/* $NetBSD: auxio.c,v 1.9 2002/10/02 16:02:17 thorpej Exp $ */ /* * Copyright (c) 2000, 2001 Matthew R. Green * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * AUXIO registers support on the sbus & ebus2, used for the floppy driver * and to control the system LED, for the BLINK option. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* * on sun4u, auxio exists with one register (LED) on the sbus, and 5 * registers on the ebus2 (pci) (LED, PCIMODE, FREQUENCY, SCSI * OSCILLATOR, and TEMP SENSE. */ struct auxio_softc { struct device sc_dev; /* parent's tag */ bus_space_tag_t sc_tag; /* handles to the various auxio regsiter sets */ bus_space_handle_t sc_led; bus_space_handle_t sc_pci; bus_space_handle_t sc_freq; bus_space_handle_t sc_scsi; bus_space_handle_t sc_temp; int sc_flags; #define AUXIO_LEDONLY 0x1 #define AUXIO_EBUS 0x2 #define AUXIO_SBUS 0x4 }; #define AUXIO_ROM_NAME "auxio" void auxio_attach_common(struct auxio_softc *); int auxio_ebus_match(struct device *, struct cfdata *, void *); void auxio_ebus_attach(struct device *, struct device *, void *); int auxio_sbus_match(struct device *, struct cfdata *, void *); void auxio_sbus_attach(struct device *, struct device *, void *); CFATTACH_DECL(auxio_ebus, sizeof(struct auxio_softc), auxio_ebus_match, auxio_ebus_attach, NULL, NULL); CFATTACH_DECL(auxio_sbus, sizeof(struct auxio_softc), auxio_sbus_match, auxio_sbus_attach, NULL, NULL); #ifdef BLINK static struct callout blink_ch = CALLOUT_INITIALIZER; static void auxio_blink(void *); static void auxio_blink(x) void *x; { struct auxio_softc *sc = x; int s; u_int32_t led; s = splhigh(); if (sc->sc_flags & AUXIO_EBUS) led = le32toh(bus_space_read_4(sc->sc_tag, sc->sc_led, 0)); else led = bus_space_read_1(sc->sc_tag, sc->sc_led, 0); if (led & AUXIO_LED_LED) led = 0; else led = AUXIO_LED_LED; if (sc->sc_flags & AUXIO_EBUS) bus_space_write_4(sc->sc_tag, sc->sc_led, 0, htole32(led)); else bus_space_write_1(sc->sc_tag, sc->sc_led, 0, led); splx(s); /* * Blink rate is: * full cycle every second if completely idle (loadav = 0) * full cycle every 2 seconds if loadav = 1 * full cycle every 3 seconds if loadav = 2 * etc. */ s = (((averunnable.ldavg[0] + FSCALE) * hz) >> (FSHIFT + 1)); callout_reset(&blink_ch, s, auxio_blink, sc); } #endif void auxio_attach_common(sc) struct auxio_softc *sc; { #ifdef BLINK static int do_once = 1; /* only start one blinker */ if (do_once) { auxio_blink(sc); do_once = 0; } #endif printf("\n"); } int auxio_ebus_match(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct ebus_attach_args *ea = aux; return (strcmp(AUXIO_ROM_NAME, ea->ea_name) == 0); } void auxio_ebus_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct auxio_softc *sc = (struct auxio_softc *)self; struct ebus_attach_args *ea = aux; sc->sc_tag = ea->ea_bustag; if (ea->ea_nreg < 1) { printf(": no registers??\n"); return; } if (ea->ea_nreg != 5) { printf(": not 5 (%d) registers, only setting led", ea->ea_nreg); sc->sc_flags = AUXIO_LEDONLY|AUXIO_EBUS; } else if (ea->ea_nvaddr == 5) { sc->sc_flags = AUXIO_EBUS; sparc_promaddr_to_handle(sc->sc_tag, ea->ea_vaddr[1], &sc->sc_pci); sparc_promaddr_to_handle(sc->sc_tag, ea->ea_vaddr[2], &sc->sc_freq); sparc_promaddr_to_handle(sc->sc_tag, ea->ea_vaddr[3], &sc->sc_scsi); sparc_promaddr_to_handle(sc->sc_tag, ea->ea_vaddr[4], &sc->sc_temp); } else { sc->sc_flags = AUXIO_EBUS; bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[1]), ea->ea_reg[1].size, 0, &sc->sc_pci); bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[2]), ea->ea_reg[2].size, 0, &sc->sc_freq); bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[3]), ea->ea_reg[3].size, 0, &sc->sc_scsi); bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[4]), ea->ea_reg[4].size, 0, &sc->sc_temp); } if (ea->ea_nvaddr > 0) { sparc_promaddr_to_handle(sc->sc_tag, ea->ea_vaddr[0], &sc->sc_led); } else { bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[0]), ea->ea_reg[0].size, 0, &sc->sc_led); } auxio_attach_common(sc); } int auxio_sbus_match(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct sbus_attach_args *sa = aux; return (strcmp(AUXIO_ROM_NAME, sa->sa_name) == 0); } void auxio_sbus_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct auxio_softc *sc = (struct auxio_softc *)self; struct sbus_attach_args *sa = aux; sc->sc_tag = sa->sa_bustag; if (sa->sa_nreg < 1) { printf(": no registers??\n"); return; } if (sa->sa_nreg != 1) { printf(": not 1 (%d/%d) registers??", sa->sa_nreg, sa->sa_npromvaddrs); return; } /* sbus auxio only has one set of registers */ sc->sc_flags = AUXIO_LEDONLY|AUXIO_SBUS; if (sa->sa_npromvaddrs > 0) { sbus_promaddr_to_handle(sc->sc_tag, sa->sa_promvaddr, &sc->sc_led); } else { sbus_bus_map(sc->sc_tag, sa->sa_slot, sa->sa_offset, sa->sa_size, 0, &sc->sc_led); } auxio_attach_common(sc); }