; $NetBSD: grf_ultms.g,v 1.7 2002/05/26 12:53:22 jdolecek Exp $ ; ; ite support for A2410. ; ; Copyright (c) 1995 Ignatios Souvatzis. ; All rights reserved. ; ; Redistribution and use in source and binary forms, with or without ; modification, are permitted provided that the following conditions ; are met: ; 1. Redistributions of source code must retain the above copyright ; notice, this list of conditions and the following disclaimer. ; 2. Redistributions in binary form must reproduce the above copyright ; notice, this list of conditions and the following disclaimer in the ; documentation and/or other materials provided with the distribution. ; 3. All advertising materials mentioning features or use of this software ; must display the following acknowledgement: ; This product contains software developed by Ignatios Souvatzis ; for the NetBSD project. ; 4. The name of the author may not be used to endorse or promote products ; derived from this software without specific prior written permission ; ; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ; IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ; NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ; THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; This file contains the source code for grf_ultmscode.c. It is ; assembler code for the TMS34010 CPU/graphics processor. ; ; Use Paul Mackerras' gspa assembler to transfer it to hex format, then ; Ignatios Souvatzis' gpsahextoc utility to convert it to grf_ultmscode.c. ; ; Use 'make grf_ultms.c' to generate the .c file. ; memory map: ; FF800000 .. FF9FFFFF overlay planes ; FFA00000 .. FFA0FFFF ite support code ; FFA10000 .. FFA1FFFF ite support, input queue ; FFA20000 .. FFA2FEFF variables ; FFA2FF00 .. FFA2FFFF variables, X server ; FFA30000 .. FFA3FFFF font data ; FFA40000 .. FFA4FFFF font data, bold ; FFA50000 .. FFA5FFFF X server, input queue ; FFA60000 .. FFFFC000 X server, onboard pixmaps ; Start of data area .org $FFA20000 d: ; ; Ring buffer for getting stuff from host ; Data buffer: inbuf = $FFA10000 ; 64kbits here (8k bytes) ; ; Pointers: (these must be at address $FFA20000) put: .long inbuf get: .long inbuf ; ; Mode bits for communication between GSP and CPU ; ; GSP mode bits: set by CPU, control GSP operation GSP_HOLD = 0 GSP_FLUSH = 1 GSP_ALT_SCRN = 2 GSP_DISP_CTRL = 3 GSP_NO_CURSOR = 4 GSP_CALL_X = 5 gsp_mode: .word 0 ; ; Pointer to X operation routine xproc: .long 0 ; We leave the next few words for future communication requirements .org d+0x100 ; ; Other data: magic: .blkl 1 ; set => screen already inited MAGIC = 0xD0D0BEAC screen_width: .word 1024 screen_height: .word 768 screen_origin: .long $FE000000 ; just a placeholder screen_pitch: .word 8192 ; 1024*8 pixel_size: .word 8 .org d+0x200 font_adr: ; ; Font information is stored in the structure defined declared below. ; bitmap_ptrs: .long $FFA30000 ; points to first bitmap font_size: .long $00080008 ; Y:X bitmap size under_row: .word 6 ; row # for underlines under_ht: .word 1 ; thickness of underline first_char: .word 32 ; first and last char in font last_char: .word 255 ; bold_smear: .word 1 ; for making bold fonts bgcolor: .long 0 ; background color fgcolor: .long $01010101 ; foreground color ;precomputed out of what the host gave us: font_area: .word 64 ; in pixels font_pitch: .word 8 font_lmo: .word 28 ; Control register addresses hesync = $c0000000 dpyctl = $c0000080 control = $c00000b0 convsp = $c0000130 convdp = $c0000140 psize = $c0000150 ; ; Bits in control register T = $20 ; enable transparency W = $C0 ; window options PBH = $100 ; pixblt horiz dirn PBV = $200 ; pixblt vertical dirn PPOP = $7C00 ; pixel processing options ; ; Bits in dpyctl register SRT = $800 ; do serial register transfers free_memory: .long free_memory_start free_memory_start: ; allocate dynamic arrays from here ; ; Program starts here. .org $FFA00000 .start . ; ; initialization ; setf 16,0,0 ; just in case setf 32,0,1 move $fffff000,sp ; Set up sync, blank parameters ; done by host through interface ; set up overlay clut: move $0,a0 move a0,@$fe800000 move $fe800030,a1 move 128,a0 move a0,*a1 move a0,*a1 move a0,*a1 move 0,a0 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 move a0,*a1 ; set up overlay planes: move 6,a0 move a0,@$fe800000 move $0b,a0 move a0,@$fe800020 ; set up global registers move @screen_pitch,b3,0 move @screen_origin,b4,1 move @bgcolor,b8,1 lmo b3,b0 move b0,@convdp,0 move @control,a0,0 andn $7FE0,a0 ; clear PPOP, PBV, PBH, W, T fields move a0,@control,0 move @pixel_size,a0,0 move a0,@psize,0 move @psize,a0,0 ; clear the entire screen move b4,b2 move 0,b9 move @screen_width,b7,1 fill l 4: ; main stuff... move @get,a0,1 jruc main_loop loop_end: clr a4 move a4,*a0,0 addxy a1,a0 move a0,@get,1 main_loop: move @gsp_mode,a1,0 btst GSP_CALL_X,a1 jreq main_loop_1 mmtm sp,a0,a1,a2,a3 move @xproc,a4,1 call a4 mmfm sp,a0,a1,a2,a3 main_loop_1: move @put,a3,1 move *a0,a1,0 move a1,a2 andi $FFF0,a1 jrz main_loop sub a0,a3 jreq main_loop continue: andi $F,a2 jrz loop_end dec a2 jrnz testfor2 ; op 1 - char movk 6,b10 move b10,@$fe800000,0 movk 1,b10 move b10,@$fe800020,0 move a0,b10 move *b10+,b12,0 ; dummy move (faster than addk) move *b10+,b12,0 ; char code move @first_char,b11,0 sub b11,b12 ; minus first char in font move @font_size,b7,1 ;dydx - char size->pixel array dimensions move @font_pitch,b1 move @font_lmo,b0 move b0,@convsp,0 move @font_area,b11 mpyu b12,b11 ; times char offset move @font_adr,b0,1 ; font bitmaps base add b11,b0 ; character bitmap start addr. linear move *b10+,b8,0 ; fg move *b10+,b9,0 ; bg move *b10+,b2,1 ; y:x move *b10+,b11,0 ; flags move b11,a4 btst 0,a4 jreq noinv move b8,b11 move b9,b8 move b11,b9 noinv: btst 2,a4 jreq nobold addi $10000,b0 nobold: move b2,a5 pixblt b,xy move a5,b2 btst 1,a4 jreq noul move @under_row,b11,0 sll 16,b11 ; shift into Y half add b11,b2 move @under_ht,b11,0 sll 16,b11 ; shift into Y half movy b11,b7 ; and move Y half only fill xy noul: jruc loop_end testfor2: dec a2 jrnz testfor3 ; op 2 - fill move a0,b10 move *b10+,b9,0 ; dummy move move *b10+,b9,0 ; color move *b10+,b2,1 ; XY start address move *b10+,b7,1 ; dydx move @control,b0,0 move b0,*-sp move *b10+,b0 setf 5,0,0 move b0,@control+10 setf 16,0,0 move @control,b0,0 fill xy move *sp+,b0 move b0,@control,0 jruc loop_end,l testfor3: dec a2 jrnz testfor4 ; op 3 - pixblt move a0,b10 move @convdp,@convsp,0 move *b10+,b0,0 ; dummy move move *b10+,b0,1 ; XY src move *b10+,b7,1 ; dxdy move *b10+,b2,1 ; XY dst move b3,b1 move @control,b11,0 andni PBH|PBV,b11 cmpxy b0,b2 jrc yok ori PBV,b11 yok: jrv xok ori PBH,b11 xok: move b11,@control,0 move @control,b11,0 pixblt xy,xy jruc loop_end,l testfor4: dec a2 jrnz testfor5 ; op 4 - mirror the font and precompute some values. move @font_size,a5,0 movk 8,a6 cmp a6,a5 jrle t4b8 movi 16, a6 t4b8: move a6,@font_pitch,0 lmo a5,a6 move a6,@font_lmo,0 move @font_size+$10,a6,0 move @font_pitch,a5,0 mpyu a6,a5 move a5,@font_area,0 move @last_char,a6,0 move @first_char,a5,0 sub a5,a6 addk 1,a6 move @font_size+$10,a5,0 mpyu a6,a5 move @font_size,a7,0 cmpi 8,a7 move $7f7f,a12 ; mask for bold smearing jrgt t4bf ; wider than 8 pixels? addk 1,a5 ; yes, the words are only half the # of rows srl 1,a5 move $7fff,a12 ; mask for bold smearing changes, too t4bf: move @font_adr,a6,1 move a6,a9 addi $10000,a9 ; start address of bold font move @bold_smear,a10 ; fortunately, this loop fits into 3 of the 4 cache segments: ; execution time: about 32 periods per word of font. mirlp: move *a6,a7 clr a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 srl 1,a7 addc a8,a8 move a8,*a6+ move a8,a7 move a10,a11 smearlp: and a12,a7 sll 1,a7 or a7,a8 dsj a11,smearlp move a8,*a9+ dsj a5,mirlp ;; support odd-sized fonts. pitch must still be 8 or 16 move @font_size,a5,0 move @font_pitch,a6,0 sub a5,a6 move @font_adr,a5,1 add a5,a6 move a6,@font_adr,1 ;; jruc loop_end,l testfor5: dec a2 jrne testfor6 ; loadclut --- load clut entry. ; 1==overlay index red green blue ; for speed reasons, the host will load the image clut directly rather ; than through us, but its not that expensive to support both here ; just in case move a0,a4 addk $10,a4 move $fe800030,a6 move *a4+,a5,0 jrne t5l1 subk $20,a6 t5l1: move *a4+,a5,0 move a5,@$fe800000,0 move *a4+,a5,0 move a5,*a6,0 move *a4+,a5,0 move a5,*a6,0 move *a4+,a5,0 move a5,*a6,0 jruc loop_end,l testfor6: dec a2 jrne testfor7 ; op 6: load new framebuffer size and position for ite support. move a0,b10 addk $10,b10 move *b10+,b7,1 move b7,@screen_width,1 move *b10+,b4,1 move b4,@screen_origin,1 move *b10+,b3,0 move b3,@screen_pitch,0 lmo b3,b0 move b0,@convdp,0 move *b10,b0,0 move b0,@psize,0 move b0,@pixel_size,0 ; this syncs the psize write, too jruc loop_end,l testfor7: jruc loop_end,l ;;;