccess(RF_Raid_t * raidPtr, RF_IoType_t type, int async_flag, RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, void *bufPtr, struct buf *bp, RF_RaidAccessFlags_t flags) { RF_RaidAccessDesc_t *desc; void *lbufPtr = bufPtr; raidAddress += rf_raidSectorOffset; #if RF_ACCESS_DEBUG if (rf_accessDebug) { printf("logBytes is: %d %d %d\n", raidPtr->raidid, raidPtr->logBytesPerSector, (int) rf_RaidAddressToByte(raidPtr, numBlocks)); printf("raid%d: %s raidAddr %d (stripeid %d-%d) numBlocks %d (%d bytes) buf 0x%lx\n", raidPtr->raidid, (type == RF_IO_TYPE_READ) ? "READ" : "WRITE", (int) raidAddress, (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress), (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress + numBlocks - 1), (int) numBlocks, (int) rf_RaidAddressToByte(raidPtr, numBlocks), (long) bufPtr); } #endif desc = rf_AllocRaidAccDesc(raidPtr, type, raidAddress, numBlocks, lbufPtr, bp, flags, raidPtr->Layout.map->states); if (desc == NULL) { return (ENOMEM); } #if RF_ACC_TRACE > 0 RF_ETIMER_START(desc->tracerec.tot_timer); #endif desc->async_flag = async_flag; rf_ContinueRaidAccess(desc); return (0); } #if 0 /* force the array into reconfigured mode without doing reconstruction */ int rf_SetReconfiguredMode(RF_Raid_t *raidPtr, int col) { if (!(raidPtr->Layout.map->flags & RF_DISTRIBUTE_SPARE)) { printf("Can't set reconfigured mode in dedicated-spare array\n"); RF_PANIC(); } RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->numFailures++; raidPtr->Disks[col].status = rf_ds_dist_spared; raidPtr->status = rf_rs_reconfigured; rf_update_component_labels(raidPtr, RF_NORMAL_COMPONENT_UPDATE); /* install spare table only if declustering + distributed sparing * architecture. */ if (raidPtr->Layout.map->flags & RF_BD_DECLUSTERED) rf_InstallSpareTable(raidPtr, col); RF_UNLOCK_MUTEX(raidPtr->mutex); return (0); } #endif int rf_FailDisk(RF_Raid_t *raidPtr, int fcol, int initRecon) { /* need to suspend IO's here -- if there are DAGs in flight and we pull the rug out from under ci_vp, Bad Things can happen. */ rf_SuspendNewRequestsAndWait(raidPtr); RF_LOCK_MUTEX(raidPtr->mutex); if (raidPtr->Disks[fcol].status != rf_ds_failed) { /* must be failing something that is valid, or else it's already marked as failed (in which case we don't want to mark it failed again!) */ raidPtr->numFailures++; raidPtr->Disks[fcol].status = rf_ds_failed; raidPtr->status = rf_rs_degraded; } RF_UNLOCK_MUTEX(raidPtr->mutex); rf_update_component_labels(raidPtr, RF_NORMAL_COMPONENT_UPDATE); /* Close the component, so that it's not "locked" if someone else want's to use it! */ rf_close_component(raidPtr, raidPtr->raid_cinfo[fcol].ci_vp, raidPtr->Disks[fcol].auto_configured); RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->raid_cinfo[fcol].ci_vp = NULL; /* Need to mark the component as not being auto_configured (in case it was previously). */ raidPtr->Disks[fcol].auto_configured = 0; RF_UNLOCK_MUTEX(raidPtr->mutex); /* now we can allow IO to continue -- we'll be suspending it again in rf_ReconstructFailedDisk() if we have to.. */ rf_ResumeNewRequests(raidPtr); if (initRecon) rf_ReconstructFailedDisk(raidPtr, fcol); return (0); } /* releases a thread that is waiting for the array to become quiesced. * access_suspend_mutex should be locked upon calling this */ void rf_SignalQuiescenceLock(RF_Raid_t *raidPtr) { #if RF_DEBUG_QUIESCE if (rf_quiesceDebug) { printf("raid%d: Signalling quiescence lock\n", raidPtr->raidid); } #endif raidPtr->access_suspend_release = 1; if (raidPtr->waiting_for_quiescence) { SIGNAL_QUIESCENT_COND(raidPtr); } } /* suspends all new requests to the array. No effect on accesses that are in flight. */ int rf_SuspendNewRequestsAndWait(RF_Raid_t *raidPtr) { #if RF_DEBUG_QUIESCE if (rf_quiesceDebug) printf("raid%d: Suspending new reqs\n", raidPtr->raidid); #endif RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); raidPtr->accesses_suspended++; raidPtr->waiting_for_quiescence = (raidPtr->accs_in_flight == 0) ? 0 : 1; if (raidPtr->waiting_for_quiescence) { raidPtr->access_suspend_release = 0; while (!raidPtr->access_suspend_release) { #if RF_DEBUG_QUIESCE printf("raid%d: Suspending: Waiting for Quiescence\n", raidPtr->raidid); #endif WAIT_FOR_QUIESCENCE(raidPtr); raidPtr->waiting_for_quiescence = 0; } } #if RF_DEBUG_QUIESCE printf("raid%d: Quiescence reached..\n", raidPtr->raidid); #endif RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); return (raidPtr->waiting_for_quiescence); } /* wake up everyone waiting for quiescence to be released */ void rf_ResumeNewRequests(RF_Raid_t *raidPtr) { RF_CallbackDesc_t *t, *cb; #if RF_DEBUG_QUIESCE if (rf_quiesceDebug) printf("Resuming new reqs\n"); #endif RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); raidPtr->accesses_suspended--; if (raidPtr->accesses_suspended == 0) cb = raidPtr->quiesce_wait_list; else cb = NULL; raidPtr->quiesce_wait_list = NULL; RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); while (cb) { t = cb; cb = cb->next; (t->callbackFunc) (t->callbackArg); rf_FreeCallbackDesc(t); } } /***************************************************************************************** * * debug routines * ****************************************************************************************/ static void set_debug_option(char *name, long val) { RF_DebugName_t *p; for (p = rf_debugNames; p->name; p++) { if (!strcmp(p->name, name)) { *(p->ptr) = val; printf("[Set debug variable %s to %ld]\n", name, val); return; } } RF_ERRORMSG1("Unknown debug string \"%s\"\n", name); } /* would like to use sscanf here, but apparently not available in kernel */ /*ARGSUSED*/ static void rf_ConfigureDebug(RF_Config_t *cfgPtr) { char *val_p, *name_p, *white_p; long val; int i; rf_ResetDebugOptions(); for (i = 0; cfgPtr->debugVars[i][0] && i < RF_MAXDBGV; i++) { name_p = rf_find_non_white(&cfgPtr->debugVars[i][0]); white_p = rf_find_white(name_p); /* skip to start of 2nd * word */ val_p = rf_find_non_white(white_p); if (*val_p == '0' && *(val_p + 1) == 'x') val = rf_htoi(val_p + 2); else val = rf_atoi(val_p); *white_p = '\0'; set_debug_option(name_p, val); } } void rf_print_panic_message(int line, const char *file) { snprintf(rf_panicbuf, sizeof(rf_panicbuf), "raidframe error at line %d file %s", line, file); } #ifdef RAID_DIAGNOSTIC void rf_print_assert_panic_message(int line, const char *file, const char *condition) { snprintf(rf_panicbuf, sizeof(rf_panicbuf), "raidframe error at line %d file %s (failed asserting %s)\n", line, file, condition); } #endif void rf_print_unable_to_init_mutex(const char *file, int line, int rc) { RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", file, line, rc); } void rf_print_unable_to_add_shutdown(const char *file, int line, int rc) { RF_ERRORMSG3("Unable to add to shutdown list file %s line %d rc=%d\n", file, line, rc); }