/* $NetBSD: scsi.h,v 1.4 2000/01/23 21:01:54 soda Exp $ */ /* $OpenBSD: scsi.h,v 1.2 1997/04/19 17:19:54 pefo Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)scsi.h 8.1 (Berkeley) 6/10/93 * * scsi.h -- * * Common declarations for SCSI command formaters. This file only covers * definitions pertaining to the SCSI common command set that are * common to all SCSI device types (ie disk, tapes, WORM, printers, etc). * Some of the references from the proceedings of the * 1984 Mini/Micro Northeast conference might help in understanding SCSI. * * from: Header: /sprite/src/kernel/dev/RCS/scsi.h, * v 9.1 90/02/13 23:11:24 jhh Exp SPRITE (Berkeley) */ #ifndef _SCSI_H #define _SCSI_H /* * "Standard" SCSI Commands. * SCSI commands are divided into 8 groups as follows: * Group0 (0x00 - 0x1f). Basic commands. 6 bytes long * Group1 (0x20 - 0x3f). Extended command. 10 bytes. * Group2 (0x40 - 0x5f). Reserved. * Group2 (0x60 - 0x7f). Reserved. * Group2 (0x80 - 0x9f). Reserved. * Group2 (0xa0 - 0xbf). Reserved. * Group6 (0xc0 - 0xdf). Vendor Unique * Group7 (0xe0 - 0xff). Vendor Unique */ /* * Scsi Group0 commands all are 6 bytes and have a format according to * struct ScsiGroup0Cmd. */ #define SCSI_TEST_UNIT_READY 0x00 #define SCSI_REZERO_UNIT 0x01 #define SCSI_REWIND 0x01 #define SCSI_REQUEST_SENSE 0x03 #define SCSI_FORMAT_UNIT 0x04 #define SCSI_READ_BLOCK_LIMITS 0x05 #define SCSI_REASSIGN_BLOCKS 0x07 #define SCSI_READ 0x08 #define SCSI_WRITE 0x0a #define SCSI_SEEK 0x0b #define SCSI_TRACK_SELECT 0x0b #define SCSI_READ_REVERSE 0x0f #define SCSI_WRITE_EOF 0x10 #define SCSI_SPACE 0x11 #define SCSI_INQUIRY 0x12 #define SCSI_VERIFY 0x13 #define SCSI_READ_BUFFER 0x14 #define SCSI_MODE_SELECT 0x15 #define SCSI_RESERVE_UNIT 0x16 #define SCSI_RELEASE_UNIT 0x17 #define SCSI_COPY 0x18 #define SCSI_ERASE_TAPE 0x19 #define SCSI_MODE_SENSE 0x1a #define SCSI_START_STOP 0x1b #define SCSI_LOAD_UNLOAD 0x1b #define SCSI_RECV_DIAG_RESULTS 0x1c #define SCSI_SEND_DIAGNOSTIC 0x1d #define SCSI_PREVENT_ALLOW 0x1e /* * Group1 commands are all 10 bytes and have a format according to * struct ScsiGroup1Cmd. */ #define SCSI_READ_CAPACITY 0x25 #define SCSI_READ_EXT 0x28 #define SCSI_WRITE_EXT 0x2a #define SCSI_SEEK_EXT 0x2b #define SCSI_WRITE_VERIFY 0x2e #define SCSI_VERIFY_EXT 0x2f #define SCSI_SEARCH_HIGH 0x30 #define SCSI_SEARCH_EQUAL 0x31 #define SCSI_SEARCH_LOW 0x32 #define SCSI_SET_LIMITS 0x33 #define SCSI_COMPARE 0x39 #define SCSI_COPY_VERIFY 0x3a /* * Control byte flags for Group0 and Group1 commands. * * SCSI_CTRL_LINK - This is used to prevent a bus free phase between commands. * If the command terminates successfully, a SCSI_LINKED_CMD_COMPLETE * message is returned instead of the normal SCSI_COMMAND_COMPLETE message. * The last command in a chain should not have this bit set * (and consequently gets a normal SCSI_COMMAND_COMPLETE message). * SCSI_CTRL_LINK_FLAG - This bit should only set when SCSI_CTRL_LINK is set and * causes a SCSI_LINKED_FLAGED_CMD_COMPLETE to be returned instead of * a SCSI_LINKED_CMD_COMPLETE. */ #define SCSI_CTRL_LINK 0x01 /* Link commands (no bus free phase) */ #define SCSI_CTRL_LINK_INTR 0x02 /* Interrupt after linked command */ /* * The standard group0 6-byte SCSI control block. Note that the * fields between highAddr and blockCount inclusive are command dependent. * The definitions Addr and BlockCount cover most of the commands we will * use. */ typedef struct ScsiGroup0Cmd { u_char command; /* command code, defined below. The * upper three bits of this are zero * to indicate the control block is * only 6 bytes long */ #if BYTE_ORDER == BIG_ENDIAN u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ u_char highAddr :5; /* High bits of address */ #else u_char highAddr :5; /* High bits of address */ u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ #endif u_char midAddr; /* Middle bits of address */ u_char lowAddr; /* Low bits of address */ u_char blockCount; /* Blocks to transfer */ u_char control; /* See flags for common bits */ } ScsiGroup0Cmd; /* * Format of a SCSI_START_STOP command. This is a group 0 command, but * the command contents are different. */ typedef struct ScsiStartStopCmd { #if BYTE_ORDER == BIG_ENDIAN u_char command; /* command code, defined below. The * upper three bits of this are zero * to indicate the control block is * only 6 bytes long */ u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ u_char pad1 :4; /* Reserved */ u_char immed :1; /* Immediate status bit */ u_char pad2; /* Reserved */ u_char pad3; /* Reserved */ u_char pad4 :6; /* Reserved */ u_char loadEject :1; /* Load or eject medium */ u_char start :1; /* Start or stop medium */ u_char control; /* See flags for common bits */ #else u_char command; /* command code, defined below. The * upper three bits of this are zero * to indicate the control block is * only 6 bytes long */ u_char immed :1; /* Immediate status bit */ u_char pad1 :4; /* Reserved */ u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ u_char pad2; /* Reserved */ u_char pad3; /* Reserved */ u_char start :1; /* Start or stop medium */ u_char loadEject :1; /* Load or eject medium */ u_char pad4 :6; /* Reserved */ u_char control; /* See flags for common bits */ #endif } ScsiStartStopCmd; /* * The standard group1 10-byte SCSI control block. Note that the * fields between highAddr and blockCount inclusive are command dependent. * The definitions Addr and BlockCount cover most of the commands we will * use. */ typedef struct ScsiGroup1Cmd { u_char command; /* command code, defined below. The * upper three bits of this are zero * to indicate the control block is * only 6 bytes long */ #if BYTE_ORDER == BIG_ENDIAN u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ u_char pad1 :5; /* Reserved */ #else u_char pad1 :5; /* Reserved */ u_char unitNumber :3; /* Logical Unit (LUN) to which to * pass the command. The device * has already been selected using * the "targetID" bit. */ #endif u_char highAddr; /* High bits of address */ u_char midHighAddr; /* Middle high bits of address */ u_char midLowAddr; /* Middle low bits of address */ u_char lowAddr; /* Low bits of address */ u_char pad2; /* Reserved */ u_char highBlockCount; /* High bits of blocks to transfer */ u_char lowBlockCount; /* Low bits of blocks to transfer */ u_char control; /* See flags for common bits */ } ScsiGroup1Cmd; /* * SCSI status completion information. * This is returned by the device when a command completes. */ #define SCSI_STATUS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */ #define SCSI_STATUS_CONDMET 0x04 /* Condition Met (ie., search worked) */ #define SCSI_STATUS_BUSY 0x08 #define SCSI_STATUS_INTERMED 0x10 /* Intermediate status sent */ #define SCSI_STATUS_EXT 0x80 /* Extended status valid */ /* * Sense information provided after some errors. This is divided into * two kinds, classes 0-6, and class 7. This is 30 bytes big to allow * for the drive specific sense bytes that follow the standard 4 byte header. * * For extended sense, this buffer may be cast into another type. Also * The actual size of the sense data returned is used to detect what * kind of tape drive is out there. Kludgy, but true. */ typedef struct ScsiClass0Sense { #if BYTE_ORDER == BIG_ENDIAN u_char valid :1; /* Sense data is valid */ u_char error :7; /* 3 bits class and 4 bits code */ #else u_char error :7; /* 3 bits class and 4 bits code */ u_char valid :1; /* Sense data is valid */ #endif u_char highAddr; /* High byte of block address */ u_char midAddr; /* Middle byte of block address */ u_char lowAddr; /* Low byte of block address */ u_char sense[26]; /* Target specific sense data */ } ScsiClass0Sense; /* * Definitions for errors in the sense data. The error field is specified * as a 3 bit class and 4 bit code, but it is easier to treat it as a * single 7 bit field. */ #define SCSI_NO_SENSE_DATA 0x00 #define SCSI_NOT_READY 0x04 #define SCSI_NOT_LOADED 0x09 #define SCSI_INSUF_CAPACITY 0x0a #define SCSI_HARD_DATA_ERROR 0x11 #define SCSI_WRITE_PROTECT 0x17 #define SCSI_CORRECTABLE_ERROR 0x18 #define SCSI_FILE_MARK 0x1c #define SCSI_INVALID_COMMAND 0x20 #define SCSI_UNIT_ATTENTION 0x30 #define SCSI_END_OF_MEDIA 0x34 /* * The standard "extended" sense data returned by SCSI devices. This * has an error field of 0x70, for a "class 7" error. */ typedef struct ScsiClass7Sense { #if BYTE_ORDER == BIG_ENDIAN u_char valid :1; /* Sense data is valid */ u_char error7 :7; /* == 0x70 */ u_char pad1; /* Also "segment number" for copy */ u_char fileMark :1; /* File mark on device */ u_char endOfMedia :1; /* End of media reached */ u_char badBlockLen :1; /* Block length mis-match (Exabyte) */ u_char pad2 :1; u_char key :4; /* Sense keys defined below */ u_char info1; /* Information byte 1 */ u_char info2; /* Information byte 2 */ u_char info3; /* Information byte 3 */ u_char info4; /* Information byte 4 */ u_char length; /* Number of additional info bytes */ #else u_char error7 :7; /* == 0x70 */ u_char valid :1; /* Sense data is valid */ u_char pad1; /* Also "segment number" for copy */ u_char key :4; /* Sense keys defined below */ u_char pad2 :1; u_char badBlockLen :1; /* Block length mis-match (Exabyte) */ u_char endOfMedia :1; /* End of media reached */ u_char fileMark :1; /* File mark on device */ u_char info1; /* Information byte 1 */ u_char info2; /* Information byte 2 */ u_char info3; /* Information byte 3 */ u_char info4; /* Information byte 4 */ u_char length; /* Number of additional info bytes */ #endif } ScsiClass7Sense; /* 8 Bytes */ /* * Key values for standardized sense class 7. */ #define SCSI_CLASS7_NO_SENSE 0 #define SCSI_CLASS7_RECOVERABLE 1 #define SCSI_CLASS7_NOT_READY 2 #define SCSI_CLASS7_MEDIA_ERROR 3 #define SCSI_CLASS7_HARDWARE_ERROR 4 #define SCSI_CLASS7_ILLEGAL_REQUEST 5 /* * These seem to have different meanings to different vendors.... */ #define SCSI_CLASS7_MEDIA_CHANGE 6 #define SCSI_CLASS7_UNIT_ATTN 6 #define SCSI_CLASS7_WRITE_PROTECT 7 #define SCSI_CLASS7_BLANK_CHECK 8 #define SCSI_CLASS7_VENDOR 9 #define SCSI_CLASS7_POWER_UP_FAILURE 10 #define SCSI_CLASS7_ABORT 11 #define SCSI_CLASS7_EQUAL 12 #define SCSI_CLASS7_OVERFLOW 13 #define SCSI_CLASS7_RESERVED_14 14 #define SCSI_CLASS7_RESERVED_15 15 /* * Data return by the SCSI inquiry command. */ typedef struct ScsiInquiryData { #if BYTE_ORDER == BIG_ENDIAN u_char type; /* Peripheral Device type. See below. */ u_char rmb:1; /* Removable Medium bit. */ u_char qualifier:7; /* Device type qualifier. */ u_char version; /* Version info. */ u_char reserved:4; /* reserved. */ u_char format:4; /* Response format. */ u_char length; /* length of data returned. */ u_char reserved2[2]; /* Reserved */ u_char flags; /* SCSI II flags (see below) */ u_char vendorID[8]; /* Vendor ID (ASCII) */ u_char productID[16]; /* Product ID (ASCII) */ u_char revLevel[4]; /* Revision level (ASCII) */ u_char revData[8]; /* Revision data (ASCII) */ #else u_char type; /* Peripheral Device type. See below. */ u_char qualifier:7; /* Device type qualifier. */ u_char rmb:1; /* Removable Medium bit. */ u_char version; /* Version info. */ u_char format:4; /* Response format. */ u_char reserved:4; /* reserved. */ u_char length; /* length of data returned. */ u_char reserved2[2]; /* Reserved */ u_char flags; /* SCSI II flags (see below) */ u_char vendorID[8]; /* Vendor ID (ASCII) */ u_char productID[16]; /* Product ID (ASCII) */ u_char revLevel[4]; /* Revision level (ASCII) */ u_char revData[8]; /* Revision data (ASCII) */ #endif } ScsiInquiryData; /* * The SCSI Peripheral type ID codes as return by the SCSI_INQUIRY command. * * SCSI_DISK_TYPE - Direct Access Device. * SCSI_TAPE_TYPE - Sequential Access Device. * SCSI_PRINTER_TYPE - Printer Device. * SCSI_HOST_TYPE - Processor Device. * SCSI_WORM_TYPE - Write-Once Read-Multiple Device. * SCSI_ROM_TYPE - Read-Only Direct Access Device. * SCSI_SCANNER_TYPE - Scanner device. * SCSI_OPTICAL_MEM_TYPE - Optical memory device. * SCSI_MEDIUM_CHANGER_TYPE - Medium changer device. * SCSI_COMMUNICATIONS_TYPE - Communications device. * SCSI_NODEVICE_TYPE - Logical Unit not present or implemented. * * Note that codes 0xa-0x7e are reserved and 0x80-0xff are vendor unique. */ #define SCSI_DISK_TYPE 0 #define SCSI_TAPE_TYPE 1 #define SCSI_PRINTER_TYPE 2 #define SCSI_HOST_TYPE 3 #define SCSI_WORM_TYPE 4 #define SCSI_ROM_TYPE 5 #define SCSI_SCANNER_TYPE 6 #define SCSI_OPTICAL_MEM_TYPE 7 #define SCSI_MEDIUM_CHANGER_TYPE 8 #define SCSI_COMMUNICATIONS_TYPE 9 #define SCSI_NODEVICE_TYPE 0x7f /* * The SCSI I & II inquiry flags. * * SCSI_REL_ADR - Relative addressing supported. * SCSI_WIDE_32 - 32 bit wide SCSI bus transfers supported. * SCSI_WIDE_16 - 16 bit wide SCSI bus transfers supported. * SCSI_SYNC - Synchronous data transfers supported. * SCSI_LINKED - Linked commands supported. * SCSI_CMD_QUEUE - Tagged command queuing supported. * SCSI_SOFT_RESET - Soft RESET alternative suported. */ #define SCSI_REL_ADR 0x80 #define SCSI_WIDE_32 0x40 #define SCSI_WIDE_16 0x20 #define SCSI_SYNC 0x10 #define SCSI_LINKED 0x08 #define SCSI_CMD_QUEUE 0x02 #define SCSI_SOFT_RESET 0x01 /* * Standard header for SCSI_MODE_SENSE and SCSI_MODE_SELECT commands for tapes. */ typedef struct ScsiTapeModeSelectHdr { u_char len; /* length */ u_char media; /* media type */ #if BYTE_ORDER == BIG_ENDIAN u_char writeprot:1; /* Write protected media */ u_char bufferedMode:3; /* Type of buffer to be done. */ u_char speed:4; /* Drive speed. */ #else u_char speed:4; /* Drive speed. */ u_char bufferedMode:3; /* Type of buffer to be done. */ u_char writeprot:1; /* Write protected media */ #endif u_char length; /* Block descriptor length. */ u_char density; /* tape density code */ u_char blocks_2; /* number of blocks (MSB) */ u_char blocks_1; /* number of blocks */ u_char blocks_0; /* number of blocks (LSB) */ u_char reserved; /* */ u_char block_size2; /* Tape block size (MSB) */ u_char block_size1; /* Tape block size */ u_char block_size0; /* Tape block size (LSB) */ u_char vendor[6]; /* vendor specific data */ } ScsiTapeModeSelectHdr; /* * Definitions of SCSI messages. * * SCSI_COMMAND_COMPLETE - After a command has completed, successfully * or not, this is returned to the host from the target. * * SCSI_EXTENDED_MSG - Indicates that a multi-byte message is being sent. * * The following messages are used with connect/disconnect: * SCSI_SAVE_DATA_POINTER - Sent from target to host to request saving * of current DMA address and count. Indicates a pending dis-connect. * SCSI_RESTORE_POINTER - Sent from the target to the host to request * restoring pointers saved before a disconnect * SCSI_DISCONNECT - Sent from the target to the host to disconnect. * SCSI_ABORT - Sent from the host to the target to abort current request. * SCSI_MESSAGE_REJECT - Indicates receipt, by either host or target, of * an unimplemented message. * SCSI_NO_OP - Sent from host to target if it has no real message to send. * SCSI_MESSAGE_PARITY_ERROR - Sent from host to target on message parity error * SCSI_BUS_RESET - Sent from host to target to reset all current I/O * * SCSI_IDENTIFY - The low order two bits of this message type indicate * the Logical Unit of the Target which is requesting a reconnect. * SCSI_DIS_REC_IDENTIFY - Sent from the host to a target to indicate * is supports connect/dis-connect * */ #define SCSI_COMMAND_COMPLETE 0x00 #define SCSI_EXTENDED_MSG 0x01 #define SCSI_SAVE_DATA_POINTER 0x02 #define SCSI_RESTORE_POINTERS 0x03 #define SCSI_DISCONNECT 0x04 #define SCSI_ABORT 0x06 #define SCSI_MESSAGE_REJECT 0x07 #define SCSI_NO_OP 0x08 #define SCSI_MESSAGE_PARITY_ERROR 0x09 #define SCSI_LINKED_CMD_COMPLETE 0x0A #define SCSI_LINKED_FLAGED_CMD_COMPLETE 0x0B #define SCSI_BUS_RESET 0x0C #define SCSI_IDENTIFY 0x80 #define SCSI_DIS_REC_IDENTIFY 0xc0 /* * Extended message types (2nd byte of SCSI_EXTENDED_MSG). */ #define SCSI_MODIFY_DATA_PTR 0x00 #define SCSI_SYNCHRONOUS_XFER 0x01 #define SCSI_EXTENDED_IDENTIFY 0x02 /* only in SCSI I */ #define SCSI_WIDE_XFER 0x03 /* * Driver ioctl's for various scsi operations. */ #ifndef _IOCTL_ #include #endif /* * Control for SCSI "format" mode. * * "Format" mode allows a privileged process to issue direct SCSI * commands to a drive (it is intended primarily to allow on-line * formatting). SDIOCSFORMAT with a non-zero arg will put the drive * into format mode; a zero arg will take it out. When in format * mode, only the process that issued the SDIOCFORMAT can read or * write the drive. * * In format mode, process is expected to * - do SDIOCSCSICOMMAND to supply cdb for next SCSI op * - do read or write as appropriate for cdb * - if i/o error, optionally do SDIOCSENSE to get completion * status and sense data from last scsi operation. */ struct scsi_fmt_cdb { int len; /* cdb length (in bytes) */ u_char cdb[28]; /* cdb to use on next read/write */ }; struct scsi_fmt_sense { u_int status; /* completion status of last op */ u_char sense[32]; /* sense data (if any) from last op */ }; #define SDIOCSFORMAT _IOW('S', 0x1, int) #define SDIOCGFORMAT _IOR('S', 0x2, int) #define SDIOCSCSICOMMAND _IOW('S', 0x3, struct scsi_fmt_cdb) #define SDIOCSENSE _IOR('S', 0x4, struct scsi_fmt_sense) #endif /* _SCSI_H */